Description:
G0709 14" x 40" Gunsmithing Gearhead Lathe An accurate and powerful lathe. What makes the G0709 14" x 40" Gunsmithing Gearhead Lathe a "gunsmithing" lathe is that it comes with features typically not found on standard lathes, such as the high-precision NSK bearings, extra-large 1-9/16" spindle bore and a "spider" mount system. The spider mount system has four brass-tipped screws that stabilize long shafting and rifle barrels through the outboard end of the spindle. Supplied with a 2 HP motor, the 8-speed gearhead of the G0709 produces spindle speeds from 70-2000 RPM. The tailstock lock system features a drive hub, which allows you to use a 1/2” torque wrench to clamp the tailstock in place at a pre-determined torque setting. This ensures consistent draw-down alignment every time, even with multiple lathe operators using the machine. The G0709 features a foot brake that also acts as a safety device and can bring the machine to an instant stop. The G0709 also comes with a D1-5 spindle, a 200 series quick change tool post, flood coolant system, LED work light, and a pull-out chip tray. Like all Grizzly gunsmithing lathes, the G0709 comes with a 1-year warranty covering parts and assuring the unit is free from factory defects. (Consumables are not covered by the warranty.) The G0709 manual was written by our U.S. based Documentation Department and is packed with useful information. The complete and easy to read manual makes it easier to assemble and maintain your lathe. The Grizzly Technical Support team is U.S. based. Parts and accessories for the lathe may be available online and shipped from the Grizzly parts warehouse in Springfield, MO. SPECIFICATIONS Motor: 2 HP, 220V, single-phase, 10A Swing over bed: 14" Distance between centers: 40" Swing over saddle: 13-13/16" Swing over cross slide: 8-13/16" Spindle bore: 1.57" (40mm) Spindle nose taper: MT#5 Spindle nose: D1-5 Camlock Spindle speeds: 8, 70-2000 RPM Carriage travel: 36" Cross slide travel: 6-11/16" Tailstock barrel taper: MT#3 Tailstock barrel travel: 3-15/16" Overall dimensions: 71-1/2" L x 26-3/16" W x 52" H Approximate shipping weight: 1550 lbs. FEATURES Easy-to-use lever controls Hardened and ground cast-iron bed Cuts 4-112 Standard TPI and 0.1-7 Metric Cuts LH threads On/off reverse switch on carriage Socket for tailstock lock Cast aluminum gear cover STANDARD EQUIPMENT 6" 3-Jaw chuck with reversible jaws 8" 4-Jaw chuck with independent jaws 11" face plate Steady rest/follow rest Full length splash guard Quick change tool post with 2 tool holders (2) MT#3 dead centers (1 carbide tipped) (1) MT#3 live center (1) MT#5 - MT#3 sleeve Pull out chip pan 1/2" drill chuck w/ MT#3 arbor Toolbox
From the Manufacturer
G0709 14 inch X 40 inch Gunsmithing Lathe
Another great addition to our line of spectacular Grizzly lathes is this 14 inch x 40 inch workhorse. Supplied with an 8-speed gearhead, it also comes with a 2 HP motor, D1-5 spindle with a generous 1-9/16 inch bore, a 200 series quick change tool post with 2 holders, flood coolant system, halogen work light, pull-out chip tray and inch break — great for safety! Plus, the tailstock has a socket for a torque wrench mounted on the front side and the outboard end of the spindle has a spider mount system — great for stabilizing long shafting and rifle barrels. Check out the standard equipment list below.
Front View
Spider Bolts
Construction
Hardened and ground cast iron bed and cast aluminum gear cover. Removable gap bed allows turnings up to 19-3/4 inch in diameter.
Headstock
Fully enclosed headstock features precision hardened and ground gears, D1-5 spindle with 1-9/16 inch bore, centralized controls and universal gearbox, no change gears required.
Tailstock
Tailstock with V-slide and 1/2 inch square drive socket for precise alignment of centers with a torque wrench (handle included).
