Description:
The Starrett 3202 Series Dial Calipers provide quick, accurate measurements of O.D., I.D., and depth. It has sharp, black clear dial graduations on a satin finished bar, lock screws for sliding jaw and dial bezel, adjustable bezel, thumb-operated fine adjustment roll, hardened stainless steel bar, measuring surfaces, rack, gears, and depth rod, knife-edge contacts, positive and spring-loaded double pinion anti-backlash control. The dial caliper is the most versatile precision hand tool on the market and has been the first choice of metalworking professionals for decades. This series features a 0-6" range and .001" graduations, in fitted case.
Reviews:
5.0 out of 5 stars A quality caliper
This is one of Starrett’s Global Series vernier caliper. According to Starrett’s description of the series, the product is made outside US but under Starrett’s quality control. From the label of the box, it indicates Made in China. The inspection card inside the box has the inspector’s signature “Li”, one of most popular surnames in PR China. Nowadays quite many low leveled models if not all models of Starrett’s calipers are made in either Brazil or PR China.Usually if the manufacurer in China is still under the American company’s management and using American company-registered brand name, i.e. before the business was transferred to the Chinese merchant, the QC and sales of the product should be basically still in the American standard, at least in this case of the caliper, it’s still Starrett’s product as Starrett claims in its web that Starrett name is American made although country of origin may not be.I compared this caliper with one of my Mitutoyo calipers, 500-752-20, to measure a pair of 1-2-3 blocks. And also I checked the hardness of the jaws using Tsubosan Hardness Tester files.Measuring in small size, e.g. anything smaller than 2”, it’s accurate and on the money. Once it’s getting to bigger sizes, it may be off slightly. For example in measuring the 2” and 3” sides of those 1-2-3 blocks, it had shown a small fraction above 0 on the dial. The measure of two blocks at 2”+2” side reads 4.01”. Not bad. I would think it could be slightly off in holding a proper position of the jaws while operating this relatively larger and heavier caliper. Such small offset usually can be seen in operating the 6”-caliper when improper positioning the jaws towards the object.The hardness test on the jaws showed a hardness around 60 of Rockwell C scale. This is the same as I obtained from testing the Mitutoyo one. So this is pretty much the normal hardness for this type of caliper. For comparison, I tested a 8x12 mm HSS lathe tool bits bar, which is supposed to be a hard material used for cutting regular metals on a lathe, it had a reading of HRC 65 hardness. I also compared a test on a cheap stainless steel caliper, which had HRC 55 reading.This Starrett caliper does not only have HRC60 reading on the jaws but also at the far end of the main ruler body. This is nice and should have good resistance to scratches in the normal working conditions.It is smooth to slide although not as smooth as I get used to in using the short 6”-calipers. Probably it takes time or more uses to smooth out.The outside jaws have about 63.8 mm or 2-1/2” depth. This may be short if a measurement is desired on a diameter greater than 2-1/2” on a rod when crosssection measuring position is not accessible. The inside jaws have 22.02 mm or 0.867” depth from tip to the jaw bottom. But if eliminates the little height of the housing of the sliding case (where the dial mounted), the inside jaw depth is about 3/4”. But if the housing of the dial would be eliminated, the inside jaw depth is about 18 mm (≈0.7”). This is how deep when ID measuring can go.Final number: it weighs about 430 grams or 0.95 lbs. So once it’s fallen onto a concrete ground from a height of the work bench, it can hurt (or completely damage) itself, at least the dial face could be severely cracked.
5.0 out of 5 stars Quality and accuracy indeed
The look and feel are superlatives that cannot be ignored. Measurements are precise, as expected with a fine Starrett instrument.
5.0 out of 5 stars Good quality
Feels sturdy, works as expected
5.0 out of 5 stars Accuracy
Works amazing, I use it for metal working and it has accurately measured everything I've made measurements as small as .001 inches. Highly recommend
5.0 out of 5 stars Quality
Everything was perfect. Excellent quality. Timely, fast delivery.
4.0 out of 5 stars Starrett quality, made in China
These are typical Starrett quality calipers. No complaints. It would feel better making the purchase if they were manufactured here in the US, but unfortunately, they aren't. Came with standard red Starrett hard plastic case lined with unattached thin foam sheets inside... kinda cheap, not like the formed cases you get with 'Toyos. Thin film cover over dial only covers about a quarter size in the center, not the divisions. Also had an inspection card and little book. Would recommend for $150 ish, not $200 range. I use them daily as a machinist and they do well what I need them to.
5.0 out of 5 stars Good products at good prices
Super fast shipping, great protective packaging for delicate item.
5.0 out of 5 stars Excellent tool
I had sent it to the wrong address and it was sent back to the seller, will be purchasing it again for a Xmas present for my brother.
Very high quality.
What can I say, other than best you can buy.
Amazing!
I sent a message to seller to ask for expedited shipping and the product arrived very quickly! It was in perfect condition on arrival and well packaged. Excellent quality 👌
Accurate, but not at all pleasant to use
Had the tool calibrated at my shop and everything checked out from the box, so that's a plus. The biggest downside is that it feels absolutely awful in the hand. The thumb knob is very loose and clicky, and the unit doesn't yield the way that a mitutoyo or B&S does. It also feels very sharp- or aggressive on the thumb. Maybe I'll get used to it, but if you have any positive experience with other calipers, I'd recommend dancing with the one that brung ya.
