Description:
Auto Glass Sealant Windshield Urethane Glue Sikaflex P2G Primerless Adhesive x 2
Professional use product requires 26-1 Thrust Gun or Better to dispense.
Urethane is primerless to glass but requires primer to body pinchweld if needed. use Sika 207 Primer. to order
Seller highly recommends using a professional glass installer for this product.
Purchaser assumes all liability with regards to knowledge and application of this product
Reviews:
5.0 out of 5 stars Great when used correctly.
(function() { P.when('cr-A', 'ready').execute(function(A) { if(typeof A.toggleExpanderAriaLabel === 'function') { A.toggleExpanderAriaLabel('review_text_read_more', 'Read more of this review', 'Read less of this review'); } }); })(); .review-text-read-more-expander:focus-visible { outline: 2px solid #2162a1; outline-offset: 2px; border-radius: 5px; } I used 10+ tubes of this sika flex this summer. I defogged 15 windows on my Fleetwood rv. It was a big job. Remove, split, scrape, polish, reseal, assemble, install. The product was excellent. Applied smoothly. Good adhesion. Cured quickly. But...... there are some things you should know that will help you avoid the problems and complaints that some people have reported.1. Punch out the seal and make a big hole. Complaints say, the material is old or won't come out. Well, I bought tubes over a 3 month period with no bad. Urethane is a beast, but won't cure until it's out of the tube. And only the product exposed to air will cure. The inside material won't cure when the outside material is. If the tube is compromised, that should be obvious. So, the likely reasons for the complaint are: tube wasn't heated or a small hole was punched in the metal seal. Don't baby this thing. Bust open as much of the seal as possible. This stuff is thick. And cut a minimum 3/16" hole in the plastic nozzle. Let it flow... let it flow... don't hold it back anymore..2. Heat this product well. This stuff is thickkkk. You absolutely must heat it. Let the heat soak all the way thru. The tube needs to be more than warm. I set 2 pieces of wood on top of an electric fre-standing heater. It's one of those 1500 watt oil filled jobs from hd that looks like an old school steam radiator. I gap the wood 8" apart and put 2 tubes across the gap so that the heat radiates onto them. Then, a folded towel on top to hold the heat in. I let it soak for at least an hour on the low power setting. The tube gets to between warm and hot to the touch. I remove a tube when im ready and use it right away. I put a 16d nail into the nozzle when im done to keep it fresh and put it right back onto the heater. If you don't adequately heat soak the tube, the rest of your experience will be memorable.3. Annie get ur gun. A good one. Not a cheap pos. Don't even think about using that thing hanging in your garage. And if you don't do #1, #2, don't even bother continuing. Not even with a bazooka. I had over 180' of seals to apply. I used the ryobi battery op caulk gun. Worked great. Sure i blew the rivets off the end retainer. After an upgrade with hardened bolts, i was back in business. I also bought a Red Devil pro hd manual calk gun as an emergency backup, here on Bolo. Worked great. Slow.4. Be smart, stay clean, clean oopses now. This stuff is awesome for sticking to everything, long term. If you let little smears and globs go, unchecked, you will find it schmeared everywhere. Everywhere. Just like nutella. Hands, face, hair, ears, nose, glasses, elbows, doorknobs, light switches, carpet, countertops, dogs head.... so, keep the overshoot and globs to a minimum. Clean immediately with mineral spirits. Wear disposable gloves and throw them out. Clean your seal punch. Keep a roll of paper towels handy. Use them liberally, regardless of how you vote. Don't let Fido in the area while you're working.May all your seals and bonds last forever.Cheers.
5.0 out of 5 stars As good as any mame brand.
This stuff is WAY less expensive than the stuff you get at the auto glass or parts stores but it works at least as well. No leaks, spreads easily. Slow drying but a FANTASTIC seal all the way around.
5.0 out of 5 stars The stuff works great, just keep a rag with lacquer thinner. Better yet wear vinyl gloves
Good stuff
4.0 out of 5 stars Good product, not so good shipping/handling.
