Description:
Review:
5.0 out of 5 stars Can Also Be Used As A Roof Vent - READ IF YOU WANT TO KNOW HOW
(function() { P.when('cr-A', 'ready').execute(function(A) { if(typeof A.toggleExpanderAriaLabel === 'function') { A.toggleExpanderAriaLabel('review_text_read_more', 'Read more of this review', 'Read less of this review'); } }); })(); .review-text-read-more-expander:focus-visible { outline: 2px solid #2162a1; outline-offset: 2px; border-radius: 5px; } I could not reach my gable area of the home as it was too tight. My home has four (4) existing static air vents that are about 14 inches in diameter in the roof of the home so that air can naturally flow up from the vents in the eves and out the roof by simple physics of heat rising. But that really is not that optimal and never has been for any home. I have searched for any forced air electrical unit that could be installed below one of those static vents and force a lot more air out of the attic through the roof. There is nothing on the market. I am an engineer, so I just took the time to research enough gable vents to find the right one and this is it. What is important to know is that most gable vents have a high CFM (Cubic Ft Per Minute) of airflow of around 1600-2500. Forcing that much air into a static roof vent will cause a venturi effect due to the inability of the roof vent to accommodate that much air flow. This actually causes more noise. This is why I chose this unit. Much smaller, 820 CFM, easy to install and comes with a rheostat to control the speed of the fan in case the existing static roof vent cannot accept that much air flow. I found that the unit works just fine on full speed of 820 CFM and there is absolutely no noise at all. The unit is ultra quiet. If anyone plans to do the same thing I have done, just get the unit without the rheostat and only the thermostat and save the money. It will work without any noise if you have a decent size existing roof static vent. IMPORTANT INSTALL INSTRUCTIONS: In order for this to work, you will need to install two 2 X 4's between the roof joists 10.5" inches apart and centered over the hole that was cut for the existing roof static vent (photos included). Then two more 2 X 4's between the two I just mentioned, and once again, 10.5 inches apart and centered over the existing hole for the static roof vent. This creates a 10.5" inch square box. The 2 X 4's need to be mounted upright (not flat) so there is a 3.5" inch deep square to insert this new attic fan. YOU MUST REMOVE THE AUTOMATIC SHUTTER that comes with the fan. Very simple and only has 3 screws that hold it in place on each side of the fan. Now you have just a fan and a square metal box that holds the fan. Screw that metal box into the 10.5" inch wooden square you framed as mentioned above. Then plug the unit in using the 6ft long cord and you are done. If you do not have a plug nearby, you can use an extension cord. But the extension cord should be a 3 prong grounded plug since the cord that comes on the fan is a 3 prong plug. I have enclosed photos. Very easy to do and took me less than an hour start to finish, and I also ran wiring and installed an outlet to plug into. One of the photos is of the rheostat that comes with this unit. It has a 3 prongs on the rear to plug directly into an outlet and the cord from the fan plugs into the bottom of this rheostat. The manufacturer of this unit give you no information to know that or the length of the cord, among other things. This is why my review is so long. Now you should know everything so you can do this yourself. My plan is to add another one at the other end of the house since the home is quite large. Already making a difference in the amount of heat in my attic.
5.0 out of 5 stars Works great
I installed this in my palram canopia 6x10 Greenhouse. The greenhouse temp can get way over 100° in the summer but this exhaust fan helps bring temp and humidity down to where i can be inside for longer than a few minutes. It automatically turns on when temp goes above 80°. This was a great buy. I would definitely recommend.
5.0 out of 5 stars Works really well
Easy set up and works really well. I took the shutters off and vented it directly out of an existing roof vent. So far so good. I might get another one if this one dosen't move enough air.
4.0 out of 5 stars Yes it will work in a horizontal position. It is inexpensive not ‘ cheap’
Has UlL listing stickers, the ‘fan only’ unit I got had no cord, It seems pretty well crafted, but boy is that wiring compartment is darn small., getting the ground screw loosened in the bottom was a pain. I dunno what size screw it was neither any metric nor inch size nut driver I had would fit. But when fired up it, ran great , pretty powerful for a. 10inch fan. Yeah, I’d buy it again. My application needed to be installed in a horizontal position and the louvers popped right open. So it will work.Update April ‘22- got a second one to air out garage. Interestingly, the size of the wiring compartment has been enlarged., ground screw install was effortless. . Is someone reading my reviews & responding accordingly.? I appears so. Also the lovers have a blue plastic coating, apparently to seal better when closed. So I’m upping to 5 stars. As I said it’s powerful, quiet no vibration, well built. I like to buy USA made products which it is not, but the quality of this build could go up against anyone. It is nice to see a company take pride in the products and make something sturdy, as well as improve quality. Nice going iLiving!
