Description:
Reviews:
5.0 out of 5 stars Great colors but wastes alot of PLA
(function() { P.when('cr-A', 'ready').execute(function(A) { if(typeof A.toggleExpanderAriaLabel === 'function') { A.toggleExpanderAriaLabel('review_text_read_more', 'Read more of this review', 'Read less of this review'); } }); })(); .review-text-read-more-expander:focus-visible { outline: 2px solid #2162a1; outline-offset: 2px; border-radius: 5px; } This unit works great but color printing is sadly very wasteful. Think about what you are going to print very carefully and try to use as few layers as possible and few colors... Probably calibrate your purge carefully to reduce 75% of your waste. The cutter on the Kobra 3 cuts high so all that filament has to be purged and a new color is fed in, the new filament has to purge the remnant color out of the nozzle so a tall project might have 1000 layers which means each color change needs a purge... 8 colors per layer times 1000 layers and you will waste spools of PLA in printer poop. I've filled bags and it's all over the floor as the Kobra 3 just flings poop off the side into the room. Etsy has a poop deflector you can print for a few bucks but it's design could be improved so the poop don't get stuck under the bed. The printer works great but if you need to print 8 colors, make sure to buy the adapter that feeds 8 colors to the head and try not to print your own as it will break in the middle of a project and you will be stuck... The 8 port adapter is $15 and injection molded where as PLA isn't made for the stress the 8 tubes will put on it. I broke 3 printed adapters before I edited the STL to make the walls thicker and reinforce the adapter body... The 8 port adapter wasn't available at the time I purchased this and they offered a free STL for the adapter on the Anycubic wiki page. Works in a pinch. I love the clean printing and how well the colors come out but hate the wasted PLA. Would buy again. I have 2 Ace pro units...why don't they sell a 8 color combo kit?? They would sell alot more of these!
5.0 out of 5 stars Some false advertisements, great for detailed prints
This is my second 3D printer (first was an Ender 3 Pro), and it runs much more reliably and prints with higher detail than the Ender 3 Pro did.However, few things worth noting about this printer, especially for beginners.1) Installation is *not* 1-2-3 steps easy as shown in their marketing video. You have to hold the printer almost completely upside-down to get screws into it, which sometimes trap cords underneath the frame bits, and after you've finished with the elbow grease assembly (screwing the frame together, screwing the LCD panel in, clamping the filament holder in), then you have to plug in virtually *all* the cords for this thing. For every step motor (4?), for the LCD screen, 3 for the hotend, connect the tubing, connect the larger black cord etc. Thankfully the cords are at least labelled with X, Y, ZR etc but the places they are meant to be plugged into are not labelled. Didn't count, but felt like there were at least 12 cords that needed to be plugged in to various places. Then after that, you have to channel your inner contortionist to cut all the zip ties that are buried on this printer without nicking any of the necessary cords or belts, in incredibly poorly visible spots like under the center of the bed. None of the tools provided could reach these zip ties, so I ended up folding myself in half with my cell phone flash light trying to carefully cut a zip tie with a pair of shears. This is not "beginner" level installation, and I would not recommend it for anyone who has even a minor disability or handicap.2) The machine is *not* silent. It is very quiet, don't get me wrong, but it does make noise when it prints (a humming sound along with the whirring of the fans usually but occasionally a sort of buzzing thud if the nozzle catches on the print). The fans an be turned off, but even with them at 0% the printer still makes noise. I would guess its a little louder than the level of a loud AC unit or refrigerator. Again, ignore the marketing lies, this printer will make noise.3) The filament feed is *not* direct to the hotend. This is important because that feature can reduce the amount of potential clogs for filament being fed into the printer. This printer (like most 3D printers) uses bowden tubing with a gear setup to feed filament into the hotend. I saw this in the specs on this Bolo listing page and it is blatantly false advertising.4) The scraper tool included with this printer is basically a putty knife. It is almost completely dull. I would not recommend it for actually scraping up prints, buy yourself a finer scraper made of metal and not plastic. Most of the time this tool is not necessary to get prints off the bed due to the textured surface that the Anycubic Vyper uses, but in the rare cases where you do need a little bit of extra oomph, don't waste your time with this scraper.5) This printer runs quite a bit slower than average. A print that might take 1h or the Ender 3 Pro could take 3-4 on this printer. I think its due to the finer details this printer can achieve while printing, but worth knowing. You can change your print rate in the settings on a per print basis, but because of the fixed rate of filament extrusion, I haven't messed with this too much. I was worried it might affect the quality of my prints. If you're looking for fast production efficiency, this probably isn't the right printer for you.Some pros of this printer for beginners include the auto levelling bed, the easy to remove prints bed, and the touch screen.This printer works well, and has some very nice features. Auto levelling bed, textured and flexible bed for easier print removal, SD card reader with included microSD and SD cards, data cable for direct hookup to raspberry pis or arduinos, touch screen, 'quiet' printing all come to mind. I haven't had the printer clog yet (been using it for a few days 24/7), and the prints come out with very fine details (lines much less visible than on other 3D Printers I've tried), and they are easier to remove from the bed as well (I have only had to 'scrape off' one print so far and it was with a filament that is notoriously tough). I also haven't had any leaks or issues with this printer thus far.The inclusion of 5 or 6 alan wrenches was a nice touch, personally I really appreciated the data cable as well. The microSD card came preloaded with some test files (and formatted) so that was nice as well. The pliers that came with this printer are pretty poor, so maybe pick up a better pair for yourself if you're buying this printer. The zip ties were also a nice touch for the bowden tubing.If you're looking for highly detailed prints and don't care how long they take to produce, this is a top notch printer. If you're a beginner or looking for high production output, this is probably not the right printer for you.
