Description:
Reviews:
5.0 out of 5 stars FORTUNE & GLORY
Ok, seriously, if you’re brave AND a home owner, BUY THIS.This is the literally the BEST product for mold or mildew i have ever used.YES, it may need to be evaluated by the Chernobyl Nuclear Assessment Team down the road, but PLEASE let me explain and leave some application pointers#1) If you're not using PPE + a respirator, make SURE you only plan to work on small patches at a time, and in a well ventilated area you can get in and out of to fresh air quickly. I cannot stress this enough. This stuff is STRONG. As in...BLEACH x about 5. You can Taste It.Do NOT BREATH IT! If you can, hold your breath, hold the bottle at a safe distance, spray the area quickly, then runaway!“Spray. Then Runaway.”#spraythenrunaway#2) Get a CLEAN towel and place it under the door crack of the room you run out of after spraying. use it, ALWAYS! Clean towel is your buddy here.#3) After 15 minutes, Hold your breath and check out your progress carefully. It dries VERY quickly and the smell/fumes drop to a good 1/2 of what they are during initial application. Again, wait AT LEAST 15 minutes before checking. More mold? Spray a bit more in the areas that need it, ...runaway #spraythenrunaway, ....wait 15 more mins and check again....same process as above.#4 Repeat protocol until about 15-25% of mold or mildew remains.#5 WAIT 2-5 HOURS then check again. At this point, the mold should be almost 100% gone.#6 IF more application needed, repeat process again as many times as needed, ....then proceed to fortune and glory.My Actual Spray Process I used on our Bathroom Window Casing:1. Remove Blinds.2. Cut large piece of cardboard out to use as a mask for window vinyl, steel or fibrex behind the wood casing.3. Grab paper towels, about 10 squares and fold them into little wads that can be stuffed at the bottom of the window sill's left and right sides to catch the runoff from the vertical side casings.4. Grab a small ziplock bag to store the used paper towels in and keep them sealed up and the fumes contained. You can just leave that in the sink.5. Get a fan and set to low about 3 feet from the open window and blowing toward it.6. Grab your cardboard and your RMR 86, take a deep breath, hold it....hit the left side wood casing, using the cardboard as a mask for the window behind the casing, hit the right side, same process. Do NOT try and do the top casing, or spray will potentially come back down on you and get on your skin. Don't overspray. Just hit them quickly enough to cover each side. About 15-20 seconds total should be fine. Stuff paper towel squares in the lower right and left window frame, runaway! (for me, I closed the door behind me and stuffed a paper towel under it. Worked like a charm as the smell never got into the rest of the house.15 minutes later, I cautiously walked back in each time, smelling carefully from a distance and as I approached, as I said, the fumes and volatility drops a LOT after the first 15 minutes but is still STRONG!I removed the paper towels used to capture the runoff in the lower left and right sills, sealed them in the baggie, dropped it back in the sink. Then went outside the room to fresh air, took another deep breath and repeated step 6.Our casing was BAD, so I had to hit it about 4x over an hour.For me, and because I was doing such a small area with plenty of ventilation, I did not go full PPE or respirator. I used long dish gloves, goggles and held my breath each application, keeping the airflow via a fan pushing air OUT the wide open window and as to move any overspray or fumes outside asap.The first application, not a lot of difference. Second, BIG difference. By application 4, 85% of the mold and mildew were gone and we were looking at CLEAN wood. Next morning, I checked and the mold was 100% GONE...so this stuff KEEPS working long after that 15 minute mark. I'd say it likely keeps working up to 24 hours after application so expect to see additional progress on the affected area up to a day later.For the TOP casing, I waited until the sides were treated as explained above. Then 2 days later, I used the same ventilation setup as before. This time, I grabbed a paint brush, poured a tiny bit of rmr 86 into a plastic cup, and lightly painted it onto the top casing, still wearing gloves and goggles. It took more applications...i believe 5 or 6, but was a lot less stressful as I was using so little of the stuff and the fumes, although still bad, were no where near what spraying did. Each application, I'd let sit 15-20 mins, and I kept the paint brush and tiny bit of RMR solution in a cup in the sink so I could just grab and go each new session or dump out with running water. This worked well on the top casing as it was no where NEAR as caked as the left and right sides were, but something tells me, spraying/aerating this stuff out of the bottle must increase effectiveness, as it IS a corrosive and reacts with O2.I'd say if you're doing ANY job larger than what I described here, go Full PPE with Respirator and make SURE the room you are working out of is well ventilated and siphoned OFF from the rest of the house.If you're just squirting a few corners of your bathroom...1-2 squirts, 1 area at a time, then gloves, eye protection and lotsa of ventilation should be fine. Higher up areas, I'd recommend the paintbrush trick. And I'd personally NEVER try and spray multiple areas in the same room...I'd do 1 at a time and leave. Even a few squirts in a few areas adds up fast, and you don't want to create a potential "fume trap" by which you get a breath of lingering spray and burn your lungs/throat, etc. Not worth it!
