Description:
The Harris Solder Kit SB861 & SCPF4 includes Stay-Brite #8 Silver Bearing Solder with Flux, offering high-quality, versatile soldering for strong and corrosion-resistant joints in applications such as HVAC, refrigeration, and electronics. It's a comprehensive solution for both professionals and DIY enthusiasts, ensuring reliable results.
Reviews:
5.0 out of 5 stars Works very well!
This stuff is awesome. It holds well for HVAC work. Easier than brazing for sure.
5.0 out of 5 stars Good stuff for HVAC work. But make sure the swaged ends are snug
Great flux and solder. I used it to install a new central split and had no leaks during a 500psi pressure test & 300 micron vacuum for 1 hour.One thing I had to do was cut off one of the swaged ends and expand it myself. The bell was just a tad loose and the StaBrite didn't want to fill it. I made a new bell that was a tight fit and the joint looked much better. It was probably ok, but I didn't want to risk having to do it again when it was inconvenient.This is good stuff and I highly recommend it. Adhere to good practices (scuff, tight fit, and don't overheat) and it works great for HVAC work. Easier than brazing and I trust having the larger bonding surface of solder more than the narrow bonding surface of brazing.
5.0 out of 5 stars Nice product
Nice product
5.0 out of 5 stars Worked great on soldering on a new AC connection
I just installed a new central air conditioner I had to cut the lines and install new ends on them and I'm not experienced at brazing nor do I have the equipment I read that you can use this particular solder as it works for the regular torch and they're correct it works fantastic finished installing the air conditioner, vacuumed it down it's working fantastic
4.0 out of 5 stars Good for plumbing, but not for HVAC
Great for plumbing work, but I would NOT recommend for HVAC work - although some use it. IMHO, It is too "wet" when heated and can wash into joints easily leaving loose beads of solder inside the refrigerant lines. Requires a careful attention to details.
5.0 out of 5 stars Great for HVAC Work
I love this Harris solder for HVAC applications. You can solder fittings at lower temperature without needing to run a nitrogen purge during brazing (brazing requires a nitrogen blanket to avoid heavy oxidation residue inside your piping). The only argument I have heard against this solder is that the flux leaves acid residue inside the piping. This can be avoided using a proper soldering technique ... sand/brush copper clean, fit together, heat, apply flux AFTER heating (this causes it to be wicked into the joint as necessary), then apply solder.
5.0 out of 5 stars Good stuff
Worked to fix my heat pump high pressure line and to replace an inline filter dryer.
5.0 out of 5 stars Easy to use
I installed my new central air system and used it to solder my copper lines. I liked the idea that I only needed to buy a Bernzomatic map gas torch instead of a traditional acetylene/oxygen torch assembly and you don't need a nitrogen flow while you're soldering. After watching several YouTube videos, I applied the product the best I could and pressure tested the lines to 450psi and they held for the required 20 minutes. After pulling a vacuum I introduced the refrigerant and the lines have held like a charm ever since. I was very pleasantly surprised. This is a great product for small jobs or DIY type projects. It's probably not as cost effective for a professional hvac technician. Hopefully I will not need to use again for 20-30 years.
good solder bright
Good Solder
Super soldadura!
La compre un poco renuente, pero superó todas mis expectativas. Ahora ya no tengo que cargar con mi pesado equipo de oxiacetileno, solo con antorcha de gas map (turner) soldadura y fundente.Los acabados después de soldar quedan super limpios y la oxidación es minima y en la mayoría de los casos es nula, en otras palabras, super recomendado.
Visit the HARRIS Store
Harris Solder Kit SB861 & SCPF4 - Stay-Brite #8 Silver Bearing Solder with Flux
AED72901
Quantity:
Order today to get by 7-14 business days
This item qualifies for free delivery
Imported From: United States
At BOLO, we work hard to ensure the products you receive are new, genuine, and sourced from reputable suppliers.
BOLO is not an authorized or official retailer for most brands, nor are we affiliated with manufacturers unless specifically stated on a product page. Instead, we source verified sellers, authorized distributors or directly from the manufacturer.
Each product undergoes thorough inspection and verification at our consolidation and fulfilment centers to ensure it meets our strict authenticity and quality standards before being shipped and delivered to you.
If you ever have concerns regarding the authenticity of a product purchased from us, please contact Bolo Support. We will review your inquiry promptly and, if necessary, provide documentation verifying authenticity or offer a suitable resolution.
Your trust is our top priority, and we are committed to maintaining transparency and integrity in every transaction.
All product information, images, descriptions, and reviews originate from the manufacturer or from trusted sellers overseas. BOLO is not affiliated with, endorsed by, or an authorized retailer for most brands listed on our website unless stated otherwise.
While we strive to display accurate information, variations in packaging, labeling, instructions, or formulation may occasionally occur due to regional differences or supplier updates. For detailed or manufacturer-specific information, please contact the brand directly or reach out to BOLO Support for assistance.
Unless otherwise stated, all prices displayed on the product page include applicable taxes and import duties.
BOLO operates in accordance with the laws and regulations of United Arab Emirates. Any items found to be restricted or prohibited for sale within the UAE will be cancelled prior to shipment. We take proactive measures to ensure that only products permitted for sale in United Arab Emirates are listed on our website.
All items are shipped by air, and any products classified as “Dangerous Goods (DG)” under IATA regulations will be removed from the order and cancelled.
All orders are processed manually, and we make every effort to process them promptly once confirmed. Products cancelled due to the above reasons will be permanently removed from listings across the website.