The product arrived fast, and itself was good. The condition I received it in not so much. Both tubes were just put inside a flimsy Bolo pouch and shipped off and arrived quite banged up.I had to spend about 20 minutes with a pair of pliers unbending the damage to the tube bottoms as well as rolling the tubes continuously to remove the dents just to make them usable in the caulking gun. One tube worked perfectly fine afterwards, the second ended up bursting in the caulking gun from the inside halfway through.
5.0 out of 5 stars Easy to use and worked great
Use latext or rubber gloves. Buy glass handling suction handle. Thick deep bead worked great for me. Push push push the glass into place. Great product unless do not use gloves. If it gets on you it will be everywhere and it is black and stays black for days. Brake fluid was good for removal from hands or carb cleaner.
5.0 out of 5 stars This stuff works great
I tried this for the first time and definitely a novice at installing windshields I tooke mine down to the metal removed all polyurethane and primered the whole pinch weld I used a caulk gun from Homedepot it was around 22usd heavy-duty I put the 2 tubes on the roof for about 2 and a half to 3 hours it worked well came out with very little effort I flattened the plastic tip wit pliers I used 2 tubes exactly on my 1989 Dodge Daytona Shelby it has done its job and no leakes at all anyone can use this stuff its definitely worth it if installing a windshield or quarter panel or rear window.
1.0 out of 5 stars Better have pop eye arms
Adhesive was so hard I could barely get it out. A 5-10 minute job took 3 times as long because of how hard it was to squeeze out. I even changed caulk guns to see if that was the issue. Would not recommend
5.0 out of 5 stars Buen producto
Buena calidad
buena calidad!!
(function() { P.when('cr-A', 'ready').execute(function(A) { if(typeof A.toggleExpanderAriaLabel === 'function') { A.toggleExpanderAriaLabel('review_text_read_more', 'Read more of this review', 'Read less of this review'); } }); })(); .review-text-read-more-expander:focus-visible { outline: 2px solid #2162a1; outline-offset: 2px; border-radius: 5px; } bien protegido y llego antes de tiempo!
Visit the SIKA Store
Auto Glass Sealant Windshield Urethane Glue Sikaflex P2G Primerless Adhesive x 2
AED18582
Quantity:
Order today to get by 7-14 business days
Delivery fee of AED 20. Free for orders above AED 200.
Imported From: United States
At BOLO, we work hard to ensure the products you receive are new, genuine, and sourced from reputable suppliers.
BOLO is not an authorized or official retailer for most brands, nor are we affiliated with manufacturers unless specifically stated on a product page. Instead, we source verified sellers, authorized distributors or directly from the manufacturer.
Each product undergoes thorough inspection and verification at our consolidation and fulfilment centers to ensure it meets our strict authenticity and quality standards before being shipped and delivered to you.
If you ever have concerns regarding the authenticity of a product purchased from us, please contact Bolo Support. We will review your inquiry promptly and, if necessary, provide documentation verifying authenticity or offer a suitable resolution.
Your trust is our top priority, and we are committed to maintaining transparency and integrity in every transaction.
All product information, images, descriptions, and reviews originate from the manufacturer or from trusted sellers overseas. BOLO is not affiliated with, endorsed by, or an authorized retailer for most brands listed on our website unless stated otherwise.
While we strive to display accurate information, variations in packaging, labeling, instructions, or formulation may occasionally occur due to regional differences or supplier updates. For detailed or manufacturer-specific information, please contact the brand directly or reach out to BOLO Support for assistance.
Unless otherwise stated, all prices displayed on the product page include applicable taxes and import duties.
BOLO operates in accordance with the laws and regulations of United Arab Emirates. Any items found to be restricted or prohibited for sale within the UAE will be cancelled prior to shipment. We take proactive measures to ensure that only products permitted for sale in United Arab Emirates are listed on our website.
All items are shipped by air, and any products classified as “Dangerous Goods (DG)” under IATA regulations will be removed from the order and cancelled.
All orders are processed manually, and we make every effort to process them promptly once confirmed. Products cancelled due to the above reasons will be permanently removed from listings across the website.