5.0 out of 5 stars This Product Really Works. Highly Recommend.
This stuff is awesome. I had a weird crevice between my shower door/wall/ floor. Weird crevice. I had a buildup of black nasty gunk I couldn’t treat w bleach and a toothbrush scrub. Mold or mildew or the moldew combo. I sprayed this product on the affected area and pow! When I came back 15 min later it was 95% gone. Amazing. — It does have a chemical smell similar to bleach but who cares? Spray then walk away. Go chill out for a bit and come back 30 min later. And that gunk will be gone. Totally ate up mildew in the lower grout components of my shower tile too which scrubbing couldn’t handle. Great product. Highly recommend.
5.0 out of 5 stars Powerful Mold Remover That Works Instantly
I used this spray on mold in my bathroom caused by lack of ventilation, and it worked exactly as promised. The stains disappeared almost instantly with no scrubbing required. The application was simple, and the results were noticeable right away. All I had to do was spray the problem areas and let it sit and do its job.For safety purposes, I opened my bathroom window first, grabbed some goggles and gloves, wrapped my hair, and then I sprayed. Since I was spraying the bathroom ceiling, I wanted to protect myself as much as possible. Also, the smell is strong, maybe as strong as a bleach smell, but make sure to open a window first.It’s rare to find a product that works this well, but this one truly does.
4.0 out of 5 stars Works well
This works very well to remove mildew stains from my shower. It is very strong. My complaint is that the sprayer will stop working well and it often leaks.
5.0 out of 5 stars Amazing and fast working!
This product is amazing!!!! Removed all bathroom mold on ceiling and walls. Super strong odor. Wear mask and eye protection!!! Have plenty of ventilation!!!
5.0 out of 5 stars Product works !!
I bought this for one purpose, and that was to remove some mold in the shower it worked and as I looked for other areas where this could work, it removed all the discoloration on my outdoor plastic patio furniture, and I had some limestone that had very black weathering on my outdoor balcony, and I tried this product on the stone and it removed the black mildew Very surprised this worked on stone and the outcome was very similar to power washing it. the odor is strong. You have to be prepared well ventilated area You also have to make sure that you fully rinse anything that you used it on otherwise the smell will linger and the texture will feel off and it will continue to penetrate whatever surface it’s on so flush with water well after use, but it’s a winner.
5.0 out of 5 stars Extremely Effective — Makes Bathroom Cleaning Effortless
This cleaning spray has been a game-changer for keeping my bathroom clean. I’ve struggled with stubborn mold and mildew stains around grout and corners for years, and this spray works almost instantly without scrubbing.Application is simple: spray directly on the affected areas, wait a few minutes, and the stains fade away. The formula is powerful enough to tackle tough discoloration on shower floors, tiles, and bathroom walls. Even long-standing, dark mildew spots became noticeably lighter after a single treatment.I also appreciate that it doesn’t require aggressive scrubbing or harsh tools, which makes the cleaning process faster and less messy. It has a mild scent compared to traditional mold removers, which makes it much more pleasant to use indoors.Overall, this spray is powerful, convenient, and reliable. It makes cleaning mold and mildew virtually effortless, and I’ll definitely continue keeping it on hand for bathroom maintenance.
