Description:
Side cutters, fine / pointed, plastic 300074123 black, handle length approx.: 115 mm.Not suitable for children under 14 years.The packaging must be kept as it contains important information.The illustrations may differ from the actual product.Carson reserves the right to make improvements and changes at any time.
Reviews:
5.0 out of 5 stars 10/10 would buy again
(function() { P.when('cr-A', 'ready').execute(function(A) { if(typeof A.toggleExpanderAriaLabel === 'function') { A.toggleExpanderAriaLabel('review_text_read_more', 'Read more of this review', 'Read less of this review'); } }); })(); .review-text-read-more-expander:focus-visible { outline: 2px solid #2162a1; outline-offset: 2px; border-radius: 5px; } Best snippers I’ve ever owned! Very sharp and accurate. Worth every penny.
5.0 out of 5 stars Recommended
Outstanding. Cuts through sprues like butter
5.0 out of 5 stars 3 years and still like new.
These are great sprue snippers. Cut clean and are sharp 3 years later. Some have complained of the lack of durability, but I have not had that issue. I believe they are cutting plastic that is too thick or maybe wire. These are for cutting near the part being removed from the sprue. If I want to cut thicker plastic, I used my wire cutters. If you follow these rules, these nippers will last you a long time. I wouldn't hesitate to buy these again.
5.0 out of 5 stars Cut Sprue with the best
Whoa, these are really nice. Precision instrument, sharp and perfect for intricate work.
5.0 out of 5 stars Best nippers on the market for miniatures
Absolutely a level above other nippers like GW or Army Painters. Goes through plastic smooth like butter and leaves almost no stress marks on my minis
5.0 out of 5 stars Best side cutters for your plastic models for the price
These cut through plastic frames like butter and leave a clean edge.I had been using cheap side cutters for several years, and they eventually lost their edge and started to chip, so I bought these on sale (like half off).They have a smaller rubber handle than my old ones, but still fit fine in the palm of my hand. If you have exceptionally large hands, they might be a bit small for you and you might want to try the Citadel ones or larger specialized ones.They're forged steel with a flat edge so you can cut relatively close to your model without leaving significant scarring, but I would still not cut them flush to harder plastic models. You're probably okay cutting pretty close to Bandai's plastics, as they're softer than those used by some other model companies, but it's still best to leave a little bit off the sprue left on the model so you can trim manually.They cut through GW, Parabellum and Bandai sprues with ease. I would not recommend using these on metal or 3d printed models (cast resin is usually softer than 3d printed UV resin, so that's ok to cut thin gates, not the thick ones though), and never use them on steel wire, they will likely chip or lose their edge way too fast. Not advised to cut through the frames themselves, just the gates, as I'm not sure what thickness they are designed for, but 4mm thick plastic might be a little much for them.
4.0 out of 5 stars Workhorse. Best value on the market.
Review #2Just wanted to give a quick update. Since my first review I went ahead and added Dspiae 3.0 nippers and USAGUNDAMSTORE nippers to my plastic model toolbox. Tamiya's nipper is best all around.GodHand SPN-120 is still the best but most fragile.USAGUNDAMSTORE's nipper probably comes in second for leaving the least amount of stress on the cut.DSPIAE 3.0 nippers I was very disappointed with. They are high quality and they even give you a leather tip protector that has a button to snap close to protect the blades but it's hard for me to get a flush cut with them for some reason. They cut as well as GH but the fact that I can get them to cut flush with the surface is aggravating.Review #1I have only had two other Nippers before I purchased this product. My first was a no name cheap pair that was purchased as a tool set for model building. Then I decided to purchase the coveted Godhand SPN-120. There is indeed quite a bit of difference between these two. The Godhand (GH) has a wayyy thinner tip, one bladed (think of it as a guillotine and a very short blade. Tamiya's nippers on the other hand have noticeably thicker blades, longer blade's (yes, that's plural) and blades that cut from each side. In our lives, more is typically better. However, when it comes to nippers, it rarely is.When comparing Tamiya nippers vs GH, ultimately GH has a cleaner cut, the exact same cut you'd have using an Hobby Knife . Regardless, it all comes down to how much you're willing to spend, your thoughts on how much of a stress mark you're willing to live with and how much you're willing to risk. I've seen GH nippers selling for $45 nowadays online. I purchased mine at $50. However, they are super easy to break (this is why I purchased these).If they would sell at around $40, I'd purchase them again. All nippers will leave a stress mark after a cut. Tamiya's nipper feels and without a doubt is much more durable. If you airbrush, having a high quality nipper isn't really a must have for you since you'll likely be sanding anyway and then painting over any stress mark. If you're doing just a straight build and have the patience to methodically cut with GH's so not to break the blade I'd recommend GH. Tamiya's nipper however is a workhorse, inexpensive, and much more durable.The verdict for me is to use these on models I plan on airbrushing and GH for models that are straight build. This will certainly lengthen the GH sharpness. I would reccomend Tamiya's nippers to anyone who is new to plastic model making as they are much more durable and half the price compared to GH.
