Description:
Reviews:
5.0 out of 5 stars Great drill bits. And use the right power drill
They work amazing.They do a great job.I used it for 4 large screws only.But absolutely no wear and tear on the drill bits and works super well.But you need the right power drill.Simple economical ones won’t do the job.
5.0 out of 5 stars Great for tile if you work slow and keep them cool!
Some tile is HARD to drill through. I needed to install shower safety bars and neither my regular drill bits nor my carbide masonry bits could make a hole.I decided to try this set and I'm glad I did!I used the smallest bit first to drill the (12) pilot holes. I drilled at a very low speed, dipping the tip of the drill bit in a glass of water every 30 seconds to cool it off. It was a slow process. I was concerned that the bit would wear out and tried a couple of times to switch to a carbide masonry bit to finish the holes, but those just wouldn't penetrate the tile. My concern was unfounded. The smallest bit from this set made it through all 12 holes, slow and steady.Then I enlarged the holes with each next size up until they were big enough. That went much more quickly. It seems that the initial holes are very tough, but enlarging holes is easier. Even my carbide masonry bits worked for that.These bits are a great value, and work wonderfully if you take your time and make sure they don't overheat (by dipping in water). High end diamond bits would have probably saved time, but cost at least 10x as much.
5.0 out of 5 stars DKIBBITH Tile bit set
Excellent cut quality. No skating or drifting. No pilot holes. 5 holes in one 4 inch tile, with no breakage or cracking, on an unsupported tile. No chipping on all but the 1/2 inch bit, but it was minimal, and a bit of water, or higher speed than what I used, is very manageable. 4 pointed bit made drilling very easy with only a very fine powder left. Excellent product!
4.0 out of 5 stars Slow but work
Took 15 minutes to drill through the tile. Broke after 3 to 4 holes
5.0 out of 5 stars Great on Ceramic Tile
Excellent item, exactly as described. Drilled through ceramic tile with no problem; a pilot hole was not required. Super happy with the results.
3.0 out of 5 stars Ok budget bits.
Received in a box containing all 10 bits in a cheap, but decent protective case which slides open like a drawer. The case tray has 5 slots to store all 10 bits. The bits are metal with an arrow tip, presumably carbide. The assortment is as follows: 1/8", 5/32", 3/16", 5/16", 3/8", 1/2" (One of each), and four 1/4". They are meant for wet use and should be cooled frequently (5-10 secs continuous drilling). Don't wait till you see steam/vapor or hot color (orange/yellow/red). I lost 2 tips that fell off that way on the first use. Fortunately, one was a 1/4" and had 3 more (Maybe that's why they give you 4), but also the only 5/16". Not a good way to start when you lose 20% on the first use. I used them to drill through stone and tile walls. I guess they are ok for the occasional home DIY user but keep your expectations low and use water cooling a lot. I doubt they will withstand frequent heavy use. Ironically, I don't see it listed anymore (When I click on the item in my order, other assortments pop up with different combinations. I didn't expect much (10 bits for less than$6), and thus not disappointed. Thank you.
5.0 out of 5 stars Good quality
Worked great on tile !
4.0 out of 5 stars Not the best quality
Doesn't last through just a few holes. Quality is not what I was hoping for
Not good quality
Not good quality
Buen desempeño
Se nota que son de buen material, se siente bastante rígidas, en cuanto al filo me duro lo suficiente para lo que requería, la verdad no se cual sea el tiempo de vida de este tipo de broca o de alguna otra marca, pero en general me parecieron bien en cuanto al precio. Lo volvería a comprar. Nota: para mejorar el desempeño hay que usar un poco e agua en la punta e las brocas.
Buen juego
se desgaste la que use para porcelana to muy duro. pero en otros cerámicos y porcelanatos funcionaron varias veces.Lo mejor es que al ser puntiagudas no se mueven y perforan bien.Mejor que las de widia que compra en la ferretería que son planas y duran lo mismo.
Ca brise très vite
Ca brise vite....
Llego en tiempo
Parece de buen calidad aún no lo he usado
Visit the DKIBBITH Store
10-Piece Masonry Drill Bit Set for Concrete Tile Glass Ceramic Brick,1/8 to 1/2 Inch Drilling Bits with Triangle Handle,Tungsten Steel Alloy Tip.（Black）
AED4647
Quantity:
Order today to get by 7-14 business days
Delivery fee of AED 20. Free for orders above AED 200.
