5.0 out of 5 stars Space and utility GAME CHANGER

T.B. · May 11, 2025

(function() { P.when('cr-A', 'ready').execute(function(A) { if(typeof A.toggleExpanderAriaLabel === 'function') { A.toggleExpanderAriaLabel('review_text_read_more', 'Read more of this review', 'Read less of this review'); } }); })(); .review-text-read-more-expander:focus-visible { outline: 2px solid #2162a1; outline-offset: 2px; border-radius: 5px; } This is a game changer. My wife just bought a 2023 Hyundai Santa Fe Sel and lives it. However, although it has 2 cup holders in the console, one is deep inside the slide cover and tyer are no rear cup holders or anywhere to put anything like a sandwich, keys or anything nearby. Sharing the 2 cup holders in the console is not very accommodating either. With this we can now each have a standard cup holder plus a large cop or bowl plus a tray for miscellaneous items and a cell phone holder. Success! Yes it is a bit invasive because of how tall it is but most importantly it does what is needed. It is also infinitely adjustable and tightens very securely .I/we love it, no need for an ancillary phone holder. We highly recommend this to increase utility where needed.

4.0 out of 5 stars Heavy XL phones beware, other phones go for it!

K.P. · March 6, 2025

Well, I am so super disappointed. This thing is very flimsy and not tight in some crucial areas. I have a huge iPhone Max with an Otter Box that I never take off and never will since I drop the thing constantly and it’s been soaking wet and banged up so much the Otter Box is hanging off the top yet it STILL saved my phone from getting wet somehow by miracles! The Otter that I can’t use many phone holders to start with. This fits my phone and holds it, but not tight or quite well enough. It’s just shy of tightening enough on the sides. I have to really work at it.That’s not my issue. My issue is that the contraption that goes into the cup holder is all sorts of rigged up with wobbly pieces that fall off and an unreachable tightener.Additionally, the parts are ridiculously wonky, too tall due to the enormous starting cup holder that doesn’t even work great anyway, the cell phone connection to the monstrosity they is this contraption doesn’t stay firm. It bounces up at that top level because it’s sooooo far away from the base and my phone is so heavy.I rigged it up to try it for the first time today and I just can’t like it. I have to have my phone in the floor in the passenger seat in a store bought floor cup holder for 6 cups that I have weighted down with full drinks to offset the cell phone holder. Still wonky even in that cup holder too. (I thought it was my Jag cup holder because it has factory-installed adjustable cup holders already. It’s not. Even in the other cup holder that gets a tight seal at the cup holder level, every level above it is about 4 inches away from the level below it, so by the time you get up to the tray level then up to the cell phone level, it’s moving around bobbing like it’s dancing with the music.I bought this because I don’t want to have to worry about my phone or save it from flying around the car untethered with no spot made for it to sit without being seen or heard until I need it did something.In the end, after trying to accept the limitations of this, I gave up and just went back to the silicone water bottle bottom I have been using since I got this vehicle a year ago that doesn’t allow it to be plugged in, which this thing does, but at too dangerous a cost.I even tried taking the whole thing apart and only having the cell phone holder since that is most importantly why I bought this. That didn’t work either. It’s not putting phone in a good spot and it bobs around and swivels around depending on which way I tried to use it - never being still.I thought about trying a cup holder inside my cupholder to put this cupholder in, then not using any of the attachments except the cell phone holder, but then why did I spend the money on this contraption?!I haven’t decided if I’m going to return it yet. Tomorrow I’m going to try again to see what I can do to maybe modify it, glue it still, add something to make it stronger, I don’t know.I also just ordered the beanbag kind of cell phone holder to replace the silicone circle since the beanbag and plastic cell phone holder was my second choice.I’m thinking this one is too much trouble but I love all the attachments and it’s such a great idea that’s maybe just a little bit ahead of its time. If thee poles were made out of metal instead of plastic, and if the cup holder base was built better, I’m sure it would be perfect.I guess I’ll probably have to return it. Writing this out seems to be clarifying for me that this is just not made well for my somewhat unique needs.It looks exactly as pictured with all black plastic parts. It comes with a very large base cupholder that has a skinny base under that cupholder and it has 2 twisty parts down under the cupholder. The bottom one is intended to move the extenders in and out with extenders on them that don’t all stay on even inside the cupholder. That tightener is the one that is unreachable to tighten it. I had to take it all apart several times because the things would not cooperate or stay or tighten so I kept trying patiently. After the third time, I accepted that it wouldn’t get any better than that and I proceeded to drive. (That’s when the cell phone dancing happened.)It also came with 2 more smaller, cup holders that would call more cup swings than traditional style cup holders. I didn’t use them, but they were installed since they could a good option to have for something, maybe hair clips. The tray is great, but again wobbly because my phone is so heavy, so I kept getting worried that the stuff in the tray would fall out and I stopped using the tray before I stopped using the cell holder.At the top of the contraption, which is I’d guess approximately 18-24 inches tall from the bottom of the base that inserts into a cupholder to the top of the cell phone holder.The plastic doesn’t seem cheap or flimsy, in case you’re wondering about that. I was woman handling the tightener parts and it didn’t flinch. It’s just the pole parts that I think need to be metal to hold heavier phones and maybe heavier stuff in the tray because they tray is good but the wobble messes up its functionality.This should be a thoroughly clear and well-explained review to help people make a decision on whether this will work for them or not. I struggled with the reviews and photos myself because of some things I had questions on that I touched on above.

