Description:
ABOUT US
MUKLEIalways takes "customer first" as its service tenet, providing customers with the best quality milling machine worktables and the most satisfactory service. If you have been looking for a trusted brand, YUUHJUN is your destination. Let our products create a better life for you!
THE REASONS FOR CHOOSING US:
The milling machine worktable works smoothly and precisely. The X-axis travel range is from 0 to 8 inches, and it is 0 to 2 inches for the Y-axis.
A package contains a piece of mill machine with a size of 12.2 x 3.5 x 3 inches. Please double check the size, so it fits your bench drill well.
The multifunction worktable can be used in garages, workshops, hardware stores, construction sites, etc.
Just a reminder: The screws on the base might be loose already, you can slightly tighten each lock nut on the screw to remove any looseness in the cross-slide.
PRODUCT DETAILS:
Material: aluminum alloy
Color: sliver, green
Worktable Size: 12.2 x 3.5 x 3 inches
YOU CAN GET:
1 x Milling Machine Worktable
Reviews:
5.0 out of 5 stars Completes the Drill Press
(function() { P.when('cr-A', 'ready').execute(function(A) { if(typeof A.toggleExpanderAriaLabel === 'function') { A.toggleExpanderAriaLabel('review_text_read_more', 'Read more of this review', 'Read less of this review'); } }); })(); .review-text-read-more-expander:focus-visible { outline: 2px solid #2162a1; outline-offset: 2px; border-radius: 5px; } Along with laser alignment the milling machine worktable completes a drill press. C-clamps were such a hassle, I didn't think I was going win by investing in a drill press. Now I can clamp the workpiece in at my leisure, switch on the laser light crosshairs, and accurately move the workpiece into position with the vernier dials of the milling machine worktable. All three should be sold as a bundle: drill press, milling machine worktable, and laser alignment accessory.
5.0 out of 5 stars Great for laser engraving
This is a cost effective solution for a two axis adjustable table for very light milling. I’m using this under my laser engraver at a fraction of the cost of the X-y tables marketed for that
4.0 out of 5 stars Easy fix
I give it a 4. Gotta admit it is sloppy out of the box. A Lot of backlash but thats an easy fix.. I have it on a little 8 inch desktop drill press. Its only for small stuff. say 3x9 inches with plenty of room for clamping. I wanted to mark all my holes then clamp it down once and dial them in to the drill bit. I make small custom RC and model Train hobby parts. I said the fix is easy but tedious. Worst part is u gotta take it all apart the first time. The screw coupler is real loose in the casting of the block. The treads in the coupler are also loose. My fix is the wrap the screws and the coupler up with a few layers of Teflon pipe tape. As the Teflon wears off, just pop the top covers and turn it over to wrap the screws as needed. This is not something I use every day so it last me a long time. My next project will be to cut the right size coupler with tighter threads lol.
3.0 out of 5 stars Smaller than pictured, .60" of backlash, very light
This thing is tiny, it's smaller than what pictured. Feels very light, the base looks small, not sure if it'll fit on my drill press. The adjustment know have a lot of backlash, about .60" of backlash. Not sure to keep it or return it. 🤔🤔🤔🤔
5.0 out of 5 stars Better than a drill press vise.
Better than a drill press vise. I had a drill press vise two access shiftable one. That cost about a hundred bucks. But it never held things well while drilling and would jam up with shavings. For $35 this table was great and I don't think as much room for improvement other than that offering a much bigger one would be nice. But I don't need much more than this. It has great clamp down ability. I wish I had M8 wing nuts though But this works for me just fine with a wrench and some extended couplers. I like that the drive screws have shielding to protect it from fouling
5.0 out of 5 stars One of my Perfect tool buys!
I had to produce small scale engine turning for my watch and scale model projects.This table was a key part of my very satisfying results. Not a 1 ton Bridgeport Mill that I used to create them previously but the results are equal! A table that provided exactly what I need!!!!!!!!
5.0 out of 5 stars That it has good quality for the price.
It works as it should.
4.0 out of 5 stars Nice in a pinch.
It’s being used on a drill press. Easy to take on and off for when more precise holes are needed. Accuracy is not precision, but close enough.
pour le prix la precision souaite
(function() { P.when('cr-A', 'ready').execute(function(A) { if(typeof A.toggleExpanderAriaLabel === 'function') { A.toggleExpanderAriaLabel('review_text_read_more', 'Read more of this review', 'Read less of this review'); } }); })(); .review-text-read-more-expander:focus-visible { outline: 2px solid #2162a1; outline-offset: 2px; border-radius: 5px; } tester en retard,....pour le prix la precision souaite , mercie
Seems decent
Seems to be pretty good quality for the price my only complaint is I can only get two bolts to hold it to the drill press stand not a big deal they're nice and tight but it would be better to have four in it.