Similar suggestions by Bolo
More from this brand
Similar items from “Adhesives”
Share with
Or share with link
https://www.bolo.ae/products/UO073JXQ2P9
Visit the SIKA Store
Auto Glass Sealant Windshield Urethane Glue Sikaflex P2G Primerless Adhesive x 2
AED18582
Quantity:
Order today to get by 7-14 business days
Delivery fee of AED 20. Free for orders above AED 200.
Imported From: United States
At BOLO, we work hard to ensure the products you receive are new, genuine, and sourced from reputable suppliers.
BOLO is not an authorized or official retailer for most brands, nor are we affiliated with manufacturers unless specifically stated on a product page. Instead, we source verified sellers, authorized distributors or directly from the manufacturer.
Each product undergoes thorough inspection and verification at our consolidation and fulfilment centers to ensure it meets our strict authenticity and quality standards before being shipped and delivered to you.
If you ever have concerns regarding the authenticity of a product purchased from us, please contact Bolo Support. We will review your inquiry promptly and, if necessary, provide documentation verifying authenticity or offer a suitable resolution.
Your trust is our top priority, and we are committed to maintaining transparency and integrity in every transaction.
All product information, images, descriptions, and reviews originate from the manufacturer or from trusted sellers overseas. BOLO is not affiliated with, endorsed by, or an authorized retailer for most brands listed on our website unless stated otherwise.
While we strive to display accurate information, variations in packaging, labeling, instructions, or formulation may occasionally occur due to regional differences or supplier updates. For detailed or manufacturer-specific information, please contact the brand directly or reach out to BOLO Support for assistance.
Unless otherwise stated, all prices displayed on the product page include applicable taxes and import duties.
BOLO operates in accordance with the laws and regulations of United Arab Emirates. Any items found to be restricted or prohibited for sale within the UAE will be cancelled prior to shipment. We take proactive measures to ensure that only products permitted for sale in United Arab Emirates are listed on our website.
All items are shipped by air, and any products classified as “Dangerous Goods (DG)” under IATA regulations will be removed from the order and cancelled.
All orders are processed manually, and we make every effort to process them promptly once confirmed. Products cancelled due to the above reasons will be permanently removed from listings across the website.
Description:
Auto Glass Sealant Windshield Urethane Glue Sikaflex P2G Primerless Adhesive x 2
Professional use product requires 26-1 Thrust Gun or Better to dispense.
Urethane is primerless to glass but requires primer to body pinchweld if needed. use Sika 207 Primer. to order
Seller highly recommends using a professional glass installer for this product.
Purchaser assumes all liability with regards to knowledge and application of this product
Reviews:
5.0 out of 5 stars Great when used correctly.
(function() { P.when('cr-A', 'ready').execute(function(A) { if(typeof A.toggleExpanderAriaLabel === 'function') { A.toggleExpanderAriaLabel('review_text_read_more', 'Read more of this review', 'Read less of this review'); } }); })(); .review-text-read-more-expander:focus-visible { outline: 2px solid #2162a1; outline-offset: 2px; border-radius: 5px; } I used 10+ tubes of this sika flex this summer. I defogged 15 windows on my Fleetwood rv. It was a big job. Remove, split, scrape, polish, reseal, assemble, install. The product was excellent. Applied smoothly. Good adhesion. Cured quickly. But...... there are some things you should know that will help you avoid the problems and complaints that some people have reported.1. Punch out the seal and make a big hole. Complaints say, the material is old or won't come out. Well, I bought tubes over a 3 month period with no bad. Urethane is a beast, but won't cure until it's out of the tube. And only the product exposed to air will cure. The inside material won't cure when the outside material is. If the tube is compromised, that should be obvious. So, the likely reasons for the complaint are: tube wasn't heated or a small hole was punched in the metal seal. Don't baby this thing. Bust open as much of the seal as possible. This stuff is thick. And cut a minimum 3/16" hole in the plastic nozzle. Let it flow... let it flow... don't hold it back anymore..2. Heat this product well. This stuff is thickkkk. You absolutely must heat it. Let the