Description:
Features:
Cooling Pipe Length: 300 mm
PU Tube Length: 1.5 m
Oil Outlet Port Size: 4 mm
Air Inlet Port Size: 8 mm
Type: Coupling
Check Valve: Yes
Filter: Yes
Product Name: 320mm Fully Sealed Mist Coolant Lubrication Spray System
Features:
- Fully sealed structure design. The air is directly sealed inside the pipe, and will not leak at the contact surface when bent at will, real realize no air leakage.
- No air leakage, stable air suction. Ensure that the machine will not restart frequently due to high gas consumption, save energy and long service life.
- Easy to use. Air flow and spray mist volume adjustable design, easier to use on different processing conditions.
- Can be used to blow away metal fragments, making your work safer; A lot of water problem solving tools, easier to clean up.
- Can be installed on CNC lathes and milling machines to improve processing capacity and cutting speed, Save time, reduce machining cost and tool wear.
- In the liquid without pressure output required to ensure that the air pressure in the range 5-7KGF / CM2 (atomization and gas, associated gas pressure).
- Application to: metal cutting engraving, cooling stone metal ceramic tile engraving machine, CNC lathe milling drill machine, 8mm air pipe.
Common Product Problems：
- Question 1: I find it produces a mist, not a fine spray.
Cause: Too much atomization.
Solution: Turn down your breath, you need to give some air pressure to the liquid at the same time as the gas supply.
- Question 2: Coolant doesn't seem to be sprayed as much.
Cause: Need to pressurize the fluid.
Solution: Turn the gas down a bit, and give the liquid a certain amount of power. Maybe you need a pressure barrel.
- Question 3: The valve is not fully closed. There is some air and some liquid making the mess.
Cause: Water tank to prevent too high.
Solution: The liquid is left in the pipeline, so that it can start faster next time, otherwise it will take a while. You can lower the tank a little bit lower than the sprinkler.
Note:
- Be sure to use filtered clean air source and clean liquid spray to avoid clogging.
- Please predict the location of the sprayer hole first, so that the nozzle is too far away from the cutter.
Material: Aluminum + Copper +Plastic
Air Pressuer: 0.3-1.0 MPa
Liquid Viscosity: 0-88 cst
Input Tube: 150 cm
Output Tube: 30 cm
Product Weight : 180 G / 6.35 Ounces
Product Dimensions (L*W*H) : 180*135*20 MM / 7.09*5.31*0.79 Inches
Package Include:
1 x Mist Coolant Spray System
Reviews:
5.0 out of 5 stars Great little product
I cut and drill 1" X 1" stainless steel bar and have been using Tap Magic EP-EXTRA as a coolant (another great product, by the way!). I used a 12 volt pump I had to create a flood system for my band saw, but it would have been too much for my drill press. After reading all of the positive, helpful reviews this sounded like the right thing. I had an air regulator and gauge from an old compressor and hooked it up in line with this unit and it works great. It allows me not only fine tune the amount of pressure going in, but I can cut off the air flow easily, also. It comes with the syphon hose for the fluid, but not the air hose.You can get the 5/16" tubing at Lowes, but their compression fittings for that size are limited. Because of this, to connect to my regulator I had to start with 1/4" tubing and transition up to 5/16". You can probably find the correct fittings on line, but I kind of like the challenge of figuring out a solution with what you are given.How does it work? Great! Because of the misting, it's hard to gauge exactly how much coolant is actually going down the hole. so periodically i will back off the press and let it lubricate the tip of the bit.The nozzle was getting smacked by the strands coming out of the hole, so I reinforced it as you can see. No magnet? No problem... for me, anyway. Mine will stay in place indefinitely. Excellent product that I highly recommend.
5.0 out of 5 stars Great little mister!
This 20.00 mister works better and is more reliable than the 700.00 misting units that came on our 3 CNC machines. The only problem I’ve had is that the thumb screws for the air and coolant don’t have a stop to keep them from unscrewing but it’s not a big problem.
4.0 out of 5 stars Good for the money
Not the highest quality like KoolMist but not bad and definitely usable on a budget. I'm using mine on a surface grinder and this mister makes all the difference in the surface finish. The coolant and airflow are adjustable but there is definitely a sweet spot where it works the best. Outside of this narrow window, you either get a very spattery dribble of coolant or too much air and virtually no coolant.
