Description:
PAC RP4. 2-TY11 Radiopro4 Ty11
Reviews:
5.0 out of 5 stars Working with my 2013 Highlander.
I installed this with a JVC 2660, and it's working great in my 2013 Toyota Highlander. Don't let all the wires scare you. Mostly, it's putting colors together, and these come with way more than they need. It's not too bad at all. I used Posi twist connectors for my wiring. They are super easy and are working great for me.
5.0 out of 5 stars Only use this!!!!
After struggling with the alternative harnesses, I found this one. Seriously, do not waste your time with the other options. This one retains functionality of the NAV unit and HVAC controls.
5.0 out of 5 stars Worked with Toyota Venza JBL system with factory SWC
Replaced the JBL head unit in my wifes 2011 Venza and this worked perfect. You can still use fader front to back and left to right. Also kept the steering wheel controls. Only thing was it came with older instructions that didn't really clarify how to connect steering wheel control wires. (Missing 1 wire color connection) After going onto there website and looking up the model, the proper updated instructions were found. The swc ground wire is already grounded so no need to worry about that. Just connect key1 & key2 wire to proper vehicle harness wires and you should be ready to go. That was the only confusing part but ended up being so simple in the end. I Overthought it! Lol Oh and make sure the little plug is in the unit good. I had to pull head unit back out a few days later after losing sound to some speakers. I ended up just pushing the little plug on the side of the module in a little more and problem solved..
5.0 out of 5 stars Worked great and cheapest option
Works great for my 2017 Corolla SE so I'm hoping to let people know who may have the same car.. Easy install but I had to call them a few times. I used with the CAMTY12 and USBTY1 to keep my factory backup cam and factory USB. The song skip doesn't work every time though :\You plug the USBty1 into the USB port of your radio that you would normally use for Carplay, and then you connect to Carplay through the factory port. I had to call about the backup cam but I forgot to connect the violet wire to my reverse on the head unit. Also, make sure you connect the parking break green wire, because I didn't and I had to unhook it all and wire that up.
1.0 out of 5 stars not plug and play
does not have any directions and too many open ended wires not plug and play as advertised.
4.0 out of 5 stars Exellent Product but You Need Skill and experience installing aftermarket radios!
I used this interface for My Lexus Xr 330 2006 no JBL and No Navigation, is not easy as it looks , but work once you figure it out,Has everything, Bypass the analog amplifier and retain SWC is already programed on the basic functions , select the dip switches than correspond to your aftermarket radio you will install and Separate the cables that you don't need, cut or caped and work plug and play.
5.0 out of 5 stars Expensive but effective
As much as the generic media player i used it on, but works well, allowing the retainment of several OEM functions.Installed a PLZ 7" android auto system in a 2010 prius. Worked well in allowing the use of steering wheel controls. Couldn't retain the use of the OEM rearview camera, but I believe that's because the OEM camera runs on 6v instead of 12v.
3.0 out of 5 stars It works - eventually, mostly ... well enough for me
2008 Sienna with JBL and voice nav; Atoto S8 Gen 2 Ultra. It has a bulky multi-connector harness they want to work for all manner of Toyota, with multiple connectors you don't use (but need to stow behind the dash, the unused connectors are not detachable/modular). This makes the unit a bit unwieldy to handle while assembling to the radio connector, and awkward to get stowed in the dash.First one wouldn't output steering wheel control signals, and troubleshooting was painful (long waits for tech support, no written help, unclear manual, etc) but Bolo swapped it for a replacement the next morning and the new unit plugged into the harness and those controls worked.The RP4.2-TY11 wiring harness didn't include the connector to pick up the reverse, parking brake, and speed sensor wires from the existing 5-pin gray connector in the dash for the OEM radio, so I tried the included RP4.2 ODB pickup to get those signals ... this seemed to work but the next morning I had 3 spurious "camshaft positioning" error codes, and my battery was dead! (After a very very long wait, tech support told me "I haven't heard of that before" and didn't offer any advice.) Anyway, I didn't like that it was occupying the ODB pickup spot, as I want to leave a bluetooth ELM27 plugged in there, so I tossed the RP4.2 ODB option, cleared the codes, recharged the battery, and