5.0 out of 5 stars This stuff really worked for me. Another satisfied customer!!
I really wish I would have taken a before and after picture. But I was just excited to see if it worked. And it DID!!! OMG, the mold on our shower tiles, gone, stain on our shower curtain, gone. A little pricey, but definitely worth it. I had no issue with the spray it came with. It worked great. I will be getting more to work on my outside fence. I will post before and after on that project for sure.
Super strong AND effective
This smells just as it should because it DOES THE JOB. Killed stubborn mould without touching or scrubbing. Very strong But it did smell which is understandable. Did it in the morning and left windows open all day. Expensive but it did the job so was definitely good value instead of wasting money again on a cheaper product that’s less effective
Did not do anything like it suggested or what phots dippicted
It promises to remove mildew stains from concrete and stucco. We followed the directions exactly and it made absolutely no difference. I wasted $90. I got better results with vinegar. Very dissatisfied.
Works as advertised
Great product and to be honest it blew me away with how effective it was. Removed all the mold and did not leave any stains. I would advise to wear a mask as it is quite strong and does produce a lot fumes which can be quite irritating
Great product!
Works wonders in munites!
Spray Nozzle? Spray Nozzle?
Pro:•Straight off the bat, this stuff is awesome, it shifts the mold in seconds.Con:•It's a bit of a hefty price and then they don't even supply a spray nozzle 🤦🏼♂️. Come on guys, WTF?•Your house will smell like a swimming baths once you use it, so keep windows and doors open to help dissipate the smell.•When you buy a replacement nozzle and/or an entire new bottle, make sure it doesn't leak beforehand as you really don't want this stuff on your skin........ or just wear gloves.
Visit the RMR Brands Store
RMR-86 Instant Mold and Mildew Stain Remover Spray - Scrub Free Formula, 30 Fl Oz
AED14348
Quantity:
Order today to get by 7-14 business days
Delivery fee of AED 20. Free for orders above AED 200.
Imported From: United States
At BOLO, we work hard to ensure the products you receive are new, genuine, and sourced from reputable suppliers.
BOLO is not an authorized or official retailer for most brands, nor are we affiliated with manufacturers unless specifically stated on a product page. Instead, we source verified sellers, authorized distributors or directly from the manufacturer.
Each product undergoes thorough inspection and verification at our consolidation and fulfilment centers to ensure it meets our strict authenticity and quality standards before being shipped and delivered to you.
If you ever have concerns regarding the authenticity of a product purchased from us, please contact Bolo Support. We will review your inquiry promptly and, if necessary, provide documentation verifying authenticity or offer a suitable resolution.
Your trust is our top priority, and we are committed to maintaining transparency and integrity in every transaction.
All product information, images, descriptions, and reviews originate from the manufacturer or from trusted sellers overseas. BOLO is not affiliated with, endorsed by, or an authorized retailer for most brands listed on our website unless stated otherwise.
While we strive to display accurate information, variations in packaging, labeling, instructions, or formulation may occasionally occur due to regional differences or supplier updates. For detailed or manufacturer-specific information, please contact the brand directly or reach out to BOLO Support for assistance.
Unless otherwise stated, all prices displayed on the product page include applicable taxes and import duties.
BOLO operates in accordance with the laws and regulations of United Arab Emirates. Any items found to be restricted or prohibited for sale within the UAE will be cancelled prior to shipment. We take proactive measures to ensure that only products permitted for sale in United Arab Emirates are listed on our website.
All items are shipped by air, and any products classified as “Dangerous Goods (DG)” under IATA regulations will be removed from the order and cancelled.
All orders are processed manually, and we make every effort to process them promptly once confirmed. Products cancelled due to the above reasons will be permanently removed from listings across the website.
