Description:
Reviews:
5.0 out of 5 stars Keepers
Just did a gig Saturday night using 7 of these at once. 1 was on a Shure SM58 (vocal mic) and the others were on 5 sax condenser mics (48V) and last was on a clarinet condenser mic (48V). All worked well - but ran into on major issue: don't try to change transmit frequency on one pair with any other transmitters or receivers on at the same time. When I found that I had two pairs on the same frequency, everything was already set up and all devices were on. When I reset one of the two on the same frequency, several other receivers switched to that frequency as well. I had to turn all devices off and reset them one at a time - which took up precious setup time.Other than that, we had the devices on for over 3 hours and all transmitters reported only 20%b battery use and the receivers showed full charge. The mixer was ~ 30 ft from the closest transmitter and 50 ft from the farthest. Fidelity was good with no increase in hiss or hum.One thing that occurred to me at set up was that the mixer no longer needed to apply phantom voltage to the condenser mic channels since the transmitters on the other side of the wireless connections provided that. It may even have caused some odd low frequency feedback.I've ordered a multi-channel USB A charger since these devices come with cables but no USB brick.Update:Works with Condenser mics (supplies 48v phantom power). They've been tested for use over 4+ hours. I ordered 12 of these but 2 failed as DOA or after the first charge. One was just dead and would not power on. The other one worked for all modes but when set to 48v. When set to 48v, it just flipped back to mic. Would have worked for a normal mic or for line-in, but we needed these to work with condenser mics. The good news is 11 worked at the same time. My max usage range is ~ 50ft. I haven't needed them to cover any more distance. We've used the 10 that worked on two gigs w little problem.These didn't work with all condenser mics. Did not work with Electro-Voice PL37 small diaphragm condenser mics. They produced a low frequency hum in all cases. We opted to use cables for these mic. Worked fine in Line-in (Music) and standard dynamic mics (SM58/58).Do not try to set the channel on one pair with any other pairs turned on or receivers may change channels along with the new pair. I recommend tuning the channels one pair at a time and be sure the small charging LED apertures face each other and align. Tune the transmitter to the channel you want and then power on the receiver w aperture facing the transmitter's aperture. The receiver should boot and change channels before the receiver completes its Syncing step.Also - handle with care. They don't seem too robust.J
5.0 out of 5 stars These work great in every configuration I tried!
I wanted to go wireless because I run hybrid Zoom meetings and have setup in a new room every time and don’t want people tripping over cords. I used these with a Yeti Pro XLR Condenser Microphone in cardioid mode to limit feedback. Make sure you have the gain knob on the microphone turned up and the transmitter in the 48V phantom power setting or it won’t work. Plug the receiver either directly into a powered speaker or your mixer input. I also used the transmitter in the Music setting and plugged it into my Mackie ProFX10v3+ Control Room output and broadcast the mixer output to remote powered monitor speakers in the back of the room. People in the back of the room often complain about not being able to hear the head table. Of course they wear hearing aids too. I also like that these transmitters use UHF and do not use the WiFi frequency 2.4 GHz to limit interference in buildings. I have tested them out to a 50’ distance without issues. These work great in multiple configurations and have more features and work with both dynamic/condenser microphones. The setup is straightforward and are great value for the money. They charge quickly and have great battery life. They are a little large and may be a tight fit on your mixer inputs/outputs but they do provide XLR to 1/4 inch adapters and you can turn them sideways. I highly recommend this product it’s way better than much higher priced wireless setups with more capability.
5.0 out of 5 stars Great value
Works as designed
1.0 out of 5 stars DID NOT WORK FOR ME
product did not work properly, it had a sound (like ground sound) but I was not able to return it due to personal issues (I was out of town) and now I realized I had to return 2 days ago
3.0 out of 5 stars Decent build quality. Not the greatest sound.
The build quality is not too bad for the price. They look great. They are too wide to be side by side in your mixer. The biggest problem is the sound quality. I connected them from my mixer to my main speaker. Upon initial testing, the DB output is louder than using a wire. That was surprising. However, My voice sounded a little harsh and distorted. Nothing unbearable. I probably could eq that out but it was noticeable. I bought these to be used on my powered monitors for my pa system. I wouldn't need to pull a wire from the mixer. Again, I can use them for this. I'll just play with the eq to get them to sound better. Overall, I think they are okay if you need to make your device wireless in a pinch. But I wouldn't turn to these for my main set up all the time. If you aren't an audio head like me, you may not even notice it. For that reason, they get an average rating from me.
5.0 out of 5 stars It works!
This really works!
