Choose your country
Delivery choices and times vary depending on your location
Description:
About this item:
Choose from our 6”, 13”, 18”, or 24” magnetic tool holder to help clean up and organize your work station. These heavy-Duty, permanently magnetized assemblies hold large or small tools and metal parts securely in place. Perfect for workshops, garages, manufacturing facilities, and inside your truck or van. When mounted, these holders are held firmly in place by welded tabs, with 1/4” holes for mounting screws (included). Master Magnetics was founded in 1976 and is currently located in Castle Rock, Colorado. We manufacture and distribute magnetic products for commercial, industrial, and consumer use.
Review:
4.9 out of 5
98.46% of customers are satisfied
5.0 out of 5 stars HOLY MAGNETISM! About as heavy duty as a magnetic tool holder gets!
These Master Magnetics AMC18PLC Magnetic Tool Holders are AMAZING. They cost a little more than cheaper competing products, but the magnetic holding force is far superior. In fact, if you have a tool that has a lot of metal surface area, such as a Kreg Pocket Hole Clamp, the magnets are TOO powerful, and I would worry that wrenching the clamp free would overstress the mounting screws. That said, the holding power is perfect for chisels, screwdrivers, wrenches, and other such common items. I have mine mounted on a rolling cart, which is why I was concerned to find some really powerful magnets. Now I can roll over bumps or jostle the cart very hard and not have to worry about anything falling off. In fact, when I first received these, I attached a full suite of wrenches and chisels and shook the entire bar at arms length... Nothing happened! Not a hint of movement from any tool! Simply awesome.This particular bar is 18" long, which is perfect for my needs, since I'm mounting it in an 18.5" wide space and in my experience, it is good to leave a little extra space (1/4") at either end of the bar so that attached tools don't get crowded by the sides of your cabinet/cart/corner wall. Having handled two of these now myself, I can attest they really do seem to have 20 lbs. of holding force PER INCH. Also, I now understand what other reviewers mentioned about the red stripe. It is indeed just a thin strip of red electrician's tape, but cleanly applied and recessed deeply enough that it MAY last; however, it is not especially durable and will tear or abrade easily if you mount any kind of tool with a protrusion that can reach or rub against it (I'm not sure what that would be... maybe a hand saw or coping saw with a small side screw adjustment that can reach between the bars). Obviously, the red tape is there to hide the series of magnets sandwiched between the top and bottom metal plates. (Those magnets are plainly visible on the backside.) It would be easy enough to replace the tape if damaged, and frankly, I don't mind if the stripe doesn't hold up. Even with exposed magnets, I think it will look fine in a workshop. It's not going over the mantle. I only mention it in case it does matter to others.All in all, I can't imagine a better magnetic tool holder. Aside from the red tape issue--which doesn't bother me--the only other concern I can think of is that the magnets may be too powerful for some people's tastes. As I mentioned above, large surface area tools can clamp on with quite a bit of force, so I would not recommend this for large flat metal surfaces like some heavy duty clamps, nor for precision tools like a calipers or steel framing square since the force may cause minor deflection when attaching/removing those tools that then throws off their precision. For everything else, these are ideal. If I were going to improve one thing, I think I would place the mounting holes inside the bar "sandwich" (i.e., through the center of the red stripe) to give it a cleaner look without the protruding mounting tabs. No big deal though. Since I'm mounting mine low down on the face of a cart, I flipped them upside down (versus the picture) so you don't see the tabs from normal standing eye level anyway.Very highly recommended!
5.0 out of 5 stars Powerful, worth the extra cost
There are cheaper alternatives on Bolo, but I decided to spring for this and am very satisfied. The magnets are very very strong. I use it to hold tools, but after someone came to replace my gutters, I hooked some rope to both ends (where the holds to fasten them are) and created a way to pull the bar across my lawn - and I was able to pick up 10+ screws and nails that they left behind and would have otherwise been impossible to find until I'd step on them.
