Description:
Reviews:
5.0 out of 5 stars Fits perfectly, good quality
So, I ordered all three cause it was pretty cheap to do so. I only needed the wishbone and it fit perfectly. I am a master you tube mechanic. lol . Worth the money. Easy install. Seems to be quality made. Motor did not move anymore when going from park to either reverse or drive. Would buy again
5.0 out of 5 stars Helps with excess engine movement
In my ongoing attempts to remove rattles and thumps from my wife's van as it goes down the road, I decided to replace the engine/transmission mounts. The front mount I could clearly see had some cracks in the rubber and assumed the rest were probably in a similar condition. The mounts arrived fine and appear to be of good quality; there's no way to test the rubber strength other than to give them a go and see if they hold up. I did the front center mount first, that's the quick and easiest. You will need a jack; two is actually better. One to raise the center of the frame of the engine up a bit for more working room and then a second to push up on the oil pan a bit during the replacement to take weight off the mount. Take a look online at videos, they're easy to find and helpful to watch beforehand. The passenger side, under the air pan was almost as easy. I took a little extra time because I needed to replace the attached grounding wire (engine to frame) that had broken loose. For me, each of these two was maybe 30-45 minutes? On to the driver's side. This entails removing the battery and battery mount pan. Not too tough but takes a few minutes. There's 6 bolts for this one. 2 vertically oriented ones on the frame, 2 on the transmission and then 2 horizontal into the frame. These 2 horizontal are the sticking point in the process. Because of clearance issue at the bolt head, you must use a box wrench to remove, which is harder and slower, THEN when the bolt is about ready to come out, the transmission portion blocks it; the bolts seem too long. Again watch some videos. The trick is to try to work the head of the bolt into small cavities cast into the transmission portion (an upright rectangular "tower") and keep wiggling it. A magnet stick might help, also raising or lowering the transmission some to help with alignment can help. They WILL come out. To aid in putting them back in with the new mount, I first took those 2 bolts and ground down the bolt tips about an 1/8 inch, taking off most of the portion that doesn't have threads. This little trick saved me a LOT of hassle getting them re-inserted and they still threaded in perfectly fine. Line up the remaining 4 bolts, snug them up and take the jacks out, re-install battery and such. SO, I have NOT done the 4th mount yet, under the rear of the engine. Supposed to be the worst. In test drives, between this fix, a front brake job, and sway bar links/bushings, the car is MUCH quieter going over small bumps and road cracks. If I finish and go on to install the 4th mount, I'll update this review.
5.0 out of 5 stars Perfect Fit and Great Performance!
This engine motor mount kit was exactly what I needed for my 2012 Chevy Traverse 3.6L. All the mounts fit perfectly and matched the OEM specs. After installation, the engine vibrations were noticeably reduced and everything felt much smoother during acceleration and idle. The parts seem well-built and durable—definitely a great value compared to dealership prices. If you’re doing a replacement on a GM 3.6L SUV, this kit gets the job done right!
5.0 out of 5 stars Mounts
Great product, fits perfectly thank you
4.0 out of 5 stars Good-ish Budget Option 2006 Mercury Milan V6
Torque mount and engine mount fit well. Transmission mount was not easy to install and didn’t really fit well. Seemed like they got beat up in shipping; probably could’ve used more packing. But it didn’t affect how they functioned. Eliminated my vibration and completely changed how the car feels! (We’ll see)
5.0 out of 5 stars Will buy again if need
Fit and works good
1.0 out of 5 stars Rear mount does not fit a 2013 Jeep Patriot
The rear mount which came with this kit is a completely different size than what is being replaced on my 2013 Jeep Patriot. The Bolo fitment said it would be a fit for my vehicle, but it is not. The others appear to be good to go though. I suppose I will have to order another rear mount now. I would return it but I've already installed the others before discovering this... Bummer.In the attached photo, the original mount is on the left and the replacement is on the right.
5.0 out of 5 stars Great fit
Fit my 2014 town and country perfectly. Thankfully I can work on my own vehicles so installing these wasn’t too difficult. Good quality and exactly what was needed.
