Description:
Reviews:
5.0 out of 5 stars Works perfect as advertised.
First time creating silicone molds or using this product and was a little skeptical based on some of the negative reviews. I do have to say that was able to create a very small detail mold of Hotwheels wheels in my first attempt. Follow the directions from the manufacturer and the small detailed mold came out perfect.I let it sit a couple of minutes so air bubbles would dissipate and pour onto my model and the results were impressive.I’ll continue to use it and recommend it, specially for the lower price that’s comparable products.
5.0 out of 5 stars High detail good quality
Purchased several times and love it. High quality silicone mold. Picks up tons of detail. The mold come out very rubbery and maintains it original shape perfectly and long as you follow the instructions. I accidentally had my ration off once and one corner of my mold started to degrade and pull apart. That has only happened once but every other time they molds have come out perfectly. Easy to use but quite expensive. I only ever had one mold get stuck to the original frame because I did not treat the raw wood it was touching.
5.0 out of 5 stars Great casting silicone
Great product. Viscosity was I bit lower than I expected, but worked really well. I 3d printed a mold using pla and injected into a cavity with a syringe. A few tips.Mold design.Alow for the mold to have a runner to fill from the bottom. At the top vent, have a well that will over fill the cavity by maybe 5% of the volume. This allows degassing and leakage to keep your cavity from ending up short.Coat the mold with petroleum jelly lightly with a brush. Release will be great and product will still cure.Olive oil keeps the product from curing for some reason.Durometer tested at a shore A 17 for me. Close enough to the advertised 15 imo.The product seems to have good air release. I de gassed in the syringe by holding my finger over the end and pulling a vacuum multiple times.
5.0 out of 5 stars Easy to pour, mix - consistent results
Easy to work with, pretty quick cure time around 4-6 hours around 74 degrees, it felt like temperature had a big impact so if it's colder where you are id expect it to take longer, err on the safe side. If you have a warming mat that will definitely help speed things up. Mix 1-1 by weight, not volume.Will not cure if trying to make a mold from a piece of UV resin, at least not without a product like inhibit-x which I didn't have. Not the product's fault, just a word of warning.
4.0 out of 5 stars worked well and captured detail well
it performed well very flexable after set up. just was a little tacky and i mixed it well. I would use it again though
5.0 out of 5 stars Great product
Great product
5.0 out of 5 stars Works great
Really easier then I thought can't wait to do more
5.0 out of 5 stars Easy to Use
Worked exactly as intended. Used for a 3d printed project, turning scrap into something. Mold worked on the first try despite measuring. Was easy to clean and remove object. The directions could not be any more clear.
Visit the MITINU Store
MITINU Silicone Mold Making Kit, 38.8oz 15A Elastic Liquid Silica Gel for Casting Resin molds and Candle & Soap Mold,Fast Cure Translucent Platinum Silicone Rubber
AED15000
Quantity:
Order today to get by 7-14 business days
Delivery fee of AED 20. Free for orders above AED 200.
Imported From: United States
At BOLO, we work hard to ensure the products you receive are new, genuine, and sourced from reputable suppliers.
BOLO is not an authorized or official retailer for most brands, nor are we affiliated with manufacturers unless specifically stated on a product page. Instead, we source verified sellers, authorized distributors or directly from the manufacturer.
Each product undergoes thorough inspection and verification at our consolidation and fulfilment centers to ensure it meets our strict authenticity and quality standards before being shipped and delivered to you.
If you ever have concerns regarding the authenticity of a product purchased from us, please contact Bolo Support. We will review your inquiry promptly and, if necessary, provide documentation verifying authenticity or offer a suitable resolution.
Your trust is our top priority, and we are committed to maintaining transparency and integrity in every transaction.
All product information, images, descriptions, and reviews originate from the manufacturer or from trusted sellers overseas. BOLO is not affiliated with, endorsed by, or an authorized retailer for most brands listed on our website unless stated otherwise.
While we strive to display accurate information, variations in packaging, labeling, instructions, or formulation may occasionally occur due to regional differences or supplier updates. For detailed or manufacturer-specific information, please contact the brand directly or reach out to BOLO Support for assistance.
Unless otherwise stated, all prices displayed on the product page include applicable taxes and import duties.
BOLO operates in accordance with the laws and regulations of United Arab Emirates. Any items found to be restricted or prohibited for sale within the UAE will be cancelled prior to shipment. We take proactive measures to ensure that only products permitted for sale in United Arab Emirates are listed on our website.
All items are shipped by air, and any products classified as “Dangerous Goods (DG)” under IATA regulations will be removed from the order and cancelled.
All orders are processed manually, and we make every effort to process them promptly once confirmed. Products cancelled due to the above reasons will be permanently removed from listings across the website.