Similar suggestions by Bolo
More from this brand
Similar items from “Mold & Mildew Removers”
Share with
Or share with link
https://www.bolo.ae/products/UO01A3L22X4
Visit the RMR Brands Store
RMR-86 Instant Mold and Mildew Stain Remover Spray - Scrub Free Formula, 30 Fl Oz
AED14348
Quantity:
Order today to get by 7-14 business days
Delivery fee of AED 20. Free for orders above AED 200.
Imported From: United States
At BOLO, we work hard to ensure the products you receive are new, genuine, and sourced from reputable suppliers.
BOLO is not an authorized or official retailer for most brands, nor are we affiliated with manufacturers unless specifically stated on a product page. Instead, we source verified sellers, authorized distributors or directly from the manufacturer.
Each product undergoes thorough inspection and verification at our consolidation and fulfilment centers to ensure it meets our strict authenticity and quality standards before being shipped and delivered to you.
If you ever have concerns regarding the authenticity of a product purchased from us, please contact Bolo Support. We will review your inquiry promptly and, if necessary, provide documentation verifying authenticity or offer a suitable resolution.
Your trust is our top priority, and we are committed to maintaining transparency and integrity in every transaction.
All product information, images, descriptions, and reviews originate from the manufacturer or from trusted sellers overseas. BOLO is not affiliated with, endorsed by, or an authorized retailer for most brands listed on our website unless stated otherwise.
While we strive to display accurate information, variations in packaging, labeling, instructions, or formulation may occasionally occur due to regional differences or supplier updates. For detailed or manufacturer-specific information, please contact the brand directly or reach out to BOLO Support for assistance.
Unless otherwise stated, all prices displayed on the product page include applicable taxes and import duties.
BOLO operates in accordance with the laws and regulations of United Arab Emirates. Any items found to be restricted or prohibited for sale within the UAE will be cancelled prior to shipment. We take proactive measures to ensure that only products permitted for sale in United Arab Emirates are listed on our website.
All items are shipped by air, and any products classified as “Dangerous Goods (DG)” under IATA regulations will be removed from the order and cancelled.
All orders are processed manually, and we make every effort to process them promptly once confirmed. Products cancelled due to the above reasons will be permanently removed from listings across the website.
Description:
Reviews:
5.0 out of 5 stars FORTUNE & GLORY
Ok, seriously, if you’re brave AND a home owner, BUY THIS.This is the literally the BEST product for mold or mildew i have ever used.YES, it may need to be evaluated by the Chernobyl Nuclear Assessment Team down the road, but PLEASE let me explain and leave some application pointers#1) If you're not using PPE + a respirator, make SURE you only plan to work on small patches at a time, and in a well ventilated area you can get in and out of to fresh air quickly. I cannot stress this enough. This stuff is STRONG. As in...BLEACH x about 5. You can Taste It.Do NOT BREATH IT! If you can, hold your breath, hold the bottle at a safe distance, spray the area quickly, then runaway!“Spray. Then Runaway.”#spraythenrunaway#2) Get a CLEAN towel and place it under the door crack of the room you run out of after spraying. use it, ALWAYS! Clean towel is your buddy here.#3) After 15 minutes, Hold your breath and check out your progress carefully. It dries VERY quickly and the smell/fumes drop to a good 1/2 of what they are during initial application. Again, wait AT LEAST 15 minutes before checking. More mold? Spray a bit more in the areas that need it, ...runaway #spraythenrunaway, ....wait 15 more mins and check again....same process as above.#4 Repeat protocol until about 15-25% of mold or mildew remains.#5 WAIT 2-5 HOURS then check again. At this point, the mold should be almost 100% gone.#6 IF more application needed, repeat process again as many times as needed, ....then proceed to fortune and glory.My Actual Spray Process I used on our Bathroom Window Casing:1. Remove Blinds.2. Cut large piece of cardboard out to use as a mask for window vinyl, steel or fibrex behind the wood casing.3. Grab paper towels, about 10 squares and fold them into little wads that can be stuffed at the bottom of the window sill's left and right sides to catch the runoff from the vertical side casings.4. Grab a small ziplock bag to store the used paper towels in and keep them sealed up and the fumes contained. You can just leave that in the sink.5. Get a fan and set to low about 3 feet from the open window and blowing toward it.6. Grab your cardboard and your