Description:
Loctite Power Grab Ultimate is the latest in Construction Adhesive technology, with its unique formula that bonds to the most surfaces, under the most conditions. Loctite power grab ultimate is an all-weather adhesive that provides stronger and faster initial tack than traditional power grab. It can be applied to wet surfaces as well as non-porous surfaces, which most construction adhesives cannot do. This product also can be applied in a wide temperature range, from 0-140 degree F, on both interior and exterior projects.
Reviews:
5.0 out of 5 stars Used to bond FRP to mild steel.
This stuff is the bomb! I searched all over for a product that could be used to bond fiber reinforced panels to a welded steel garage door frame. This worked great under tough conditions.I can't speak to the normal time to set but, even in proper temperature conditions, I think this material will require clamping to hold on vertical surface.. I did not use it in anywhere near optimum (or even recommended) conditions. I used this on the frames of an exterior garage swing door and did so last April in record cold. Nights were in the high 20s Fahrenheit. Daytime highs of no more than 55. I could not close the doors due to the clamps. I do not recommend this application environment and doubt the manufacturer would either. However, this stuff dried to a tough, slightly pliable bond within 24-36 hours. Again, no idea of set time in proper conditions.I also applied the FRP to older steel with a significant patina of rust. I did use an angle grinder to remove a couple of sections of heavier scale, but that's it. This stuff grabbed tight.I got about 90 feet of medium bead per tube and used the excess for a variety of other applications including bonding plastic (polyethylene) and veneer to plywood.Great stuff!
5.0 out of 5 stars One of the few construction adhesives for bonding two non-porous materials
I was bonding aluminum-to-aluminum and aluminum-to-PVC, both non-porous materials, so I did a lot of research on construction adhesives and found that most of them require at least one of the two mating materials to be porous in order to adhere properly. This one does not require that -- it specifically states that it will bond two non-porous materials. Cure time to full strength will be slower though.I watched a lot of construction adhesive review materials where various presenters try to determine the relative bond strength of different brands of construction adhesive. I found most of those experiments are flawed in one way or another. For example many just wait overnight, despite the fact that this adhesive and several others can take days to reach full strength. Other videos test with some rod cantilevered out of a glob of construction adhesive, ignoring the fact that that is not how you should use construction adhesive and most applications are going to apply compression and sheer forces (not "pull-out" leverage where an object is twisted out of the joint).I think all construction adhesives are about the same strength, and if the joint coming free is a major concern, you are probably misusing construction adhesive and should consider using mechanical fasters or epoxy.
5.0 out of 5 stars Great adhesive
Great adhesive.Case and glue are both thick. Flow is smoother if warm when applying.Some chalk guns will have problems.I like the larger temperature range for applying and short grab time.I applied several times at the low end of temperature range and it still worked well.In colder weather I had to prop glued items a few times. Warmer applications grabbed and stayed in place much faster.
4.0 out of 5 stars Hard to use? Nuke it
Like a number of other reviewers, I found this very hard to use. As much as I squeezed the trigger on the gun, very little came out. I needed to soften it up, so I put the tube (without the metal gun) in the microwave for 30 seconds. That did the trick!Depending on how long you're working, you may need to re-heat it. Be careful - heat it too much and it might explode in your microwave. Also, as you use up the product, there is less to heat so you might want to cut back on the number of seconds.
5.0 out of 5 stars it holds & good value
it holds good value
1.0 out of 5 stars Defective tube
Defective tube. Cut the nub. Poked through the foil. Tried in two guns. Could not extract any glue. Complete waste of money.
5.0 out of 5 stars Holding tight
Use this to hold the rubber synthetic garage door seal to the concrete floor. It worked and that's all I needed.
5.0 out of 5 stars Worked great!
I bought this adhesive to attach faux brick panels to the side of the house. Panels were made of Styrofoam and I was attaching to a wood surface, the adhesive held great, no need for bracing, just pushed on to adhere, and it stayed.
Good stuff
Tube needs to be put in HOT water for about 30 minutes before it will flow out of tube.
This is an amazing product.
I sticked a huge 3ft x 4ft cabinet on my bathroom wall with this construction adhesive without any nails and it did the job.The cabinet was heavy. And its hanging strongly. 5Star
Excellent polymer but the syringe needs a plunger
The polymer binds very well, as claimed. However, without a plunger, very difficult to get the polymer out and leads to wastage and breakages
Great for styrofoam
We used it for styrofoam ceiling panels. It worked excellent. A little thick to pump out t worded
Great glue for exterior bricks and garden stones.
