Description:
Review:
5.0 out of 5 stars Take your time putting it together!
Got this for a 2005 Accord key where the plastic around the metal blade had started to crack badly. I expected this to be a very quick install, but it ended up being a lot more involved than I expected. Not surprisingly, the instructions are very limited - here are some things I found that I hope you may find useful.1) Your old metal blade may be very hard to remove from the old key housing. In my case, since it was already cracking around it, I was able to snap it out, but if the housing wasn't damaged around the blade you may need to use side cutters to cut the plastic off around it. Trying to lever the key out of the housing may result in bending it if the plastic isn't already cracked - so be careful.2a) If you have a transponder (I did! See the first and second photos) you may be in for a wild ride figuring out how to deal with it. To start, it was incredibly difficult to remove, in addition to being press fit into the top plastic shell with a little cap over it, one end had a small blob of glue holding it in place. I ended up needing to cut out the plastic around it with an x-acto knife to free it.2b) Once the chip is out, there's no way to mount it like in the OEM key, just a space where it can go. It will definitely rattle around, and if the key ever cracks open for any reason it will almost certainly be lost - meaning you won't be able to start the car. I ended up using two little blobs of hot glue, one in the bottom of the spot where the chip sits, and then one along the top edge of the remote unit. If you choose to use glue, make sure you use a glue that can be removed! I almost used epoxy but then realized I would never be able to get the remote out to change the battery! Hot glue will keep it from rattling around inside, but then can be peeled off later when it's time to change the battery.3) The plastic frame that slides over the blade fits VERY snugly. If you have any crud on the blade, especially around the bottom, it will have a hard time going down. Clean the blade with an alcohol wipe or similar to get around this. Once it's clean, note the orientation of the frame to the blade, there's a taper at the bottom that should be clear, then pull the frame down with even pressure one each side. The hole in the blade may not perfectly align with the holes in the frame. Mine still ended up going together just fine despite this, but be aware of it.4) The blade/frame piece does not float between the two halves of the housing, it mounts into the back half. There are grooves it will slide into, then click into place. Again, if you look closely, it will be intuitive.5) The halves hinge together from the back of the housing, at the key ring slot.6) Do not over-tighten the screw - if it's not going in smoothly, take it out and make sure it's aligned well. Once it's all the way in, don't "torque" it down - you'll either snap it in half or strip the threading in the housing.This is a good product at a great price and I expect it will hold up well, but take care when assembling it or you'll end up buying another one.
5.0 out of 5 stars Perfect and easy to set up!
Fit perfectly on my key and was super easy to set up. And the price was the best part. I had gone into my dealership’s shop to see if they could replace the case and they gave me some BS $350-$450 estimate!! For a tiny plastic casing for my key!!! They claimed some BS need to do this and that either the electronic components and yet here I am, bought this $6 (on sale) case and installed it myself easily in just a few short minutes!! Thank god I didn’t go with the dealership’s offer!
5.0 out of 5 stars Great product - cheaper alternative to a new key
Wow. Saved me a lot of money compared to getting a new key. Rescued an old Honda FOB and took only 5 minutes to install. Be patient with getting the key to sit right and lined up with the screw hole.
4.0 out of 5 stars This works!
The keyfob on my 2012 Honda Accord was cracked on the front between some of the buttons and around the right side. When you put it in the ignition to start the car and turned it, the whole case would flex, and it felt like it was about to snap apart, so I purchased this.When I received this, I took the screw out and pried off the back of the shell, and pulled the button/transmitter part out of the front. I do not have the transponder chip, so I didn't have to worry about that.The first problem I had was that the metal key part seemed to be molded into the base of the front piece, and I debated on continuing. After thinking about this for a while, I decided to go for it and pry out the key by holding the top and prying the key part up and down with some force. After doing this for a bit, the top of the key (the T part) popped right out.I cleaned up the key and the button/transmitter. I slid the key into the key holder plastic part (the smallest plastic part). When I got to the top of the key, it was a little difficult to get the key to seat properly into this. I got a straight screwdriver and pushed down on the top of the key while holding the plastic part. Note: The screw hole on one side was at the top of the hole, and not in the middle like I expected.The second problem I had was putting the key part into the shell. It fits fine into the front, but the back would not snap on. I took it apart and looked at it again and realized there were two notches in the back of the case where the key holder goes with two corresponding notches on the key holder. So, I put the key holder part into the back, slid it down onto the notches, and then I was able to close the front onto the back, and I put the screw in.It seems to be solid, and it works well.