5.0 out of 5 stars Razor sharp
I love em for modeling but am trying to prolong their life by using them selectively. On large or less fragile parts I still use a pair of older zurons and a bit of sanding. I’m using these for those extremely fragile bits. One thing to be aware of is that the handles are not as grippy as they appear and I’ve almost dropped them several times. If you take a look at the blades you’ll see why they would probably not survive many falls.
Tamiya, une valeur sûre.
(function() { P.when('cr-A', 'ready').execute(function(A) { if(typeof A.toggleExpanderAriaLabel === 'function') { A.toggleExpanderAriaLabel('review_text_read_more', 'Read more of this review', 'Read less of this review'); } }); })(); .review-text-read-more-expander:focus-visible { outline: 2px solid #2162a1; outline-offset: 2px; border-radius: 5px; } Petite pince Tamiya indispensable pour du Gunpla. Précise et efficace.Certes le prix est un peu élevé, mais la qualité a un prix et il vaut mieux investir plutôt que d’acheter une pince bon marché qui pourrait gâcher votre expérience des model kits.Parfaite pour des découpes propres.
Oldukça Kullanışlı
Elimde standart yan keskiden vardı. Fakat onunda model ağacına çok yakın olan parçaları kesmekte zorlanıyordum. En son yaptığım modelde de iyice uğraşmam gereken bir parça olduğundan sipariş verdim. Normal yan keskiye göre boyu da kesici ağzı da oldukça ufak. Ağız çok ince olduğundan da kesme işlemi çok iyi. Ayrıca ufak temizliklerde de kullanabilirsiniz.
Montar gunplas cambia con esto
Mis dos primeros gundam los monté cortando con unos alicates de los chinos, porque me apetecía mucho empezar y no sabía dónde me metía. Os podéis imaginar el resultado. Los he ido puliendo después, pero ha llevado el doble de trabajo. Después de eso, me pillé un pack en Bolo por 15 euros que traía unos alicates, unas lijas y demás cosas, más o menos fue útil, mejoró la experiencia, pero no encontraba la perfección que buscaba. Así que me puse a investigar a fondo, a ver vídeos, comprobar cómo quedaba cuando lo hacía un profesional. Y casi todos decían lo mismo: GodHand o Tamiya.Bien, Tamiya es más barato y por tanto me decanté por este para probar la diferencia. Y sí... Cuando los alicates son buenos, cuando el corte es tan preciso, cuando cortar el plástico parece mantequilla, todo cambia, todo mejora.¿Lo recomiendo? Por supuesto, vas a notar la diferencia nada más usarlo, ya no podrás volver a otros. El corte es tan limpio y veloz que te ahorra muchísimo tiempo. Cierto es que 30 euros no son baratos y que te lo vas a pensar más de una vez, pero si tu idea es continuar con este hobby, no lo dudes, porque a la larga vas a ganar.
Überzeugt in allen Belangen
Bislang nutzte ich Elektronik Seitenschneider und fragte mich:"Was soll daran besser sein?"EIn Tag mit dem Seitenschneider von tamiya und ich war überzeugt: Der ist besser und sein Geld Wert!Die Abschnitte sind glatter, ich bekomme mehr vom Gusszweig ab und spare bei der mühseeligen Nacharbeit.(Andere mögen das als Kontemplative Meditation sehen, ich finde es so langweilig wie ermüdend)Daher kann ich diese Seitenschneider für alle Modellbauer wirklich nur empfehlen.Mal lieber ein Modell weniger bauen, aber richtiges Werkzeug.
sharp
I havent used a gh, but i know this tamiya cutter cuts plastic like hot knife on butter. great for my gunpla model kits with less the price of a gh. highly recommended.
