Description:
The Microdial Tapering Jig By Microjig Helps You Achieve Cutting Edge Tapers. You Will Be Able To Create Tapered Legs With Up To Eight Tapered Sides. Meanwhile, Tapers Can Be Cut From An Infinite Range Between 0˚ To 10˚ With 1/8˚ Incremental Stops. You Can Also Adjust Tapers Between 0 To 2 Inchers With 1/16 Inch Intervals. Once Decided, The Two Adjustable Dials Then Will Lock Into Your Preferred Configuration, And Lock The Two Memory Locks To Allow Easy Repetitive Cuts Of The Same Taper. The Microdial Comes With An Instructional Dvd And Instruction Manual. Combine The Microdial With Your Grr-Ripper Advanced Model (Sold Separately) To Enhance Your Safety And Woodworking. The Addition Of The Grr-Ripper Will Allow Users To Pressure In Three Dimensions: Downward, Inward, And Forward; This Will Virtually Eliminate Kickback And Should Always Be Used When Cutting Narrow Or Small Work Pieces. Made In The Usa. Watch The Action Video!
Reviews:
5.0 out of 5 stars Works - And Then Some
I've just started woodworking, and made my own tapering jig. Yeah, it didn't work. So I made another one. That one didn't work either. Before I blamed the wood, or the saw, I thought I'd go ahead and try this jig. Watched several YouTube videos. I made four table legs, tapered, first time out. And they were perfect. Not ok, not almost ok. Perfect. This jig made it SO easy. I watched the DVD, read the directions, used an online calculator to figure out the degrees to set it to - and the legs turned out well. I'd HIGHLY recommend this jig - it's incredibly versatile. I' also used it to cut straight edges on boards for gluing together - and it works great at that as well. While I admire the folks that can make their own jigs, while I'm learning the process, it's nice to have something that just works. Will I try to make my own jig again in the future? Probably not - why would I when this works so well. I've been using mine for over a month now - and it just works - consistent, repeatable cuts. Stop thinking about it - just get it. You won't regret it. But do - please - watch the DVD - it's worth the 15 minutes or so, and you can always go back and watch the section you need.
5.0 out of 5 stars Great
Making a changing table and it required tapered legs. I bought this and works great ! This company just puts out great stuff for woodworkers
4.0 out of 5 stars Works better with two grrr-rippers
Works better with two grrr-rippers. Find myself incorporating tapers into every project to just the expense and space this takes up. Very easy to use.
5.0 out of 5 stars Well worth the cost in precision and safety
Why did you pick this product vs others?:Watch the YouTube videos on this one. They all love it, and you will too.Sure, I built my own. Sure, I used the cheap one on the rack at Woodcraft and Rockler.This one is FAR more precise and, with the GRRIPPER push block, Rock solid and safe.Pleasure to use.
5.0 out of 5 stars Tapering Jig
After purchasing the grr-ripper and liking it , I dropped $130 on this piece of molded plastic (against my better judgment).Well...It was money well spent, this thing in it's simplicity is awesome. I assembled this and proceeded to what I thought would ruin a fantastic piece of Chechen, I had 4 -18"X6"X3/4 pieces cut from a single board. I set my blade bevel at 45 deg. and set the taper jig at 5 deg and ripped four pieces what I came up with was a tapered pyramid , with all 4 sides fitting perfect . I've tried tapers like this before on the two piece metal square stock and wing nut junk and never had any accuracy to brag about..This thing costly as it is in my opinion is worth it ...now off to cut some segmented staves for turning!
5.0 out of 5 stars Solid well built taper jig.
I recently bought this taper jig, and have used it a few times. I should have bought this years ago, instead of building multiple taper jigs. It is easy to use and has a range of options, that I might not use, but are great to have available. I am a big fan of this jig, and can see using it for years.
