
Description:
About this item:
FLYSKY version FS i6 remote control, will come with all the parts welded and assembled and tested.
Package include:
1x F4 X1 Frame Kit
4x 2900KV Motors
1x F411 35A AIO BLHELI_ S Flight Controller
4x 4023 3-blade Props (4Pairs Red)
1x Caddx.us Ratel 2.1mm FPV Camera
1x 300mw OpenVTX
1x RP-SMA 60mm Antenna
1x Flysky Fli14+ Receiver
1x Flysky FS I6 Transmitter
1x IMAXRC B3 pro Charger
1x 750mAh 3S 11.1V 80C Lipo Battery
1x LST-009 FPV Goggles(Optional)
Flight control + ESC
Flight control parameters CPU: STM32F411CEU6 (100MHZ)
Six axes: MPU6000 (SPI connection)
Size: 32.5 * 32.5mm (25.5mm mounting hole)
Firmware version: Betaflight MATEKF411 (MK41)
OSD: Built-in BetaFlight OSD (OSD chip : AT7456E)
Receiver: Support Frsky XM / XM + receiver / Futaba receiver / Flysky receiver / TBS Crossfire receiver / DSMX receiver
Built-in current sensor
Weight: 6.3g
ESC parameters
Support BLheli / BLHELI_S
Support PWM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600
Input voltage: 2S-5S Lipo
Continuous current: 35A
Firmware: BLHELI_S
5.8G Image transmission
Project name: 5.8-G 40-ch 300mw OpenVTX image transmission Transmitting Power: 0/RCE/25mw/100mw/300mw
Power supply: DC 5V
Current (5v): Standard size: 14*15*3mm
Camera
Lens: 2.1mm
Horizontal resolution: 1200TVL
FOV: 180 degrees
Minimum delay: 8 ms
TV system: NTSC and PAL (can be changed)
Image: 16: 9 and 4: 3 (can be changed)
Language: ENG / FRANCE / RUS / SPA / PU / KOREA / China / Japan
Review:
2.4 out of 5
48.00% of customers are satisfied
1.0 out of 5 stars Don't waste your time
This deal looks cool but when I received it the transmitter won't and was not bound to drone. I have tried 3 different ways to get a hold of the company and I get 0 reply nothing. My issue should be easy to fix I just dont know how to get drone in bind mode. But contacting them is worthless. So dont expect any support if anything does not work or breaks .
5.0 out of 5 stars It’s started in full acro mode
I think that this is a good beginner would not recommend it to people under the age of 14 just because of how hard it is to learn! But other thank that it was easy to start and finish it was RTF out of the box. It was good in the race I tested it in and the unlocked box was good, and I also bought a new headset for the drone just because the headset it comes with is kind of junk. But it’s a good drone
1.0 out of 5 stars Insanely hard to control unless you have lots of experience
And the range for the goggles kinda sucks.
4.0 out of 5 stars Easy flyer but kind of off the mark on the radio for a first time
Got it earlier than expected which is a bonus came almost ready to fly only had to charge up the battery and fpv goggles and add on the props came already linked up to the radio unit. Just a heads up for first time flyers you will have a hard learning curve with the radio but look up the unit and learn how to set it in the right modes because it has you set it in full arco mode the first time you connect to the quad very easy to fly and crash it fast that way would recommend getting the 4S battery vs the 3S it comes with longer flight time that way but for a starter kit not bad at all
1.0 out of 5 stars Don't run right 1 motor don't run forward 2 don't run at all
Don't work
Visit the QWinOut Store
QWinOut F4 X1 175mm FPV Racing Drone 3-4S RTF with LST-009 FPV Goggles GHF411AIO Flight Controller OpenVTX FS I6 Transmitter (with Goggles)
AED299266
Quantity:
Order today to get by
Free delivery on orders over AED 200
Product origin: United States
Electrical items shipped from the US are by default considered to be 120v, unless stated otherwise in the product description. Contact Bolo support for voltage information of specific products. A step-up transformer is required to convert from 120v to 240v. All heating electrical items of 120v will be automatically cancelled.
More from this brand
Similar items from “Quadcopters & Multirotors”
Share with
Or share with link
https://www.bolo.ae/products/UO08QSIFXPO