5.0 out of 5 stars Nice Battery and quality of sound
I use this with Yamaha MG12XU No white noise while silence. Long lasting battery I was recording for 3 hours and the battery level kept full.I recommend this transmitters and receiver
5.0 out of 5 stars Battery lasts long, sound quality great.. inexpensive compared to other wireless setups
Great little set, has a party for our daughter in the backyard. Yard has speakers set up already but wanted a little more without having to run wiring. Bought this and setup my Boss L1B2 in the corner of the yard and sounded amazing!!!!! No lag in audio, no drop out, no interference.. battery later the whole party too!! Perfect if you have powered speakers and don't want to deal with running cables.
Buen producto
En mi caso lo he estado trabajando por más de un mes. Lo considero bueno. Con buena duración de batería.
Buzz requires change at the board
There was a terrible buzz on the control board when I first installed these on a couple of condenser mics we use on our stage. I sent a message to the seller through Bolo and they responded within a few hours. After about three back and forth conversations we finally figured out that you have to turn the Phantom voltage on your control board off because you're not actually connected to the mics. The receiver gets an overload with the control board voltage on. I turned it off and they worked like a charm. I suggested that this information should be in the instructions but otherwise it was really good customer support!
Très bonne qualité!
Wow! Je suis surpris de la qualité sonore et la facilité d’utilisation. Je recommande fortement!
Excelente transmisor sin interrupción ni retraso en el audio
Solo tengo un detalle con las instrucciones pues no dice que cargador debes usar solo dice 5V pero no cuantos amperios, si 1 o 2.1 que son los más comunes aquí en México, también no dice si debes descargarlos por completo para volver a cargarlos o si los puedes cargar aún con poca batería, se descargó primero el transmisor que va en el micrófono supongo por el phantom power, entonces no sé si debo cargar todos o solo el que se descargó o si puedo cargarlos aún teniendo batería, agradecería si responden pues al publicar mi pregunta no deja escribir tanto.
Muy tardado y mete ruido
El envío tardo demaciado tube que conseguir otra opción , no me ayudaron para adquirir un rembolso por la tardanza y una vez que llegaron los probé y meten un ruido terrible , imposible de usarTratare de regresar el producto y que me hagan valido el reembolso
Visit the YXG Store
YXG UHF Wireless XLR Transmitter and Receiver Plug-on Wireless Microphone System for Dynamic/Condenser Microphone,with 48V Phantom Power, Electric Guitar/Bass, and More,Audio Mixer, PA System
AED48195
Quantity:
Order today to get by 7-14 business days
This item qualifies for free delivery
Imported From: United States
At BOLO, we work hard to ensure the products you receive are new, genuine, and sourced from reputable suppliers.
BOLO is not an authorized or official retailer for most brands, nor are we affiliated with manufacturers unless specifically stated on a product page. Instead, we source verified sellers, authorized distributors or directly from the manufacturer.
Each product undergoes thorough inspection and verification at our consolidation and fulfilment centers to ensure it meets our strict authenticity and quality standards before being shipped and delivered to you.
If you ever have concerns regarding the authenticity of a product purchased from us, please contact Bolo Support. We will review your inquiry promptly and, if necessary, provide documentation verifying authenticity or offer a suitable resolution.
Your trust is our top priority, and we are committed to maintaining transparency and integrity in every transaction.
All product information, images, descriptions, and reviews originate from the manufacturer or from trusted sellers overseas. BOLO is not affiliated with, endorsed by, or an authorized retailer for most brands listed on our website unless stated otherwise.
While we strive to display accurate information, variations in packaging, labeling, instructions, or formulation may occasionally occur due to regional differences or supplier updates. For detailed or manufacturer-specific information, please contact the brand directly or reach out to BOLO Support for assistance.
Unless otherwise stated, all prices displayed on the product page include applicable taxes and import duties.
BOLO operates in accordance with the laws and regulations of United Arab Emirates. Any items found to be restricted or prohibited for sale within the UAE will be cancelled prior to shipment. We take proactive measures to ensure that only products permitted for sale in United Arab Emirates are listed on our website.
All items are shipped by air, and any products classified as “Dangerous Goods (DG)” under IATA regulations will be removed from the order and cancelled.
All orders are processed manually, and we make every effort to process them promptly once confirmed. Products cancelled due to the above reasons will be permanently removed from listings across the website.