5.0 out of 5 stars Product works as described, I prefer a stream of liquid rather than a mist/spray, so I modified it
The media could not be loaded. This product works as described (mist/spray using an air compressor), so 5 stars. Also great value.However, I want to cut aluminum on my CNC and prefer to apply a stream of liquid rather than a mist/spray, so that it shoots a sufficient volume and pressure of liquid to clear the chips in addition to providing cooling.So, I kept the housing of this OriGlam product, and swapped out the hose with this product:Loc-Line 40413 Coolant Hose Assembly Kit, Acetal Copolymer, 7 Piece, 1/4" Coolant Hose IDhttps://www.Bolo.com/dp/B006R9O3HE?ref=ppx_yo2ov_dt_b_product_details&th=1Instead of an air compressor, I'm now using a $10 aquarium pump (up to 80 GPH gallons per hour), to pump water directly into the housing, which squirts a nice solid jet of water.The reason I kept the housing of this OriGlamp product is that it has nice mounting holes, which I will eventually use to mount onto my CNC machine's Z axis so the jet stream can follow along wherever the spindle goes. (In the video, I merely depict squirting the water at an aluminum rod from a fixed mounting point).Keep in mind the jet stream of liquid is messier than the mist/spray, although both can be messy... so I'm working on ways to collect the liquid so it doesn't splatter all over the CNC bed and possibly reach electronics.
5.0 out of 5 stars Absolutely impressive for the price. Ive used worse flood coolers
I bought this to use as a portable coolant dispensor i could swap between the lathe, mill, and drill press in my little garage shop. This thing is really impressive. Getting all the hose fitting to conect to my little pancake compressor took a trip to the hardware store. I mounted it to a magnetic base i had laying around, so i can attach/deattach it and move it around the shop farile easily. It has 2 holes for mounting on the front corners, which isnt the best (takes long thin screws which meant i needed a wonky bracket to attach the magnet), but is workablePOINT IS this thing absolutely revolutionized making parts in my little shop. Get a good coolant and watch stainless turn to butter. It is rather incredibly efficient. Ive been using it for a couple hours a day for several weeks and ive just gone through my first gallon. I mostly work in foodsafe plastics and stainless, this has eliminated nearly every issue i had with tools overheating or cutting badly. WIsh i had bought it sooner
5.0 out of 5 stars As good as the pricy mister at a much more reasonable price.
My first mister was the Kool Mist brand mister, but I needed another one. I ordered a $15 one from eBay from China...it was the worst piece of crap I'd ever spent money on. It leaked everywhere. So I decided to look elsewhere and found this one, and boy, for less than $25, this thing is impressive. It's very well made, with 2 needle valves, it doesn't leak and works even better than my $80 Kool Mist. The only draw back is that it doesn't have a magnet, I had to mount it on a magnet that I had here. Not a big deal. The Kool Mist magnet is not strong enough anyway, so I was more than happy to put a strong neodymium magnet on this one. Great buy.
5.0 out of 5 stars Excellent for the price! Works well, very adjustable.
This is very nice, especially for the price! Extremely adjustable for both fluid and air flow. Work well at just 5psi. I tend to run it around 20 psi with great results.A few notes:* The description says 8mm air hose, but standard 5/16 O.D. Hose from the big box stores also fits perfect and is cheaper than 8mm hose online.* Non magnetic, but there are two mounting holes drilled through for attachment. You will need to fabricate a holder.* If you mount your reservoir above the nozzle you will have a siphon situation and your fluid will keep draining.* Make sure you tighten the lock nuts on the adjustment screws fairly tight our they will vibrate loose. The adjustment screws themselves will then vibrate open or closed as well.
3.0 out of 5 stars No flow control.
Worked well initially but later coolant control screw failed. The screw cap fell off too.