manually connected from the factory wiring direct to the radio and I've had no problem with vehicle battery or error code since then (it's been a few days)The RP4.2 provides OEM camera power, which is nice, but no adapter from the factory wiring to the RCA jack needed for the OEM camera to feed the Atoto; I had to get another (Axxess) harness for that, and it includes a 12V-to-6V converter anyway, so in the end the RP4.2 doesn't help with the OEM camera.I've lost the front/back fade control from the radio "sound field" controls - tried with "real time fade" control both off and on, but if I shift the sound field towards the rear I get just reduced signal all around - shift it all the way to the rear, I get no output at all. I just made sure it was centered before disconnecting the factory radio, leave the Atoto centered, don't mess with it. For our two-person usage that's irksome, but not fatal; might be an issue if you carrie passengers, I guess.Sound quality seems reduced (harsher), to me, but RadioPro told me they "don't alter the audio" so I guess that's a difference between the Atoto and the OEM (Denso) radio. But I'm not clear on how the RP4.2 "doesn't alter" the audio, whilst providing controls in the app for adjust equalization (treble, bass, balance, etc) - that must be something to do with controlling the factory amp?In the end, after three days spent assembling, installing (multiple times), troubleshooting and configuring my setup is working well enough. The unit, with all its wiring, is jammed into my van's dash (I'm glad the Atoto is a shallow/small unit so there's room!), I have adequate sound coming from all 10 of the factory speakers, my steering wheel controls work, and I've learned a fair bit about how the van's audio system operates.
No funciona.
Nunca funcionó, mi instalador ha hecho varios intentos pero no funciona.
Exactly what I needed for Alpine head unit!
Exactly what I needed for my alpine head unit in 2011 Tacoma.You’ll want to by the brake bypass. You need it, it’s like $20 save yourself tons of hassle.
Easy install
Good wiring harness and was easy to install with my clarion touch head unit.
Broken product
This product was received broken and would not function when connected.Sadly, the option to return the product had already passed by the time I learned the product was defective.
Visit the PAC Store
PAC RP4.2-TY11 Radiopro4 Ty11
AED83673
Quantity:
Order today to get by 7-14 business days
This item qualifies for free delivery
Imported From: United States
At BOLO, we work hard to ensure the products you receive are new, genuine, and sourced from reputable suppliers.
BOLO is not an authorized or official retailer for most brands, nor are we affiliated with manufacturers unless specifically stated on a product page. Instead, we source verified sellers, authorized distributors or directly from the manufacturer.
Each product undergoes thorough inspection and verification at our consolidation and fulfilment centers to ensure it meets our strict authenticity and quality standards before being shipped and delivered to you.
If you ever have concerns regarding the authenticity of a product purchased from us, please contact Bolo Support. We will review your inquiry promptly and, if necessary, provide documentation verifying authenticity or offer a suitable resolution.
Your trust is our top priority, and we are committed to maintaining transparency and integrity in every transaction.
All product information, images, descriptions, and reviews originate from the manufacturer or from trusted sellers overseas. BOLO is not affiliated with, endorsed by, or an authorized retailer for most brands listed on our website unless stated otherwise.
While we strive to display accurate information, variations in packaging, labeling, instructions, or formulation may occasionally occur due to regional differences or supplier updates. For detailed or manufacturer-specific information, please contact the brand directly or reach out to BOLO Support for assistance.
Unless otherwise stated, all prices displayed on the product page include applicable taxes and import duties.
BOLO operates in accordance with the laws and regulations of United Arab Emirates. Any items found to be restricted or prohibited for sale within the UAE will be cancelled prior to shipment. We take proactive measures to ensure that only products permitted for sale in United Arab Emirates are listed on our website.
All items are shipped by air, and any products classified as “Dangerous Goods (DG)” under IATA regulations will be removed from the order and cancelled.
All orders are processed manually, and we make every effort to process them promptly once confirmed. Products cancelled due to the above reasons will be permanently removed from listings across the website.