5.0 out of 5 stars Quick setup
If you have never used any other tapering jig you might think all jigs are as versatile as the MicroJig. Believe me they're not. Using this jib made want to cut tapers in everything I was working with. On day one I just ran wood through the table saw just testing different angles for repetitiveness. Spot on every time! At first I thought the unit was a bulky but as you work with it you'll find that the size is appropriate and the extra girth is convenient while guiding the piece through the table saw. My only hesitation is/was the price. If you taper wood frequently, this is your tool. If only once in a blue moon, you might want something less expensive OR wait for a sale.
3.0 out of 5 stars Prone to error
I have used a home-made taper jig and found it a little unsafe, so that is why I bought the Microjig. The basic idea is sound enough, and the preset settings for angle and amount of drop per foot are accurate. However, to taper normal length table legs safely it is necessary to add *two* gripper push blocks. That adds considerably to the cost for what's essentially a bunch of plastic that you have to assemble yourself. More serious, though, is that the weakest link in the assembly is the process of attaching the two grippers to the taper jig. There are so many ways this can introduce error or slop in the cut, that it becomes a time consuming pain to set it all up. Even though I set up with great care and ran a test blank, I still managed to ruin a table leg on my first actual production run. So all told, it's an expensive and sloppy jig with too many bells & whistles that most of us won't use. They should have put their energy into solid design instead of accessories.
Micro jig
I build bird houses and have requests for light house bird houses the jig makes it easy to cut tappers and angels works on its own but better with gripper push block still practicing on small projects to get used to jig so far so good
Needs improvement
The writing needs to be bigger and clear
Saw table jig
Excellent quality of jig. Helps produce great results
Doesn’t work with Festool TKS80
They have put the lip in a permanent left-hand side position. Device sits gathering dust and of no use
Great
Like everyone of their products that I have bought, this is well thought out, well designed, well made and easy to use.
Visit the MICROJIG Store
MICROJIG GRR-RIPPER TJ-5000 Microdial Tapering Jig For Table Saws, Yellow
AED84937
Quantity:
Order today to get by 7-14 business days
This item qualifies for free delivery
Imported From: United States
At BOLO, we work hard to ensure the products you receive are new, genuine, and sourced from reputable suppliers.
BOLO is not an authorized or official retailer for most brands, nor are we affiliated with manufacturers unless specifically stated on a product page. Instead, we source verified sellers, authorized distributors or directly from the manufacturer.
Each product undergoes thorough inspection and verification at our consolidation and fulfilment centers to ensure it meets our strict authenticity and quality standards before being shipped and delivered to you.
If you ever have concerns regarding the authenticity of a product purchased from us, please contact Bolo Support. We will review your inquiry promptly and, if necessary, provide documentation verifying authenticity or offer a suitable resolution.
Your trust is our top priority, and we are committed to maintaining transparency and integrity in every transaction.
All product information, images, descriptions, and reviews originate from the manufacturer or from trusted sellers overseas. BOLO is not affiliated with, endorsed by, or an authorized retailer for most brands listed on our website unless stated otherwise.
While we strive to display accurate information, variations in packaging, labeling, instructions, or formulation may occasionally occur due to regional differences or supplier updates. For detailed or manufacturer-specific information, please contact the brand directly or reach out to BOLO Support for assistance.
Unless otherwise stated, all prices displayed on the product page include applicable taxes and import duties.
BOLO operates in accordance with the laws and regulations of United Arab Emirates. Any items found to be restricted or prohibited for sale within the UAE will be cancelled prior to shipment. We take proactive measures to ensure that only products permitted for sale in United Arab Emirates are listed on our website.
All items are shipped by air, and any products classified as “Dangerous Goods (DG)” under IATA regulations will be removed from the order and cancelled.
All orders are processed manually, and we make every effort to process them promptly once confirmed. Products cancelled due to the above reasons will be permanently removed from listings across the website.
