
Description:
Choosing the Size - PetSafe 1-Piece Sliding Glass Door Measure your door frame height. The 81' panel adjusts from 75 7/8' to 81'; the 96' panel adjusts from 91 7/16' to 96'. Measure your pet (use your largest pet if you have more than one): Width of the chest, with your pet standing comfortably. Height from the ground to the tallest point of the back above the shoulder. Compare both measurements to the size chart; both must meet the size requirements. If they fit two sizes, choose the larger. Also consider the Rise: the height your pet must step over, from the ground to the bottom of the door opening. Small and X-Large are only available in the 81' panel height. Installation Note: If you have a security system, contact your provider first; sensors may need to be moved. Assemble the panel (96' only): Remove the four factory-installed screws from the sides of the connection bars on the bottom section. Slide the top panel onto the bars and secure with two short flat screws per side using a manual flathead screwdriver. Do not overtighten; it can warp the frame. Insert the panel: Remove the cardboard inserts under the height adjuster. With the sliding door open, insert the panel into the interior-side upper track. Make sure the side with the visible flap screw heads faces the interior. Press up to compress the spring-loaded height adjuster, then lift the bottom into the lower track. Secure the height adjuster: Make sure it is fully extended, not tilted, and both ends of the panel are seated in the track. Drill through both pre-drilled holes with a 7/64' bit. Secure with two #6 x 1/2' screws and a Phillips screwdriver. Slide the panel flush against the door jamb with no gaps. Mark the panel position: With the panel flush against the sliding door frame (no gaps), close the door on it. On the doorframe, mark the top center of the panel and, at the bottom, the side the sliding door closes against. Open the door fully and slide the panel flush against it. Install the T-brackets (screws are permanent; adhesive is temporary and tool-free). With screws: Open the door and slide the panel clear of the marks. Place a T-bracket at the top of the track with its vertical part aligned to your mark; mark the holes. At the bottom, align the mark with the bracket edge closest to the sliding door. Drill 7/64' (2.5 mm) pilot holes in the track, then secure the brackets with four M4 x 10 mm sheet metal screws. Do not drill inside the panel rib lines where the glass is; drill only into the outer edge. Slide the panel so the bracket holes line up with that edge. Drill 7/64' pilot holes through the brackets into the panel top and bottom, and attach with two M4 x 10 mm screws. With adhesive: Clean the back of both brackets with rubbing alcohol and let dry; apply the adhesive strip to the top and inside of each bracket. Clean the upper and lower tracks near the marks and let dry completely. Line up the middle of each bracket with its mark (lower, then upper) and hold 30-60 seconds. Slide the panel fully into the jamb, align it with the brackets, and press the brackets against it for 30-60 seconds. Install the lock (on the top or bottom of the sliding or stationary door, or on the lower track): With the bolt retracted, close the door flush against the panel. Position the lock with the bolt tip facing the door frame, about 1/8' away. Mark the screw holes and bolt tip, avoiding contact with glass. Drill two pilot holes: 9/64' (3.5 mm) for aluminum doors, 7/64' (2.5 mm) for wood or vinyl. Drill a 1/4' hole for the bolt. Secure the lock with two #8 x 12' sheet metal screws using a manual screwdriver; do not overtighten. Release the bolt into the hole. Weatherproof: Close the door and clean its exposed edge with rubbing alcohol; let dry. Extra glass sweep may be needed for some installations. Place the sweep along the back edge of the sliding door, adhesive on the outer edge, brush lightly against the fixed door. Peel the backing and press on from the top down. Trim excess with scissors. An optional security bar can be added.
The PetSafe Sliding Glass Pet Door, 1-Piece is a no-cut dog and cat door insert that slides into the existing track of a sliding glass door. This Large size in bronze is made for medium-to-large dogs up to 100 lb, with a flap opening of 10 1/4 in W x 16 3/8 in H. It adjusts in height from 75 7/8 to 80 11/16 in and arrives as one assembled glass panel, so there are no two sections to connect. How to choose: measure your sliding door's height at the track, then compare your pet's shoulder height and chest width to the flap opening, not weight alone. Because the 13 1/2 in wide panel sits in the track beside your human door, it takes 13 1/2 in out of the walk-through opening for people. Taller sliding doors (91 7/16 to 96 in) need the 96 in version, available in Medium, Large and Large-Tall. Sizes in the 1-Piece line (pet weight, flap opening, step-over, panel width): Small (15 lb, 5 1/4 x 8 3/16 in, 1 3/4 in, 8 1/2 in), Medium (40 lb, 8 1/4 x 13 3/16 in, 1 3/4 in, 11 1/2 in), Large (100 lb, 10 1/4 x 16 3/8 in, 4 1/4 in, 13 1/2 in), Large-Tall (130 lb, same flap as Large, 8 1/4 in, 13 1/2 in) and XL (220 lb, 13 11/16 x 23 3/4 in, 4 1/4 in, 16 1/2 in). What you get: weather-resistant aluminum frame, shatter-resistant tempered glass, a tinted flexible flap with magnetic closure, a slide-in closing panel to keep your pet in or other animals out, and a latch kit to lock your sliding door. The box includes the closing panel, T-brackets, glass sweep, screws, latch assembly and manual. 1-Piece vs. 2-Piece: the 1-Piece glass panel is a single piece with no assembly, while the 2-Piece has two connecting panels that come apart for easier storage. For homes with very hot or cold weather, see the Extreme Weather model with dual-paned glass and three insulated flaps. Install it temporarily or permanently, and take it with you when you move. PetSafe has served pet parents since 1998, with U.S.-based customer care by phone, email or chat.
