Description:
Reviews:
5.0 out of 5 stars Clear housing, clean fuel—perfect for high-flow setups
The media could not be loaded. I bought this fuel-water separator to help clean out a gas tank on my boat, and it delivered exactly what I needed. I was running a 12V transfer pump rated at 120 gallons per hour, so I needed a filter that could handle higher flow than standard marine filters—and this one did just that.Most options I found had much smaller fittings and would’ve choked the system. This unit has 1” NPT top ports, which I reduced down to 5/8” ID hose to maintain flow without restriction. It filtered the fuel continuously for hours without a problem.The clear bowl on the bottom is a huge bonus. I could visibly see the water it trapped, and when it was time to drain it, the bottom valve let me release it in a slow, controlled drip—no mess, no rush. I was able to empty the water without wasting fuel. Tightened it back up, and the system kept running.Between the water separation and the debris it caught, this thing made a noticeable difference in fuel clarity. It kept up with the high GPH without backing up and didn’t miss any debris or water. Definitely impressed.Also worth noting: after I used it, a buddy of mine with a boat asked if he could borrow it after hearing how well it worked. Says a lot.For the price, I honestly didn’t expect this level of performance. If you’re running a high-flow fuel cleaning system or recirculating setup like I was, this is the filter to get.
5.0 out of 5 stars quick delivery
i did not expect this large a unit I should have read more carefully
5.0 out of 5 stars Will buy again
Works perfect . Priced right
5.0 out of 5 stars Filters very well.
I have this installed on an external diesel tank that I use for my business, and it does a really good job of removing the sediment and condensation from the fuel. I have purchased the replacement filters and have been using it problem free for several months now.
1.0 out of 5 stars Appears to be as advertised but total crap in use
Installed easily. The die cast top looks well made with clean well cut threads. Plastic bowl and threads perfect and unscrewed easily by hand contrary to many negative comments. Has an o ring seal. The brass screw drain works smoothly again contrary to some reviews. The included wrench seems to be plastic and very flimsy. Doubt it will survive changing a stuck filter. Will rate 4 stars now and update later if it passes leak checks after a reasonable time. LATER: Brass drain valve developed drip leak than increased to a stream after pumping less than 12 gallons. Terrible mess and dangerous. Do not buy this product.
4.0 out of 5 stars Filtered water, but nothing settled?
I have an external fuel oil tank that is many years old and was giving my furnace some trouble with water and sediment. I McGyvered a pump, pre-filter and used this filter as a second stage to take in the bad and output the good back into the tank. I was fully expecting to see water at the bottom of the plastic cup so I could drain it off. To my surprise, I never saw a collection of water. Maybe the pump was too fast. IDK. However, when I retested the tank the water was mostly gone. So it worked, sort of, because of the filter itself, not from seeing the satisfaction of how much water was in my fuel tank. 4 stars for the fact my filter contraption did what I wanted. 5 stars if I could tell it actually separated the water and how much.
5.0 out of 5 stars Works good
Was purchased for home diesel tank work good at flowing out thing’s I don’t want in my fuel
3.0 out of 5 stars Nice product but petcock broke off.
Petcock handle spun and wouldn't tighten to close drain. Then it fell off. Bolo will replace it if I send back the entire assembly. However, it's all plumbed in and full of fuel oil and I need it NOW not later, as it is still winter. I placed a pipe plug in, but the canister threads are straight so it still leaks. I have a bucket under it now. All I need is a petcock.
Works perfectly.
Just one part of a system I made. Works perfectly
Bon produit
Bon filtre pour le diesel
Broken
The bleeder valve was stripped when I received it.
Muy buena paquete
Muchas gracias
Bien
Excelente producto
Visit the DICMIC Store
496 Fuel Tank Filter Assembly with Wrench Replacement for Gasoline and Diesel Water Separate 30 Micron Max 25 Gpm 150 Psi with 1” NPT Top Cap Replace# B10-AL
AED18821
Quantity:
Order today to get by 7-14 business days
Delivery fee of AED 20. Free for orders above AED 200.