Visit the TAMIYA Store
Tamiya Sharp Pointed Side Cutter NO.123 (74123)
AED18291
Quantity:
Order today to get by 7-14 business days
Delivery fee of AED 20. Free for orders above AED 200.
Imported From: United States
At BOLO, we work hard to ensure the products you receive are new, genuine, and sourced from reputable suppliers.
BOLO is not an authorized or official retailer for most brands, nor are we affiliated with manufacturers unless specifically stated on a product page. Instead, we source verified sellers, authorized distributors or directly from the manufacturer.
Each product undergoes thorough inspection and verification at our consolidation and fulfilment centers to ensure it meets our strict authenticity and quality standards before being shipped and delivered to you.
If you ever have concerns regarding the authenticity of a product purchased from us, please contact Bolo Support. We will review your inquiry promptly and, if necessary, provide documentation verifying authenticity or offer a suitable resolution.
Your trust is our top priority, and we are committed to maintaining transparency and integrity in every transaction.
All product information, images, descriptions, and reviews originate from the manufacturer or from trusted sellers overseas. BOLO is not affiliated with, endorsed by, or an authorized retailer for most brands listed on our website unless stated otherwise.
While we strive to display accurate information, variations in packaging, labeling, instructions, or formulation may occasionally occur due to regional differences or supplier updates. For detailed or manufacturer-specific information, please contact the brand directly or reach out to BOLO Support for assistance.
Unless otherwise stated, all prices displayed on the product page include applicable taxes and import duties.
BOLO operates in accordance with the laws and regulations of United Arab Emirates. Any items found to be restricted or prohibited for sale within the UAE will be cancelled prior to shipment. We take proactive measures to ensure that only products permitted for sale in United Arab Emirates are listed on our website.
All items are shipped by air, and any products classified as “Dangerous Goods (DG)” under IATA regulations will be removed from the order and cancelled.
All orders are processed manually, and we make every effort to process them promptly once confirmed. Products cancelled due to the above reasons will be permanently removed from listings across the website.
Similar suggestions by Bolo
More from this brand
Similar items from “Side-Cutting Pliers”
Share with
Or share with link
https://www.bolo.ae/products/UO010CT73W4
Visit the TAMIYA Store
Tamiya Sharp Pointed Side Cutter NO.123 (74123)
AED18291
Quantity:
Order today to get by 7-14 business days
Delivery fee of AED 20. Free for orders above AED 200.
Imported From: United States
At BOLO, we work hard to ensure the products you receive are new, genuine, and sourced from reputable suppliers.
BOLO is not an authorized or official retailer for most brands, nor are we affiliated with manufacturers unless specifically stated on a product page. Instead, we source verified sellers, authorized distributors or directly from the manufacturer.
Each product undergoes thorough inspection and verification at our consolidation and fulfilment centers to ensure it meets our strict authenticity and quality standards before being shipped and delivered to you.
If you ever have concerns regarding the authenticity of a product purchased from us, please contact Bolo Support. We will review your inquiry promptly and, if necessary, provide documentation verifying authenticity or offer a suitable resolution.
Your trust is our top priority, and we are committed to maintaining transparency and integrity in every transaction.
All product information, images, descriptions, and reviews originate from the manufacturer or from trusted sellers overseas. BOLO is not affiliated with, endorsed by, or an authorized retailer for most brands listed on our website unless stated otherwise.
While we strive to display accurate information, variations in packaging, labeling, instructions, or formulation may occasionally occur due to regional differences or supplier updates. For detailed or manufacturer-specific information, please contact the brand directly or reach out to BOLO Support for assistance.
Unless otherwise stated, all prices displayed on the product page include applicable taxes and import duties.
BOLO operates in accordance with the laws and regulations of United Arab Emirates. Any items found to be restricted or prohibited for sale within the UAE will be cancelled prior to shipment. We take proactive measures to ensure that only products permitted for sale in United Arab Emirates are listed on our website.
All items are shipped by air, and any products classified as “Dangerous Goods (DG)” under IATA regulations will be removed from the order and cancelled.
All orders are processed manually, and we make every effort to process them promptly once confirmed. Products cancelled due to the above reasons will be permanently removed from listings across the website.
Description:
Side cutters, fine / pointed, plastic 300074123 black, handle length approx.: 115 mm.Not suitable for children under 14 years.The packaging must be kept as it contains important information.The illustrations may differ from the actual product.Carson reserves the right to make improvements and changes at any time.