Not great
Not worth the $$, it's not sturdy enough for my Ryobi benchtop drill press.
Cheaply Made
no precision here, cheaply made
Visit the MUKLEI Store
12.2 Inches Milling Machine Worktable, Multifunction Mill Working Table, X-Y Axis Milling Machine for Mini Drill and Drill Bracket
AED29554
Quantity:
Order today to get by 7-14 business days
This item qualifies for free delivery
Imported From: United States
At BOLO, we work hard to ensure the products you receive are new, genuine, and sourced from reputable suppliers.
BOLO is not an authorized or official retailer for most brands, nor are we affiliated with manufacturers unless specifically stated on a product page. Instead, we source verified sellers, authorized distributors or directly from the manufacturer.
Each product undergoes thorough inspection and verification at our consolidation and fulfilment centers to ensure it meets our strict authenticity and quality standards before being shipped and delivered to you.
If you ever have concerns regarding the authenticity of a product purchased from us, please contact Bolo Support. We will review your inquiry promptly and, if necessary, provide documentation verifying authenticity or offer a suitable resolution.
Your trust is our top priority, and we are committed to maintaining transparency and integrity in every transaction.
All product information, images, descriptions, and reviews originate from the manufacturer or from trusted sellers overseas. BOLO is not affiliated with, endorsed by, or an authorized retailer for most brands listed on our website unless stated otherwise.
While we strive to display accurate information, variations in packaging, labeling, instructions, or formulation may occasionally occur due to regional differences or supplier updates. For detailed or manufacturer-specific information, please contact the brand directly or reach out to BOLO Support for assistance.
Unless otherwise stated, all prices displayed on the product page include applicable taxes and import duties.
BOLO operates in accordance with the laws and regulations of United Arab Emirates. Any items found to be restricted or prohibited for sale within the UAE will be cancelled prior to shipment. We take proactive measures to ensure that only products permitted for sale in United Arab Emirates are listed on our website.
All items are shipped by air, and any products classified as “Dangerous Goods (DG)” under IATA regulations will be removed from the order and cancelled.
All orders are processed manually, and we make every effort to process them promptly once confirmed. Products cancelled due to the above reasons will be permanently removed from listings across the website.
Similar suggestions by Bolo
More from this brand
Similar items from “Milling Accessories”
Share with
Or share with link
https://www.bolo.ae/products/UO098Y1SC9D
Visit the MUKLEI Store
12.2 Inches Milling Machine Worktable, Multifunction Mill Working Table, X-Y Axis Milling Machine for Mini Drill and Drill Bracket
AED29554
Quantity:
Order today to get by 7-14 business days
This item qualifies for free delivery
Imported From: United States
At BOLO, we work hard to ensure the products you receive are new, genuine, and sourced from reputable suppliers.
BOLO is not an authorized or official retailer for most brands, nor are we affiliated with manufacturers unless specifically stated on a product page. Instead, we source verified sellers, authorized distributors or directly from the manufacturer.
Each product undergoes thorough inspection and verification at our consolidation and fulfilment centers to ensure it meets our strict authenticity and quality standards before being shipped and delivered to you.
If you ever have concerns regarding the authenticity of a product purchased from us, please contact Bolo Support. We will review your inquiry promptly and, if necessary, provide documentation verifying authenticity or offer a suitable resolution.
Your trust is our top priority, and we are committed to maintaining transparency and integrity in every transaction.
All product information, images, descriptions, and reviews originate from the manufacturer or from trusted sellers overseas. BOLO is not affiliated with, endorsed by, or an authorized retailer for most brands listed on our website unless stated otherwise.
While we strive to display accurate information, variations in packaging, labeling, instructions, or formulation may occasionally occur due to regional differences or supplier updates. For detailed or manufacturer-specific information, please contact the brand directly or reach out to BOLO Support for assistance.
Unless otherwise stated, all prices displayed on the product page include applicable taxes and import duties.
BOLO operates in accordance with the laws and regulations of United Arab Emirates. Any items found to be restricted or prohibited for sale within the UAE will be cancelled prior to shipment. We take proactive measures to ensure that only products permitted for sale in United Arab Emirates are listed on our website.
All items are shipped by air, and any products classified as “Dangerous Goods (DG)” under IATA regulations will be removed from the order and cancelled.
All orders are processed manually, and we make every effort to process them promptly once confirmed. Products cancelled due to the above reasons will be permanently removed from listings across the website.
Description:
ABOUT US
MUKLEIalways takes "customer first" as its service tenet, providing customers with the best quality milling machine worktables and the most satisfactory service. If you have been looking for a trusted brand, YUUHJUN is your destination. Let our products create a better life for you!