Similar suggestions by Bolo
More from this brand
Similar items from “Solder”
Share with
Or share with link
https://www.bolo.ae/products/UO0799AIO4L
Visit the HARRIS Store
Harris Solder Kit SB861 & SCPF4 - Stay-Brite #8 Silver Bearing Solder with Flux
AED72901
Quantity:
Order today to get by 7-14 business days
This item qualifies for free delivery
Imported From: United States
At BOLO, we work hard to ensure the products you receive are new, genuine, and sourced from reputable suppliers.
BOLO is not an authorized or official retailer for most brands, nor are we affiliated with manufacturers unless specifically stated on a product page. Instead, we source verified sellers, authorized distributors or directly from the manufacturer.
Each product undergoes thorough inspection and verification at our consolidation and fulfilment centers to ensure it meets our strict authenticity and quality standards before being shipped and delivered to you.
If you ever have concerns regarding the authenticity of a product purchased from us, please contact Bolo Support. We will review your inquiry promptly and, if necessary, provide documentation verifying authenticity or offer a suitable resolution.
Your trust is our top priority, and we are committed to maintaining transparency and integrity in every transaction.
All product information, images, descriptions, and reviews originate from the manufacturer or from trusted sellers overseas. BOLO is not affiliated with, endorsed by, or an authorized retailer for most brands listed on our website unless stated otherwise.
While we strive to display accurate information, variations in packaging, labeling, instructions, or formulation may occasionally occur due to regional differences or supplier updates. For detailed or manufacturer-specific information, please contact the brand directly or reach out to BOLO Support for assistance.
Unless otherwise stated, all prices displayed on the product page include applicable taxes and import duties.
BOLO operates in accordance with the laws and regulations of United Arab Emirates. Any items found to be restricted or prohibited for sale within the UAE will be cancelled prior to shipment. We take proactive measures to ensure that only products permitted for sale in United Arab Emirates are listed on our website.
All items are shipped by air, and any products classified as “Dangerous Goods (DG)” under IATA regulations will be removed from the order and cancelled.
All orders are processed manually, and we make every effort to process them promptly once confirmed. Products cancelled due to the above reasons will be permanently removed from listings across the website.
Description:
The Harris Solder Kit SB861 & SCPF4 includes Stay-Brite #8 Silver Bearing Solder with Flux, offering high-quality, versatile soldering for strong and corrosion-resistant joints in applications such as HVAC, refrigeration, and electronics. It's a comprehensive solution for both professionals and DIY enthusiasts, ensuring reliable results.
Reviews:
5.0 out of 5 stars Works very well!
This stuff is awesome. It holds well for HVAC work. Easier than brazing for sure.
5.0 out of 5 stars Good stuff for HVAC work. But make sure the swaged ends are snug
Great flux and solder. I used it to install a new central split and had no leaks during a 500psi pressure test & 300 micron vacuum for 1 hour.One thing I had to do was cut off one of the swaged ends and expand it myself. The bell was just a tad loose and the StaBrite didn't want to fill it. I made a new bell that was a tight fit and the joint looked much better. It was probably ok, but I didn't want to risk having to do it again when it was inconvenient.This is good stuff and I highly recommend it. Adhere to good practices (scuff, tight fit, and don't overheat) and it works great for HVAC work. Easier than brazing and I trust having the larger bonding surface of solder more than the narrow bonding surface of brazing.
5.0 out of 5 stars Nice product
Nice product
5.0 out of 5 stars Worked great on soldering on a new AC connection
I just installed a new central air conditioner I had to cut the lines and install new ends on them and I'm not experienced at brazing nor do I have the equipment I read that you can use this particular solder as it works for the regular torch and they're correct it works fantastic finished installing the air conditioner, vacuumed it down it's working fantastic
4.0 out of 5 stars Good for plumbing, but not for HVAC
Great for plumbing work, but I would NOT recommend for HVAC work - although some use it. IMHO, It is too "wet" when heated and can wash into joints easily leaving loose beads of solder inside the refrigerant lines. Requires a careful attention to details.
5.0 out of 5 stars Great for HVAC Work
I love this Harris solder for HVAC applications. You can solder fittings at lower temperature without needing to run a nitrogen purge during brazing (brazing requires a nitrogen blanket to avoid heavy oxidation residue inside your piping). The only argument I have heard against this solder is that the flux leaves acid residue inside the piping. This can be avoided using a proper soldering technique ... sand/brush copper clean, fit together, heat, apply flux AFTER heating (this causes it to be wicked into the joint as necessary), then apply solder.
5.0 out of 5 stars Good stuff
Worked to fix my heat pump high pressure line and to replace an inline filter dryer.
5.0 out of 5 stars Easy to use
I installed my new central air system and used it to solder my copper lines. I liked the idea that I only needed to buy a Bernzomatic map gas torch instead of a traditional acetylene/oxygen torch assembly and you don't need a nitrogen flow while you're soldering. After watching several YouTube videos, I applied the product the best I could and pressure tested the lines to 450psi and they held for the required 20 minutes. After pulling a vacuum I introduced the refrigerant and the lines have held like a charm ever since. I was very pleasantly surprised. This is a great product for small jobs or DIY type projects. It's probably not as cost effective for a professional hvac technician. Hopefully I will not need to use again for 20-30 years.
good solder bright
Good Solder
Super soldadura!
La compre un poco renuente, pero superó todas mis expectativas. Ahora ya no tengo que cargar con mi pesado equipo de oxiacetileno, solo con antorcha de gas map (turner) soldadura y fundente.Los acabados después de soldar quedan super limpios y la oxidación es minima y en la mayoría de los casos es nula, en otras palabras, super recomendado.
Similar suggestions by Bolo
More from this brand
Similar items from “Solder”
Share with
Or share with link
https://www.bolo.ae/products/UO0799AIO4L