5.0 out of 5 stars Flaps do not stop water for pouring in during rain with any small amount of wind.
Great fan function, flaps move well.I'd recommend this for a dry climate, water poured into our cargo container through these flaps when it rained. They are so light they won't stay closed with any wind from outside! Beautiful parts that cannot be used anywhere it rains.I liked the ease of installation and the length of the electric cord was suitable for mounting about 4 feet up from the floor, unless you called an electrician to put in a new outlet closer to the 8 ft. ceiling. Not bad for an added $200 expense.
5.0 out of 5 stars Strong exhaust for garage
Works great. Has run near constantly since purchase 2+ years ago.Be sure to occasionally clean and oil it
5.0 out of 5 stars Powerful!
Installed one in each of my metal roofed sheds to keep the heat down inside and man these things push air! Straightforward install and built extremely well. The thermostat feature is exactly what I wanted.
5.0 out of 5 stars Good product
excellent fan perfect for 1 storage
No apto para cocinas
(function() { P.when('cr-A', 'ready').execute(function(A) { if(typeof A.toggleExpanderAriaLabel === 'function') { A.toggleExpanderAriaLabel('review_text_read_more', 'Read more of this review', 'Read less of this review'); } }); })(); .review-text-read-more-expander:focus-visible { outline: 2px solid #2162a1; outline-offset: 2px; border-radius: 5px; } Poca resistencia a la grasa en el aire de una cocina. Requiere mantenimiento continuo y rápidamente pierde su velocidad máxima.
Wiring should be not for receptacle pnly
It was very good
Livraison rapide
Tel que la description
Still Working
I purchased 2 of these units to install in my Cottage. One mounted inside the cottage on the wall to extract air and the the other in the Cottage Attic where one of the exit vents was located. I am not at the cottage often and I want fresh air all the time, so, I crack the windows at one end of the building and the fan is mounted in the wall at the other and I have it set on a timer. I should have thought of this years ago. What a difference in air quality when I arrive at the cottage. So far, so good. The bearings are holding up and the fans still run like new.
Pas bruyant et facile de contrôle de vitesse
Pour transfert d’air chaud de l’atelier à la salle mecanique
Visit the iLiving Store
iLiving 10" Wall Mounted Shutter Exhaust Fan, Automatic Shutter, with Thermostat and Variable Speed controller, 65W, 820 CFM, 1200 SQF Coverage Area Silver (ILG8SF10V-ST)
AED57365
Quantity:
Order today to get by
Free delivery on orders over AED 200
Imported From: United States
At bolo.ae, we stand behind the authenticity and quality of every product we sell. We guarantee that all items offered on our website are 100% genuine, sourced directly from authorized distributors, trusted partners, or the original brands themselves.
We do not sell counterfeit, replica, or unauthorized goods. Each product undergoes thorough inspection and verification at our consolidation and fulfilment centers to ensure it meets our strict authenticity and quality standards before being shipped and delivered to you.
If you ever have concerns regarding the authenticity of a product purchased from us, please contact Bolo Support . We will review your inquiry promptly and, if necessary, provide documentation verifying authenticity or offer a suitable resolution.
Your trust is our top priority, and we are committed to maintaining transparency and integrity in every transaction.
All product information, including images, descriptions, and reviews, is provided by third-party vendors. bolo.ae is not responsible for any claims, promotions, or representations made within product content or images. For more accurate or detailed product information, please contact the manufacturer directly or reach out to Bolo Support.
Unless otherwise stated during checkout, all prices displayed on the product page include applicable taxes and import duties.
bolo.ae operates in accordance with the laws and regulations of United Arab Emirates. Any items found to be restricted or prohibited for sale within the UAE will be cancelled prior to shipment. We take proactive measures to ensure that only products permitted for sale in United Arab Emirates are listed on our website.
All items are shipped by air, and any products classified as “Dangerous Goods (DG)” under IATA regulations will be removed from the order and cancelled.
All orders are processed manually, and we make every effort to process them promptly once confirmed. Products cancelled due to the above reasons will be permanently removed from listings across the website.