1.0 out of 5 stars Not out of the box ez printing as advertised (shocking, I know)
Should have heeded the more skeptical reviews. This thing worked for a bit, but now refuses to get an initial layer down. I have tried every setting, 5 different spools of filament, including PLA, MATTE, PLA+, and all refuse to get solid adhesion now. I slow the print down, customize it as much as I can, have it take its time, pre-heat and dry, nothing works.The software slicer it comes with is junk. If you have to stop a print, get ready to wait upwards of 15 minutes for this thing to decide its done and finally move the nozzle back to the rear so you can get at the bed. Starting up takes as long as well.It seemed initially they'd finally figured out how to make 3D easier for the masses and start offering out-of-the-box solutions, but, not a chance. This is a finicky hobby at best, the pros have real systems highly dialed in to what they want, and the amateurs quickly end up spending their afternoon convincing this hunk of junk to actually print something.Multi-color printing is a joke, too. It wastes an absolute insane amount of PLA swapping between colors, and the spool rollers constantly get stuck, resulting in the feeder to not be able to grab more filament and the print failing with an unrelated error as it doesnt ever assume the spool holder accessory up top could possibly not do its job. I printed guides to help the PLA not tangle and wheel cut-outs to go around spools to help them spin more freely, but it doesn't help.I'm outside the return window, so I'm donating this stupid thing to the library or a school to let people who want to tinker with things have fun with it. I wanted something I could make functional prints for stuff around the house and for my hobby, but if i get even 1 out of every 10 prints to succeed I'm being generous.Huge regret on this purchase. Caveat emptor.
Don’t use these guys !
(function() { P.when('cr-A', 'ready').execute(function(A) { if(typeof A.toggleExpanderAriaLabel === 'function') { A.toggleExpanderAriaLabel('review_text_read_more', 'Read more of this review', 'Read less of this review'); } }); })(); .review-text-read-more-expander:focus-visible { outline: 2px solid #2162a1; outline-offset: 2px; border-radius: 5px; } We bought from them, put the printer together and it didn’t work. We then packed it back and returned it for a refund and they say as it was opened they will refund 50 percent ! Absolute joke of a business ! Should not be allowed to operate on Bolo if they behave like this
Calidad precio
Calidad precio
Best value printer I've ever used!
This printer is beyond excellent! I've put nearly 4kg of filament through it since I bought it and it's been rock solid. The only problem I ran into was the extruder leaking, but that was a $20 part that I had the next day.Setup was a breeze and the autoleveling/bedhoming feature is brilliant! The print bed itself is springsteel and holds very well to PLA with just a quick isopropyl wipe.Print speeds are a bit exaggerated, you won't get the advertised speeds unless you get into the slicer and change a bunch of settings, but regardless of that, it's at minimum 4x faster than my other printer and infinitely easier to use - so much so that I haven't used the other printer since I bought this one.
Llega incompleto el pedido
No me llegaron completos los accesorios y no la puedo utilizar
Outstanding at sale price
At this price point this is an unreal printer.Had middling expectations when I saw the cost and bought it to see if I would bd interested in making things.This printer has a very reasonable learning curve, has a very user friendly interface and prints some very good quality pieces with impressive speed.You will run into problems while running off your first dozen prints, but I would honestly blame a lot of user error and poor slicing.Can understand if others have experienced issues, but can't state how happy I am with 40hrs of prints from delivery.