5.0 out of 5 stars Perfect to rebuild fob
Awesome product, saved me $150, my key was fine but the plastic broke. Since the electronic are fine, saved a ton. No key cutting or programming. It took about 5 min to rebuild the new keyfob
5.0 out of 5 stars Perfect fit. Case is solid.
Love the price! Perfect fit for 2007 Honda Civic Hybrid.Case is nice and solid.My old case broke and was preventing me from starting my car.This case has an extra plastic piece that supports and holds your metal key in place.Install was very easy. As long as you are using the same internal fob and metal key it will connect to your car still.10/10 recommend.
Funcional
Quedó perfecta y resolvió mi problema, además de que llegó muy rápido.
Excelente producto!
Llego rápido y la verdad muy fácil de instalar la llave, el material se ve de buena calidad. Lo único que le faltó es el logo de HONDA en la parte posterior pero fuera de eso todo excelente. Y el destornillador es un plus.
Doesn't snap together - mismatched key adapter with enclosures. Do not buy
Defective product. When fully assembled, the two shells won't snap together. It looks like the key adapter is mismatched with the two enclosures. Does not work for my 2010 Honda Accord keys. Very disappointed, but what can you expect from something that's less than 10 bucks.
muy útil
embona perfectamente con la llave del civic 2006
Super precio
Sirvió perfecto y no requerí llevarlo con un experto. Un excelente precio en comparación con otros lugares en los que los busque.
Visit the USARemote Store
Cutting NOT Required - 2 Key Fob Keyless Entry Remote Shell Case & Pad fits Honda 2003-2012 Accord / 2006-2013 Civic EX / 2009-2015 Pilot /2005-2006 CR-V
AED6335
Quantity:
Order today to get by
Free delivery on orders over AED 200
Imported From: United States
At bolo.ae, we stand behind the authenticity and quality of every product we sell. We guarantee that all items offered on our website are 100% genuine, sourced directly from authorized distributors, trusted partners, or the original brands themselves.
We do not sell counterfeit, replica, or unauthorized goods. Each product undergoes thorough inspection and verification at our consolidation and fulfilment centers to ensure it meets our strict authenticity and quality standards before being shipped and delivered to you.
If you ever have concerns regarding the authenticity of a product purchased from us, please contact Bolo Support . We will review your inquiry promptly and, if necessary, provide documentation verifying authenticity or offer a suitable resolution.
Your trust is our top priority, and we are committed to maintaining transparency and integrity in every transaction.
All product information, including images, descriptions, and reviews, is provided by third-party vendors. bolo.ae is not responsible for any claims, promotions, or representations made within product content or images. For more accurate or detailed product information, please contact the manufacturer directly or reach out to Bolo Support.
Unless otherwise stated during checkout, all prices displayed on the product page include applicable taxes and import duties.
bolo.ae operates in accordance with the laws and regulations of United Arab Emirates. Any items found to be restricted or prohibited for sale within the UAE will be cancelled prior to shipment. We take proactive measures to ensure that only products permitted for sale in United Arab Emirates are listed on our website.
All items are shipped by air, and any products classified as “Dangerous Goods (DG)” under IATA regulations will be removed from the order and cancelled.
All orders are processed manually, and we make every effort to process them promptly once confirmed. Products cancelled due to the above reasons will be permanently removed from listings across the website.