Similar suggestions by Bolo
More from this brand
Similar items from “Radio Wiring Harnesses”
Share with
Or share with link
https://www.bolo.ae/products/UO01O63T6RF
Visit the PAC Store
PAC RP4.2-TY11 Radiopro4 Ty11
AED83673
Quantity:
Order today to get by 7-14 business days
This item qualifies for free delivery
Imported From: United States
At BOLO, we work hard to ensure the products you receive are new, genuine, and sourced from reputable suppliers.
BOLO is not an authorized or official retailer for most brands, nor are we affiliated with manufacturers unless specifically stated on a product page. Instead, we source verified sellers, authorized distributors or directly from the manufacturer.
Each product undergoes thorough inspection and verification at our consolidation and fulfilment centers to ensure it meets our strict authenticity and quality standards before being shipped and delivered to you.
If you ever have concerns regarding the authenticity of a product purchased from us, please contact Bolo Support. We will review your inquiry promptly and, if necessary, provide documentation verifying authenticity or offer a suitable resolution.
Your trust is our top priority, and we are committed to maintaining transparency and integrity in every transaction.
All product information, images, descriptions, and reviews originate from the manufacturer or from trusted sellers overseas. BOLO is not affiliated with, endorsed by, or an authorized retailer for most brands listed on our website unless stated otherwise.
While we strive to display accurate information, variations in packaging, labeling, instructions, or formulation may occasionally occur due to regional differences or supplier updates. For detailed or manufacturer-specific information, please contact the brand directly or reach out to BOLO Support for assistance.
Unless otherwise stated, all prices displayed on the product page include applicable taxes and import duties.
BOLO operates in accordance with the laws and regulations of United Arab Emirates. Any items found to be restricted or prohibited for sale within the UAE will be cancelled prior to shipment. We take proactive measures to ensure that only products permitted for sale in United Arab Emirates are listed on our website.
All items are shipped by air, and any products classified as “Dangerous Goods (DG)” under IATA regulations will be removed from the order and cancelled.
All orders are processed manually, and we make every effort to process them promptly once confirmed. Products cancelled due to the above reasons will be permanently removed from listings across the website.
Description:
PAC RP4. 2-TY11 Radiopro4 Ty11
Reviews:
5.0 out of 5 stars Working with my 2013 Highlander.
I installed this with a JVC 2660, and it's working great in my 2013 Toyota Highlander. Don't let all the wires scare you. Mostly, it's putting colors together, and these come with way more than they need. It's not too bad at all. I used Posi twist connectors for my wiring. They are super easy and are working great for me.
5.0 out of 5 stars Only use this!!!!
After struggling with the alternative harnesses, I found this one. Seriously, do not waste your time with the other options. This one retains functionality of the NAV unit and HVAC controls.
5.0 out of 5 stars Worked with Toyota Venza JBL system with factory SWC
Replaced the JBL head unit in my wifes 2011 Venza and this worked perfect. You can still use fader front to back and left to right. Also kept the steering wheel controls. Only thing was it came with older instructions that didn't really clarify how to connect steering wheel control wires. (Missing 1 wire color connection) After going onto there website and looking up the model, the proper updated instructions were found. The swc ground wire is already grounded so no need to worry about that. Just connect key1 & key2 wire to proper vehicle harness wires and you should be ready to go. That was the only confusing part but ended up being so simple in the end. I Overthought it! Lol Oh and make sure the little plug is in the unit good. I had to pull head unit back out a few days later after losing sound to some speakers. I ended up just pushing the little plug on the side of the module in a little more and problem solved..
5.0 out of 5 stars Worked great and cheapest option
Works great for my 2017 Corolla SE so I'm hoping to let people know who may have the same car.. Easy install but I had to call them a few times. I used with the CAMTY12 and USBTY1 to keep my factory backup cam and factory USB. The song skip doesn't work every time though :\You plug the USBty1 into the USB port of your radio that you would normally use for Carplay, and then you connect to Carplay through the factory port. I had to call about the backup cam but I forgot to connect the violet wire to my reverse on the head unit. Also, make sure you connect the parking break green wire, because I didn't and I had to unhook it all and wire that up.
1.0 out of 5 stars not plug and play
does not have any directions and too many open ended wires not plug and play as advertised.
4.0 out of 5 stars Exellent Product but You Need Skill and experience installing aftermarket radios!