Similar suggestions by Bolo
More from this brand
Similar items from “Ventilation Fans”
Share with
Or share with link
https://www.bolo.ae/products/UO08GTYIZS9
Visit the iLiving Store
iLiving 10" Wall Mounted Shutter Exhaust Fan, Automatic Shutter, with Thermostat and Variable Speed controller, 65W, 820 CFM, 1200 SQF Coverage Area Silver (ILG8SF10V-ST)
AED57365
Quantity:
Order today to get by
Free delivery on orders over AED 200
Imported From: United States
At bolo.ae, we stand behind the authenticity and quality of every product we sell. We guarantee that all items offered on our website are 100% genuine, sourced directly from authorized distributors, trusted partners, or the original brands themselves.
We do not sell counterfeit, replica, or unauthorized goods. Each product undergoes thorough inspection and verification at our consolidation and fulfilment centers to ensure it meets our strict authenticity and quality standards before being shipped and delivered to you.
If you ever have concerns regarding the authenticity of a product purchased from us, please contact Bolo Support . We will review your inquiry promptly and, if necessary, provide documentation verifying authenticity or offer a suitable resolution.
Your trust is our top priority, and we are committed to maintaining transparency and integrity in every transaction.
All product information, including images, descriptions, and reviews, is provided by third-party vendors. bolo.ae is not responsible for any claims, promotions, or representations made within product content or images. For more accurate or detailed product information, please contact the manufacturer directly or reach out to Bolo Support.
Unless otherwise stated during checkout, all prices displayed on the product page include applicable taxes and import duties.
bolo.ae operates in accordance with the laws and regulations of United Arab Emirates. Any items found to be restricted or prohibited for sale within the UAE will be cancelled prior to shipment. We take proactive measures to ensure that only products permitted for sale in United Arab Emirates are listed on our website.
All items are shipped by air, and any products classified as “Dangerous Goods (DG)” under IATA regulations will be removed from the order and cancelled.
All orders are processed manually, and we make every effort to process them promptly once confirmed. Products cancelled due to the above reasons will be permanently removed from listings across the website.
Description:
Review:
5.0 out of 5 stars Can Also Be Used As A Roof Vent - READ IF YOU WANT TO KNOW HOW
(function() { P.when('cr-A', 'ready').execute(function(A) { if(typeof A.toggleExpanderAriaLabel === 'function') { A.toggleExpanderAriaLabel('review_text_read_more', 'Read more of this review', 'Read less of this review'); } }); })(); .review-text-read-more-expander:focus-visible { outline: 2px solid #2162a1; outline-offset: 2px; border-radius: 5px; } I could not reach my gable area of the home as it was too tight. My home has four (4) existing static air vents that are about 14 inches in diameter in the roof of the home so that air can naturally flow up from the vents in the eves and out the roof by simple physics of heat rising. But that really is not that optimal and never has been for any home. I have searched for any forced air electrical unit that could be installed below one of those static vents and force a lot more air out of the attic through the roof. There is nothing on the market. I am an engineer, so I just took the time to research enough gable vents to find the right one and this is it. What is important to know is that most gable vents have a high CFM (Cubic Ft Per Minute) of airflow of around 1600-2500. Forcing that much air into a static roof vent will cause a venturi effect due to the inability of the roof vent to accommodate that much air flow. This actually causes more noise. This is why I chose this unit. Much smaller, 820 CFM, easy to install and comes with a rheostat to control the speed of the fan in case the existing static roof vent cannot accept that much air flow. I found that the unit works just fine on full speed of 820 CFM and there is absolutely no noise at all. The unit is ultra quiet. If anyone plans to do the same thing I have done, just get the unit without the rheostat and only the thermostat and save the money. It will work without any noise if you have a decent size existing roof static vent. IMPORTANT INSTALL INSTRUCTIONS: In order for this to work, you will need to install two 2 X 4's between the roof joists 10.5" inches apart and centered over the hole that was cut for the existing roof static vent (photos included). Then two more 2 X 4's between the two I just mentioned, and once again, 10.5 inches apart and centered over the existing hole for the static roof vent. This creates a 10.5" inch square box. The 2 X 4's need to be mounted upright (not flat) so there is a 3.5" inch deep square to insert this new attic fan. YOU MUST REMOVE THE AUTOMATIC SHUTTER that comes with the fan. Very simple and only has 3 screws that hold it in place on each side of the fan. Now you have just a fan and a square metal box that holds the fan. Screw that metal box into the 10.5" inch wooden square you framed as mentioned above. Then plug the unit in using the 6ft long cord and you are done. If you do not have a plug nearby, you can use an extension cord. But the extension cord should be a 3 prong grounded plug since the cord that comes on the fan is a 3 prong plug. I have enclosed photos. Very easy to do and took me less than an hour start to finish, and I also ran wiring and installed an outlet to plug into. One of the photos is of the rheostat that comes with this unit. It has a 3 prongs on the rear to plug directly into an outlet and the cord from the fan plugs into the bottom of this rheostat. The manufacturer of this unit give you no information to know that or the length of the cord, among other things. This is why my review is so long. Now you should know everything so you can do this yourself. My plan is to add another one at the other end of the house since the home is quite large. Already making a difference in the amount of heat in my attic.