Details:
| Size | Large - Standard |
|---|---|
| Brand | PetSafe |
| Color | Bronze |
| Material | Aluminum, Glass |
| Mattress Thickness | 1 inches |
Visit the PetSafe Store
PetSafe Dog Door for Sliding Glass Door, 1-Piece, Large to 100 lb, Bronze
AED1,69445



Quantity:
Order today to get by 7-14 business days
This item qualifies for free delivery
Imported From: United States
At BOLO, we work hard to ensure the products you receive are new, genuine, and sourced from reputable suppliers.
Every product in the BOLO catalogue is sourced through our Verified Global Supply Network of verified sellers, authorized distributors or directly from the manufacturer.
Each product undergoes thorough inspection and verification at our consolidation and fulfilment centers to ensure it meets our strict authenticity and quality standards before being shipped and delivered to you.
If you ever have concerns regarding the authenticity of a product purchased from us, please contact Bolo Support. We will review your inquiry promptly and, if necessary, provide documentation verifying authenticity or offer a suitable resolution.
Your trust is our top priority, and we are committed to maintaining transparency and integrity in every transaction.
While we strive to display accurate information, variations in packaging, labeling, instructions, or formulation may occasionally occur due to regional differences or supplier updates. For detailed or manufacturer-specific information, please contact the brand directly or reach out to BOLO Support for assistance.
Unless otherwise stated, all prices displayed on the product page include applicable taxes and import duties.
BOLO operates in accordance with the laws and regulations of United Arab Emirates. Any items found to be restricted or prohibited for sale within the United Arab Emirates will be cancelled prior to shipment. We take proactive measures to ensure that only products permitted for sale in United Arab Emirates are listed on our website.
All items are shipped by air, and any products classified as “Dangerous Goods (DG)” under IATA regulations will be removed from the order and cancelled.
All orders are processed manually, and we make every effort to process them promptly once confirmed. Products cancelled due to the above reasons will be permanently removed from listings across the website.

-
Great for renters, easy-to-install pet door
Perfect for apartments and rental homes. You can install this pet door without cutting into your door frame. If you ever move you can easily remove the sliding glass door and take it with you.
-
Magnetic flap
Lets pets freely enter and exit, securely closing behind to keep cold drafts and hot weather out.
-
Slide-in locking closing panel
Included slide-in closing panel lock for added security and draft protection. Slide-in closing panel controls your pets access to the outdoors.
-
Rust-proof aluminum frame
Weather-resistant aluminum frame and durable tempered glass.


#1 Brand in Pet Doors - Over 27M Doors Sold
Explore the freedom and convenience of PetSafe's range of pet doors, designed to fit the diverse needs of your furry friends. From standard pet door options to the advanced security of electronic pet doors, we offer solutions that make pet care easier.
More from this brand
Similar items from “Doors”
Share with
Or share with link
https://www.bolo.ae/products/UO005OP83UL
Visit the PetSafe Store
PetSafe Dog Door for Sliding Glass Door, 1-Piece, Large to 100 lb, Bronze




AED1,69445
Quantity:
Order today to get by 7-14 business days
This item qualifies for free delivery
Imported From: United States
At BOLO, we work hard to ensure the products you receive are new, genuine, and sourced from reputable suppliers.
Every product in the BOLO catalogue is sourced through our Verified Global Supply Network of verified sellers, authorized distributors or directly from the manufacturer.
Each product undergoes thorough inspection and verification at our consolidation and fulfilment centers to ensure it meets our strict authenticity and quality standards before being shipped and delivered to you.
If you ever have concerns regarding the authenticity of a product purchased from us, please contact Bolo Support. We will review your inquiry promptly and, if necessary, provide documentation verifying authenticity or offer a suitable resolution.
Your trust is our top priority, and we are committed to maintaining transparency and integrity in every transaction.
While we strive to display accurate information, variations in packaging, labeling, instructions, or formulation may occasionally occur due to regional differences or supplier updates. For detailed or manufacturer-specific information, please contact the brand directly or reach out to BOLO Support for assistance.