Spider Bolts
4 brass-tipped spider bolts for supporting barrels.
Headstock
Standard Equipment
6 inch 3-Jaw Chuck with reversible jaws; 8 inch 4-Jaw Chuck with reversible jaws; 11 inch faceplate; Steady rest/follow rest; Full length splash guard; Quick change tool post with 2 tool holders; 2 MT #3 dead centers (1 carbide-tipped); 1 MT #3 live center; 1 MT#5-MT #3 sleeve*Pull out chip pan; 1/2 inch drill chuck with MT #3 arbor; Tool box.
Swing over bed: 14"
Swing over gap: 19-3/4"
Swing over cross slide: 8-13/16"
Distance between centers: 40"
Bed width: 7-3/8"
Spindle bore: 1-9/16"
Spindle nose taper: MT#5
Spindle nose: D1-5 Camlock
Cross slide travel: 6-11/16"
Compound travel: 3-9/16"
Tailstock barrel taper: MT#3
Tailstock barrel travel: 3-15/16"
Motor: 2 HP, 220V, single-phase, 10 Amps, 60 Hz, 1725 RPM
Number of speeds: 8
Range of speeds: 70-2000 RPM
Overall dimensions: 71-1/2" L x 26-3/16" W x 52" H
Approximate shipping weight: 1510 lbs.
Removable gap bed allows turnings up to 19-3/4" in diameter
Easy to use lever controls
Hardened and ground cast iron bed
Cuts 4-112 Standard TPI and 0.1-7 Metric
On/off reverse switch on carriage
Halogen work light
Outboard spindle has 4 brass tipped screws for supporting barrels
Socket for tailstock lock
Cast aluminum gear cover
D1-5 spindle nose (6 pin)
1-9/16" spindle bore
Inch brake
No Customer Reviews
Visit the Grizzly Industrial Store
Grizzly Industrial G0709-14" x 40" Gunsmith Gearhead Metal Lathe
AED48,65072
Quantity:
Order today to get by 7-14 business days
This item qualifies for free delivery
Imported From: United States
At BOLO, we work hard to ensure the products you receive are new, genuine, and sourced from reputable suppliers.
BOLO is not an authorized or official retailer for most brands, nor are we affiliated with manufacturers unless specifically stated on a product page. Instead, we source verified sellers, authorized distributors or directly from the manufacturer.
Each product undergoes thorough inspection and verification at our consolidation and fulfilment centers to ensure it meets our strict authenticity and quality standards before being shipped and delivered to you.
If you ever have concerns regarding the authenticity of a product purchased from us, please contact Bolo Support. We will review your inquiry promptly and, if necessary, provide documentation verifying authenticity or offer a suitable resolution.
Your trust is our top priority, and we are committed to maintaining transparency and integrity in every transaction.
All product information, images, descriptions, and reviews originate from the manufacturer or from trusted sellers overseas. BOLO is not affiliated with, endorsed by, or an authorized retailer for most brands listed on our website unless stated otherwise.
While we strive to display accurate information, variations in packaging, labeling, instructions, or formulation may occasionally occur due to regional differences or supplier updates. For detailed or manufacturer-specific information, please contact the brand directly or reach out to BOLO Support for assistance.
Unless otherwise stated, all prices displayed on the product page include applicable taxes and import duties.
BOLO operates in accordance with the laws and regulations of United Arab Emirates. Any items found to be restricted or prohibited for sale within the UAE will be cancelled prior to shipment. We take proactive measures to ensure that only products permitted for sale in United Arab Emirates are listed on our website.
All items are shipped by air, and any products classified as “Dangerous Goods (DG)” under IATA regulations will be removed from the order and cancelled.
All orders are processed manually, and we make every effort to process them promptly once confirmed. Products cancelled due to the above reasons will be permanently removed from listings across the website.
