Description:
Introduction：
Measuring the absolute pressure of the enviroment using a digital barometer such as this has some interesting applications. By converting the pressure measured into altitude, you have a reliable sensor for determining the height of your robot, plane or projectile!
Using a sensor as capable as the BMP180 you can achieve accurary of 1m, with noise of only 17cm in ultra high resolution noise. The device will operate at only 0.3uA meaning low current draw for battery powered applications.
The BMP180 comes fully calibrated and ready to use. As the device operates over I2C we've added optional I2C pull ups that can be enabled using the PU (pull up) jumper on the board for your convenience and ease during breadboarding.
Using I2C, the device provides pressure and temperature as 16bit values, which are used along with calibration data within the device are used to provide a temperature compensated altitude calculation.
Features:
1.8V to 3.6V Supply Voltage
Low power consumption - 0.5uA at 1Hz
I2C interface
Max I2C Speed: 3.5Mhz
Very low noise - up to 0.02hPa (17cm)
Full calibrated
Pressure Range: 300hPa to 1100hPa (+9000m to -500m)
Package Included：
1*GY-68 BMP180 Digital Barometric Pressure Sensor Module
Reviews:
5.0 out of 5 stars One out of 4 works :-(
I am not going to change my review of the BMP180 from HiLetgo because the problems I experienced with the BMP180 is fact, however, I have changed the number of stars from one to five because of the outstanding customer service from HiLetgo. Customer service sent me datasheets (which I had studied previously trying to make the BMP180 work) but in addition, HiLetgo has stood behind their product and reputation, they sincerely apologized for the problems I have experienced with their BMP180 and offered a full refund even though the 30 day return period has expired. I wish all companies where as honest, helpful and customer focused as HiLetgo. I will consider purchasing from HiLetgo again, simply because they are an honest seller wanting to do the right thing by their customers.Bought two BMP180, one seems to work accurately, the other reads 10C higher. Swapped sensors from one position to the other and verified it was the BMP180, not my software or hardware. Ordered two more BMP180 from HiLetgo thinking I was unlucky with one sensor, next two BMP180 read 25C high and 210C high. Swapped sensor positions again just to be sure it wasn't my software or hardware and sure enough the faulty BMP180s followed the position swap. The faulty BMP180 pressure also read high by between 20 and 30mb higher than the BMP180 that is working.I will steer clear of anything with HiLetgo stamped on it in future.
5.0 out of 5 stars Does not work.
Tried using it on a Red Pitaya and an Arduino and it didn't work in any of them. The LED doesn't turn on. Don't buy this only because it's cheap.EDIT: This sensor INDEED WORKS. The sensor that does not work is the GPS HiLetgo GY-NEO6MV2.EDIT2: The GPS sensor may be working too.
1.0 out of 5 stars Bruh it did not work bruh
I want a REFUND this sensor didn't work. It has worked before from my previous purchases though. Still this shouldn't be a game of rolling dice to get the good sensor. I deserve what I PAID for!!! >:(
5.0 out of 5 stars It works really great, and the price is good
I bought this for a project I built as my final project in an Internet of Things class. It works really great, and the price is good. You will have to solder the pins on if you need them.
5.0 out of 5 stars Good value
I'm pretty new and still learning the whole Arduino thing, but this was not hard to find a piece of code for and it worked good.
5.0 out of 5 stars Great sensor; works as advertised
Two months in continuous use; no problems so far.
1.0 out of 5 stars DOA
It didnt work, will try to buy another -_-
5.0 out of 5 stars Five Stars
Good!
Visit the HiLetgo Store
HiLetgo BMP180 GY-68 Digital Barometric Pressure Sensor Module Replace BMP085 for Arduino
AED3792
Quantity:
Order today to get by 7-14 business days
Delivery fee of AED 20. Free for orders above AED 200.
Imported From: United States
At BOLO, we work hard to ensure the products you receive are new, genuine, and sourced from reputable suppliers.
BOLO is not an authorized or official retailer for most brands, nor are we affiliated with manufacturers unless specifically stated on a product page. Instead, we source verified sellers, authorized distributors or directly from the manufacturer.
Each product undergoes thorough inspection and verification at our consolidation and fulfilment centers to ensure it meets our strict authenticity and quality standards before being shipped and delivered to you.
If you ever have concerns regarding the authenticity of a product purchased from us, please contact Bolo Support. We will review your inquiry promptly and, if necessary, provide documentation verifying authenticity or offer a suitable resolution.
Your trust is our top priority, and we are committed to maintaining transparency and integrity in every transaction.
All product information, images, descriptions, and reviews originate from the manufacturer or from trusted sellers overseas. BOLO is not affiliated with, endorsed by, or an authorized retailer for most brands listed on our website unless stated otherwise.
While we strive to display accurate information, variations in packaging, labeling, instructions, or formulation may occasionally occur due to regional differences or supplier updates. For detailed or manufacturer-specific information, please contact the brand directly or reach out to BOLO Support for assistance.
Unless otherwise stated, all prices displayed on the product page include applicable taxes and import duties.
BOLO operates in accordance with the laws and regulations of United Arab Emirates. Any items found to be restricted or prohibited for sale within the UAE will be cancelled prior to shipment. We take proactive measures to ensure that only products permitted for sale in United Arab Emirates are listed on our website.
All items are shipped by air, and any products classified as “Dangerous Goods (DG)” under IATA regulations will be removed from the order and cancelled.
All orders are processed manually, and we make every effort to process them promptly once confirmed. Products cancelled due to the above reasons will be permanently removed from listings across the website.