Visit the ANYCUBIC Store
Anycubic Kobra S1 3D Printer Only, Support Multi Color Printing Needs ACE Pro, Max 600mm/s High Speed High Precision Anycubic App One-Click Printing Ultra-Quiet Printing 250 * 250 * 250mm
AED2,82169
Quantity:
Order today to get by 7-14 business days
This item qualifies for free delivery
Imported From: United States
At BOLO, we work hard to ensure the products you receive are new, genuine, and sourced from reputable suppliers.
BOLO is not an authorized or official retailer for most brands, nor are we affiliated with manufacturers unless specifically stated on a product page. Instead, we source verified sellers, authorized distributors or directly from the manufacturer.
Each product undergoes thorough inspection and verification at our consolidation and fulfilment centers to ensure it meets our strict authenticity and quality standards before being shipped and delivered to you.
If you ever have concerns regarding the authenticity of a product purchased from us, please contact Bolo Support. We will review your inquiry promptly and, if necessary, provide documentation verifying authenticity or offer a suitable resolution.
Your trust is our top priority, and we are committed to maintaining transparency and integrity in every transaction.
All product information, images, descriptions, and reviews originate from the manufacturer or from trusted sellers overseas. BOLO is not affiliated with, endorsed by, or an authorized retailer for most brands listed on our website unless stated otherwise.
While we strive to display accurate information, variations in packaging, labeling, instructions, or formulation may occasionally occur due to regional differences or supplier updates. For detailed or manufacturer-specific information, please contact the brand directly or reach out to BOLO Support for assistance.
Unless otherwise stated, all prices displayed on the product page include applicable taxes and import duties.
BOLO operates in accordance with the laws and regulations of United Arab Emirates. Any items found to be restricted or prohibited for sale within the UAE will be cancelled prior to shipment. We take proactive measures to ensure that only products permitted for sale in United Arab Emirates are listed on our website.
All items are shipped by air, and any products classified as “Dangerous Goods (DG)” under IATA regulations will be removed from the order and cancelled.
All orders are processed manually, and we make every effort to process them promptly once confirmed. Products cancelled due to the above reasons will be permanently removed from listings across the website.
Similar suggestions by Bolo
More from this brand
Similar items from “3D Printers”
Share with
Or share with link
https://www.bolo.ae/products/UO0PPEQOU76
Visit the ANYCUBIC Store
Anycubic Kobra S1 3D Printer Only, Support Multi Color Printing Needs ACE Pro, Max 600mm/s High Speed High Precision Anycubic App One-Click Printing Ultra-Quiet Printing 250 * 250 * 250mm
AED2,82169
Quantity:
Order today to get by 7-14 business days
This item qualifies for free delivery
Imported From: United States
At BOLO, we work hard to ensure the products you receive are new, genuine, and sourced from reputable suppliers.
BOLO is not an authorized or official retailer for most brands, nor are we affiliated with manufacturers unless specifically stated on a product page. Instead, we source verified sellers, authorized distributors or directly from the manufacturer.
Each product undergoes thorough inspection and verification at our consolidation and fulfilment centers to ensure it meets our strict authenticity and quality standards before being shipped and delivered to you.
If you ever have concerns regarding the authenticity of a product purchased from us, please contact Bolo Support. We will review your inquiry promptly and, if necessary, provide documentation verifying authenticity or offer a suitable resolution.
Your trust is our top priority, and we are committed to maintaining transparency and integrity in every transaction.
All product information, images, descriptions, and reviews originate from the manufacturer or from trusted sellers overseas. BOLO is not affiliated with, endorsed by, or an authorized retailer for most brands listed on our website unless stated otherwise.
While we strive to display accurate information, variations in packaging, labeling, instructions, or formulation may occasionally occur due to regional differences or supplier updates. For detailed or manufacturer-specific information, please contact the brand directly or reach out to BOLO Support for assistance.
Unless otherwise stated, all prices displayed on the product page include applicable taxes and import duties.
BOLO operates in accordance with the laws and regulations of United Arab Emirates. Any items found to be restricted or prohibited for sale within the UAE will be cancelled prior to shipment. We take proactive measures to ensure that only products permitted for sale in United Arab Emirates are listed on our website.
All items are shipped by air, and any products classified as “Dangerous Goods (DG)” under IATA regulations will be removed from the order and cancelled.
All orders are processed manually, and we make every effort to process them promptly once confirmed. Products cancelled due to the above reasons will be permanently removed from listings across the website.