RMR 86, take a deep breath, hold it....hit the left side wood casing, using the cardboard as a mask for the window behind the casing, hit the right side, same process. Do NOT try and do the top casing, or spray will potentially come back down on you and get on your skin. Don't overspray. Just hit them quickly enough to cover each side. About 15-20 seconds total should be fine. Stuff paper towel squares in the lower right and left window frame, runaway! (for me, I closed the door behind me and stuffed a paper towel under it. Worked like a charm as the smell never got into the rest of the house.15 minutes later, I cautiously walked back in each time, smelling carefully from a distance and as I approached, as I said, the fumes and volatility drops a LOT after the first 15 minutes but is still STRONG!I removed the paper towels used to capture the runoff in the lower left and right sills, sealed them in the baggie, dropped it back in the sink. Then went outside the room to fresh air, took another deep breath and repeated step 6.Our casing was BAD, so I had to hit it about 4x over an hour.For me, and because I was doing such a small area with plenty of ventilation, I did not go full PPE or respirator. I used long dish gloves, goggles and held my breath each application, keeping the airflow via a fan pushing air OUT the wide open window and as to move any overspray or fumes outside asap.The first application, not a lot of difference. Second, BIG difference. By application 4, 85% of the mold and mildew were gone and we were looking at CLEAN wood. Next morning, I checked and the mold was 100% GONE...so this stuff KEEPS working long after that 15 minute mark. I'd say it likely keeps working up to 24 hours after application so expect to see additional progress on the affected area up to a day later.For the TOP casing, I waited until the sides were treated as explained above. Then 2 days later, I used the same ventilation setup as before. This time, I grabbed a paint brush, poured a tiny bit of rmr 86 into a plastic cup, and lightly painted it onto the top casing, still wearing gloves and goggles. It took more applications...i believe 5 or 6, but was a lot less stressful as I was using so little of the stuff and the fumes, although still bad, were no where near what spraying did. Each application, I'd let sit 15-20 mins, and I kept the paint brush and tiny bit of RMR solution in a cup in the sink so I could just grab and go each new session or dump out with running water. This worked well on the top casing as it was no where NEAR as caked as the left and right sides were, but something tells me, spraying/aerating this stuff out of the bottle must increase effectiveness, as it IS a corrosive and reacts with O2.I'd say if you're doing ANY job larger than what I described here, go Full PPE with Respirator and make SURE the room you are working out of is well ventilated and siphoned OFF from the rest of the house.If you're just squirting a few corners of your bathroom...1-2 squirts, 1 area at a time, then gloves, eye protection and lotsa of ventilation should be fine. Higher up areas, I'd recommend the paintbrush trick. And I'd personally NEVER try and spray multiple areas in the same room...I'd do 1 at a time and leave. Even a few squirts in a few areas adds up fast, and you don't want to create a potential "fume trap" by which you get a breath of lingering spray and burn your lungs/throat, etc. Not worth it!
5.0 out of 5 stars This Product Really Works. Highly Recommend.
This stuff is awesome. I had a weird crevice between my shower door/wall/ floor. Weird crevice. I had a buildup of black nasty gunk I couldn’t treat w bleach and a toothbrush scrub. Mold or mildew or the moldew combo. I sprayed this product on the affected area and pow! When I came back 15 min later it was 95% gone. Amazing. — It does have a chemical smell similar to bleach but who cares? Spray then walk away. Go chill out for a bit and come back 30 min later. And that gunk will be gone. Totally ate up mildew in the lower grout components of my shower tile too which scrubbing couldn’t handle. Great product. Highly recommend.
5.0 out of 5 stars Powerful Mold Remover That Works Instantly
I used this spray on mold in my bathroom caused by lack of ventilation, and it worked exactly as promised. The stains disappeared almost instantly with no scrubbing required. The application was simple, and the results were noticeable right away. All I had to do was spray the problem areas and let it sit and do its job.For safety purposes, I opened my bathroom window first, grabbed some goggles and gloves, wrapped my hair, and then I sprayed. Since I was spraying the bathroom ceiling, I wanted to protect myself as much as possible. Also, the smell is strong, maybe as strong as a bleach smell, but make sure to open a window first.It’s rare to find a product that works this well, but this one truly does.
