Description:
Milling Working Cross Table Machine
Reviews:
5.0 out of 5 stars 5 out of 5 stars Value priced, meets or exceeds description, works as advertised and is a value.
I purchase several things on Bolo and was giving pretty in-depth reviews. From this point on, here's the new agenda…. if it works as advertised, is well made, meets or exceeds the description, is a value, and arrives in a fair amount of time, it will get a "star rating" equal to what my expectations were/are. If it doesn't meet these criteria, then I will most definitely and descriptively tell the short comings of the products and you as a consumer will not have to go through the trouble of buying the product without some background knowledge. If the sell pulls that item and relists under another description, I will put the exact same review on the seller's feedback page. Sellers have done this a couple of times in the past, and I was true to my word then as well as now. DR
3.0 out of 5 stars Suggest putting in a little elbow grease
It’s a good budget tool. I read the reviews and agree with them. They have it painted in areas that should be polished. Areas that should be a smooth polished surface are a little rough. Without adding anything to it, just cleaning it up, polishing contacting surfaces, and hitting the threads with a wire wheel on a dremel. It’s a decent tool. I do suggest oiling it and taking time to clean it up some. You could use it right out the gate if you wanted to but the fit and finish will be sufficient better with some elbow grease. I added two pictures just to show some areas I noticed had paint that I thought it shouldn’t be. The paint was causing some areas to kind of bind up a little bit. All in all I’m pretty happy with it
4.0 out of 5 stars Sturdy
The bad is it has rough edges in the assembly parts and does not fit standard TEE nut. I like that it is sturdy, the cross nut thread is tight on traverse rod threads. I feel that is very important. It can be squared up during a set up. The working surface looks great. I purchased for drill press center alignment and can already see it will work great for that. Plan to mount a small drill vise to the top and will have the TEE slot table below if needed. Also plan to shim up the race for a little more clearance in the dial. I recommend this as it was the only one I could find in this form for any price. On mine 1 revolution dial turn is around 2mm although the dial is segmented 0 to 4. Fit perfect on a Central Macinery 12 speed, 10 inch benchtop drill table.
5.0 out of 5 stars Better than expected
I read the reviews on this and kinda excited the worst, I could see it was completely fixable. Got mine took it all apart and really nothing was wrong I polished it up a bit put a shim on 1 of the bearings and adjusted everything as tightly as possible set it up. Works really well only tried couple small things. I do wish it was a little bigger.
2.0 out of 5 stars It needs shims for the thrust washers
I guess for the price this is ok, but it is not usable out of the box. First, there are NO/NO instructions. I really don 't need them, but the biggest problem I had was when I tightened the nut on the shaft it locked up. I assumed it was metal on metal and that was the design. To my surprise when I took it apart it had thrust bearings where they should be! Which means I could snug up the nut and be good. But.... when I snugged up the nut it locked up. Because they failed to install any shims under the thrust washer. So I did that and it works ok now. It's not a precise thing, so don't get your hopes up. So to give this a better rating they need to machine the surface that the thrust bearings seat and use shims so that the bearing is not just a decoration. Also, the cheap luck nut they used needs more surface area. As is, the nylon doesn't do anything and the surface area is so small the knob rocks on the shaft. All in all for a copy of a real vise they get a 2/5. If they had any clue what they were doing this would get a 4.
3.0 out of 5 stars Play in table
This table moves when milling no matter how tight you make the jobs. I locked it down and it still had play in it
5.0 out of 5 stars Works fine, esp for this price. Requires some prep work after receiving.