More from this brand
Similar items from “Molding & Casting”
Share with
Or share with link
https://www.bolo.ae/products/UO0Q5PLC4O8
Visit the MITINU Store
MITINU Silicone Mold Making Kit, 38.8oz 15A Elastic Liquid Silica Gel for Casting Resin molds and Candle & Soap Mold,Fast Cure Translucent Platinum Silicone Rubber
AED15000
Quantity:
Order today to get by 7-14 business days
Delivery fee of AED 20. Free for orders above AED 200.
Imported From: United States
At BOLO, we work hard to ensure the products you receive are new, genuine, and sourced from reputable suppliers.
BOLO is not an authorized or official retailer for most brands, nor are we affiliated with manufacturers unless specifically stated on a product page. Instead, we source verified sellers, authorized distributors or directly from the manufacturer.
Each product undergoes thorough inspection and verification at our consolidation and fulfilment centers to ensure it meets our strict authenticity and quality standards before being shipped and delivered to you.
If you ever have concerns regarding the authenticity of a product purchased from us, please contact Bolo Support. We will review your inquiry promptly and, if necessary, provide documentation verifying authenticity or offer a suitable resolution.
Your trust is our top priority, and we are committed to maintaining transparency and integrity in every transaction.
All product information, images, descriptions, and reviews originate from the manufacturer or from trusted sellers overseas. BOLO is not affiliated with, endorsed by, or an authorized retailer for most brands listed on our website unless stated otherwise.
While we strive to display accurate information, variations in packaging, labeling, instructions, or formulation may occasionally occur due to regional differences or supplier updates. For detailed or manufacturer-specific information, please contact the brand directly or reach out to BOLO Support for assistance.
Unless otherwise stated, all prices displayed on the product page include applicable taxes and import duties.
BOLO operates in accordance with the laws and regulations of United Arab Emirates. Any items found to be restricted or prohibited for sale within the UAE will be cancelled prior to shipment. We take proactive measures to ensure that only products permitted for sale in United Arab Emirates are listed on our website.
All items are shipped by air, and any products classified as “Dangerous Goods (DG)” under IATA regulations will be removed from the order and cancelled.
All orders are processed manually, and we make every effort to process them promptly once confirmed. Products cancelled due to the above reasons will be permanently removed from listings across the website.
Description:
Reviews:
5.0 out of 5 stars Works perfect as advertised.
First time creating silicone molds or using this product and was a little skeptical based on some of the negative reviews. I do have to say that was able to create a very small detail mold of Hotwheels wheels in my first attempt. Follow the directions from the manufacturer and the small detailed mold came out perfect.I let it sit a couple of minutes so air bubbles would dissipate and pour onto my model and the results were impressive.I’ll continue to use it and recommend it, specially for the lower price that’s comparable products.
5.0 out of 5 stars High detail good quality
Purchased several times and love it. High quality silicone mold. Picks up tons of detail. The mold come out very rubbery and maintains it original shape perfectly and long as you follow the instructions. I accidentally had my ration off once and one corner of my mold started to degrade and pull apart. That has only happened once but every other time they molds have come out perfectly. Easy to use but quite expensive. I only ever had one mold get stuck to the original frame because I did not treat the raw wood it was touching.
5.0 out of 5 stars Great casting silicone
Great product. Viscosity was I bit lower than I expected, but worked really well. I 3d printed a mold using pla and injected into a cavity with a syringe. A few tips.Mold design.Alow for the mold to have a runner to fill from the bottom. At the top vent, have a well that will over fill the cavity by maybe 5% of the volume. This allows degassing and leakage to keep your cavity from ending up short.Coat the mold with petroleum jelly lightly with a brush. Release will be great and product will still cure.Olive oil keeps the product from curing for some reason.Durometer tested at a shore A 17 for me. Close enough to the advertised 15 imo.The product seems to have good air release. I de gassed in the syringe by holding my finger over the end and pulling a vacuum multiple times.
5.0 out of 5 stars Easy to pour, mix - consistent results
Easy to work with, pretty quick cure time around 4-6 hours around 74 degrees, it felt like temperature had a big impact so if it's colder where you are id expect it to take longer, err on the safe side. If you have a warming mat that will definitely help speed things up. Mix 1-1 by weight, not volume.Will not cure if trying to make a mold from a piece of UV resin, at least not without a product like inhibit-x which I didn't have. Not the product's fault, just a word of warning.
4.0 out of 5 stars worked well and captured detail well
it performed well very flexable after set up. just was a little tacky and i mixed it well. I would use it again though
5.0 out of 5 stars Great product
Great product
5.0 out of 5 stars Works great
Really easier then I thought can't wait to do more
5.0 out of 5 stars Easy to Use
Worked exactly as intended. Used for a 3d printed project, turning scrap into something. Mold worked on the first try despite measuring. Was easy to clean and remove object. The directions could not be any more clear.
More from this brand
Similar items from “Molding & Casting”
Share with
Or share with link
https://www.bolo.ae/products/UO0Q5PLC4O8