Similar suggestions by Bolo
More from this brand
Similar items from “Pressure Probes & Sensors”
Share with
Or share with link
https://www.bolo.ae/products/UO01S527RKF
Visit the HiLetgo Store
HiLetgo BMP180 GY-68 Digital Barometric Pressure Sensor Module Replace BMP085 for Arduino
AED3792
Quantity:
Order today to get by 7-14 business days
Delivery fee of AED 20. Free for orders above AED 200.
Imported From: United States
At BOLO, we work hard to ensure the products you receive are new, genuine, and sourced from reputable suppliers.
BOLO is not an authorized or official retailer for most brands, nor are we affiliated with manufacturers unless specifically stated on a product page. Instead, we source verified sellers, authorized distributors or directly from the manufacturer.
Each product undergoes thorough inspection and verification at our consolidation and fulfilment centers to ensure it meets our strict authenticity and quality standards before being shipped and delivered to you.
If you ever have concerns regarding the authenticity of a product purchased from us, please contact Bolo Support. We will review your inquiry promptly and, if necessary, provide documentation verifying authenticity or offer a suitable resolution.
Your trust is our top priority, and we are committed to maintaining transparency and integrity in every transaction.
All product information, images, descriptions, and reviews originate from the manufacturer or from trusted sellers overseas. BOLO is not affiliated with, endorsed by, or an authorized retailer for most brands listed on our website unless stated otherwise.
While we strive to display accurate information, variations in packaging, labeling, instructions, or formulation may occasionally occur due to regional differences or supplier updates. For detailed or manufacturer-specific information, please contact the brand directly or reach out to BOLO Support for assistance.
Unless otherwise stated, all prices displayed on the product page include applicable taxes and import duties.
BOLO operates in accordance with the laws and regulations of United Arab Emirates. Any items found to be restricted or prohibited for sale within the UAE will be cancelled prior to shipment. We take proactive measures to ensure that only products permitted for sale in United Arab Emirates are listed on our website.
All items are shipped by air, and any products classified as “Dangerous Goods (DG)” under IATA regulations will be removed from the order and cancelled.
All orders are processed manually, and we make every effort to process them promptly once confirmed. Products cancelled due to the above reasons will be permanently removed from listings across the website.
Description:
Introduction：
Measuring the absolute pressure of the enviroment using a digital barometer such as this has some interesting applications. By converting the pressure measured into altitude, you have a reliable sensor for determining the height of your robot, plane or projectile!
Using a sensor as capable as the BMP180 you can achieve accurary of 1m, with noise of only 17cm in ultra high resolution noise. The device will operate at only 0.3uA meaning low current draw for battery powered applications.
The BMP180 comes fully calibrated and ready to use. As the device operates over I2C we've added optional I2C pull ups that can be enabled using the PU (pull up) jumper on the board for your convenience and ease during breadboarding.
Using I2C, the device provides pressure and temperature as 16bit values, which are used along with calibration data within the device are used to provide a temperature compensated altitude calculation.
Features:
1.8V to 3.6V Supply Voltage
Low power consumption - 0.5uA at 1Hz
I2C interface
Max I2C Speed: 3.5Mhz
Very low noise - up to 0.02hPa (17cm)
Full calibrated
Pressure Range: 300hPa to 1100hPa (+9000m to -500m)
Package Included：
1*GY-68 BMP180 Digital Barometric Pressure Sensor Module
Reviews:
5.0 out of 5 stars One out of 4 works :-(
I am not going to change my review of the BMP180 from HiLetgo because the problems I experienced with the BMP180 is fact, however, I have changed the number of stars from one to five because of the outstanding customer service from HiLetgo. Customer service sent me datasheets (which I had studied previously trying to make the BMP180 work) but in addition, HiLetgo has stood behind their product and reputation, they sincerely apologized for the problems I have experienced with their BMP180 and offered a full refund even though the 30 day return period has expired. I wish all companies where as honest, helpful and customer focused as HiLetgo. I will consider purchasing from HiLetgo again, simply because they are an honest seller wanting to do the right thing by their customers.Bought two BMP180, one seems to work accurately, the other reads 10C higher. Swapped sensors from one position to the other and verified it was the BMP180, not my software or hardware. Ordered two more BMP180 from HiLetgo thinking I was unlucky with one sensor, next two BMP180 read 25C high and 210C high. Swapped sensor positions again just to be sure it wasn't my software or hardware and sure enough the faulty BMP180s followed the position swap. The faulty BMP180 pressure also read high by between 20 and 30mb higher than the BMP180 that is working.I will steer clear of anything with HiLetgo stamped on it in future.
5.0 out of 5 stars Does not work.
Tried using it on a Red Pitaya and an Arduino and it didn't work in any of them. The LED doesn't turn on. Don't buy this only because it's cheap.EDIT: This sensor INDEED WORKS. The sensor that does not work is the GPS HiLetgo GY-NEO6MV2.EDIT2: The GPS sensor may be working too.
1.0 out of 5 stars Bruh it did not work bruh
I want a REFUND this sensor didn't work. It has worked before from my previous purchases though. Still this shouldn't be a game of rolling dice to get the good sensor. I deserve what I PAID for!!! >:(
5.0 out of 5 stars It works really great, and the price is good
I bought this for a project I built as my final project in an Internet of Things class. It works really great, and the price is good. You will have to solder the pins on if you need them.
5.0 out of 5 stars Good value
I'm pretty new and still learning the whole Arduino thing, but this was not hard to find a piece of code for and it worked good.
5.0 out of 5 stars Great sensor; works as advertised
Two months in continuous use; no problems so far.
1.0 out of 5 stars DOA
It didnt work, will try to buy another -_-
5.0 out of 5 stars Five Stars
Good!
Similar suggestions by Bolo
More from this brand
Similar items from “Pressure Probes & Sensors”
Share with
Or share with link
https://www.bolo.ae/products/UO01S527RKF