If you want a simple work table to use, especially for your drill press, this is a great table to consider and purchase. I found it to be accurate enough for what I am going to do with it. Is this something to use a professional machine shop and for cranking out a ton of parts? No -- but that should be apparent by the price point.The table requires some prep work once it arrives. This is what I did:1) Unwrapped and sprayed it down with brake cleaner to get all the nasty oil/grease off2) Disassembled the entire unit and sprayed it down again3) Took a wire brush to all the channels and guide areas to remove excess paint4) Sanded down the top deck to make sure it was truly flat5) Filed down all the spacers in the channel guides to remove any burrs6) Took a dremel with a sanding drum and knocked down all the edges7) Reassembled and greased the guides
4.0 out of 5 stars A good little table if you’re willing to invest some time
Like the other reviews mention, do not expect this table to come in a ready-to-use state.Fortunately it is very easily disassembled. You’ll want to perform the following steps:1. Remove any blue paint from the ways (and trust me, there will be paint)2. Drill two additional indentations into the gibs to line up with the gib screws - this prevents the gibs from rotating in the dovetail and reducing contact area (and thus rigidity.3. Oil everything with a light machine oil.4. Double check all 4 pairs of thrust bearings are installed correctly (one of mine came with the rolling element on the outside instead of sandwiched between the races) and lightly grease them (they will be completely ungreased).5. Carefully reassemble the table and take your time adjusting the gib screws. You want them just snug but no more no less. The axes should slide fairly easily but without noticeable deflection if you try to twist that axes forcefully. Really tighten down the nuts once adjusted or vibration will undo your careful adjustments.6. Also carefully tighten the two lock nuts holding the control wheels on. Get them so tight that you cannot turn the wheel at all, then back off 1/8th of a turn. The wheel should spin easily but if you did it right, there will be almost no backlash.After doing this, it’s really a great little table. But there is going to be at least an hour’s work of cleaning and lubing and adjustment standing between what you’ll get in the box and what you actually wanted.
Ok
Ok
This product is sub standard !
One of the sliding dovetails binds up while the other is smooth complaining to the seller does no good have asked for a refund, I am a toolmaker and have spent many hours trying to fix and is still not right only just functioning.
mittel schwere Katastrophe mit Erfolgsaussichten
Gefallen hat mir das Aussehen. Ich wusste schon durch Recherchen auf was ich mich da einlasse.Der Arbeitstisch ist vom Guss her ok, entgraten müsst Ihr in teilweise selber. Die Nuten auf dem Arbeitstisch, müssen wenn man es genau haben will, über die Länge nachgefräst werden 1,2 mm Toleranz. Die Mitnehmer an den Gewindespindeln welche den X und Y Tisch bewegen, sind nur reingesteckt, sie wurden von mir mit Gewindebohrung ausgestattet und mit Schrauben befestigt. Die einstellbaren Messräder sind mit kleinen Klebebandwürstchen arretiert, das macht ein genaues einstellen unmöglich. In die 2 Handkurbeln habe ich deswegen eine Rille von 5mm gedreht um dort einen Filz Ring einzufügen, danach die Messräder aufgesteckt und von hinten mit 3 Senkkopfschrauben arretiert. Die Axialen Rillenrollenlager an beiden Handkurbeln sind nicht mittig, liegen lose in den Handkurbeln, dadurch ist ein gleichmäßiger Lauf der X und Y Bewegung ausgeschlossen. Dort wurden sie durch 2 angepasste Hülsen zentriert. Diese Arbeiten haben ca. 8 Stunden gedauert, es wird dafür eine Drehmaschine benötigt. Danach hat man einen sehr stabilen Arbeitstisch.
Un véritable outil
Vu le prix j'ai u tres peur en l'achetant ...A la réception du colis ,la qualité de l'emballage et de sont poids ,cela ma rassuréAu déballage alors la je suis surpris par la qualité du produit (l'usinage est parfait incroyable vu le prix)Je ne l'ai meme pas démonté pour le nettoyer ou retirer la peinture ,rien , je n'ai strictement rien fais, juste un peut graisser avec une bombe de graisse sous pression et réglé.Il faut impérativement le régler, car les vis de réglage ne sont pas serrées .Et la stupéfaction ,aucun point dur, aucune résistance qui pourrait jouer sur le bon fonctionnement .Conclusion ont a dans les mains UN TRES BON PRODUIT, un véritable outil pour le prix d'une breloque .Donc si vous devez en acheter une, achetez cette table a mouvement croisé.Cordialement
It's ok for the price.
I like it ,by taking some time to take it apart and file some sharp edges, put some lithium grease on the guides, it's ok for the price.I use it on a small drill to mill small jobs like brass, alluminium,copper and teflon materials.