The only thing I wish they had was a resealable cap
Visit the Loctite Store
Loctite Power Grab Ultimate Construction Adhesive, 9 fl oz Cartridge, 1 Pack - Versatile High Strength, Wide Temperature Range Construction Glue
AED7420
Quantity:
Order today to get by 7-14 business days
Delivery fee of AED 20. Free for orders above AED 200.
Imported From: United States
At BOLO, we work hard to ensure the products you receive are new, genuine, and sourced from reputable suppliers.
BOLO is not an authorized or official retailer for most brands, nor are we affiliated with manufacturers unless specifically stated on a product page. Instead, we source verified sellers, authorized distributors or directly from the manufacturer.
Each product undergoes thorough inspection and verification at our consolidation and fulfilment centers to ensure it meets our strict authenticity and quality standards before being shipped and delivered to you.
If you ever have concerns regarding the authenticity of a product purchased from us, please contact Bolo Support. We will review your inquiry promptly and, if necessary, provide documentation verifying authenticity or offer a suitable resolution.
Your trust is our top priority, and we are committed to maintaining transparency and integrity in every transaction.
All product information, images, descriptions, and reviews originate from the manufacturer or from trusted sellers overseas. BOLO is not affiliated with, endorsed by, or an authorized retailer for most brands listed on our website unless stated otherwise.
While we strive to display accurate information, variations in packaging, labeling, instructions, or formulation may occasionally occur due to regional differences or supplier updates. For detailed or manufacturer-specific information, please contact the brand directly or reach out to BOLO Support for assistance.
Unless otherwise stated, all prices displayed on the product page include applicable taxes and import duties.
BOLO operates in accordance with the laws and regulations of United Arab Emirates. Any items found to be restricted or prohibited for sale within the UAE will be cancelled prior to shipment. We take proactive measures to ensure that only products permitted for sale in United Arab Emirates are listed on our website.
All items are shipped by air, and any products classified as “Dangerous Goods (DG)” under IATA regulations will be removed from the order and cancelled.
All orders are processed manually, and we make every effort to process them promptly once confirmed. Products cancelled due to the above reasons will be permanently removed from listings across the website.
Similar suggestions by Bolo
More from this brand
Similar items from “Adhesives & Mortars”
Share with
Or share with link
https://www.bolo.ae/products/UO0SU5CEO88
Visit the Loctite Store
Loctite Power Grab Ultimate Construction Adhesive, 9 fl oz Cartridge, 1 Pack - Versatile High Strength, Wide Temperature Range Construction Glue
AED7420
Quantity:
Order today to get by 7-14 business days
Delivery fee of AED 20. Free for orders above AED 200.
Imported From: United States
At BOLO, we work hard to ensure the products you receive are new, genuine, and sourced from reputable suppliers.
BOLO is not an authorized or official retailer for most brands, nor are we affiliated with manufacturers unless specifically stated on a product page. Instead, we source verified sellers, authorized distributors or directly from the manufacturer.
Each product undergoes thorough inspection and verification at our consolidation and fulfilment centers to ensure it meets our strict authenticity and quality standards before being shipped and delivered to you.
If you ever have concerns regarding the authenticity of a product purchased from us, please contact Bolo Support. We will review your inquiry promptly and, if necessary, provide documentation verifying authenticity or offer a suitable resolution.
Your trust is our top priority, and we are committed to maintaining transparency and integrity in every transaction.
All product information, images, descriptions, and reviews originate from the manufacturer or from trusted sellers overseas. BOLO is not affiliated with, endorsed by, or an authorized retailer for most brands listed on our website unless stated otherwise.
While we strive to display accurate information, variations in packaging, labeling, instructions, or formulation may occasionally occur due to regional differences or supplier updates. For detailed or manufacturer-specific information, please contact the brand directly or reach out to BOLO Support for assistance.
Unless otherwise stated, all prices displayed on the product page include applicable taxes and import duties.
BOLO operates in accordance with the laws and regulations of United Arab Emirates. Any items found to be restricted or prohibited for sale within the UAE will be cancelled prior to shipment. We take proactive measures to ensure that only products permitted for sale in United Arab Emirates are listed on our website.
All items are shipped by air, and any products classified as “Dangerous Goods (DG)” under IATA regulations will be removed from the order and cancelled.
All orders are processed manually, and we make every effort to process them promptly once confirmed. Products cancelled due to the above reasons will be permanently removed from listings across the website.