5.0 out of 5 stars Good quality
I installed the silver / chrome version of this bar yesterday and it seems to be a good, well-made product. My only qualms are that 1) I didn’t love the color options (chrome + red or black + yellow) so I removed the thin red tape on mine and replaced it with a better quality piece of grey gaffers tape. See attached pic. Also, 2) it comes with two flat head screws. Who uses those anymore? I used my own #10 screws for the install. If I could give the product a 4.5 rating I would but it’s still a good product so I rounded up and gave it a 5.
5.0 out of 5 stars Strong magnetic hold
This bar has a strong magnetic pull that holds the tools tightly. It easily supports tools of decent weight, like a hammer, crowbar, pliers, etc.It does what it says well and I would recommend this product.
4.0 out of 5 stars Strong magnet, well made 6" holder. Just throw away the screws that come with it.
Although it has regular ceramic magnets, it holds tools very well unlike the vast majority of this type of magnetic holders. It's is made accurately, works well and is quite attractive.The only thing that left a bad taste in my mouth was the type of screws that were included. They are flat head (slot) and require straight blade screwdriver. Anybody who can hold a screwdriver understands how ridiculous it is to use this type of fastener when there are hex, Phillips, Robertson, Torx, etc around for decades. And to complicate things futher, the screws are made of a ferrous alloy, so using them near a strong magnet adds to the excitement. So just throw those screws away and use something more user friendly.I think the manufacturer hurts its own reputation by something that doesn't even cost extra to be decent.
5.0 out of 5 stars better than i expected
very powerful product.
5.0 out of 5 stars Really strong magnetic tool holder.
I use magnetic strips a lot for tool holding. These are really string and hold fairly heavy tools well. Great value, and with several lengths available, can "fill" any linear space for a comprehensive tool mount.
5.0 out of 5 stars Magnetic tool holder
Very strong magnetic tool holder
Great holding power
I put this product the hold my turning tools. Outstanding holding power, my tools held very securely and easily accessible. Highly recommended!
Good Strong Magnets for Holding Tools
Really strong magnets are good for holding tools. Recommended. Could do without the bright yellow colored tape, tho.
Great quality product at a great price!
Received the Product and it matches the seller's description. The magnet stip is very strong and very easy to install with the supplied hardware (they're slotted screws; some people don't like to use them but with the proper screwdriver or bit, it's no problem).Serves it purpose very well and happy with the purchase!
Works great and even the hammers stick with no problems!
Looking for a magnet to mount on your wall and stick your tools on? You want this one.Strongest magnet I could find and holds everything including my hammer and wrench collection.
Perfect
I used into my wall into my toolbox
Visit the Master Magnetics Store
Master Magnetics 24” Heavy-Duty Magnetic Tool Holder - Easy Install, 20 lb. per inch Pull Force, Black Powder Coat with Yellow Stripe, AM1PLC
AED22355
Quantity:
|
Order today to get by
Free delivery on orders over AED 200
Product origin: United States
Electrical items shipped from the US are by default considered to be 120v, unless stated otherwise in the product description. Contact Bolo support for voltage information of specific products. A step-up transformer is required to convert from 120v to 240v. All heating electrical items of 120v will be automatically cancelled.
All product information listed on the site are from 3rd party sources, including images and reviews. bolo.ae is not liable for any claims or promotions mentioned on the product description or images with textual content. For detailed product information, please contact the manufacturer or Bolo support by logging into your account. Unless stated otherwise during checkout, all import taxes and duty are included in the price mentioned on the product page. bolo.ae follows the rules and regulations of sale in United Arab Emirates and will cancel items in an order that are illegal for sale in United Arab Emirates. We take all the necessary steps to ensure only products for sale in United Arab Emirates are displayed. Product stock and delivery estimate may change with the seller even after placing the order. All items are shipped by air and items marked “Dangerous Goods (DG)” by the IATA will be cancelled from orders. We strive to process your order as soon as it is finalized.
Similar suggestions by Bolo
More from this brand
Similar items from “Tool Holders”
Share with
X
Or share with link
https://bolo.com/