Visit the Mophorn Store
Vevor Milling Machine Work Table Slide Milling Working Cross Table Machine Compound Slide Milling TablePrecision Milling Cross Worktable (7.3 x 4 Inch) - Amazon.com
AED80749
Quantity:
Order today to get by 7-14 business days
This item qualifies for free delivery
Imported From: United States
At BOLO, we work hard to ensure the products you receive are new, genuine, and sourced from reputable suppliers.
BOLO is not an authorized or official retailer for most brands, nor are we affiliated with manufacturers unless specifically stated on a product page. Instead, we source verified sellers, authorized distributors or directly from the manufacturer.
Each product undergoes thorough inspection and verification at our consolidation and fulfilment centers to ensure it meets our strict authenticity and quality standards before being shipped and delivered to you.
If you ever have concerns regarding the authenticity of a product purchased from us, please contact Bolo Support. We will review your inquiry promptly and, if necessary, provide documentation verifying authenticity or offer a suitable resolution.
Your trust is our top priority, and we are committed to maintaining transparency and integrity in every transaction.
All product information, images, descriptions, and reviews originate from the manufacturer or from trusted sellers overseas. BOLO is not affiliated with, endorsed by, or an authorized retailer for most brands listed on our website unless stated otherwise.
While we strive to display accurate information, variations in packaging, labeling, instructions, or formulation may occasionally occur due to regional differences or supplier updates. For detailed or manufacturer-specific information, please contact the brand directly or reach out to BOLO Support for assistance.
Unless otherwise stated, all prices displayed on the product page include applicable taxes and import duties.
BOLO operates in accordance with the laws and regulations of United Arab Emirates. Any items found to be restricted or prohibited for sale within the UAE will be cancelled prior to shipment. We take proactive measures to ensure that only products permitted for sale in United Arab Emirates are listed on our website.
All items are shipped by air, and any products classified as “Dangerous Goods (DG)” under IATA regulations will be removed from the order and cancelled.
All orders are processed manually, and we make every effort to process them promptly once confirmed. Products cancelled due to the above reasons will be permanently removed from listings across the website.
Similar suggestions by Bolo
More from this brand
Similar items from “Workbenches”
Share with
Or share with link
https://www.bolo.ae/products/UO07114E45U
Visit the Mophorn Store
Vevor Milling Machine Work Table Slide Milling Working Cross Table Machine Compound Slide Milling TablePrecision Milling Cross Worktable (7.3 x 4 Inch) - Amazon.com
AED80749
Quantity:
Order today to get by 7-14 business days
This item qualifies for free delivery
Imported From: United States
At BOLO, we work hard to ensure the products you receive are new, genuine, and sourced from reputable suppliers.
BOLO is not an authorized or official retailer for most brands, nor are we affiliated with manufacturers unless specifically stated on a product page. Instead, we source verified sellers, authorized distributors or directly from the manufacturer.
Each product undergoes thorough inspection and verification at our consolidation and fulfilment centers to ensure it meets our strict authenticity and quality standards before being shipped and delivered to you.
If you ever have concerns regarding the authenticity of a product purchased from us, please contact Bolo Support. We will review your inquiry promptly and, if necessary, provide documentation verifying authenticity or offer a suitable resolution.
Your trust is our top priority, and we are committed to maintaining transparency and integrity in every transaction.
All product information, images, descriptions, and reviews originate from the manufacturer or from trusted sellers overseas. BOLO is not affiliated with, endorsed by, or an authorized retailer for most brands listed on our website unless stated otherwise.
While we strive to display accurate information, variations in packaging, labeling, instructions, or formulation may occasionally occur due to regional differences or supplier updates. For detailed or manufacturer-specific information, please contact the brand directly or reach out to BOLO Support for assistance.
Unless otherwise stated, all prices displayed on the product page include applicable taxes and import duties.
BOLO operates in accordance with the laws and regulations of United Arab Emirates. Any items found to be restricted or prohibited for sale within the UAE will be cancelled prior to shipment. We take proactive measures to ensure that only products permitted for sale in United Arab Emirates are listed on our website.
All items are shipped by air, and any products classified as “Dangerous Goods (DG)” under IATA regulations will be removed from the order and cancelled.
All orders are processed manually, and we make every effort to process them promptly once confirmed. Products cancelled due to the above reasons will be permanently removed from listings across the website.