4.0 out of 5 stars Works well
This works very well to remove mildew stains from my shower. It is very strong. My complaint is that the sprayer will stop working well and it often leaks.
5.0 out of 5 stars Amazing and fast working!
This product is amazing!!!! Removed all bathroom mold on ceiling and walls. Super strong odor. Wear mask and eye protection!!! Have plenty of ventilation!!!
5.0 out of 5 stars Product works !!
I bought this for one purpose, and that was to remove some mold in the shower it worked and as I looked for other areas where this could work, it removed all the discoloration on my outdoor plastic patio furniture, and I had some limestone that had very black weathering on my outdoor balcony, and I tried this product on the stone and it removed the black mildew Very surprised this worked on stone and the outcome was very similar to power washing it. the odor is strong. You have to be prepared well ventilated area You also have to make sure that you fully rinse anything that you used it on otherwise the smell will linger and the texture will feel off and it will continue to penetrate whatever surface it’s on so flush with water well after use, but it’s a winner.
5.0 out of 5 stars Extremely Effective — Makes Bathroom Cleaning Effortless
This cleaning spray has been a game-changer for keeping my bathroom clean. I’ve struggled with stubborn mold and mildew stains around grout and corners for years, and this spray works almost instantly without scrubbing.Application is simple: spray directly on the affected areas, wait a few minutes, and the stains fade away. The formula is powerful enough to tackle tough discoloration on shower floors, tiles, and bathroom walls. Even long-standing, dark mildew spots became noticeably lighter after a single treatment.I also appreciate that it doesn’t require aggressive scrubbing or harsh tools, which makes the cleaning process faster and less messy. It has a mild scent compared to traditional mold removers, which makes it much more pleasant to use indoors.Overall, this spray is powerful, convenient, and reliable. It makes cleaning mold and mildew virtually effortless, and I’ll definitely continue keeping it on hand for bathroom maintenance.
5.0 out of 5 stars This stuff really worked for me. Another satisfied customer!!
I really wish I would have taken a before and after picture. But I was just excited to see if it worked. And it DID!!! OMG, the mold on our shower tiles, gone, stain on our shower curtain, gone. A little pricey, but definitely worth it. I had no issue with the spray it came with. It worked great. I will be getting more to work on my outside fence. I will post before and after on that project for sure.
Super strong AND effective
This smells just as it should because it DOES THE JOB. Killed stubborn mould without touching or scrubbing. Very strong But it did smell which is understandable. Did it in the morning and left windows open all day. Expensive but it did the job so was definitely good value instead of wasting money again on a cheaper product that’s less effective
Did not do anything like it suggested or what phots dippicted
It promises to remove mildew stains from concrete and stucco. We followed the directions exactly and it made absolutely no difference. I wasted $90. I got better results with vinegar. Very dissatisfied.
Works as advertised
Great product and to be honest it blew me away with how effective it was. Removed all the mold and did not leave any stains. I would advise to wear a mask as it is quite strong and does produce a lot fumes which can be quite irritating
Great product!
Works wonders in munites!
Spray Nozzle? Spray Nozzle?
Pro:•Straight off the bat, this stuff is awesome, it shifts the mold in seconds.Con:•It's a bit of a hefty price and then they don't even supply a spray nozzle 🤦🏼♂️. Come on guys, WTF?•Your house will smell like a swimming baths once you use it, so keep windows and doors open to help dissipate the smell.•When you buy a replacement nozzle and/or an entire new bottle, make sure it doesn't leak beforehand as you really don't want this stuff on your skin........ or just wear gloves.
Similar suggestions by Bolo
More from this brand
Similar items from “Mold & Mildew Removers”
Share with
Or share with link
https://www.bolo.ae/products/UO01A3L22X4