I used this interface for My Lexus Xr 330 2006 no JBL and No Navigation, is not easy as it looks , but work once you figure it out,Has everything, Bypass the analog amplifier and retain SWC is already programed on the basic functions , select the dip switches than correspond to your aftermarket radio you will install and Separate the cables that you don't need, cut or caped and work plug and play.
5.0 out of 5 stars Expensive but effective
As much as the generic media player i used it on, but works well, allowing the retainment of several OEM functions.Installed a PLZ 7" android auto system in a 2010 prius. Worked well in allowing the use of steering wheel controls. Couldn't retain the use of the OEM rearview camera, but I believe that's because the OEM camera runs on 6v instead of 12v.
3.0 out of 5 stars It works - eventually, mostly ... well enough for me
2008 Sienna with JBL and voice nav; Atoto S8 Gen 2 Ultra. It has a bulky multi-connector harness they want to work for all manner of Toyota, with multiple connectors you don't use (but need to stow behind the dash, the unused connectors are not detachable/modular). This makes the unit a bit unwieldy to handle while assembling to the radio connector, and awkward to get stowed in the dash.First one wouldn't output steering wheel control signals, and troubleshooting was painful (long waits for tech support, no written help, unclear manual, etc) but Bolo swapped it for a replacement the next morning and the new unit plugged into the harness and those controls worked.The RP4.2-TY11 wiring harness didn't include the connector to pick up the reverse, parking brake, and speed sensor wires from the existing 5-pin gray connector in the dash for the OEM radio, so I tried the included RP4.2 ODB pickup to get those signals ... this seemed to work but the next morning I had 3 spurious "camshaft positioning" error codes, and my battery was dead! (After a very very long wait, tech support told me "I haven't heard of that before" and didn't offer any advice.) Anyway, I didn't like that it was occupying the ODB pickup spot, as I want to leave a bluetooth ELM27 plugged in there, so I tossed the RP4.2 ODB option, cleared the codes, recharged the battery, and manually connected from the factory wiring direct to the radio and I've had no problem with vehicle battery or error code since then (it's been a few days)The RP4.2 provides OEM camera power, which is nice, but no adapter from the factory wiring to the RCA jack needed for the OEM camera to feed the Atoto; I had to get another (Axxess) harness for that, and it includes a 12V-to-6V converter anyway, so in the end the RP4.2 doesn't help with the OEM camera.I've lost the front/back fade control from the radio "sound field" controls - tried with "real time fade" control both off and on, but if I shift the sound field towards the rear I get just reduced signal all around - shift it all the way to the rear, I get no output at all. I just made sure it was centered before disconnecting the factory radio, leave the Atoto centered, don't mess with it. For our two-person usage that's irksome, but not fatal; might be an issue if you carrie passengers, I guess.Sound quality seems reduced (harsher), to me, but RadioPro told me they "don't alter the audio" so I guess that's a difference between the Atoto and the OEM (Denso) radio. But I'm not clear on how the RP4.2 "doesn't alter" the audio, whilst providing controls in the app for adjust equalization (treble, bass, balance, etc) - that must be something to do with controlling the factory amp?In the end, after three days spent assembling, installing (multiple times), troubleshooting and configuring my setup is working well enough. The unit, with all its wiring, is jammed into my van's dash (I'm glad the Atoto is a shallow/small unit so there's room!), I have adequate sound coming from all 10 of the factory speakers, my steering wheel controls work, and I've learned a fair bit about how the van's audio system operates.
No funciona.
Nunca funcionó, mi instalador ha hecho varios intentos pero no funciona.
Exactly what I needed for Alpine head unit!
Exactly what I needed for my alpine head unit in 2011 Tacoma.You’ll want to by the brake bypass. You need it, it’s like $20 save yourself tons of hassle.
Easy install
Good wiring harness and was easy to install with my clarion touch head unit.
Broken product
This product was received broken and would not function when connected.Sadly, the option to return the product had already passed by the time I learned the product was defective.
Similar suggestions by Bolo
More from this brand
Similar items from “Radio Wiring Harnesses”
Share with
Or share with link
https://www.bolo.ae/products/UO01O63T6RF