Description:
Premium Cafelat group gaskets are made from food grade FDA silicone. Unlike regular gaskets that are made from rubber, these do not have any smell or taste whatsoever, and are easy to change since they will not bake rock hard like rubber does. If you have ever struggled to change an old gasket you cannot help but notice the awful smell and the black soot that comes off the rubber. And that is what you are potentially consuming with each drink. Cafelat has spent months testing and adjusting the material so that these have the same compression strength as rubber, but are also softer so that it is easier to create a good seal. The replica E61 groups made these days are pretty much all the same, the different machine manufacturers then use either an 8mm or an 8.5mm group gasket. This is the red, thinner 8mm gasket. The thickness of the gasket will determine the “lock-in” position of the portafilter handle. Ideally you want the handle to lock in directly towards you (6 o’clock position). If the gasket is too thin it will lock in too far. If the gasket is too thick it will not lock in enough. Please note that although the gaskets are strong under compression, you should never use a sharp tool like a screwdriver to install them. This may tear the silicone.
Reviews:
5.0 out of 5 stars Must have
(function() { P.when('cr-A', 'ready').execute(function(A) { if(typeof A.toggleExpanderAriaLabel === 'function') { A.toggleExpanderAriaLabel('review_text_read_more', 'Read more of this review', 'Read less of this review'); } }); })(); .review-text-read-more-expander:focus-visible { outline: 2px solid #2162a1; outline-offset: 2px; border-radius: 5px; } This is a must have if you have the lelit Mara x v2. I kept wondering why I couldn’t get adequate pressure out of my machine. Swapped out the cheap (cracked) stock gasket with this and have been getting insane shots ever since.
5.0 out of 5 stars Works with PIPA Quick Mil
Used this for my PIPA espresso machine and it fixed the water leak. Can't believe it was that inexpensive to fix!
5.0 out of 5 stars Perfect
Perfect
5.0 out of 5 stars Better than the yellow one I ordered elsewhere.... perfect fit, works well.
Installed this on my Rocket Giotto. I'd ordered a yellow gasket that was supposed to fit the Rocket from the place I bought the machine, but that gasket was next to impossible to install and felt too big. This was perfect (8mm) and installed easily. Works well inside the machine and no more leaking (My old gasket was quite old and brittle).One thing to mention: one side of the gasket will have a slightly rounded profile and the other side will be a square 90 degree profile. Make sure you install the gasket correctly - rounded profile fits into the rounded shower screen corner.
5.0 out of 5 stars Great!
Awesome
4.0 out of 5 stars Perfect gasket--but that's all
Well, for the price, this is a fine gasket. It's cut cleanly and just the right size. Stuck it in my Bezzera BZ group machine no problem. It is thicker than the OEM gasket that Bezzera sells, so my portafilter doesn't need as much turn to lock in place. That's ok with me, though. The silicone is more dense and more durable than the rubber OEM gaskets use, and, when I hit that resistance locking the portafilter, I know both that I won't get leaks and that I'm not damaging the gasket. Yay for that.The docked star is docked because other silicone gaskets generally come with a screw type tool that can be used to help remove an old gasket. The group head gasket on an espresso machine can be hard to wiggle out because it's wedged into the group head. A hook with a threaded screw would have been a lovely inclusion. I spent a good hour trying to find something around the house to use before eventually landing on a Swiss Army Knife corkscrew. If you buy this, think ahead on what tools you will need to remove the old gasket because this gasket does not come with any such tool.
5.0 out of 5 stars Perfect for Profitec Go Leakage
As instructed by YouTube - this gasket fits well as a replacement for the OEM Profitec GO gasket to prevent leakage issues with 3rd party portafilters or the OEM portafilters.With the OEM items, I would sometimes experience leakage if it wasn't locked in extremely tight, but with the replacement, 6'o clock rotation is enough and I have not experienced any leaking.
5.0 out of 5 stars Worked exactly as expected
Replaced the factory seal on my profitec pro 300. Perfect fit for drop in replacement and my portafilter is back at 6 o’clock versus 5’oclock on my 4 year old factory seal. No more leaks !