Similar suggestions by Bolo
More from this brand
Similar items from “Instrument Wireless Microphones”
Share with
Or share with link
https://www.bolo.ae/products/UO0PMKQGQ8J
Visit the YXG Store
YXG UHF Wireless XLR Transmitter and Receiver Plug-on Wireless Microphone System for Dynamic/Condenser Microphone,with 48V Phantom Power, Electric Guitar/Bass, and More,Audio Mixer, PA System
AED48195
Quantity:
Order today to get by 7-14 business days
This item qualifies for free delivery
Imported From: United States
At BOLO, we work hard to ensure the products you receive are new, genuine, and sourced from reputable suppliers.
BOLO is not an authorized or official retailer for most brands, nor are we affiliated with manufacturers unless specifically stated on a product page. Instead, we source verified sellers, authorized distributors or directly from the manufacturer.
Each product undergoes thorough inspection and verification at our consolidation and fulfilment centers to ensure it meets our strict authenticity and quality standards before being shipped and delivered to you.
If you ever have concerns regarding the authenticity of a product purchased from us, please contact Bolo Support. We will review your inquiry promptly and, if necessary, provide documentation verifying authenticity or offer a suitable resolution.
Your trust is our top priority, and we are committed to maintaining transparency and integrity in every transaction.
All product information, images, descriptions, and reviews originate from the manufacturer or from trusted sellers overseas. BOLO is not affiliated with, endorsed by, or an authorized retailer for most brands listed on our website unless stated otherwise.
While we strive to display accurate information, variations in packaging, labeling, instructions, or formulation may occasionally occur due to regional differences or supplier updates. For detailed or manufacturer-specific information, please contact the brand directly or reach out to BOLO Support for assistance.
Unless otherwise stated, all prices displayed on the product page include applicable taxes and import duties.
BOLO operates in accordance with the laws and regulations of United Arab Emirates. Any items found to be restricted or prohibited for sale within the UAE will be cancelled prior to shipment. We take proactive measures to ensure that only products permitted for sale in United Arab Emirates are listed on our website.
All items are shipped by air, and any products classified as “Dangerous Goods (DG)” under IATA regulations will be removed from the order and cancelled.
All orders are processed manually, and we make every effort to process them promptly once confirmed. Products cancelled due to the above reasons will be permanently removed from listings across the website.
Description:
Reviews:
5.0 out of 5 stars Keepers
Just did a gig Saturday night using 7 of these at once. 1 was on a Shure SM58 (vocal mic) and the others were on 5 sax condenser mics (48V) and last was on a clarinet condenser mic (48V). All worked well - but ran into on major issue: don't try to change transmit frequency on one pair with any other transmitters or receivers on at the same time. When I found that I had two pairs on the same frequency, everything was already set up and all devices were on. When I reset one of the two on the same frequency, several other receivers switched to that frequency as well. I had to turn all devices off and reset them one at a time - which took up precious setup time.Other than that, we had the devices on for over 3 hours and all transmitters reported only 20%b battery use and the receivers showed full charge. The mixer was ~ 30 ft from the closest transmitter and 50 ft from the farthest. Fidelity was good with no increase in hiss or hum.One thing that occurred to me at set up was that the mixer no longer needed to apply phantom voltage to the condenser mic channels since the transmitters on the other side of the wireless connections provided that. It may even have caused some odd low frequency feedback.I've ordered a multi-channel USB A charger since these devices come with cables but no USB brick.Update:Works with Condenser mics (supplies 48v phantom power). They've been tested for use over 4+ hours. I ordered 12 of these but 2 failed as DOA or after the first charge. One was just dead and would not power on. The other one worked for all modes but when set to 48v. When set to 48v, it just flipped back to mic. Would have worked for a normal mic or for line-in, but we needed these to work with condenser mics. The good news is 11 worked at the same time. My max usage range is ~ 50ft. I haven't needed them to cover any more distance. We've used the 10 that worked on two gigs w little problem.These didn't work with all condenser mics. Did not work with Electro-Voice PL37 small diaphragm condenser mics. They produced a low frequency hum in all cases. We opted to use cables for these mic. Worked fine in Line-in (Music) and standard dynamic mics (SM58/58).Do not try to set the channel on one pair with any other pairs turned on or receivers may change channels along with the new pair. I recommend tuning the channels one pair at a time and be sure the small charging LED apertures face each other and align. Tune the transmitter to the channel you want and then power on the receiver w aperture facing the transmitter's aperture. The receiver should boot and change channels before the receiver completes its Syncing step.Also - handle with care. They don't seem too robust.J
5.0 out of 5 stars These work great in every configuration I tried!