Very exact and easy handling
Very good design and quality product
Great
Works great
Visit the Starrett Store
Starrett Dial Caliper with Adjustable Bezel and Fitted Case - White Face, 0-6" Range, +/-0.001" Accuracy, .001" Graduations - 3202-6
AED66202
Quantity:
Order today to get by 7-14 business days
This item qualifies for free delivery
Imported From: United States
At BOLO, we work hard to ensure the products you receive are new, genuine, and sourced from reputable suppliers.
BOLO is not an authorized or official retailer for most brands, nor are we affiliated with manufacturers unless specifically stated on a product page. Instead, we source verified sellers, authorized distributors or directly from the manufacturer.
Each product undergoes thorough inspection and verification at our consolidation and fulfilment centers to ensure it meets our strict authenticity and quality standards before being shipped and delivered to you.
If you ever have concerns regarding the authenticity of a product purchased from us, please contact Bolo Support. We will review your inquiry promptly and, if necessary, provide documentation verifying authenticity or offer a suitable resolution.
Your trust is our top priority, and we are committed to maintaining transparency and integrity in every transaction.
All product information, images, descriptions, and reviews originate from the manufacturer or from trusted sellers overseas. BOLO is not affiliated with, endorsed by, or an authorized retailer for most brands listed on our website unless stated otherwise.
While we strive to display accurate information, variations in packaging, labeling, instructions, or formulation may occasionally occur due to regional differences or supplier updates. For detailed or manufacturer-specific information, please contact the brand directly or reach out to BOLO Support for assistance.
Unless otherwise stated, all prices displayed on the product page include applicable taxes and import duties.
BOLO operates in accordance with the laws and regulations of United Arab Emirates. Any items found to be restricted or prohibited for sale within the UAE will be cancelled prior to shipment. We take proactive measures to ensure that only products permitted for sale in United Arab Emirates are listed on our website.
All items are shipped by air, and any products classified as “Dangerous Goods (DG)” under IATA regulations will be removed from the order and cancelled.
All orders are processed manually, and we make every effort to process them promptly once confirmed. Products cancelled due to the above reasons will be permanently removed from listings across the website.
Similar suggestions by Bolo
More from this brand
Similar items from “Dial Calipers”
Share with
Or share with link
https://www.bolo.ae/products/UO00FWNQY3T
Visit the Starrett Store
Starrett Dial Caliper with Adjustable Bezel and Fitted Case - White Face, 0-6" Range, +/-0.001" Accuracy, .001" Graduations - 3202-6
AED66202
Quantity:
Order today to get by 7-14 business days
This item qualifies for free delivery
Imported From: United States
At BOLO, we work hard to ensure the products you receive are new, genuine, and sourced from reputable suppliers.
BOLO is not an authorized or official retailer for most brands, nor are we affiliated with manufacturers unless specifically stated on a product page. Instead, we source verified sellers, authorized distributors or directly from the manufacturer.
Each product undergoes thorough inspection and verification at our consolidation and fulfilment centers to ensure it meets our strict authenticity and quality standards before being shipped and delivered to you.
If you ever have concerns regarding the authenticity of a product purchased from us, please contact Bolo Support. We will review your inquiry promptly and, if necessary, provide documentation verifying authenticity or offer a suitable resolution.
Your trust is our top priority, and we are committed to maintaining transparency and integrity in every transaction.
All product information, images, descriptions, and reviews originate from the manufacturer or from trusted sellers overseas. BOLO is not affiliated with, endorsed by, or an authorized retailer for most brands listed on our website unless stated otherwise.
While we strive to display accurate information, variations in packaging, labeling, instructions, or formulation may occasionally occur due to regional differences or supplier updates. For detailed or manufacturer-specific information, please contact the brand directly or reach out to BOLO Support for assistance.
Unless otherwise stated, all prices displayed on the product page include applicable taxes and import duties.
BOLO operates in accordance with the laws and regulations of United Arab Emirates. Any items found to be restricted or prohibited for sale within the UAE will be cancelled prior to shipment. We take proactive measures to ensure that only products permitted for sale in United Arab Emirates are listed on our website.
All items are shipped by air, and any products classified as “Dangerous Goods (DG)” under IATA regulations will be removed from the order and cancelled.
All orders are processed manually, and we make every effort to process them promptly once confirmed. Products cancelled due to the above reasons will be permanently removed from listings across the website.
Description:
The Starrett 3202 Series Dial Calipers provide quick, accurate measurements of O.D., I.D., and depth. It has sharp, black clear dial graduations on a satin finished bar, lock screws for sliding jaw and dial bezel, adjustable bezel, thumb-operated fine adjustment roll, hardened stainless steel bar, measuring surfaces, rack, gears, and depth rod, knife-edge contacts, positive and spring-loaded double pinion anti-backlash control. The dial caliper is the most versatile precision hand tool on the market and has been the first choice of metalworking professionals for decades. This series features a 0-6" range and .001" graduations, in fitted case.