Visit the Yllhaoyuan Store
Engine Motor Mount Set 4Pcs Fits Do-dge Journey 2011-2019 3.6L AWD Automatic Transmission 3274 3167 3333 3246
AED73514
Quantity:
Order today to get by 7-14 business days
This item qualifies for free delivery
Imported From: United States
At BOLO, we work hard to ensure the products you receive are new, genuine, and sourced from reputable suppliers.
BOLO is not an authorized or official retailer for most brands, nor are we affiliated with manufacturers unless specifically stated on a product page. Instead, we source verified sellers, authorized distributors or directly from the manufacturer.
Each product undergoes thorough inspection and verification at our consolidation and fulfilment centers to ensure it meets our strict authenticity and quality standards before being shipped and delivered to you.
If you ever have concerns regarding the authenticity of a product purchased from us, please contact Bolo Support. We will review your inquiry promptly and, if necessary, provide documentation verifying authenticity or offer a suitable resolution.
Your trust is our top priority, and we are committed to maintaining transparency and integrity in every transaction.
All product information, images, descriptions, and reviews originate from the manufacturer or from trusted sellers overseas. BOLO is not affiliated with, endorsed by, or an authorized retailer for most brands listed on our website unless stated otherwise.
While we strive to display accurate information, variations in packaging, labeling, instructions, or formulation may occasionally occur due to regional differences or supplier updates. For detailed or manufacturer-specific information, please contact the brand directly or reach out to BOLO Support for assistance.
Unless otherwise stated, all prices displayed on the product page include applicable taxes and import duties.
BOLO operates in accordance with the laws and regulations of United Arab Emirates. Any items found to be restricted or prohibited for sale within the UAE will be cancelled prior to shipment. We take proactive measures to ensure that only products permitted for sale in United Arab Emirates are listed on our website.
All items are shipped by air, and any products classified as “Dangerous Goods (DG)” under IATA regulations will be removed from the order and cancelled.
All orders are processed manually, and we make every effort to process them promptly once confirmed. Products cancelled due to the above reasons will be permanently removed from listings across the website.
Similar suggestions by Bolo
More from this brand
Similar items from “Engine Mounts”
Share with
Or share with link
https://www.bolo.ae/products/UO0PZG7W5KJ
Visit the Yllhaoyuan Store
Engine Motor Mount Set 4Pcs Fits Do-dge Journey 2011-2019 3.6L AWD Automatic Transmission 3274 3167 3333 3246
AED73514
Quantity:
Order today to get by 7-14 business days
This item qualifies for free delivery
Imported From: United States
At BOLO, we work hard to ensure the products you receive are new, genuine, and sourced from reputable suppliers.
BOLO is not an authorized or official retailer for most brands, nor are we affiliated with manufacturers unless specifically stated on a product page. Instead, we source verified sellers, authorized distributors or directly from the manufacturer.
Each product undergoes thorough inspection and verification at our consolidation and fulfilment centers to ensure it meets our strict authenticity and quality standards before being shipped and delivered to you.
If you ever have concerns regarding the authenticity of a product purchased from us, please contact Bolo Support. We will review your inquiry promptly and, if necessary, provide documentation verifying authenticity or offer a suitable resolution.
Your trust is our top priority, and we are committed to maintaining transparency and integrity in every transaction.
All product information, images, descriptions, and reviews originate from the manufacturer or from trusted sellers overseas. BOLO is not affiliated with, endorsed by, or an authorized retailer for most brands listed on our website unless stated otherwise.
While we strive to display accurate information, variations in packaging, labeling, instructions, or formulation may occasionally occur due to regional differences or supplier updates. For detailed or manufacturer-specific information, please contact the brand directly or reach out to BOLO Support for assistance.
Unless otherwise stated, all prices displayed on the product page include applicable taxes and import duties.
BOLO operates in accordance with the laws and regulations of United Arab Emirates. Any items found to be restricted or prohibited for sale within the UAE will be cancelled prior to shipment. We take proactive measures to ensure that only products permitted for sale in United Arab Emirates are listed on our website.
All items are shipped by air, and any products classified as “Dangerous Goods (DG)” under IATA regulations will be removed from the order and cancelled.
All orders are processed manually, and we make every effort to process them promptly once confirmed. Products cancelled due to the above reasons will be permanently removed from listings across the website.