Very Cool Man
I previously bought the cheaper one control mist coolers and struggled to get the coolant flow and air feed running properly.My mate bought one of these by mistake and asked me to help him set it up on his myford lathe.This model is so staggeringly better than the others around that I immediately ordered two for myself.Slightly dearer than some but night and day improvement.The cheaper ones only have one control screw that just doesn't work, in fact I had to pipe in a seperate tap to control the air properly, and they were still a fudge.These OriGlam ones have two controls, air and fluid, plus a non return valve in the fluid line that takes all the 'bounce' out of the line so the syphon effect works reliably. The air pressure needed is greatly reduced compared to the 'one control' types as well.I tapped one of the mounting holes with a 4mm thread and mounted 'silverline magnets' also available on Bolo. Now I can just clip them to any machine I am working at. Fantastic.Easy to plumb in with 8mm blue plastic pipe. Just push the pipe into the self sealing fittings. A slight push on the blue collars and the pipes can be easily removed to make packing away a doodle.
tres bien
fonctionne comme desiré
Luft und Kühlmittel separat zu dosieren
Hatte länger überlegt, wie ich meine Bandsäge kühlen soll. Dann habe ich dieses Set gefunden. Was mir gut daran gefällt, ich brauche keine Unmengen an Kühlmittel, sondern sprühe eher einen Öl-Nebel (Ich verwende Hydrauliköl zum Kühlen) auf das Band und kann durch die beiden Regler wunderbar die Menge Luft und Öl separat regulieren. Das funktioniert jetzt schon seit längerem so gut, dass ich das Set von der Säge abgenommen habe und auch mal an meiner Standbohrmaschine ausprobiert habe. 14er Löcher in Edelstahl. Funktioniert dermaßen prima, dass ich mir jetzt gerade das zweite Set bestellt habe und eines fest an die Tischbohrmaschine und eines an der Bandsäge angebracht habe. Mit Gewindebohrer zwei Stehbolzen gesetzt und das Teil hält, griffgünstig, wie es soll. Ich bin sehr zufrieden.
FANTASTICO, SOLIDO E REGOLAZIONI FINI
Regolazioni aria/liquido molto fini che mi consentono di fare un getto nebulizzato molto fine senza fare pozzanghere di acqua durante le lavorazioni dell'alluminio sulla mi CNC6040, molto soddisfatto del prodotto anche la realizzazione è molto robusta e solida
Could not get it to work well
It's kinda fiddly to get it to spray fluid. When it finally managed to produce droplets, the air flow was minimal. I need good air flow + fluid. But now I only use it for air.
Visit the OriGlam Store
OriGlam Mist Coolant Lubrication Spray System for Metal Cutting Engraving Cooling Sprayer Machine for Air Pipe CNC Lathe Milling Drill
AED11401
Quantity:
Order today to get by 7-14 business days
Delivery fee of AED 20. Free for orders above AED 200.
Imported From: United States
At BOLO, we work hard to ensure the products you receive are new, genuine, and sourced from reputable suppliers.
BOLO is not an authorized or official retailer for most brands, nor are we affiliated with manufacturers unless specifically stated on a product page. Instead, we source verified sellers, authorized distributors or directly from the manufacturer.
Each product undergoes thorough inspection and verification at our consolidation and fulfilment centers to ensure it meets our strict authenticity and quality standards before being shipped and delivered to you.
If you ever have concerns regarding the authenticity of a product purchased from us, please contact Bolo Support. We will review your inquiry promptly and, if necessary, provide documentation verifying authenticity or offer a suitable resolution.
Your trust is our top priority, and we are committed to maintaining transparency and integrity in every transaction.
All product information, images, descriptions, and reviews originate from the manufacturer or from trusted sellers overseas. BOLO is not affiliated with, endorsed by, or an authorized retailer for most brands listed on our website unless stated otherwise.
While we strive to display accurate information, variations in packaging, labeling, instructions, or formulation may occasionally occur due to regional differences or supplier updates. For detailed or manufacturer-specific information, please contact the brand directly or reach out to BOLO Support for assistance.
Unless otherwise stated, all prices displayed on the product page include applicable taxes and import duties.
BOLO operates in accordance with the laws and regulations of United Arab Emirates. Any items found to be restricted or prohibited for sale within the UAE will be cancelled prior to shipment. We take proactive measures to ensure that only products permitted for sale in United Arab Emirates are listed on our website.
All items are shipped by air, and any products classified as “Dangerous Goods (DG)” under IATA regulations will be removed from the order and cancelled.
All orders are processed manually, and we make every effort to process them promptly once confirmed. Products cancelled due to the above reasons will be permanently removed from listings across the website.