Similar suggestions by Bolo
More from this brand
Similar items from “Metal Lathes”
Share with
Or share with link
https://www.bolo.ae/products/UO006FWVOJ6
Visit the Grizzly Industrial Store
Grizzly Industrial G0709-14" x 40" Gunsmith Gearhead Metal Lathe
AED48,65072
Quantity:
Order today to get by 7-14 business days
This item qualifies for free delivery
Imported From: United States
At BOLO, we work hard to ensure the products you receive are new, genuine, and sourced from reputable suppliers.
BOLO is not an authorized or official retailer for most brands, nor are we affiliated with manufacturers unless specifically stated on a product page. Instead, we source verified sellers, authorized distributors or directly from the manufacturer.
Each product undergoes thorough inspection and verification at our consolidation and fulfilment centers to ensure it meets our strict authenticity and quality standards before being shipped and delivered to you.
If you ever have concerns regarding the authenticity of a product purchased from us, please contact Bolo Support. We will review your inquiry promptly and, if necessary, provide documentation verifying authenticity or offer a suitable resolution.
Your trust is our top priority, and we are committed to maintaining transparency and integrity in every transaction.
All product information, images, descriptions, and reviews originate from the manufacturer or from trusted sellers overseas. BOLO is not affiliated with, endorsed by, or an authorized retailer for most brands listed on our website unless stated otherwise.
While we strive to display accurate information, variations in packaging, labeling, instructions, or formulation may occasionally occur due to regional differences or supplier updates. For detailed or manufacturer-specific information, please contact the brand directly or reach out to BOLO Support for assistance.
Unless otherwise stated, all prices displayed on the product page include applicable taxes and import duties.
BOLO operates in accordance with the laws and regulations of United Arab Emirates. Any items found to be restricted or prohibited for sale within the UAE will be cancelled prior to shipment. We take proactive measures to ensure that only products permitted for sale in United Arab Emirates are listed on our website.
All items are shipped by air, and any products classified as “Dangerous Goods (DG)” under IATA regulations will be removed from the order and cancelled.
All orders are processed manually, and we make every effort to process them promptly once confirmed. Products cancelled due to the above reasons will be permanently removed from listings across the website.
Description:
G0709 14" x 40" Gunsmithing Gearhead Lathe An accurate and powerful lathe. What makes the G0709 14" x 40" Gunsmithing Gearhead Lathe a "gunsmithing" lathe is that it comes with features typically not found on standard lathes, such as the high-precision NSK bearings, extra-large 1-9/16" spindle bore and a "spider" mount system. The spider mount system has four brass-tipped screws that stabilize long shafting and rifle barrels through the outboard end of the spindle. Supplied with a 2 HP motor, the 8-speed gearhead of the G0709 produces spindle speeds from 70-2000 RPM. The tailstock lock system features a drive hub, which allows you to use a 1/2” torque wrench to clamp the tailstock in place at a pre-determined torque setting. This ensures consistent draw-down alignment every time, even with multiple lathe operators using the machine. The G0709 features a foot brake that also acts as a safety device and can bring the machine to an instant stop. The G0709 also comes with a D1-5 spindle, a 200 series quick change tool post, flood coolant system, LED work light, and a pull-out chip tray. Like all Grizzly gunsmithing lathes, the G0709 comes with a 1-year warranty covering parts and assuring the unit is free from factory defects. (Consumables are not covered by the warranty.) The G0709 manual was written by our U.S. based