I wanted to go wireless because I run hybrid Zoom meetings and have setup in a new room every time and don’t want people tripping over cords. I used these with a Yeti Pro XLR Condenser Microphone in cardioid mode to limit feedback. Make sure you have the gain knob on the microphone turned up and the transmitter in the 48V phantom power setting or it won’t work. Plug the receiver either directly into a powered speaker or your mixer input. I also used the transmitter in the Music setting and plugged it into my Mackie ProFX10v3+ Control Room output and broadcast the mixer output to remote powered monitor speakers in the back of the room. People in the back of the room often complain about not being able to hear the head table. Of course they wear hearing aids too. I also like that these transmitters use UHF and do not use the WiFi frequency 2.4 GHz to limit interference in buildings. I have tested them out to a 50’ distance without issues. These work great in multiple configurations and have more features and work with both dynamic/condenser microphones. The setup is straightforward and are great value for the money. They charge quickly and have great battery life. They are a little large and may be a tight fit on your mixer inputs/outputs but they do provide XLR to 1/4 inch adapters and you can turn them sideways. I highly recommend this product it’s way better than much higher priced wireless setups with more capability.
5.0 out of 5 stars Great value
Works as designed
1.0 out of 5 stars DID NOT WORK FOR ME
product did not work properly, it had a sound (like ground sound) but I was not able to return it due to personal issues (I was out of town) and now I realized I had to return 2 days ago
3.0 out of 5 stars Decent build quality. Not the greatest sound.
The build quality is not too bad for the price. They look great. They are too wide to be side by side in your mixer. The biggest problem is the sound quality. I connected them from my mixer to my main speaker. Upon initial testing, the DB output is louder than using a wire. That was surprising. However, My voice sounded a little harsh and distorted. Nothing unbearable. I probably could eq that out but it was noticeable. I bought these to be used on my powered monitors for my pa system. I wouldn't need to pull a wire from the mixer. Again, I can use them for this. I'll just play with the eq to get them to sound better. Overall, I think they are okay if you need to make your device wireless in a pinch. But I wouldn't turn to these for my main set up all the time. If you aren't an audio head like me, you may not even notice it. For that reason, they get an average rating from me.
5.0 out of 5 stars It works!
This really works!
5.0 out of 5 stars Nice Battery and quality of sound
I use this with Yamaha MG12XU No white noise while silence. Long lasting battery I was recording for 3 hours and the battery level kept full.I recommend this transmitters and receiver
5.0 out of 5 stars Battery lasts long, sound quality great.. inexpensive compared to other wireless setups
Great little set, has a party for our daughter in the backyard. Yard has speakers set up already but wanted a little more without having to run wiring. Bought this and setup my Boss L1B2 in the corner of the yard and sounded amazing!!!!! No lag in audio, no drop out, no interference.. battery later the whole party too!! Perfect if you have powered speakers and don't want to deal with running cables.
Buen producto
En mi caso lo he estado trabajando por más de un mes. Lo considero bueno. Con buena duración de batería.
Buzz requires change at the board
There was a terrible buzz on the control board when I first installed these on a couple of condenser mics we use on our stage. I sent a message to the seller through Bolo and they responded within a few hours. After about three back and forth conversations we finally figured out that you have to turn the Phantom voltage on your control board off because you're not actually connected to the mics. The receiver gets an overload with the control board voltage on. I turned it off and they worked like a charm. I suggested that this information should be in the instructions but otherwise it was really good customer support!
Très bonne qualité!
Wow! Je suis surpris de la qualité sonore et la facilité d’utilisation. Je recommande fortement!
Excelente transmisor sin interrupción ni retraso en el audio
Solo tengo un detalle con las instrucciones pues no dice que cargador debes usar solo dice 5V pero no cuantos amperios, si 1 o 2.1 que son los más comunes aquí en México, también no dice si debes descargarlos por completo para volver a cargarlos o si los puedes cargar aún con poca batería, se descargó primero el transmisor que va en el micrófono supongo por el phantom power, entonces no sé si debo cargar todos o solo el que se descargó o si puedo cargarlos aún teniendo batería, agradecería si responden pues al publicar mi pregunta no deja escribir tanto.
Muy tardado y mete ruido
El envío tardo demaciado tube que conseguir otra opción , no me ayudaron para adquirir un rembolso por la tardanza y una vez que llegaron los probé y meten un ruido terrible , imposible de usarTratare de regresar el producto y que me hagan valido el reembolso
Similar suggestions by Bolo
More from this brand
Similar items from “Instrument Wireless Microphones”
Share with
Or share with link
https://www.bolo.ae/products/UO0PMKQGQ8J