Similar suggestions by Bolo
More from this brand
Similar items from “Milling Machines”
Share with
Or share with link
https://www.bolo.ae/products/UO071QKTTC4
Visit the OriGlam Store
OriGlam Mist Coolant Lubrication Spray System for Metal Cutting Engraving Cooling Sprayer Machine for Air Pipe CNC Lathe Milling Drill
AED11401
Quantity:
Order today to get by 7-14 business days
Delivery fee of AED 20. Free for orders above AED 200.
Imported From: United States
At BOLO, we work hard to ensure the products you receive are new, genuine, and sourced from reputable suppliers.
BOLO is not an authorized or official retailer for most brands, nor are we affiliated with manufacturers unless specifically stated on a product page. Instead, we source verified sellers, authorized distributors or directly from the manufacturer.
Each product undergoes thorough inspection and verification at our consolidation and fulfilment centers to ensure it meets our strict authenticity and quality standards before being shipped and delivered to you.
If you ever have concerns regarding the authenticity of a product purchased from us, please contact Bolo Support. We will review your inquiry promptly and, if necessary, provide documentation verifying authenticity or offer a suitable resolution.
Your trust is our top priority, and we are committed to maintaining transparency and integrity in every transaction.
All product information, images, descriptions, and reviews originate from the manufacturer or from trusted sellers overseas. BOLO is not affiliated with, endorsed by, or an authorized retailer for most brands listed on our website unless stated otherwise.
While we strive to display accurate information, variations in packaging, labeling, instructions, or formulation may occasionally occur due to regional differences or supplier updates. For detailed or manufacturer-specific information, please contact the brand directly or reach out to BOLO Support for assistance.
Unless otherwise stated, all prices displayed on the product page include applicable taxes and import duties.
BOLO operates in accordance with the laws and regulations of United Arab Emirates. Any items found to be restricted or prohibited for sale within the UAE will be cancelled prior to shipment. We take proactive measures to ensure that only products permitted for sale in United Arab Emirates are listed on our website.
All items are shipped by air, and any products classified as “Dangerous Goods (DG)” under IATA regulations will be removed from the order and cancelled.
All orders are processed manually, and we make every effort to process them promptly once confirmed. Products cancelled due to the above reasons will be permanently removed from listings across the website.
Description:
Features:
Cooling Pipe Length: 300 mm
PU Tube Length: 1.5 m
Oil Outlet Port Size: 4 mm
Air Inlet Port Size: 8 mm
Type: Coupling
Check Valve: Yes
Filter: Yes
Product Name: 320mm Fully Sealed Mist Coolant Lubrication Spray System
Features:
- Fully sealed structure design. The air is directly sealed inside the pipe, and will not leak at the contact surface when bent at will, real realize no air leakage.
- No air leakage, stable air suction. Ensure that the machine will not restart frequently due to high gas consumption, save energy and long service life.
- Easy to use. Air flow and spray mist volume adjustable design, easier to use on different processing conditions.
- Can be used to blow away metal fragments, making your work safer; A lot of water problem solving tools, easier to clean up.
- Can be installed on CNC lathes and milling machines to improve processing capacity and cutting speed, Save time, reduce machining cost and tool wear.
- In the liquid without pressure output required to ensure that the air pressure in the range 5-7KGF / CM2 (atomization and gas, associated gas pressure).
- Application to: metal cutting engraving, cooling stone metal ceramic tile engraving machine, CNC lathe milling drill machine, 8mm air pipe.
Common Product Problems：
- Question 1: I find it produces a mist, not a fine spray.
Cause: Too much atomization.
Solution: Turn down your breath, you need to give some air pressure to the liquid at the same time as the gas supply.
- Question 2: Coolant doesn't seem to be sprayed as much.
Cause: Need to pressurize the fluid.
Solution: Turn the gas down a bit, and give the liquid a certain amount of power. Maybe you need a pressure barrel.
- Question 3: The valve is not fully closed. There is some air and some liquid making the mess.
Cause: Water tank to prevent too high.
Solution: The liquid is left in the pipeline, so that it can start faster next time, otherwise it will take a while. You can lower the tank a little bit lower than the sprinkler.
Note:
- Be sure to use filtered clean air source and clean liquid spray to avoid clogging.
- Please predict the location of the sprayer hole first, so that the nozzle is too far away from the cutter.