Reviews:
5.0 out of 5 stars 10/10 would buy again
(function() { P.when('cr-A', 'ready').execute(function(A) { if(typeof A.toggleExpanderAriaLabel === 'function') { A.toggleExpanderAriaLabel('review_text_read_more', 'Read more of this review', 'Read less of this review'); } }); })(); .review-text-read-more-expander:focus-visible { outline: 2px solid #2162a1; outline-offset: 2px; border-radius: 5px; } Best snippers I’ve ever owned! Very sharp and accurate. Worth every penny.
5.0 out of 5 stars Recommended
Outstanding. Cuts through sprues like butter
5.0 out of 5 stars 3 years and still like new.
These are great sprue snippers. Cut clean and are sharp 3 years later. Some have complained of the lack of durability, but I have not had that issue. I believe they are cutting plastic that is too thick or maybe wire. These are for cutting near the part being removed from the sprue. If I want to cut thicker plastic, I used my wire cutters. If you follow these rules, these nippers will last you a long time. I wouldn't hesitate to buy these again.
5.0 out of 5 stars Cut Sprue with the best
Whoa, these are really nice. Precision instrument, sharp and perfect for intricate work.
5.0 out of 5 stars Best nippers on the market for miniatures
Absolutely a level above other nippers like GW or Army Painters. Goes through plastic smooth like butter and leaves almost no stress marks on my minis
5.0 out of 5 stars Best side cutters for your plastic models for the price
These cut through plastic frames like butter and leave a clean edge.I had been using cheap side cutters for several years, and they eventually lost their edge and started to chip, so I bought these on sale (like half off).They have a smaller rubber handle than my old ones, but still fit fine in the palm of my hand. If you have exceptionally large hands, they might be a bit small for you and you might want to try the Citadel ones or larger specialized ones.They're forged steel with a flat edge so you can cut relatively close to your model without leaving significant scarring, but I would still not cut them flush to harder plastic models. You're probably okay cutting pretty close to Bandai's plastics, as they're softer than those used by some other model companies, but it's still best to leave a little bit off the sprue left on the model so you can trim manually.They cut through GW, Parabellum and Bandai sprues with ease. I would not recommend using these on metal or 3d printed models (cast resin is usually softer than 3d printed UV resin, so that's ok to cut thin gates, not the thick ones though), and never use them on steel wire, they will likely chip or lose their edge way too fast. Not advised to cut through the frames themselves, just the gates, as I'm not sure what thickness they are designed for, but 4mm thick plastic might be a little much for them.
4.0 out of 5 stars Workhorse. Best value on the market.
Review #2Just wanted to give a quick update. Since my first review I went ahead and added Dspiae 3.0 nippers and USAGUNDAMSTORE nippers to my plastic model toolbox. Tamiya's nipper is best all around.GodHand SPN-120 is still the best but most fragile.USAGUNDAMSTORE's nipper probably comes in second for leaving the least amount of stress on the cut.DSPIAE 3.0 nippers I was very disappointed with. They are high quality and they even give you a leather tip protector that has a button to snap close to protect the blades but it's hard for me to get a flush cut with them for some reason. They cut as well as GH but the fact that I can get them to cut flush with the surface is aggravating.Review #1I have only had two other Nippers before I purchased this product. My first was a no name cheap pair that was purchased as a tool set for model building. Then I decided to purchase the coveted Godhand SPN-120. There is indeed quite a bit of difference between these two. The Godhand (GH) has a wayyy thinner tip, one bladed (think of it as a guillotine and a very short blade. Tamiya's nippers on the other hand have noticeably thicker blades, longer blade's (yes, that's plural) and blades that cut from each side. In our lives, more is typically better. However, when it comes to nippers, it rarely is.When comparing Tamiya nippers vs GH, ultimately GH has a cleaner cut, the exact same cut you'd have using an Hobby Knife . Regardless, it all comes down to how much you're willing to spend, your thoughts on how much of a stress mark you're willing to live with and how much you're willing to risk. I've seen GH nippers selling for $45 nowadays online. I purchased mine at $50. However, they are super easy to break (this is why I purchased these).If they would sell at around $40, I'd purchase them again. All nippers will leave a stress mark after a cut. Tamiya's nipper feels and without a doubt is much more durable. If you airbrush, having a high quality nipper isn't really a must have for you since you'll likely be sanding anyway and then painting over any stress mark. If you're doing just a straight build and have the patience to methodically cut with GH's so not to break the blade I'd recommend GH. Tamiya's nipper however is a workhorse, inexpensive, and much more durable.The verdict for me is to use these on models I plan on airbrushing and GH for models that are straight build. This will certainly lengthen the GH sharpness. I would reccomend Tamiya's nippers to anyone who is new to plastic model making as they are much more durable and half the price compared to GH.