Visit the Cafelat Store
Group Gasket-E61 (Red), Silicone, E61 8mm, SYNCHKG060251
AED5640
Quantity:
Order today to get by 7-14 business days
Delivery fee of AED 20. Free for orders above AED 200.
Imported From: United States
At BOLO, we work hard to ensure the products you receive are new, genuine, and sourced from reputable suppliers.
BOLO is not an authorized or official retailer for most brands, nor are we affiliated with manufacturers unless specifically stated on a product page. Instead, we source verified sellers, authorized distributors or directly from the manufacturer.
Each product undergoes thorough inspection and verification at our consolidation and fulfilment centers to ensure it meets our strict authenticity and quality standards before being shipped and delivered to you.
If you ever have concerns regarding the authenticity of a product purchased from us, please contact Bolo Support. We will review your inquiry promptly and, if necessary, provide documentation verifying authenticity or offer a suitable resolution.
Your trust is our top priority, and we are committed to maintaining transparency and integrity in every transaction.
All product information, images, descriptions, and reviews originate from the manufacturer or from trusted sellers overseas. BOLO is not affiliated with, endorsed by, or an authorized retailer for most brands listed on our website unless stated otherwise.
While we strive to display accurate information, variations in packaging, labeling, instructions, or formulation may occasionally occur due to regional differences or supplier updates. For detailed or manufacturer-specific information, please contact the brand directly or reach out to BOLO Support for assistance.
Unless otherwise stated, all prices displayed on the product page include applicable taxes and import duties.
BOLO operates in accordance with the laws and regulations of United Arab Emirates. Any items found to be restricted or prohibited for sale within the UAE will be cancelled prior to shipment. We take proactive measures to ensure that only products permitted for sale in United Arab Emirates are listed on our website.
All items are shipped by air, and any products classified as “Dangerous Goods (DG)” under IATA regulations will be removed from the order and cancelled.
All orders are processed manually, and we make every effort to process them promptly once confirmed. Products cancelled due to the above reasons will be permanently removed from listings across the website.
Similar suggestions by Bolo
More from this brand
Similar items from “Espresso Machine Replacement Parts”
Share with
Or share with link
https://www.bolo.ae/products/UO00BK59F5D
Visit the Cafelat Store
Group Gasket-E61 (Red), Silicone, E61 8mm, SYNCHKG060251
AED5640
Quantity:
Order today to get by 7-14 business days
Delivery fee of AED 20. Free for orders above AED 200.
Imported From: United States
At BOLO, we work hard to ensure the products you receive are new, genuine, and sourced from reputable suppliers.
BOLO is not an authorized or official retailer for most brands, nor are we affiliated with manufacturers unless specifically stated on a product page. Instead, we source verified sellers, authorized distributors or directly from the manufacturer.
Each product undergoes thorough inspection and verification at our consolidation and fulfilment centers to ensure it meets our strict authenticity and quality standards before being shipped and delivered to you.
If you ever have concerns regarding the authenticity of a product purchased from us, please contact Bolo Support. We will review your inquiry promptly and, if necessary, provide documentation verifying authenticity or offer a suitable resolution.
Your trust is our top priority, and we are committed to maintaining transparency and integrity in every transaction.
All product information, images, descriptions, and reviews originate from the manufacturer or from trusted sellers overseas. BOLO is not affiliated with, endorsed by, or an authorized retailer for most brands listed on our website unless stated otherwise.
While we strive to display accurate information, variations in packaging, labeling, instructions, or formulation may occasionally occur due to regional differences or supplier updates. For detailed or manufacturer-specific information, please contact the brand directly or reach out to BOLO Support for assistance.
Unless otherwise stated, all prices displayed on the product page include applicable taxes and import duties.
BOLO operates in accordance with the laws and regulations of United Arab Emirates. Any items found to be restricted or prohibited for sale within the UAE will be cancelled prior to shipment. We take proactive measures to ensure that only products permitted for sale in United Arab Emirates are listed on our website.
All items are shipped by air, and any products classified as “Dangerous Goods (DG)” under IATA regulations will be removed from the order and cancelled.
All orders are processed manually, and we make every effort to process them promptly once confirmed. Products cancelled due to the above reasons will be permanently removed from listings across the website.