Description:
Reviews:
5.0 out of 5 stars Great colors but wastes alot of PLA
(function() { P.when('cr-A', 'ready').execute(function(A) { if(typeof A.toggleExpanderAriaLabel === 'function') { A.toggleExpanderAriaLabel('review_text_read_more', 'Read more of this review', 'Read less of this review'); } }); })(); .review-text-read-more-expander:focus-visible { outline: 2px solid #2162a1; outline-offset: 2px; border-radius: 5px; } This unit works great but color printing is sadly very wasteful. Think about what you are going to print very carefully and try to use as few layers as possible and few colors... Probably calibrate your purge carefully to reduce 75% of your waste. The cutter on the Kobra 3 cuts high so all that filament has to be purged and a new color is fed in, the new filament has to purge the remnant color out of the nozzle so a tall project might have 1000 layers which means each color change needs a purge... 8 colors per layer times 1000 layers and you will waste spools of PLA in printer poop. I've filled bags and it's all over the floor as the Kobra 3 just flings poop off the side into the room. Etsy has a poop deflector you can print for a few bucks but it's design could be improved so the poop don't get stuck under the bed. The printer works great but if you need to print 8 colors, make sure to buy the adapter that feeds 8 colors to the head and try not to print your own as it will break in the middle of a project and you will be stuck... The 8 port adapter is $15 and injection molded where as PLA isn't made for the stress the 8 tubes will put on it. I broke 3 printed adapters before I edited the STL to make the walls thicker and reinforce the adapter body... The 8 port adapter wasn't available at the time I purchased this and they offered a free STL for the adapter on the Anycubic wiki page. Works in a pinch. I love the clean printing and how well the colors come out but hate the wasted PLA. Would buy again. I have 2 Ace pro units...why don't they sell a 8 color combo kit?? They would sell alot more of these!
5.0 out of 5 stars Some false advertisements, great for detailed prints
This is my second 3D printer (first was an Ender 3 Pro), and it runs much more reliably and prints with higher detail than the Ender 3 Pro did.However, few things worth noting about this printer, especially for beginners.1) Installation is *not* 1-2-3 steps easy as shown in their marketing video. You have to hold the printer almost completely upside-down to get screws into it, which sometimes trap cords underneath the frame bits, and after you've finished with the elbow grease assembly (screwing the frame together, screwing the LCD panel in, clamping the filament holder in), then you have to plug in virtually *all* the cords for this thing. For every step motor (4?), for the LCD screen, 3 for the hotend, connect the tubing, connect the larger black cord etc. Thankfully the cords are at least labelled with X, Y, ZR etc but the places they are meant to be plugged into are not labelled. Didn't count, but felt like there were at least 12 cords that needed to be plugged in to various places. Then after that, you have to channel your inner contortionist to cut all the zip ties that are buried on this printer without nicking any of the necessary cords or belts, in incredibly poorly visible spots like under the center of the bed. None of the tools provided could reach these zip ties, so I ended up folding myself in half with my cell phone flash light trying to carefully cut a zip tie with a pair of shears. This is not "beginner" level installation, and I would not recommend it for anyone who has even a minor disability or handicap.2) The machine is *not* silent. It is very quiet, don't get me wrong, but it does make noise when it prints (a humming sound along with the whirring of the fans usually but occasionally a sort of buzzing thud if the nozzle catches on the print). The fans an be turned off, but even with them at 0% the printer still makes noise. I would guess its a little louder than the level of a loud AC unit or refrigerator. Again, ignore the marketing lies, this printer will make noise.3) The filament feed is *not* direct to the hotend. This is important because that feature can reduce the amount of potential clogs for filament being fed into the printer. This printer (like most 3D printers) uses bowden tubing with a gear setup to feed filament into the hotend. I saw this in the specs on this Bolo listing page and it is blatantly false advertising.4) The scraper tool included with this printer is basically a putty knife. It is almost completely dull. I would not recommend it for actually scraping up prints, buy yourself a finer scraper made of metal and not plastic. Most of the time this tool is not necessary to get prints off the bed due to the textured surface that the Anycubic Vyper uses, but in the rare cases where you do need a little bit of extra oomph, don't waste your time with this scraper.5) This printer runs quite a bit slower than average. A print that might take 1h or the Ender 3 Pro could take 3-4 on this printer. I think its due to the finer details this printer can achieve while printing, but worth knowing. You can change your print rate in the settings on a per print basis, but because of the fixed rate of filament extrusion, I haven't messed with this too much. I was worried it might affect the quality of my prints. If you're looking for fast production efficiency, this probably isn't the right printer for you.Some pros of this printer for beginners include the auto levelling bed, the easy to remove prints bed, and the touch screen.This printer works well, and has some very nice features. Auto levelling bed, textured and flexible bed for easier print removal, SD card reader with included microSD and SD cards, data cable for direct hookup to raspberry pis or arduinos, touch screen, 'quiet' printing all come to mind. I haven't had the printer clog yet (been using it for a few days 24/7), and the prints come out with very fine details (lines much less visible than on other 3D Printers I've tried), and they are easier to remove from the bed as well (I have only had to 'scrape off' one print so far and it was with a filament that is notoriously tough). I also haven't had any leaks or issues with this printer thus far.The inclusion of 5 or 6 alan wrenches was a nice touch, personally I really appreciated the data cable as well. The microSD card came preloaded with some test files (and formatted) so that was nice as well. The pliers that came with this printer are pretty poor, so maybe pick up a better pair for yourself if you're buying this printer. The zip ties were also a nice touch for the bowden tubing.If you're looking for highly detailed prints and don't care how long they take to produce, this is a top notch printer. If you're a beginner or looking for high production output, this is probably not the right printer for you.