Similar suggestions by Bolo
More from this brand
Similar items from “Table Saw Accessories”
Share with
Or share with link
https://www.bolo.ae/products/UO00OC7284V
Visit the MICROJIG Store
MICROJIG GRR-RIPPER TJ-5000 Microdial Tapering Jig For Table Saws, Yellow
AED84937
Quantity:
Order today to get by 7-14 business days
This item qualifies for free delivery
Imported From: United States
At BOLO, we work hard to ensure the products you receive are new, genuine, and sourced from reputable suppliers.
BOLO is not an authorized or official retailer for most brands, nor are we affiliated with manufacturers unless specifically stated on a product page. Instead, we source verified sellers, authorized distributors or directly from the manufacturer.
Each product undergoes thorough inspection and verification at our consolidation and fulfilment centers to ensure it meets our strict authenticity and quality standards before being shipped and delivered to you.
If you ever have concerns regarding the authenticity of a product purchased from us, please contact Bolo Support. We will review your inquiry promptly and, if necessary, provide documentation verifying authenticity or offer a suitable resolution.
Your trust is our top priority, and we are committed to maintaining transparency and integrity in every transaction.
All product information, images, descriptions, and reviews originate from the manufacturer or from trusted sellers overseas. BOLO is not affiliated with, endorsed by, or an authorized retailer for most brands listed on our website unless stated otherwise.
While we strive to display accurate information, variations in packaging, labeling, instructions, or formulation may occasionally occur due to regional differences or supplier updates. For detailed or manufacturer-specific information, please contact the brand directly or reach out to BOLO Support for assistance.
Unless otherwise stated, all prices displayed on the product page include applicable taxes and import duties.
BOLO operates in accordance with the laws and regulations of United Arab Emirates. Any items found to be restricted or prohibited for sale within the UAE will be cancelled prior to shipment. We take proactive measures to ensure that only products permitted for sale in United Arab Emirates are listed on our website.
All items are shipped by air, and any products classified as “Dangerous Goods (DG)” under IATA regulations will be removed from the order and cancelled.
All orders are processed manually, and we make every effort to process them promptly once confirmed. Products cancelled due to the above reasons will be permanently removed from listings across the website.
Description:
The Microdial Tapering Jig By Microjig Helps You Achieve Cutting Edge Tapers. You Will Be Able To Create Tapered Legs With Up To Eight Tapered Sides. Meanwhile, Tapers Can Be Cut From An Infinite Range Between 0˚ To 10˚ With 1/8˚ Incremental Stops. You Can Also Adjust Tapers Between 0 To 2 Inchers With 1/16 Inch Intervals. Once Decided, The Two Adjustable Dials Then Will Lock Into Your Preferred Configuration, And Lock The Two Memory Locks To Allow Easy Repetitive Cuts Of The Same Taper. The Microdial Comes With An Instructional Dvd And Instruction Manual. Combine The Microdial With Your Grr-Ripper Advanced Model (Sold Separately) To Enhance Your Safety And Woodworking. The Addition Of The Grr-Ripper Will Allow Users To Pressure In Three Dimensions: Downward, Inward, And Forward; This Will Virtually Eliminate Kickback And Should Always Be Used When Cutting Narrow Or Small Work Pieces. Made In The Usa. Watch The Action Video!
Reviews:
5.0 out of 5 stars Works - And Then Some
I've just started woodworking, and made my own tapering jig. Yeah, it didn't work. So I made another one. That one didn't work either. Before I blamed the wood, or the saw, I thought I'd go ahead and try this jig. Watched several YouTube videos. I made four table legs, tapered, first time out. And they were perfect. Not ok, not almost ok. Perfect. This jig made it SO easy. I watched the DVD, read the directions, used an online calculator to figure out the degrees to set it to - and the legs turned out well. I'd HIGHLY recommend this jig - it's incredibly versatile. I' also used it to cut straight edges on boards for gluing together - and it works great at that as well. While I admire the folks that can make their own jigs, while I'm learning the process, it's nice to have something that just works. Will I try to make my own jig again in the future? Probably not - why would I when this works so well. I've been using mine for over a month now - and it just works - consistent, repeatable cuts. Stop thinking about it - just get it. You won't regret it. But do - please - watch the DVD - it's worth the 15 minutes or so, and you can always go back and watch the section you need.