Imported From: United States
At BOLO, we work hard to ensure the products you receive are new, genuine, and sourced from reputable suppliers.
BOLO is not an authorized or official retailer for most brands, nor are we affiliated with manufacturers unless specifically stated on a product page. Instead, we source verified sellers, authorized distributors or directly from the manufacturer.
Each product undergoes thorough inspection and verification at our consolidation and fulfilment centers to ensure it meets our strict authenticity and quality standards before being shipped and delivered to you.
If you ever have concerns regarding the authenticity of a product purchased from us, please contact Bolo Support. We will review your inquiry promptly and, if necessary, provide documentation verifying authenticity or offer a suitable resolution.
Your trust is our top priority, and we are committed to maintaining transparency and integrity in every transaction.
All product information, images, descriptions, and reviews originate from the manufacturer or from trusted sellers overseas. BOLO is not affiliated with, endorsed by, or an authorized retailer for most brands listed on our website unless stated otherwise.
While we strive to display accurate information, variations in packaging, labeling, instructions, or formulation may occasionally occur due to regional differences or supplier updates. For detailed or manufacturer-specific information, please contact the brand directly or reach out to BOLO Support for assistance.
Unless otherwise stated, all prices displayed on the product page include applicable taxes and import duties.
BOLO operates in accordance with the laws and regulations of United Arab Emirates. Any items found to be restricted or prohibited for sale within the UAE will be cancelled prior to shipment. We take proactive measures to ensure that only products permitted for sale in United Arab Emirates are listed on our website.
All items are shipped by air, and any products classified as “Dangerous Goods (DG)” under IATA regulations will be removed from the order and cancelled.
All orders are processed manually, and we make every effort to process them promptly once confirmed. Products cancelled due to the above reasons will be permanently removed from listings across the website.
Similar suggestions by Bolo
More from this brand
Similar items from “Masonry Drill Bit Sets”
Share with
Or share with link
https://www.bolo.ae/products/UO088DSX6U6
Visit the DKIBBITH Store
10-Piece Masonry Drill Bit Set for Concrete Tile Glass Ceramic Brick,1/8 to 1/2 Inch Drilling Bits with Triangle Handle,Tungsten Steel Alloy Tip.（Black）
AED4647
Quantity:
Order today to get by 7-14 business days
Delivery fee of AED 20. Free for orders above AED 200.
Imported From: United States
At BOLO, we work hard to ensure the products you receive are new, genuine, and sourced from reputable suppliers.
BOLO is not an authorized or official retailer for most brands, nor are we affiliated with manufacturers unless specifically stated on a product page. Instead, we source verified sellers, authorized distributors or directly from the manufacturer.
Each product undergoes thorough inspection and verification at our consolidation and fulfilment centers to ensure it meets our strict authenticity and quality standards before being shipped and delivered to you.
If you ever have concerns regarding the authenticity of a product purchased from us, please contact Bolo Support. We will review your inquiry promptly and, if necessary, provide documentation verifying authenticity or offer a suitable resolution.
Your trust is our top priority, and we are committed to maintaining transparency and integrity in every transaction.
All product information, images, descriptions, and reviews originate from the manufacturer or from trusted sellers overseas. BOLO is not affiliated with, endorsed by, or an authorized retailer for most brands listed on our website unless stated otherwise.
While we strive to display accurate information, variations in packaging, labeling, instructions, or formulation may occasionally occur due to regional differences or supplier updates. For detailed or manufacturer-specific information, please contact the brand directly or reach out to BOLO Support for assistance.
Unless otherwise stated, all prices displayed on the product page include applicable taxes and import duties.
BOLO operates in accordance with the laws and regulations of United Arab Emirates. Any items found to be restricted or prohibited for sale within the UAE will be cancelled prior to shipment. We take proactive measures to ensure that only products permitted for sale in United Arab Emirates are listed on our website.
All items are shipped by air, and any products classified as “Dangerous Goods (DG)” under IATA regulations will be removed from the order and cancelled.
All orders are processed manually, and we make every effort to process them promptly once confirmed. Products cancelled due to the above reasons will be permanently removed from listings across the website.