Material: Aluminum + Copper +Plastic
Air Pressuer: 0.3-1.0 MPa
Liquid Viscosity: 0-88 cst
Input Tube: 150 cm
Output Tube: 30 cm
Product Weight : 180 G / 6.35 Ounces
Product Dimensions (L*W*H) : 180*135*20 MM / 7.09*5.31*0.79 Inches
Package Include:
1 x Mist Coolant Spray System
Reviews:
5.0 out of 5 stars Great little product
I cut and drill 1" X 1" stainless steel bar and have been using Tap Magic EP-EXTRA as a coolant (another great product, by the way!). I used a 12 volt pump I had to create a flood system for my band saw, but it would have been too much for my drill press. After reading all of the positive, helpful reviews this sounded like the right thing. I had an air regulator and gauge from an old compressor and hooked it up in line with this unit and it works great. It allows me not only fine tune the amount of pressure going in, but I can cut off the air flow easily, also. It comes with the syphon hose for the fluid, but not the air hose.You can get the 5/16" tubing at Lowes, but their compression fittings for that size are limited. Because of this, to connect to my regulator I had to start with 1/4" tubing and transition up to 5/16". You can probably find the correct fittings on line, but I kind of like the challenge of figuring out a solution with what you are given.How does it work? Great! Because of the misting, it's hard to gauge exactly how much coolant is actually going down the hole. so periodically i will back off the press and let it lubricate the tip of the bit.The nozzle was getting smacked by the strands coming out of the hole, so I reinforced it as you can see. No magnet? No problem... for me, anyway. Mine will stay in place indefinitely. Excellent product that I highly recommend.
5.0 out of 5 stars Great little mister!
This 20.00 mister works better and is more reliable than the 700.00 misting units that came on our 3 CNC machines. The only problem I’ve had is that the thumb screws for the air and coolant don’t have a stop to keep them from unscrewing but it’s not a big problem.
4.0 out of 5 stars Good for the money
Not the highest quality like KoolMist but not bad and definitely usable on a budget. I'm using mine on a surface grinder and this mister makes all the difference in the surface finish. The coolant and airflow are adjustable but there is definitely a sweet spot where it works the best. Outside of this narrow window, you either get a very spattery dribble of coolant or too much air and virtually no coolant.
5.0 out of 5 stars Product works as described, I prefer a stream of liquid rather than a mist/spray, so I modified it
The media could not be loaded. This product works as described (mist/spray using an air compressor), so 5 stars. Also great value.However, I want to cut aluminum on my CNC and prefer to apply a stream of liquid rather than a mist/spray, so that it shoots a sufficient volume and pressure of liquid to clear the chips in addition to providing cooling.So, I kept the housing of this OriGlam product, and swapped out the hose with this product:Loc-Line 40413 Coolant Hose Assembly Kit, Acetal Copolymer, 7 Piece, 1/4" Coolant Hose IDhttps://www.Bolo.com/dp/B006R9O3HE?ref=ppx_yo2ov_dt_b_product_details&th=1Instead of an air compressor, I'm now using a $10 aquarium pump (up to 80 GPH gallons per hour), to pump water directly into the housing, which squirts a nice solid jet of water.The reason I kept the housing of this OriGlamp product is that it has nice mounting holes, which I will eventually use to mount onto my CNC machine's Z axis so the jet stream can follow along wherever the spindle goes. (In the video, I merely depict squirting the water at an aluminum rod from a fixed mounting point).Keep in mind the jet stream of liquid is messier than the mist/spray, although both can be messy... so I'm working on ways to collect the liquid so it doesn't splatter all over the CNC bed and possibly reach electronics.
5.0 out of 5 stars Absolutely impressive for the price. Ive used worse flood coolers
I bought this to use as a portable coolant dispensor i could swap between the lathe, mill, and drill press in my little garage shop. This thing is really impressive. Getting all the hose fitting to conect to my little pancake compressor took a trip to the hardware store. I mounted it to a magnetic base i had laying around, so i can attach/deattach it and move it around the shop farile easily. It has 2 holes for mounting on the front corners, which isnt the best (takes long thin screws which meant i needed a wonky bracket to attach the magnet), but is workablePOINT IS this thing absolutely revolutionized making parts in my little shop. Get a good coolant and watch stainless turn to butter. It is rather incredibly efficient. Ive been using it for a couple hours a day for several weeks and ive just gone through my first gallon. I mostly work in foodsafe plastics and stainless, this has eliminated nearly every issue i had with tools overheating or cutting badly. WIsh i had bought it sooner
5.0 out of 5 stars As good as the pricy mister at a much more reasonable price.