5.0 out of 5 stars Razor sharp
I love em for modeling but am trying to prolong their life by using them selectively. On large or less fragile parts I still use a pair of older zurons and a bit of sanding. I’m using these for those extremely fragile bits. One thing to be aware of is that the handles are not as grippy as they appear and I’ve almost dropped them several times. If you take a look at the blades you’ll see why they would probably not survive many falls.
Tamiya, une valeur sûre.
(function() { P.when('cr-A', 'ready').execute(function(A) { if(typeof A.toggleExpanderAriaLabel === 'function') { A.toggleExpanderAriaLabel('review_text_read_more', 'Read more of this review', 'Read less of this review'); } }); })(); .review-text-read-more-expander:focus-visible { outline: 2px solid #2162a1; outline-offset: 2px; border-radius: 5px; } Petite pince Tamiya indispensable pour du Gunpla. Précise et efficace.Certes le prix est un peu élevé, mais la qualité a un prix et il vaut mieux investir plutôt que d’acheter une pince bon marché qui pourrait gâcher votre expérience des model kits.Parfaite pour des découpes propres.
Oldukça Kullanışlı
Elimde standart yan keskiden vardı. Fakat onunda model ağacına çok yakın olan parçaları kesmekte zorlanıyordum. En son yaptığım modelde de iyice uğraşmam gereken bir parça olduğundan sipariş verdim. Normal yan keskiye göre boyu da kesici ağzı da oldukça ufak. Ağız çok ince olduğundan da kesme işlemi çok iyi. Ayrıca ufak temizliklerde de kullanabilirsiniz.
Montar gunplas cambia con esto
Mis dos primeros gundam los monté cortando con unos alicates de los chinos, porque me apetecía mucho empezar y no sabía dónde me metía. Os podéis imaginar el resultado. Los he ido puliendo después, pero ha llevado el doble de trabajo. Después de eso, me pillé un pack en Bolo por 15 euros que traía unos alicates, unas lijas y demás cosas, más o menos fue útil, mejoró la experiencia, pero no encontraba la perfección que buscaba. Así que me puse a investigar a fondo, a ver vídeos, comprobar cómo quedaba cuando lo hacía un profesional. Y casi todos decían lo mismo: GodHand o Tamiya.Bien, Tamiya es más barato y por tanto me decanté por este para probar la diferencia. Y sí... Cuando los alicates son buenos, cuando el corte es tan preciso, cuando cortar el plástico parece mantequilla, todo cambia, todo mejora.¿Lo recomiendo? Por supuesto, vas a notar la diferencia nada más usarlo, ya no podrás volver a otros. El corte es tan limpio y veloz que te ahorra muchísimo tiempo. Cierto es que 30 euros no son baratos y que te lo vas a pensar más de una vez, pero si tu idea es continuar con este hobby, no lo dudes, porque a la larga vas a ganar.
Überzeugt in allen Belangen
Bislang nutzte ich Elektronik Seitenschneider und fragte mich:"Was soll daran besser sein?"EIn Tag mit dem Seitenschneider von tamiya und ich war überzeugt: Der ist besser und sein Geld Wert!Die Abschnitte sind glatter, ich bekomme mehr vom Gusszweig ab und spare bei der mühseeligen Nacharbeit.(Andere mögen das als Kontemplative Meditation sehen, ich finde es so langweilig wie ermüdend)Daher kann ich diese Seitenschneider für alle Modellbauer wirklich nur empfehlen.Mal lieber ein Modell weniger bauen, aber richtiges Werkzeug.
sharp
I havent used a gh, but i know this tamiya cutter cuts plastic like hot knife on butter. great for my gunpla model kits with less the price of a gh. highly recommended.
Similar suggestions by Bolo
More from this brand
Similar items from “Side-Cutting Pliers”
Share with
Or share with link
https://www.bolo.ae/products/UO010CT73W4