Description:
Reviews:
5.0 out of 5 stars Great drill bits. And use the right power drill
They work amazing.They do a great job.I used it for 4 large screws only.But absolutely no wear and tear on the drill bits and works super well.But you need the right power drill.Simple economical ones won’t do the job.
5.0 out of 5 stars Great for tile if you work slow and keep them cool!
Some tile is HARD to drill through. I needed to install shower safety bars and neither my regular drill bits nor my carbide masonry bits could make a hole.I decided to try this set and I'm glad I did!I used the smallest bit first to drill the (12) pilot holes. I drilled at a very low speed, dipping the tip of the drill bit in a glass of water every 30 seconds to cool it off. It was a slow process. I was concerned that the bit would wear out and tried a couple of times to switch to a carbide masonry bit to finish the holes, but those just wouldn't penetrate the tile. My concern was unfounded. The smallest bit from this set made it through all 12 holes, slow and steady.Then I enlarged the holes with each next size up until they were big enough. That went much more quickly. It seems that the initial holes are very tough, but enlarging holes is easier. Even my carbide masonry bits worked for that.These bits are a great value, and work wonderfully if you take your time and make sure they don't overheat (by dipping in water). High end diamond bits would have probably saved time, but cost at least 10x as much.
5.0 out of 5 stars DKIBBITH Tile bit set
Excellent cut quality. No skating or drifting. No pilot holes. 5 holes in one 4 inch tile, with no breakage or cracking, on an unsupported tile. No chipping on all but the 1/2 inch bit, but it was minimal, and a bit of water, or higher speed than what I used, is very manageable. 4 pointed bit made drilling very easy with only a very fine powder left. Excellent product!
4.0 out of 5 stars Slow but work
Took 15 minutes to drill through the tile. Broke after 3 to 4 holes
5.0 out of 5 stars Great on Ceramic Tile
Excellent item, exactly as described. Drilled through ceramic tile with no problem; a pilot hole was not required. Super happy with the results.
3.0 out of 5 stars Ok budget bits.
Received in a box containing all 10 bits in a cheap, but decent protective case which slides open like a drawer. The case tray has 5 slots to store all 10 bits. The bits are metal with an arrow tip, presumably carbide. The assortment is as follows: 1/8", 5/32", 3/16", 5/16", 3/8", 1/2" (One of each), and four 1/4". They are meant for wet use and should be cooled frequently (5-10 secs continuous drilling). Don't wait till you see steam/vapor or hot color (orange/yellow/red). I lost 2 tips that fell off that way on the first use. Fortunately, one was a 1/4" and had 3 more (Maybe that's why they give you 4), but also the only 5/16". Not a good way to start when you lose 20% on the first use. I used them to drill through stone and tile walls. I guess they are ok for the occasional home DIY user but keep your expectations low and use water cooling a lot. I doubt they will withstand frequent heavy use. Ironically, I don't see it listed anymore (When I click on the item in my order, other assortments pop up with different combinations. I didn't expect much (10 bits for less than$6), and thus not disappointed. Thank you.
5.0 out of 5 stars Good quality
Worked great on tile !
4.0 out of 5 stars Not the best quality
Doesn't last through just a few holes. Quality is not what I was hoping for
Not good quality
Not good quality
Buen desempeño
Se nota que son de buen material, se siente bastante rígidas, en cuanto al filo me duro lo suficiente para lo que requería, la verdad no se cual sea el tiempo de vida de este tipo de broca o de alguna otra marca, pero en general me parecieron bien en cuanto al precio. Lo volvería a comprar. Nota: para mejorar el desempeño hay que usar un poco e agua en la punta e las brocas.
Buen juego
se desgaste la que use para porcelana to muy duro. pero en otros cerámicos y porcelanatos funcionaron varias veces.Lo mejor es que al ser puntiagudas no se mueven y perforan bien.Mejor que las de widia que compra en la ferretería que son planas y duran lo mismo.
Ca brise très vite
Ca brise vite....
Llego en tiempo
Parece de buen calidad aún no lo he usado
Similar suggestions by Bolo
More from this brand
Similar items from “Masonry Drill Bit Sets”
Share with
Or share with link
https://www.bolo.ae/products/UO088DSX6U6