5.0 out of 5 stars Great
Making a changing table and it required tapered legs. I bought this and works great ! This company just puts out great stuff for woodworkers
4.0 out of 5 stars Works better with two grrr-rippers
Works better with two grrr-rippers. Find myself incorporating tapers into every project to just the expense and space this takes up. Very easy to use.
5.0 out of 5 stars Well worth the cost in precision and safety
Why did you pick this product vs others?:Watch the YouTube videos on this one. They all love it, and you will too.Sure, I built my own. Sure, I used the cheap one on the rack at Woodcraft and Rockler.This one is FAR more precise and, with the GRRIPPER push block, Rock solid and safe.Pleasure to use.
5.0 out of 5 stars Tapering Jig
After purchasing the grr-ripper and liking it , I dropped $130 on this piece of molded plastic (against my better judgment).Well...It was money well spent, this thing in it's simplicity is awesome. I assembled this and proceeded to what I thought would ruin a fantastic piece of Chechen, I had 4 -18"X6"X3/4 pieces cut from a single board. I set my blade bevel at 45 deg. and set the taper jig at 5 deg and ripped four pieces what I came up with was a tapered pyramid , with all 4 sides fitting perfect . I've tried tapers like this before on the two piece metal square stock and wing nut junk and never had any accuracy to brag about..This thing costly as it is in my opinion is worth it ...now off to cut some segmented staves for turning!
5.0 out of 5 stars Solid well built taper jig.
I recently bought this taper jig, and have used it a few times. I should have bought this years ago, instead of building multiple taper jigs. It is easy to use and has a range of options, that I might not use, but are great to have available. I am a big fan of this jig, and can see using it for years.
5.0 out of 5 stars Quick setup
If you have never used any other tapering jig you might think all jigs are as versatile as the MicroJig. Believe me they're not. Using this jib made want to cut tapers in everything I was working with. On day one I just ran wood through the table saw just testing different angles for repetitiveness. Spot on every time! At first I thought the unit was a bulky but as you work with it you'll find that the size is appropriate and the extra girth is convenient while guiding the piece through the table saw. My only hesitation is/was the price. If you taper wood frequently, this is your tool. If only once in a blue moon, you might want something less expensive OR wait for a sale.
3.0 out of 5 stars Prone to error
I have used a home-made taper jig and found it a little unsafe, so that is why I bought the Microjig. The basic idea is sound enough, and the preset settings for angle and amount of drop per foot are accurate. However, to taper normal length table legs safely it is necessary to add *two* gripper push blocks. That adds considerably to the cost for what's essentially a bunch of plastic that you have to assemble yourself. More serious, though, is that the weakest link in the assembly is the process of attaching the two grippers to the taper jig. There are so many ways this can introduce error or slop in the cut, that it becomes a time consuming pain to set it all up. Even though I set up with great care and ran a test blank, I still managed to ruin a table leg on my first actual production run. So all told, it's an expensive and sloppy jig with too many bells & whistles that most of us won't use. They should have put their energy into solid design instead of accessories.
Micro jig
I build bird houses and have requests for light house bird houses the jig makes it easy to cut tappers and angels works on its own but better with gripper push block still practicing on small projects to get used to jig so far so good
Needs improvement
The writing needs to be bigger and clear
Saw table jig
Excellent quality of jig. Helps produce great results
Doesn’t work with Festool TKS80
They have put the lip in a permanent left-hand side position. Device sits gathering dust and of no use
Great
Like everyone of their products that I have bought, this is well thought out, well designed, well made and easy to use.
Similar suggestions by Bolo
More from this brand
Similar items from “Table Saw Accessories”
Share with
Or share with link
https://www.bolo.ae/products/UO00OC7284V