heat soak all the way thru. The tube needs to be more than warm. I set 2 pieces of wood on top of an electric fre-standing heater. It's one of those 1500 watt oil filled jobs from hd that looks like an old school steam radiator. I gap the wood 8" apart and put 2 tubes across the gap so that the heat radiates onto them. Then, a folded towel on top to hold the heat in. I let it soak for at least an hour on the low power setting. The tube gets to between warm and hot to the touch. I remove a tube when im ready and use it right away. I put a 16d nail into the nozzle when im done to keep it fresh and put it right back onto the heater. If you don't adequately heat soak the tube, the rest of your experience will be memorable.3. Annie get ur gun. A good one. Not a cheap pos. Don't even think about using that thing hanging in your garage. And if you don't do #1, #2, don't even bother continuing. Not even with a bazooka. I had over 180' of seals to apply. I used the ryobi battery op caulk gun. Worked great. Sure i blew the rivets off the end retainer. After an upgrade with hardened bolts, i was back in business. I also bought a Red Devil pro hd manual calk gun as an emergency backup, here on Bolo. Worked great. Slow.4. Be smart, stay clean, clean oopses now. This stuff is awesome for sticking to everything, long term. If you let little smears and globs go, unchecked, you will find it schmeared everywhere. Everywhere. Just like nutella. Hands, face, hair, ears, nose, glasses, elbows, doorknobs, light switches, carpet, countertops, dogs head.... so, keep the overshoot and globs to a minimum. Clean immediately with mineral spirits. Wear disposable gloves and throw them out. Clean your seal punch. Keep a roll of paper towels handy. Use them liberally, regardless of how you vote. Don't let Fido in the area while you're working.May all your seals and bonds last forever.Cheers.
5.0 out of 5 stars As good as any mame brand.
This stuff is WAY less expensive than the stuff you get at the auto glass or parts stores but it works at least as well. No leaks, spreads easily. Slow drying but a FANTASTIC seal all the way around.
5.0 out of 5 stars The stuff works great, just keep a rag with lacquer thinner. Better yet wear vinyl gloves
Good stuff
4.0 out of 5 stars Good product, not so good shipping/handling.
The product arrived fast, and itself was good. The condition I received it in not so much. Both tubes were just put inside a flimsy Bolo pouch and shipped off and arrived quite banged up.I had to spend about 20 minutes with a pair of pliers unbending the damage to the tube bottoms as well as rolling the tubes continuously to remove the dents just to make them usable in the caulking gun. One tube worked perfectly fine afterwards, the second ended up bursting in the caulking gun from the inside halfway through.
5.0 out of 5 stars Easy to use and worked great
Use latext or rubber gloves. Buy glass handling suction handle. Thick deep bead worked great for me. Push push push the glass into place. Great product unless do not use gloves. If it gets on you it will be everywhere and it is black and stays black for days. Brake fluid was good for removal from hands or carb cleaner.
5.0 out of 5 stars This stuff works great
I tried this for the first time and definitely a novice at installing windshields I tooke mine down to the metal removed all polyurethane and primered the whole pinch weld I used a caulk gun from Homedepot it was around 22usd heavy-duty I put the 2 tubes on the roof for about 2 and a half to 3 hours it worked well came out with very little effort I flattened the plastic tip wit pliers I used 2 tubes exactly on my 1989 Dodge Daytona Shelby it has done its job and no leakes at all anyone can use this stuff its definitely worth it if installing a windshield or quarter panel or rear window.
1.0 out of 5 stars Better have pop eye arms
Adhesive was so hard I could barely get it out. A 5-10 minute job took 3 times as long because of how hard it was to squeeze out. I even changed caulk guns to see if that was the issue. Would not recommend
5.0 out of 5 stars Buen producto
Buena calidad
buena calidad!!
(function() { P.when('cr-A', 'ready').execute(function(A) { if(typeof A.toggleExpanderAriaLabel === 'function') { A.toggleExpanderAriaLabel('review_text_read_more', 'Read more of this review', 'Read less of this review'); } }); })(); .review-text-read-more-expander:focus-visible { outline: 2px solid #2162a1; outline-offset: 2px; border-radius: 5px; } bien protegido y llego antes de tiempo!
Similar suggestions by Bolo
More from this brand
Similar items from “Adhesives”
Share with
Or share with link
https://www.bolo.ae/products/UO073JXQ2P9