Similar suggestions by Bolo
More from this brand
Similar items from “Key Shells”
Share with
Or share with link
https://www.bolo.ae/products/UO07D5TKFAO
Visit the USARemote Store
Cutting NOT Required - 2 Key Fob Keyless Entry Remote Shell Case & Pad fits Honda 2003-2012 Accord / 2006-2013 Civic EX / 2009-2015 Pilot /2005-2006 CR-V
AED6335
Quantity:
Order today to get by
Free delivery on orders over AED 200
Imported From: United States
At bolo.ae, we stand behind the authenticity and quality of every product we sell. We guarantee that all items offered on our website are 100% genuine, sourced directly from authorized distributors, trusted partners, or the original brands themselves.
We do not sell counterfeit, replica, or unauthorized goods. Each product undergoes thorough inspection and verification at our consolidation and fulfilment centers to ensure it meets our strict authenticity and quality standards before being shipped and delivered to you.
If you ever have concerns regarding the authenticity of a product purchased from us, please contact Bolo Support . We will review your inquiry promptly and, if necessary, provide documentation verifying authenticity or offer a suitable resolution.
Your trust is our top priority, and we are committed to maintaining transparency and integrity in every transaction.
All product information, including images, descriptions, and reviews, is provided by third-party vendors. bolo.ae is not responsible for any claims, promotions, or representations made within product content or images. For more accurate or detailed product information, please contact the manufacturer directly or reach out to Bolo Support.
Unless otherwise stated during checkout, all prices displayed on the product page include applicable taxes and import duties.
bolo.ae operates in accordance with the laws and regulations of United Arab Emirates. Any items found to be restricted or prohibited for sale within the UAE will be cancelled prior to shipment. We take proactive measures to ensure that only products permitted for sale in United Arab Emirates are listed on our website.
All items are shipped by air, and any products classified as “Dangerous Goods (DG)” under IATA regulations will be removed from the order and cancelled.
All orders are processed manually, and we make every effort to process them promptly once confirmed. Products cancelled due to the above reasons will be permanently removed from listings across the website.
Description:
Review:
5.0 out of 5 stars Take your time putting it together!
Got this for a 2005 Accord key where the plastic around the metal blade had started to crack badly. I expected this to be a very quick install, but it ended up being a lot more involved than I expected. Not surprisingly, the instructions are very limited - here are some things I found that I hope you may find useful.1) Your old metal blade may be very hard to remove from the old key housing. In my case, since it was already cracking around it, I was able to snap it out, but if the housing wasn't damaged around the blade you may need to use side cutters to cut the plastic off around it. Trying to lever the key out of the housing may result in bending it if the plastic isn't already cracked - so be careful.2a) If you have a transponder (I did! See the first and second photos) you may be in for a wild ride figuring out how to deal with it. To start, it was incredibly difficult to remove, in addition to being press fit into the top plastic shell with a little cap over it, one end had a small blob of glue holding it in place. I ended up needing to cut out the plastic around it with an x-acto knife to free it.2b) Once the chip is out, there's no way to mount it like in the OEM key, just a space where it can go. It will definitely rattle around, and if the key ever cracks open for any reason it will almost certainly be lost - meaning you won't be able to start the car. I ended up using two little blobs of hot glue, one in the bottom of the spot where the chip sits, and then one along the top edge of the remote unit. If you choose to use glue, make sure you use a glue that can be removed! I almost used epoxy but then realized I would never be able to get the remote out to change the battery! Hot glue will keep it from rattling around inside, but then can be peeled off later when it's time to change the battery.3) The plastic frame that slides over the blade fits VERY snugly. If you have any crud on the blade, especially around the bottom, it will have a hard time going down. Clean the blade with an alcohol wipe or similar to get around this. Once it's clean, note the orientation of the frame to the blade, there's a taper at the bottom that should be clear, then pull the frame down with even pressure one each side. The hole in the blade may not perfectly align with the holes in the frame. Mine still ended up going together just fine despite this, but be aware of it.4) The blade/frame piece does not float between the two halves of the housing, it mounts into the back half. There are grooves it will slide into, then click into place. Again, if you look closely, it will be intuitive.5) The halves hinge together from the back of the housing, at the key ring slot.6) Do not over-tighten the screw - if it's not going in smoothly, take it out and make sure it's aligned well. Once it's all the way in, don't "torque" it down - you'll either snap it in half or strip the threading in the housing.This is a good product at a great price and I expect it will hold up well, but take care when assembling it or you'll end up buying another one.