1.0 out of 5 stars Not out of the box ez printing as advertised (shocking, I know)
Should have heeded the more skeptical reviews. This thing worked for a bit, but now refuses to get an initial layer down. I have tried every setting, 5 different spools of filament, including PLA, MATTE, PLA+, and all refuse to get solid adhesion now. I slow the print down, customize it as much as I can, have it take its time, pre-heat and dry, nothing works.The software slicer it comes with is junk. If you have to stop a print, get ready to wait upwards of 15 minutes for this thing to decide its done and finally move the nozzle back to the rear so you can get at the bed. Starting up takes as long as well.It seemed initially they'd finally figured out how to make 3D easier for the masses and start offering out-of-the-box solutions, but, not a chance. This is a finicky hobby at best, the pros have real systems highly dialed in to what they want, and the amateurs quickly end up spending their afternoon convincing this hunk of junk to actually print something.Multi-color printing is a joke, too. It wastes an absolute insane amount of PLA swapping between colors, and the spool rollers constantly get stuck, resulting in the feeder to not be able to grab more filament and the print failing with an unrelated error as it doesnt ever assume the spool holder accessory up top could possibly not do its job. I printed guides to help the PLA not tangle and wheel cut-outs to go around spools to help them spin more freely, but it doesn't help.I'm outside the return window, so I'm donating this stupid thing to the library or a school to let people who want to tinker with things have fun with it. I wanted something I could make functional prints for stuff around the house and for my hobby, but if i get even 1 out of every 10 prints to succeed I'm being generous.Huge regret on this purchase. Caveat emptor.
Don’t use these guys !
(function() { P.when('cr-A', 'ready').execute(function(A) { if(typeof A.toggleExpanderAriaLabel === 'function') { A.toggleExpanderAriaLabel('review_text_read_more', 'Read more of this review', 'Read less of this review'); } }); })(); .review-text-read-more-expander:focus-visible { outline: 2px solid #2162a1; outline-offset: 2px; border-radius: 5px; } We bought from them, put the printer together and it didn’t work. We then packed it back and returned it for a refund and they say as it was opened they will refund 50 percent ! Absolute joke of a business ! Should not be allowed to operate on Bolo if they behave like this
Calidad precio
Calidad precio
Best value printer I've ever used!
This printer is beyond excellent! I've put nearly 4kg of filament through it since I bought it and it's been rock solid. The only problem I ran into was the extruder leaking, but that was a $20 part that I had the next day.Setup was a breeze and the autoleveling/bedhoming feature is brilliant! The print bed itself is springsteel and holds very well to PLA with just a quick isopropyl wipe.Print speeds are a bit exaggerated, you won't get the advertised speeds unless you get into the slicer and change a bunch of settings, but regardless of that, it's at minimum 4x faster than my other printer and infinitely easier to use - so much so that I haven't used the other printer since I bought this one.
Llega incompleto el pedido
No me llegaron completos los accesorios y no la puedo utilizar
Outstanding at sale price
At this price point this is an unreal printer.Had middling expectations when I saw the cost and bought it to see if I would bd interested in making things.This printer has a very reasonable learning curve, has a very user friendly interface and prints some very good quality pieces with impressive speed.You will run into problems while running off your first dozen prints, but I would honestly blame a lot of user error and poor slicing.Can understand if others have experienced issues, but can't state how happy I am with 40hrs of prints from delivery.
Similar suggestions by Bolo
More from this brand
Similar items from “3D Printers”
Share with
Or share with link
https://www.bolo.ae/products/UO0PPEQOU76