5.0 out of 5 stars Works great
I installed this in my palram canopia 6x10 Greenhouse. The greenhouse temp can get way over 100° in the summer but this exhaust fan helps bring temp and humidity down to where i can be inside for longer than a few minutes. It automatically turns on when temp goes above 80°. This was a great buy. I would definitely recommend.
5.0 out of 5 stars Works really well
Easy set up and works really well. I took the shutters off and vented it directly out of an existing roof vent. So far so good. I might get another one if this one dosen't move enough air.
4.0 out of 5 stars Yes it will work in a horizontal position. It is inexpensive not ‘ cheap’
Has UlL listing stickers, the ‘fan only’ unit I got had no cord, It seems pretty well crafted, but boy is that wiring compartment is darn small., getting the ground screw loosened in the bottom was a pain. I dunno what size screw it was neither any metric nor inch size nut driver I had would fit. But when fired up it, ran great , pretty powerful for a. 10inch fan. Yeah, I’d buy it again. My application needed to be installed in a horizontal position and the louvers popped right open. So it will work.Update April ‘22- got a second one to air out garage. Interestingly, the size of the wiring compartment has been enlarged., ground screw install was effortless. . Is someone reading my reviews & responding accordingly.? I appears so. Also the lovers have a blue plastic coating, apparently to seal better when closed. So I’m upping to 5 stars. As I said it’s powerful, quiet no vibration, well built. I like to buy USA made products which it is not, but the quality of this build could go up against anyone. It is nice to see a company take pride in the products and make something sturdy, as well as improve quality. Nice going iLiving!
5.0 out of 5 stars Flaps do not stop water for pouring in during rain with any small amount of wind.
Great fan function, flaps move well.I'd recommend this for a dry climate, water poured into our cargo container through these flaps when it rained. They are so light they won't stay closed with any wind from outside! Beautiful parts that cannot be used anywhere it rains.I liked the ease of installation and the length of the electric cord was suitable for mounting about 4 feet up from the floor, unless you called an electrician to put in a new outlet closer to the 8 ft. ceiling. Not bad for an added $200 expense.
5.0 out of 5 stars Strong exhaust for garage
Works great. Has run near constantly since purchase 2+ years ago.Be sure to occasionally clean and oil it
5.0 out of 5 stars Powerful!
Installed one in each of my metal roofed sheds to keep the heat down inside and man these things push air! Straightforward install and built extremely well. The thermostat feature is exactly what I wanted.
5.0 out of 5 stars Good product
excellent fan perfect for 1 storage
No apto para cocinas
(function() { P.when('cr-A', 'ready').execute(function(A) { if(typeof A.toggleExpanderAriaLabel === 'function') { A.toggleExpanderAriaLabel('review_text_read_more', 'Read more of this review', 'Read less of this review'); } }); })(); .review-text-read-more-expander:focus-visible { outline: 2px solid #2162a1; outline-offset: 2px; border-radius: 5px; } Poca resistencia a la grasa en el aire de una cocina. Requiere mantenimiento continuo y rápidamente pierde su velocidad máxima.
Wiring should be not for receptacle pnly
It was very good
Livraison rapide
Tel que la description
Still Working
I purchased 2 of these units to install in my Cottage. One mounted inside the cottage on the wall to extract air and the the other in the Cottage Attic where one of the exit vents was located. I am not at the cottage often and I want fresh air all the time, so, I crack the windows at one end of the building and the fan is mounted in the wall at the other and I have it set on a timer. I should have thought of this years ago. What a difference in air quality when I arrive at the cottage. So far, so good. The bearings are holding up and the fans still run like new.
Pas bruyant et facile de contrôle de vitesse
Pour transfert d’air chaud de l’atelier à la salle mecanique
Similar suggestions by Bolo
More from this brand
Similar items from “Ventilation Fans”
Share with
Or share with link
https://www.bolo.ae/products/UO08GTYIZS9