Imported From: United States
At BOLO, we work hard to ensure the products you receive are new, genuine, and sourced from reputable suppliers.
BOLO is not an authorized or official retailer for most brands, nor are we affiliated with manufacturers unless specifically stated on a product page. Instead, we source verified sellers, authorized distributors or directly from the manufacturer.
Each product undergoes thorough inspection and verification at our consolidation and fulfilment centers to ensure it meets our strict authenticity and quality standards before being shipped and delivered to you.
If you ever have concerns regarding the authenticity of a product purchased from us, please contact Bolo Support. We will review your inquiry promptly and, if necessary, provide documentation verifying authenticity or offer a suitable resolution.
Your trust is our top priority, and we are committed to maintaining transparency and integrity in every transaction.
All product information, images, descriptions, and reviews originate from the manufacturer or from trusted sellers overseas. BOLO is not affiliated with, endorsed by, or an authorized retailer for most brands listed on our website unless stated otherwise.
While we strive to display accurate information, variations in packaging, labeling, instructions, or formulation may occasionally occur due to regional differences or supplier updates. For detailed or manufacturer-specific information, please contact the brand directly or reach out to BOLO Support for assistance.
Unless otherwise stated, all prices displayed on the product page include applicable taxes and import duties.
BOLO operates in accordance with the laws and regulations of United Arab Emirates. Any items found to be restricted or prohibited for sale within the UAE will be cancelled prior to shipment. We take proactive measures to ensure that only products permitted for sale in United Arab Emirates are listed on our website.
All items are shipped by air, and any products classified as “Dangerous Goods (DG)” under IATA regulations will be removed from the order and cancelled.
All orders are processed manually, and we make every effort to process them promptly once confirmed. Products cancelled due to the above reasons will be permanently removed from listings across the website.
Similar suggestions by Bolo
More from this brand
Similar items from “Fuel Filters”
Share with
Or share with link
https://www.bolo.ae/products/UO0O1UFD33S
Visit the DICMIC Store
496 Fuel Tank Filter Assembly with Wrench Replacement for Gasoline and Diesel Water Separate 30 Micron Max 25 Gpm 150 Psi with 1” NPT Top Cap Replace# B10-AL
AED18821
Quantity:
Order today to get by 7-14 business days
Delivery fee of AED 20. Free for orders above AED 200.
Imported From: United States
At BOLO, we work hard to ensure the products you receive are new, genuine, and sourced from reputable suppliers.
BOLO is not an authorized or official retailer for most brands, nor are we affiliated with manufacturers unless specifically stated on a product page. Instead, we source verified sellers, authorized distributors or directly from the manufacturer.
Each product undergoes thorough inspection and verification at our consolidation and fulfilment centers to ensure it meets our strict authenticity and quality standards before being shipped and delivered to you.
If you ever have concerns regarding the authenticity of a product purchased from us, please contact Bolo Support. We will review your inquiry promptly and, if necessary, provide documentation verifying authenticity or offer a suitable resolution.
Your trust is our top priority, and we are committed to maintaining transparency and integrity in every transaction.
All product information, images, descriptions, and reviews originate from the manufacturer or from trusted sellers overseas. BOLO is not affiliated with, endorsed by, or an authorized retailer for most brands listed on our website unless stated otherwise.
While we strive to display accurate information, variations in packaging, labeling, instructions, or formulation may occasionally occur due to regional differences or supplier updates. For detailed or manufacturer-specific information, please contact the brand directly or reach out to BOLO Support for assistance.
Unless otherwise stated, all prices displayed on the product page include applicable taxes and import duties.
BOLO operates in accordance with the laws and regulations of United Arab Emirates. Any items found to be restricted or prohibited for sale within the UAE will be cancelled prior to shipment. We take proactive measures to ensure that only products permitted for sale in United Arab Emirates are listed on our website.
All items are shipped by air, and any products classified as “Dangerous Goods (DG)” under IATA regulations will be removed from the order and cancelled.