Description:
Loctite Power Grab Ultimate is the latest in Construction Adhesive technology, with its unique formula that bonds to the most surfaces, under the most conditions. Loctite power grab ultimate is an all-weather adhesive that provides stronger and faster initial tack than traditional power grab. It can be applied to wet surfaces as well as non-porous surfaces, which most construction adhesives cannot do. This product also can be applied in a wide temperature range, from 0-140 degree F, on both interior and exterior projects.
Reviews:
5.0 out of 5 stars Used to bond FRP to mild steel.
This stuff is the bomb! I searched all over for a product that could be used to bond fiber reinforced panels to a welded steel garage door frame. This worked great under tough conditions.I can't speak to the normal time to set but, even in proper temperature conditions, I think this material will require clamping to hold on vertical surface.. I did not use it in anywhere near optimum (or even recommended) conditions. I used this on the frames of an exterior garage swing door and did so last April in record cold. Nights were in the high 20s Fahrenheit. Daytime highs of no more than 55. I could not close the doors due to the clamps. I do not recommend this application environment and doubt the manufacturer would either. However, this stuff dried to a tough, slightly pliable bond within 24-36 hours. Again, no idea of set time in proper conditions.I also applied the FRP to older steel with a significant patina of rust. I did use an angle grinder to remove a couple of sections of heavier scale, but that's it. This stuff grabbed tight.I got about 90 feet of medium bead per tube and used the excess for a variety of other applications including bonding plastic (polyethylene) and veneer to plywood.Great stuff!
5.0 out of 5 stars One of the few construction adhesives for bonding two non-porous materials
I was bonding aluminum-to-aluminum and aluminum-to-PVC, both non-porous materials, so I did a lot of research on construction adhesives and found that most of them require at least one of the two mating materials to be porous in order to adhere properly. This one does not require that -- it specifically states that it will bond two non-porous materials. Cure time to full strength will be slower though.I watched a lot of construction adhesive review materials where various presenters try to determine the relative bond strength of different brands of construction adhesive. I found most of those experiments are flawed in one way or another. For example many just wait overnight, despite the fact that this adhesive and several others can take days to reach full strength. Other videos test with some rod cantilevered out of a glob of construction adhesive, ignoring the fact that that is not how you should use construction adhesive and most applications are going to apply compression and sheer forces (not "pull-out" leverage where an object is twisted out of the joint).I think all construction adhesives are about the same strength, and if the joint coming free is a major concern, you are probably misusing construction adhesive and should consider using mechanical fasters or epoxy.
5.0 out of 5 stars Great adhesive
Great adhesive.Case and glue are both thick. Flow is smoother if warm when applying.Some chalk guns will have problems.I like the larger temperature range for applying and short grab time.I applied several times at the low end of temperature range and it still worked well.In colder weather I had to prop glued items a few times. Warmer applications grabbed and stayed in place much faster.
4.0 out of 5 stars Hard to use? Nuke it
Like a number of other reviewers, I found this very hard to use. As much as I squeezed the trigger on the gun, very little came out. I needed to soften it up, so I put the tube (without the metal gun) in the microwave for 30 seconds. That did the trick!Depending on how long you're working, you may need to re-heat it. Be careful - heat it too much and it might explode in your microwave. Also, as you use up the product, there is less to heat so you might want to cut back on the number of seconds.
5.0 out of 5 stars it holds & good value
it holds good value
1.0 out of 5 stars Defective tube
Defective tube. Cut the nub. Poked through the foil. Tried in two guns. Could not extract any glue. Complete waste of money.
5.0 out of 5 stars Holding tight
Use this to hold the rubber synthetic garage door seal to the concrete floor. It worked and that's all I needed.
5.0 out of 5 stars Worked great!
I bought this adhesive to attach faux brick panels to the side of the house. Panels were made of Styrofoam and I was attaching to a wood surface, the adhesive held great, no need for bracing, just pushed on to adhere, and it stayed.
Good stuff
Tube needs to be put in HOT water for about 30 minutes before it will flow out of tube.
This is an amazing product.
I sticked a huge 3ft x 4ft cabinet on my bathroom wall with this construction adhesive without any nails and it did the job.The cabinet was heavy. And its hanging strongly. 5Star
Excellent polymer but the syringe needs a plunger
The polymer binds very well, as claimed. However, without a plunger, very difficult to get the polymer out and leads to wastage and breakages
Great for styrofoam
We used it for styrofoam ceiling panels. It worked excellent. A little thick to pump out t worded
Great glue for exterior bricks and garden stones.
The only thing I wish they had was a resealable cap
Similar suggestions by Bolo
More from this brand
Similar items from “Adhesives & Mortars”
Share with
Or share with link
https://www.bolo.ae/products/UO0SU5CEO88