Documentation Department and is packed with useful information. The complete and easy to read manual makes it easier to assemble and maintain your lathe. The Grizzly Technical Support team is U.S. based. Parts and accessories for the lathe may be available online and shipped from the Grizzly parts warehouse in Springfield, MO. SPECIFICATIONS Motor: 2 HP, 220V, single-phase, 10A Swing over bed: 14" Distance between centers: 40" Swing over saddle: 13-13/16" Swing over cross slide: 8-13/16" Spindle bore: 1.57" (40mm) Spindle nose taper: MT#5 Spindle nose: D1-5 Camlock Spindle speeds: 8, 70-2000 RPM Carriage travel: 36" Cross slide travel: 6-11/16" Tailstock barrel taper: MT#3 Tailstock barrel travel: 3-15/16" Overall dimensions: 71-1/2" L x 26-3/16" W x 52" H Approximate shipping weight: 1550 lbs. FEATURES Easy-to-use lever controls Hardened and ground cast-iron bed Cuts 4-112 Standard TPI and 0.1-7 Metric Cuts LH threads On/off reverse switch on carriage Socket for tailstock lock Cast aluminum gear cover STANDARD EQUIPMENT 6" 3-Jaw chuck with reversible jaws 8" 4-Jaw chuck with independent jaws 11" face plate Steady rest/follow rest Full length splash guard Quick change tool post with 2 tool holders (2) MT#3 dead centers (1 carbide tipped) (1) MT#3 live center (1) MT#5 - MT#3 sleeve Pull out chip pan 1/2" drill chuck w/ MT#3 arbor Toolbox
From the Manufacturer
G0709 14 inch X 40 inch Gunsmithing Lathe
Another great addition to our line of spectacular Grizzly lathes is this 14 inch x 40 inch workhorse. Supplied with an 8-speed gearhead, it also comes with a 2 HP motor, D1-5 spindle with a generous 1-9/16 inch bore, a 200 series quick change tool post with 2 holders, flood coolant system, halogen work light, pull-out chip tray and inch break — great for safety! Plus, the tailstock has a socket for a torque wrench mounted on the front side and the outboard end of the spindle has a spider mount system — great for stabilizing long shafting and rifle barrels. Check out the standard equipment list below.
Front View
Spider Bolts
Construction
Hardened and ground cast iron bed and cast aluminum gear cover. Removable gap bed allows turnings up to 19-3/4 inch in diameter.
Headstock
Fully enclosed headstock features precision hardened and ground gears, D1-5 spindle with 1-9/16 inch bore, centralized controls and universal gearbox, no change gears required.
Tailstock
Tailstock with V-slide and 1/2 inch square drive socket for precise alignment of centers with a torque wrench (handle included).
Spider Bolts
4 brass-tipped spider bolts for supporting barrels.
Headstock
Standard Equipment
6 inch 3-Jaw Chuck with reversible jaws; 8 inch 4-Jaw Chuck with reversible jaws; 11 inch faceplate; Steady rest/follow rest; Full length splash guard; Quick change tool post with 2 tool holders; 2 MT #3 dead centers (1 carbide-tipped); 1 MT #3 live center; 1 MT#5-MT #3 sleeve*Pull out chip pan; 1/2 inch drill chuck with MT #3 arbor; Tool box.
Swing over bed: 14"
Swing over gap: 19-3/4"
Swing over cross slide: 8-13/16"
Distance between centers: 40"
Bed width: 7-3/8"
Spindle bore: 1-9/16"
Spindle nose taper: MT#5
Spindle nose: D1-5 Camlock
Cross slide travel: 6-11/16"
Compound travel: 3-9/16"
Tailstock barrel taper: MT#3
Tailstock barrel travel: 3-15/16"
Motor: 2 HP, 220V, single-phase, 10 Amps, 60 Hz, 1725 RPM
Number of speeds: 8
Range of speeds: 70-2000 RPM
Overall dimensions: 71-1/2" L x 26-3/16" W x 52" H
Approximate shipping weight: 1510 lbs.
Removable gap bed allows turnings up to 19-3/4" in diameter
Easy to use lever controls
Hardened and ground cast iron bed
Cuts 4-112 Standard TPI and 0.1-7 Metric
On/off reverse switch on carriage
Halogen work light
Outboard spindle has 4 brass tipped screws for supporting barrels
Socket for tailstock lock
Cast aluminum gear cover
D1-5 spindle nose (6 pin)
1-9/16" spindle bore
Inch brake
No Customer Reviews
Similar suggestions by Bolo
More from this brand
Similar items from “Metal Lathes”
Share with
Or share with link
https://www.bolo.ae/products/UO006FWVOJ6