Description:
Reviews:
5.0 out of 5 stars Fits perfectly, good quality
So, I ordered all three cause it was pretty cheap to do so. I only needed the wishbone and it fit perfectly. I am a master you tube mechanic. lol . Worth the money. Easy install. Seems to be quality made. Motor did not move anymore when going from park to either reverse or drive. Would buy again
5.0 out of 5 stars Helps with excess engine movement
In my ongoing attempts to remove rattles and thumps from my wife's van as it goes down the road, I decided to replace the engine/transmission mounts. The front mount I could clearly see had some cracks in the rubber and assumed the rest were probably in a similar condition. The mounts arrived fine and appear to be of good quality; there's no way to test the rubber strength other than to give them a go and see if they hold up. I did the front center mount first, that's the quick and easiest. You will need a jack; two is actually better. One to raise the center of the frame of the engine up a bit for more working room and then a second to push up on the oil pan a bit during the replacement to take weight off the mount. Take a look online at videos, they're easy to find and helpful to watch beforehand. The passenger side, under the air pan was almost as easy. I took a little extra time because I needed to replace the attached grounding wire (engine to frame) that had broken loose. For me, each of these two was maybe 30-45 minutes? On to the driver's side. This entails removing the battery and battery mount pan. Not too tough but takes a few minutes. There's 6 bolts for this one. 2 vertically oriented ones on the frame, 2 on the transmission and then 2 horizontal into the frame. These 2 horizontal are the sticking point in the process. Because of clearance issue at the bolt head, you must use a box wrench to remove, which is harder and slower, THEN when the bolt is about ready to come out, the transmission portion blocks it; the bolts seem too long. Again watch some videos. The trick is to try to work the head of the bolt into small cavities cast into the transmission portion (an upright rectangular "tower") and keep wiggling it. A magnet stick might help, also raising or lowering the transmission some to help with alignment can help. They WILL come out. To aid in putting them back in with the new mount, I first took those 2 bolts and ground down the bolt tips about an 1/8 inch, taking off most of the portion that doesn't have threads. This little trick saved me a LOT of hassle getting them re-inserted and they still threaded in perfectly fine. Line up the remaining 4 bolts, snug them up and take the jacks out, re-install battery and such. SO, I have NOT done the 4th mount yet, under the rear of the engine. Supposed to be the worst. In test drives, between this fix, a front brake job, and sway bar links/bushings, the car is MUCH quieter going over small bumps and road cracks. If I finish and go on to install the 4th mount, I'll update this review.
5.0 out of 5 stars Perfect Fit and Great Performance!
This engine motor mount kit was exactly what I needed for my 2012 Chevy Traverse 3.6L. All the mounts fit perfectly and matched the OEM specs. After installation, the engine vibrations were noticeably reduced and everything felt much smoother during acceleration and idle. The parts seem well-built and durable—definitely a great value compared to dealership prices. If you’re doing a replacement on a GM 3.6L SUV, this kit gets the job done right!
5.0 out of 5 stars Mounts
Great product, fits perfectly thank you
4.0 out of 5 stars Good-ish Budget Option 2006 Mercury Milan V6
Torque mount and engine mount fit well. Transmission mount was not easy to install and didn’t really fit well. Seemed like they got beat up in shipping; probably could’ve used more packing. But it didn’t affect how they functioned. Eliminated my vibration and completely changed how the car feels! (We’ll see)
5.0 out of 5 stars Will buy again if need
Fit and works good
1.0 out of 5 stars Rear mount does not fit a 2013 Jeep Patriot
The rear mount which came with this kit is a completely different size than what is being replaced on my 2013 Jeep Patriot. The Bolo fitment said it would be a fit for my vehicle, but it is not. The others appear to be good to go though. I suppose I will have to order another rear mount now. I would return it but I've already installed the others before discovering this... Bummer.In the attached photo, the original mount is on the left and the replacement is on the right.
5.0 out of 5 stars Great fit
Fit my 2014 town and country perfectly. Thankfully I can work on my own vehicles so installing these wasn’t too difficult. Good quality and exactly what was needed.
Similar suggestions by Bolo
More from this brand
Similar items from “Engine Mounts”
Share with
Or share with link
https://www.bolo.ae/products/UO0PZG7W5KJ