My first mister was the Kool Mist brand mister, but I needed another one. I ordered a $15 one from eBay from China...it was the worst piece of crap I'd ever spent money on. It leaked everywhere. So I decided to look elsewhere and found this one, and boy, for less than $25, this thing is impressive. It's very well made, with 2 needle valves, it doesn't leak and works even better than my $80 Kool Mist. The only draw back is that it doesn't have a magnet, I had to mount it on a magnet that I had here. Not a big deal. The Kool Mist magnet is not strong enough anyway, so I was more than happy to put a strong neodymium magnet on this one. Great buy.
5.0 out of 5 stars Excellent for the price! Works well, very adjustable.
This is very nice, especially for the price! Extremely adjustable for both fluid and air flow. Work well at just 5psi. I tend to run it around 20 psi with great results.A few notes:* The description says 8mm air hose, but standard 5/16 O.D. Hose from the big box stores also fits perfect and is cheaper than 8mm hose online.* Non magnetic, but there are two mounting holes drilled through for attachment. You will need to fabricate a holder.* If you mount your reservoir above the nozzle you will have a siphon situation and your fluid will keep draining.* Make sure you tighten the lock nuts on the adjustment screws fairly tight our they will vibrate loose. The adjustment screws themselves will then vibrate open or closed as well.
3.0 out of 5 stars No flow control.
Worked well initially but later coolant control screw failed. The screw cap fell off too.
Very Cool Man
I previously bought the cheaper one control mist coolers and struggled to get the coolant flow and air feed running properly.My mate bought one of these by mistake and asked me to help him set it up on his myford lathe.This model is so staggeringly better than the others around that I immediately ordered two for myself.Slightly dearer than some but night and day improvement.The cheaper ones only have one control screw that just doesn't work, in fact I had to pipe in a seperate tap to control the air properly, and they were still a fudge.These OriGlam ones have two controls, air and fluid, plus a non return valve in the fluid line that takes all the 'bounce' out of the line so the syphon effect works reliably. The air pressure needed is greatly reduced compared to the 'one control' types as well.I tapped one of the mounting holes with a 4mm thread and mounted 'silverline magnets' also available on Bolo. Now I can just clip them to any machine I am working at. Fantastic.Easy to plumb in with 8mm blue plastic pipe. Just push the pipe into the self sealing fittings. A slight push on the blue collars and the pipes can be easily removed to make packing away a doodle.
tres bien
fonctionne comme desiré
Luft und Kühlmittel separat zu dosieren
Hatte länger überlegt, wie ich meine Bandsäge kühlen soll. Dann habe ich dieses Set gefunden. Was mir gut daran gefällt, ich brauche keine Unmengen an Kühlmittel, sondern sprühe eher einen Öl-Nebel (Ich verwende Hydrauliköl zum Kühlen) auf das Band und kann durch die beiden Regler wunderbar die Menge Luft und Öl separat regulieren. Das funktioniert jetzt schon seit längerem so gut, dass ich das Set von der Säge abgenommen habe und auch mal an meiner Standbohrmaschine ausprobiert habe. 14er Löcher in Edelstahl. Funktioniert dermaßen prima, dass ich mir jetzt gerade das zweite Set bestellt habe und eines fest an die Tischbohrmaschine und eines an der Bandsäge angebracht habe. Mit Gewindebohrer zwei Stehbolzen gesetzt und das Teil hält, griffgünstig, wie es soll. Ich bin sehr zufrieden.
FANTASTICO, SOLIDO E REGOLAZIONI FINI
Regolazioni aria/liquido molto fini che mi consentono di fare un getto nebulizzato molto fine senza fare pozzanghere di acqua durante le lavorazioni dell'alluminio sulla mi CNC6040, molto soddisfatto del prodotto anche la realizzazione è molto robusta e solida
Could not get it to work well
It's kinda fiddly to get it to spray fluid. When it finally managed to produce droplets, the air flow was minimal. I need good air flow + fluid. But now I only use it for air.
Similar suggestions by Bolo
More from this brand
Similar items from “Milling Machines”
Share with
Or share with link
https://www.bolo.ae/products/UO071QKTTC4