Reviews:
5.0 out of 5 stars A quality caliper
This is one of Starrett’s Global Series vernier caliper. According to Starrett’s description of the series, the product is made outside US but under Starrett’s quality control. From the label of the box, it indicates Made in China. The inspection card inside the box has the inspector’s signature “Li”, one of most popular surnames in PR China. Nowadays quite many low leveled models if not all models of Starrett’s calipers are made in either Brazil or PR China.Usually if the manufacurer in China is still under the American company’s management and using American company-registered brand name, i.e. before the business was transferred to the Chinese merchant, the QC and sales of the product should be basically still in the American standard, at least in this case of the caliper, it’s still Starrett’s product as Starrett claims in its web that Starrett name is American made although country of origin may not be.I compared this caliper with one of my Mitutoyo calipers, 500-752-20, to measure a pair of 1-2-3 blocks. And also I checked the hardness of the jaws using Tsubosan Hardness Tester files.Measuring in small size, e.g. anything smaller than 2”, it’s accurate and on the money. Once it’s getting to bigger sizes, it may be off slightly. For example in measuring the 2” and 3” sides of those 1-2-3 blocks, it had shown a small fraction above 0 on the dial. The measure of two blocks at 2”+2” side reads 4.01”. Not bad. I would think it could be slightly off in holding a proper position of the jaws while operating this relatively larger and heavier caliper. Such small offset usually can be seen in operating the 6”-caliper when improper positioning the jaws towards the object.The hardness test on the jaws showed a hardness around 60 of Rockwell C scale. This is the same as I obtained from testing the Mitutoyo one. So this is pretty much the normal hardness for this type of caliper. For comparison, I tested a 8x12 mm HSS lathe tool bits bar, which is supposed to be a hard material used for cutting regular metals on a lathe, it had a reading of HRC 65 hardness. I also compared a test on a cheap stainless steel caliper, which had HRC 55 reading.This Starrett caliper does not only have HRC60 reading on the jaws but also at the far end of the main ruler body. This is nice and should have good resistance to scratches in the normal working conditions.It is smooth to slide although not as smooth as I get used to in using the short 6”-calipers. Probably it takes time or more uses to smooth out.The outside jaws have about 63.8 mm or 2-1/2” depth. This may be short if a measurement is desired on a diameter greater than 2-1/2” on a rod when crosssection measuring position is not accessible. The inside jaws have 22.02 mm or 0.867” depth from tip to the jaw bottom. But if eliminates the little height of the housing of the sliding case (where the dial mounted), the inside jaw depth is about 3/4”. But if the housing of the dial would be eliminated, the inside jaw depth is about 18 mm (≈0.7”). This is how deep when ID measuring can go.Final number: it weighs about 430 grams or 0.95 lbs. So once it’s fallen onto a concrete ground from a height of the work bench, it can hurt (or completely damage) itself, at least the dial face could be severely cracked.
5.0 out of 5 stars Quality and accuracy indeed
The look and feel are superlatives that cannot be ignored. Measurements are precise, as expected with a fine Starrett instrument.
5.0 out of 5 stars Good quality
Feels sturdy, works as expected
5.0 out of 5 stars Accuracy
Works amazing, I use it for metal working and it has accurately measured everything I've made measurements as small as .001 inches. Highly recommend
5.0 out of 5 stars Quality
Everything was perfect. Excellent quality. Timely, fast delivery.
4.0 out of 5 stars Starrett quality, made in China
These are typical Starrett quality calipers. No complaints. It would feel better making the purchase if they were manufactured here in the US, but unfortunately, they aren't. Came with standard red Starrett hard plastic case lined with unattached thin foam sheets inside... kinda cheap, not like the formed cases you get with 'Toyos. Thin film cover over dial only covers about a quarter size in the center, not the divisions. Also had an inspection card and little book. Would recommend for $150 ish, not $200 range. I use them daily as a machinist and they do well what I need them to.
5.0 out of 5 stars Good products at good prices
Super fast shipping, great protective packaging for delicate item.
5.0 out of 5 stars Excellent tool
I had sent it to the wrong address and it was sent back to the seller, will be purchasing it again for a Xmas present for my brother.
Very high quality.
What can I say, other than best you can buy.
Amazing!
I sent a message to seller to ask for expedited shipping and the product arrived very quickly! It was in perfect condition on arrival and well packaged. Excellent quality 👌
Accurate, but not at all pleasant to use
Had the tool calibrated at my shop and everything checked out from the box, so that's a plus. The biggest downside is that it feels absolutely awful in the hand. The thumb knob is very loose and clicky, and the unit doesn't yield the way that a mitutoyo or B&S does. It also feels very sharp- or aggressive on the thumb. Maybe I'll get used to it, but if you have any positive experience with other calipers, I'd recommend dancing with the one that brung ya.
Very exact and easy handling
Very good design and quality product
Great
Works great
Similar suggestions by Bolo
More from this brand
Similar items from “Dial Calipers”
Share with
Or share with link
https://www.bolo.ae/products/UO00FWNQY3T