Description:
Milling Working Cross Table Machine
Reviews:
5.0 out of 5 stars 5 out of 5 stars Value priced, meets or exceeds description, works as advertised and is a value.
I purchase several things on Bolo and was giving pretty in-depth reviews. From this point on, here's the new agenda…. if it works as advertised, is well made, meets or exceeds the description, is a value, and arrives in a fair amount of time, it will get a "star rating" equal to what my expectations were/are. If it doesn't meet these criteria, then I will most definitely and descriptively tell the short comings of the products and you as a consumer will not have to go through the trouble of buying the product without some background knowledge. If the sell pulls that item and relists under another description, I will put the exact same review on the seller's feedback page. Sellers have done this a couple of times in the past, and I was true to my word then as well as now. DR
3.0 out of 5 stars Suggest putting in a little elbow grease
It’s a good budget tool. I read the reviews and agree with them. They have it painted in areas that should be polished. Areas that should be a smooth polished surface are a little rough. Without adding anything to it, just cleaning it up, polishing contacting surfaces, and hitting the threads with a wire wheel on a dremel. It’s a decent tool. I do suggest oiling it and taking time to clean it up some. You could use it right out the gate if you wanted to but the fit and finish will be sufficient better with some elbow grease. I added two pictures just to show some areas I noticed had paint that I thought it shouldn’t be. The paint was causing some areas to kind of bind up a little bit. All in all I’m pretty happy with it
4.0 out of 5 stars Sturdy
The bad is it has rough edges in the assembly parts and does not fit standard TEE nut. I like that it is sturdy, the cross nut thread is tight on traverse rod threads. I feel that is very important. It can be squared up during a set up. The working surface looks great. I purchased for drill press center alignment and can already see it will work great for that. Plan to mount a small drill vise to the top and will have the TEE slot table below if needed. Also plan to shim up the race for a little more clearance in the dial. I recommend this as it was the only one I could find in this form for any price. On mine 1 revolution dial turn is around 2mm although the dial is segmented 0 to 4. Fit perfect on a Central Macinery 12 speed, 10 inch benchtop drill table.
5.0 out of 5 stars Better than expected
I read the reviews on this and kinda excited the worst, I could see it was completely fixable. Got mine took it all apart and really nothing was wrong I polished it up a bit put a shim on 1 of the bearings and adjusted everything as tightly as possible set it up. Works really well only tried couple small things. I do wish it was a little bigger.
2.0 out of 5 stars It needs shims for the thrust washers
I guess for the price this is ok, but it is not usable out of the box. First, there are NO/NO instructions. I really don 't need them, but the biggest problem I had was when I tightened the nut on the shaft it locked up. I assumed it was metal on metal and that was the design. To my surprise when I took it apart it had thrust bearings where they should be! Which means I could snug up the nut and be good. But.... when I snugged up the nut it locked up. Because they failed to install any shims under the thrust washer. So I did that and it works ok now. It's not a precise thing, so don't get your hopes up. So to give this a better rating they need to machine the surface that the thrust bearings seat and use shims so that the bearing is not just a decoration. Also, the cheap luck nut they used needs more surface area. As is, the nylon doesn't do anything and the surface area is so small the knob rocks on the shaft. All in all for a copy of a real vise they get a 2/5. If they had any clue what they were doing this would get a 4.
3.0 out of 5 stars Play in table
This table moves when milling no matter how tight you make the jobs. I locked it down and it still had play in it
5.0 out of 5 stars Works fine, esp for this price. Requires some prep work after receiving.