THE REASONS FOR CHOOSING US:
The milling machine worktable works smoothly and precisely. The X-axis travel range is from 0 to 8 inches, and it is 0 to 2 inches for the Y-axis.
A package contains a piece of mill machine with a size of 12.2 x 3.5 x 3 inches. Please double check the size, so it fits your bench drill well.
The multifunction worktable can be used in garages, workshops, hardware stores, construction sites, etc.
Just a reminder: The screws on the base might be loose already, you can slightly tighten each lock nut on the screw to remove any looseness in the cross-slide.
PRODUCT DETAILS:
Material: aluminum alloy
Color: sliver, green
Worktable Size: 12.2 x 3.5 x 3 inches
YOU CAN GET:
1 x Milling Machine Worktable
Reviews:
5.0 out of 5 stars Completes the Drill Press
(function() { P.when('cr-A', 'ready').execute(function(A) { if(typeof A.toggleExpanderAriaLabel === 'function') { A.toggleExpanderAriaLabel('review_text_read_more', 'Read more of this review', 'Read less of this review'); } }); })(); .review-text-read-more-expander:focus-visible { outline: 2px solid #2162a1; outline-offset: 2px; border-radius: 5px; } Along with laser alignment the milling machine worktable completes a drill press. C-clamps were such a hassle, I didn't think I was going win by investing in a drill press. Now I can clamp the workpiece in at my leisure, switch on the laser light crosshairs, and accurately move the workpiece into position with the vernier dials of the milling machine worktable. All three should be sold as a bundle: drill press, milling machine worktable, and laser alignment accessory.
5.0 out of 5 stars Great for laser engraving
This is a cost effective solution for a two axis adjustable table for very light milling. I’m using this under my laser engraver at a fraction of the cost of the X-y tables marketed for that
4.0 out of 5 stars Easy fix
I give it a 4. Gotta admit it is sloppy out of the box. A Lot of backlash but thats an easy fix.. I have it on a little 8 inch desktop drill press. Its only for small stuff. say 3x9 inches with plenty of room for clamping. I wanted to mark all my holes then clamp it down once and dial them in to the drill bit. I make small custom RC and model Train hobby parts. I said the fix is easy but tedious. Worst part is u gotta take it all apart the first time. The screw coupler is real loose in the casting of the block. The treads in the coupler are also loose. My fix is the wrap the screws and the coupler up with a few layers of Teflon pipe tape. As the Teflon wears off, just pop the top covers and turn it over to wrap the screws as needed. This is not something I use every day so it last me a long time. My next project will be to cut the right size coupler with tighter threads lol.
3.0 out of 5 stars Smaller than pictured, .60" of backlash, very light
This thing is tiny, it's smaller than what pictured. Feels very light, the base looks small, not sure if it'll fit on my drill press. The adjustment know have a lot of backlash, about .60" of backlash. Not sure to keep it or return it. 🤔🤔🤔🤔
5.0 out of 5 stars Better than a drill press vise.
Better than a drill press vise. I had a drill press vise two access shiftable one. That cost about a hundred bucks. But it never held things well while drilling and would jam up with shavings. For $35 this table was great and I don't think as much room for improvement other than that offering a much bigger one would be nice. But I don't need much more than this. It has great clamp down ability. I wish I had M8 wing nuts though But this works for me just fine with a wrench and some extended couplers. I like that the drive screws have shielding to protect it from fouling
5.0 out of 5 stars One of my Perfect tool buys!
I had to produce small scale engine turning for my watch and scale model projects.This table was a key part of my very satisfying results. Not a 1 ton Bridgeport Mill that I used to create them previously but the results are equal! A table that provided exactly what I need!!!!!!!!
5.0 out of 5 stars That it has good quality for the price.
It works as it should.
4.0 out of 5 stars Nice in a pinch.
It’s being used on a drill press. Easy to take on and off for when more precise holes are needed. Accuracy is not precision, but close enough.
pour le prix la precision souaite
(function() { P.when('cr-A', 'ready').execute(function(A) { if(typeof A.toggleExpanderAriaLabel === 'function') { A.toggleExpanderAriaLabel('review_text_read_more', 'Read more of this review', 'Read less of this review'); } }); })(); .review-text-read-more-expander:focus-visible { outline: 2px solid #2162a1; outline-offset: 2px; border-radius: 5px; } tester en retard,....pour le prix la precision souaite , mercie
Seems decent
Seems to be pretty good quality for the price my only complaint is I can only get two bolts to hold it to the drill press stand not a big deal they're nice and tight but it would be better to have four in it.
Not great
Not worth the $$, it's not sturdy enough for my Ryobi benchtop drill press.
Cheaply Made
no precision here, cheaply made
Similar suggestions by Bolo
More from this brand
Similar items from “Milling Accessories”
Share with
Or share with link
https://www.bolo.ae/products/UO098Y1SC9D