All orders are processed manually, and we make every effort to process them promptly once confirmed. Products cancelled due to the above reasons will be permanently removed from listings across the website.
Description:
Reviews:
5.0 out of 5 stars Clear housing, clean fuel—perfect for high-flow setups
The media could not be loaded. I bought this fuel-water separator to help clean out a gas tank on my boat, and it delivered exactly what I needed. I was running a 12V transfer pump rated at 120 gallons per hour, so I needed a filter that could handle higher flow than standard marine filters—and this one did just that.Most options I found had much smaller fittings and would’ve choked the system. This unit has 1” NPT top ports, which I reduced down to 5/8” ID hose to maintain flow without restriction. It filtered the fuel continuously for hours without a problem.The clear bowl on the bottom is a huge bonus. I could visibly see the water it trapped, and when it was time to drain it, the bottom valve let me release it in a slow, controlled drip—no mess, no rush. I was able to empty the water without wasting fuel. Tightened it back up, and the system kept running.Between the water separation and the debris it caught, this thing made a noticeable difference in fuel clarity. It kept up with the high GPH without backing up and didn’t miss any debris or water. Definitely impressed.Also worth noting: after I used it, a buddy of mine with a boat asked if he could borrow it after hearing how well it worked. Says a lot.For the price, I honestly didn’t expect this level of performance. If you’re running a high-flow fuel cleaning system or recirculating setup like I was, this is the filter to get.
5.0 out of 5 stars quick delivery
i did not expect this large a unit I should have read more carefully
5.0 out of 5 stars Will buy again
Works perfect . Priced right
5.0 out of 5 stars Filters very well.
I have this installed on an external diesel tank that I use for my business, and it does a really good job of removing the sediment and condensation from the fuel. I have purchased the replacement filters and have been using it problem free for several months now.
1.0 out of 5 stars Appears to be as advertised but total crap in use
Installed easily. The die cast top looks well made with clean well cut threads. Plastic bowl and threads perfect and unscrewed easily by hand contrary to many negative comments. Has an o ring seal. The brass screw drain works smoothly again contrary to some reviews. The included wrench seems to be plastic and very flimsy. Doubt it will survive changing a stuck filter. Will rate 4 stars now and update later if it passes leak checks after a reasonable time. LATER: Brass drain valve developed drip leak than increased to a stream after pumping less than 12 gallons. Terrible mess and dangerous. Do not buy this product.
4.0 out of 5 stars Filtered water, but nothing settled?
I have an external fuel oil tank that is many years old and was giving my furnace some trouble with water and sediment. I McGyvered a pump, pre-filter and used this filter as a second stage to take in the bad and output the good back into the tank. I was fully expecting to see water at the bottom of the plastic cup so I could drain it off. To my surprise, I never saw a collection of water. Maybe the pump was too fast. IDK. However, when I retested the tank the water was mostly gone. So it worked, sort of, because of the filter itself, not from seeing the satisfaction of how much water was in my fuel tank. 4 stars for the fact my filter contraption did what I wanted. 5 stars if I could tell it actually separated the water and how much.
5.0 out of 5 stars Works good
Was purchased for home diesel tank work good at flowing out thing’s I don’t want in my fuel
3.0 out of 5 stars Nice product but petcock broke off.
Petcock handle spun and wouldn't tighten to close drain. Then it fell off. Bolo will replace it if I send back the entire assembly. However, it's all plumbed in and full of fuel oil and I need it NOW not later, as it is still winter. I placed a pipe plug in, but the canister threads are straight so it still leaks. I have a bucket under it now. All I need is a petcock.
Works perfectly.
Just one part of a system I made. Works perfectly
Bon produit
Bon filtre pour le diesel
Broken
The bleeder valve was stripped when I received it.
Muy buena paquete
Muchas gracias
Bien
Excelente producto
Similar suggestions by Bolo
More from this brand
Similar items from “Fuel Filters”
Share with
Or share with link
https://www.bolo.ae/products/UO0O1UFD33S