If you want a simple work table to use, especially for your drill press, this is a great table to consider and purchase. I found it to be accurate enough for what I am going to do with it. Is this something to use a professional machine shop and for cranking out a ton of parts? No -- but that should be apparent by the price point.The table requires some prep work once it arrives. This is what I did:1) Unwrapped and sprayed it down with brake cleaner to get all the nasty oil/grease off2) Disassembled the entire unit and sprayed it down again3) Took a wire brush to all the channels and guide areas to remove excess paint4) Sanded down the top deck to make sure it was truly flat5) Filed down all the spacers in the channel guides to remove any burrs6) Took a dremel with a sanding drum and knocked down all the edges7) Reassembled and greased the guides
4.0 out of 5 stars A good little table if you’re willing to invest some time
Like the other reviews mention, do not expect this table to come in a ready-to-use state.Fortunately it is very easily disassembled. You’ll want to perform the following steps:1. Remove any blue paint from the ways (and trust me, there will be paint)2. Drill two additional indentations into the gibs to line up with the gib screws - this prevents the gibs from rotating in the dovetail and reducing contact area (and thus rigidity.3. Oil everything with a light machine oil.4. Double check all 4 pairs of thrust bearings are installed correctly (one of mine came with the rolling element on the outside instead of sandwiched between the races) and lightly grease them (they will be completely ungreased).5. Carefully reassemble the table and take your time adjusting the gib screws. You want them just snug but no more no less. The axes should slide fairly easily but without noticeable deflection if you try to twist that axes forcefully. Really tighten down the nuts once adjusted or vibration will undo your careful adjustments.6. Also carefully tighten the two lock nuts holding the control wheels on. Get them so tight that you cannot turn the wheel at all, then back off 1/8th of a turn. The wheel should spin easily but if you did it right, there will be almost no backlash.After doing this, it’s really a great little table. But there is going to be at least an hour’s work of cleaning and lubing and adjustment standing between what you’ll get in the box and what you actually wanted.
Ok
Ok
This product is sub standard !
One of the sliding dovetails binds up while the other is smooth complaining to the seller does no good have asked for a refund, I am a toolmaker and have spent many hours trying to fix and is still not right only just functioning.
mittel schwere Katastrophe mit Erfolgsaussichten
Gefallen hat mir das Aussehen. Ich wusste schon durch Recherchen auf was ich mich da einlasse.Der Arbeitstisch ist vom Guss her ok, entgraten müsst Ihr in teilweise selber. Die Nuten auf dem Arbeitstisch, müssen wenn man es genau haben will, über die Länge nachgefräst werden 1,2 mm Toleranz. Die Mitnehmer an den Gewindespindeln welche den X und Y Tisch bewegen, sind nur reingesteckt, sie wurden von mir mit Gewindebohrung ausgestattet und mit Schrauben befestigt. Die einstellbaren Messräder sind mit kleinen Klebebandwürstchen arretiert, das macht ein genaues einstellen unmöglich. In die 2 Handkurbeln habe ich deswegen eine Rille von 5mm gedreht um dort einen Filz Ring einzufügen, danach die Messräder aufgesteckt und von hinten mit 3 Senkkopfschrauben arretiert. Die Axialen Rillenrollenlager an beiden Handkurbeln sind nicht mittig, liegen lose in den Handkurbeln, dadurch ist ein gleichmäßiger Lauf der X und Y Bewegung ausgeschlossen. Dort wurden sie durch 2 angepasste Hülsen zentriert. Diese Arbeiten haben ca. 8 Stunden gedauert, es wird dafür eine Drehmaschine benötigt. Danach hat man einen sehr stabilen Arbeitstisch.
Un véritable outil
Vu le prix j'ai u tres peur en l'achetant ...A la réception du colis ,la qualité de l'emballage et de sont poids ,cela ma rassuréAu déballage alors la je suis surpris par la qualité du produit (l'usinage est parfait incroyable vu le prix)Je ne l'ai meme pas démonté pour le nettoyer ou retirer la peinture ,rien , je n'ai strictement rien fais, juste un peut graisser avec une bombe de graisse sous pression et réglé.Il faut impérativement le régler, car les vis de réglage ne sont pas serrées .Et la stupéfaction ,aucun point dur, aucune résistance qui pourrait jouer sur le bon fonctionnement .Conclusion ont a dans les mains UN TRES BON PRODUIT, un véritable outil pour le prix d'une breloque .Donc si vous devez en acheter une, achetez cette table a mouvement croisé.Cordialement
It's ok for the price.
I like it ,by taking some time to take it apart and file some sharp edges, put some lithium grease on the guides, it's ok for the price.I use it on a small drill to mill small jobs like brass, alluminium,copper and teflon materials.
Similar suggestions by Bolo
More from this brand
Similar items from “Workbenches”
Share with
Or share with link
https://www.bolo.ae/products/UO07114E45U