Description:
Premium Cafelat group gaskets are made from food grade FDA silicone. Unlike regular gaskets that are made from rubber, these do not have any smell or taste whatsoever, and are easy to change since they will not bake rock hard like rubber does. If you have ever struggled to change an old gasket you cannot help but notice the awful smell and the black soot that comes off the rubber. And that is what you are potentially consuming with each drink. Cafelat has spent months testing and adjusting the material so that these have the same compression strength as rubber, but are also softer so that it is easier to create a good seal. The replica E61 groups made these days are pretty much all the same, the different machine manufacturers then use either an 8mm or an 8.5mm group gasket. This is the red, thinner 8mm gasket. The thickness of the gasket will determine the “lock-in” position of the portafilter handle. Ideally you want the handle to lock in directly towards you (6 o’clock position). If the gasket is too thin it will lock in too far. If the gasket is too thick it will not lock in enough. Please note that although the gaskets are strong under compression, you should never use a sharp tool like a screwdriver to install them. This may tear the silicone.
Reviews:
5.0 out of 5 stars Must have
(function() { P.when('cr-A', 'ready').execute(function(A) { if(typeof A.toggleExpanderAriaLabel === 'function') { A.toggleExpanderAriaLabel('review_text_read_more', 'Read more of this review', 'Read less of this review'); } }); })(); .review-text-read-more-expander:focus-visible { outline: 2px solid #2162a1; outline-offset: 2px; border-radius: 5px; } This is a must have if you have the lelit Mara x v2. I kept wondering why I couldn’t get adequate pressure out of my machine. Swapped out the cheap (cracked) stock gasket with this and have been getting insane shots ever since.
5.0 out of 5 stars Works with PIPA Quick Mil
Used this for my PIPA espresso machine and it fixed the water leak. Can't believe it was that inexpensive to fix!
5.0 out of 5 stars Perfect
Perfect
5.0 out of 5 stars Better than the yellow one I ordered elsewhere.... perfect fit, works well.
Installed this on my Rocket Giotto. I'd ordered a yellow gasket that was supposed to fit the Rocket from the place I bought the machine, but that gasket was next to impossible to install and felt too big. This was perfect (8mm) and installed easily. Works well inside the machine and no more leaking (My old gasket was quite old and brittle).One thing to mention: one side of the gasket will have a slightly rounded profile and the other side will be a square 90 degree profile. Make sure you install the gasket correctly - rounded profile fits into the rounded shower screen corner.
5.0 out of 5 stars Great!
Awesome
4.0 out of 5 stars Perfect gasket--but that's all
Well, for the price, this is a fine gasket. It's cut cleanly and just the right size. Stuck it in my Bezzera BZ group machine no problem. It is thicker than the OEM gasket that Bezzera sells, so my portafilter doesn't need as much turn to lock in place. That's ok with me, though. The silicone is more dense and more durable than the rubber OEM gaskets use, and, when I hit that resistance locking the portafilter, I know both that I won't get leaks and that I'm not damaging the gasket. Yay for that.The docked star is docked because other silicone gaskets generally come with a screw type tool that can be used to help remove an old gasket. The group head gasket on an espresso machine can be hard to wiggle out because it's wedged into the group head. A hook with a threaded screw would have been a lovely inclusion. I spent a good hour trying to find something around the house to use before eventually landing on a Swiss Army Knife corkscrew. If you buy this, think ahead on what tools you will need to remove the old gasket because this gasket does not come with any such tool.
5.0 out of 5 stars Perfect for Profitec Go Leakage
As instructed by YouTube - this gasket fits well as a replacement for the OEM Profitec GO gasket to prevent leakage issues with 3rd party portafilters or the OEM portafilters.With the OEM items, I would sometimes experience leakage if it wasn't locked in extremely tight, but with the replacement, 6'o clock rotation is enough and I have not experienced any leaking.
5.0 out of 5 stars Worked exactly as expected
Replaced the factory seal on my profitec pro 300. Perfect fit for drop in replacement and my portafilter is back at 6 o’clock versus 5’oclock on my 4 year old factory seal. No more leaks !
Similar suggestions by Bolo
More from this brand
Similar items from “Espresso Machine Replacement Parts”
Share with
Or share with link
https://www.bolo.ae/products/UO00BK59F5D