5.0 out of 5 stars One of my favorite car products!

A. · April 16, 2025

I absolutely love this product! I will say it is a little more flimsy than I expected, but it works great and is a huge asset for someone like me that is in my car most of the time for work. Each piece can be attached or detached based on the owners preference. You don’t have to have the whole thing put together, but I prefer it that way. It holds a decent amount of weight. The silver cup holder that swings out definitely doesn’t hold all sizes of drink cups. It’s more of a small drink cup or coffee cup holder. There isn’t really any helpful directions to help put it together, but I put mine together in about 5-10 minutes without any directions so it’s not very complicated. If you travel often or drive frequently for work, I absolutely would recommend this product!

3.0 out of 5 stars Only practical if you don’t have passengers.

M. · December 28, 2024

This was for my husband who had to commute an hour now. It is spacious and works well. It is a bit of a pain to take it in and out when someone else is in the car though. And it is definitely too big to leave in place with a passenger. He said it was a bit more complicated than it should have been to put it together but generally works well. It looks a bit complicated too, like where do you put what.

5.0 out of 5 stars Smart Design!

S. · October 30, 2024

I’m really impressed with the ITPY 5-in-1 Car Cup Holder. Made from thick plastic, it feels solid and durable. Setup was a breeze thanks to the easy-to-understand photo instructions.The base is a standout feature—unlike my old holder with flimsy foam pads, this one has a screw-tight base with rubber-covered extender arms that fit nearly any cup compartment. It starts at about 2 ¼ inches in diameter and twists to expand to about 3 5/16 inches. For those massive tractor truck cup compartments, it comes with rubber pads that snap onto the arms to fit cup holders up to 3 7/8 inches in diameter.The phone holder is a lifesaver! Now, I can easily view the GPS without touching my phone while driving. It features a 360° rotating ball joint for the perfect angle, and you just tighten the wing nut to keep it secure. It fits phones from 2 ¼ to 3 ¾ inches wide and has soft rubber grommets to prevent scratches—perfect for my Samsung S24 Ultra! Plus, the tray is super sturdy; it easily holds a burger and fries or a notepad and pen.The main cup holder design is ingenious! There’s a side slot for your coffee mug handle if you prefer a real coffee cup, and the diameter is “self-adjusting.” My previous cup holders required twisting to fit different sizes, which was awkward when holding a beverage, but this one has a sturdy spring-loaded lever that adjusts to any cup from 2 ¼ inches to nearly 3 ¾ inches. You can simply set your favorite coffee cup or a Big Gulp inside, and the lever holds it securely.This 5-in-1 cup holder also includes an extra metal ring cup holder that stores neatly and pulls out when needed. I use it to hold my water bottle for later. Overall, I’m giving it 5 stars for its quality, solid build, and smart design!