5.0 out of 5 stars Perfect and easy to set up!
Fit perfectly on my key and was super easy to set up. And the price was the best part. I had gone into my dealership’s shop to see if they could replace the case and they gave me some BS $350-$450 estimate!! For a tiny plastic casing for my key!!! They claimed some BS need to do this and that either the electronic components and yet here I am, bought this $6 (on sale) case and installed it myself easily in just a few short minutes!! Thank god I didn’t go with the dealership’s offer!
5.0 out of 5 stars Great product - cheaper alternative to a new key
Wow. Saved me a lot of money compared to getting a new key. Rescued an old Honda FOB and took only 5 minutes to install. Be patient with getting the key to sit right and lined up with the screw hole.
4.0 out of 5 stars This works!
The keyfob on my 2012 Honda Accord was cracked on the front between some of the buttons and around the right side. When you put it in the ignition to start the car and turned it, the whole case would flex, and it felt like it was about to snap apart, so I purchased this.When I received this, I took the screw out and pried off the back of the shell, and pulled the button/transmitter part out of the front. I do not have the transponder chip, so I didn't have to worry about that.The first problem I had was that the metal key part seemed to be molded into the base of the front piece, and I debated on continuing. After thinking about this for a while, I decided to go for it and pry out the key by holding the top and prying the key part up and down with some force. After doing this for a bit, the top of the key (the T part) popped right out.I cleaned up the key and the button/transmitter. I slid the key into the key holder plastic part (the smallest plastic part). When I got to the top of the key, it was a little difficult to get the key to seat properly into this. I got a straight screwdriver and pushed down on the top of the key while holding the plastic part. Note: The screw hole on one side was at the top of the hole, and not in the middle like I expected.The second problem I had was putting the key part into the shell. It fits fine into the front, but the back would not snap on. I took it apart and looked at it again and realized there were two notches in the back of the case where the key holder goes with two corresponding notches on the key holder. So, I put the key holder part into the back, slid it down onto the notches, and then I was able to close the front onto the back, and I put the screw in.It seems to be solid, and it works well.
5.0 out of 5 stars Perfect to rebuild fob
Awesome product, saved me $150, my key was fine but the plastic broke. Since the electronic are fine, saved a ton. No key cutting or programming. It took about 5 min to rebuild the new keyfob
5.0 out of 5 stars Perfect fit. Case is solid.
Love the price! Perfect fit for 2007 Honda Civic Hybrid.Case is nice and solid.My old case broke and was preventing me from starting my car.This case has an extra plastic piece that supports and holds your metal key in place.Install was very easy. As long as you are using the same internal fob and metal key it will connect to your car still.10/10 recommend.
Funcional
Quedó perfecta y resolvió mi problema, además de que llegó muy rápido.
Excelente producto!
Llego rápido y la verdad muy fácil de instalar la llave, el material se ve de buena calidad. Lo único que le faltó es el logo de HONDA en la parte posterior pero fuera de eso todo excelente. Y el destornillador es un plus.
Doesn't snap together - mismatched key adapter with enclosures. Do not buy
Defective product. When fully assembled, the two shells won't snap together. It looks like the key adapter is mismatched with the two enclosures. Does not work for my 2010 Honda Accord keys. Very disappointed, but what can you expect from something that's less than 10 bucks.
muy útil
embona perfectamente con la llave del civic 2006
Super precio
Sirvió perfecto y no requerí llevarlo con un experto. Un excelente precio en comparación con otros lugares en los que los busque.
Similar suggestions by Bolo
More from this brand
Similar items from “Key Shells”
Share with
Or share with link
https://www.bolo.ae/products/UO07D5TKFAO