Unless otherwise stated, all prices displayed on the product page include applicable taxes and import duties.
BOLO operates in accordance with the laws and regulations of United Arab Emirates. Any items found to be restricted or prohibited for sale within the United Arab Emirates will be cancelled prior to shipment. We take proactive measures to ensure that only products permitted for sale in United Arab Emirates are listed on our website.
All items are shipped by air, and any products classified as “Dangerous Goods (DG)” under IATA regulations will be removed from the order and cancelled.
All orders are processed manually, and we make every effort to process them promptly once confirmed. Products cancelled due to the above reasons will be permanently removed from listings across the website.
Description:
Choosing the Size - PetSafe 1-Piece Sliding Glass Door Measure your door frame height. The 81' panel adjusts from 75 7/8' to 81'; the 96' panel adjusts from 91 7/16' to 96'. Measure your pet (use your largest pet if you have more than one): Width of the chest, with your pet standing comfortably. Height from the ground to the tallest point of the back above the shoulder. Compare both measurements to the size chart; both must meet the size requirements. If they fit two sizes, choose the larger. Also consider the Rise: the height your pet must step over, from the ground to the bottom of the door opening. Small and X-Large are only available in the 81' panel height. Installation Note: If you have a security system, contact your provider first; sensors may need to be moved. Assemble the panel (96' only): Remove the four factory-installed screws from the sides of the connection bars on the bottom section. Slide the top panel onto the bars and secure with two short flat screws per side using a manual flathead screwdriver. Do not overtighten; it can warp the frame. Insert the panel: Remove the cardboard inserts under the height adjuster. With the sliding door open, insert the panel into the interior-side upper track. Make sure the side with the visible flap screw heads faces the interior. Press up to compress the spring-loaded height adjuster, then lift the bottom into the lower track. Secure the height adjuster: Make sure it is fully extended, not tilted, and both ends of the panel are seated in the track. Drill through both pre-drilled holes with a 7/64' bit. Secure with two #6 x 1/2' screws and a Phillips screwdriver. Slide the panel flush against the door jamb with no gaps. Mark the panel position: With the panel flush against the sliding door frame (no gaps), close the door on it. On the doorframe, mark the top center of the panel and, at the bottom, the side the sliding door closes against. Open the door fully and slide the panel flush against it. Install the T-brackets (screws are permanent; adhesive is temporary and tool-free). With screws: Open the door and slide the panel clear of the marks. Place a T-bracket at the top of the track with its vertical part aligned to your mark; mark the holes. At the bottom, align the mark with the bracket edge closest to the sliding door. Drill 7/64' (2.5 mm) pilot holes in the track, then secure the brackets with four M4 x 10 mm sheet metal screws. Do not drill inside the panel rib lines where the glass is; drill only into the outer edge. Slide the panel so the bracket holes line up with that edge. Drill 7/64' pilot holes through the brackets into the panel top and bottom, and attach with two M4 x 10 mm screws. With adhesive: Clean the back of both brackets with rubbing alcohol and let dry; apply the adhesive strip to the top and inside of each bracket. Clean the upper and lower tracks near the marks and let dry completely. Line up the middle of each bracket with its mark (lower, then upper) and hold 30-60 seconds. Slide the panel fully into the jamb, align it with the brackets, and press the brackets against it for 30-60 seconds. Install the lock (on the top or bottom of the sliding or stationary door, or on the lower track): With the bolt retracted, close the door flush against the panel. Position the lock with the bolt tip facing the door frame, about 1/8' away. Mark the screw holes and bolt tip, avoiding contact with glass. Drill two pilot holes: 9/64' (3.5 mm) for aluminum doors, 7/64' (2.5 mm) for wood or vinyl. Drill a 1/4' hole for the bolt. Secure the lock with two #8 x 12' sheet metal screws using a manual screwdriver; do not overtighten. Release the bolt into the hole. Weatherproof: Close the door and clean its exposed edge with rubbing alcohol; let dry. Extra glass sweep may be needed for some installations. Place the sweep along the back edge of the sliding door, adhesive on the outer edge, brush lightly against the fixed door. Peel the backing and press on from the top down. Trim excess with scissors. An optional security bar can be added.
The PetSafe Sliding Glass Pet Door, 1-Piece is a no-cut dog and cat door insert that slides into the existing track of a sliding glass door. This Large size in bronze is made for medium-to-large dogs up to 100 lb, with a flap opening of 10 1/4 in W x 16 3/8 in H. It adjusts in height from 75 7/8 to 80 11/16 in and arrives as one assembled glass panel, so there are no two sections to connect. How to choose: measure your sliding door's height at the track, then compare your pet's shoulder height and chest width to the flap opening, not weight alone. Because the 13 1/2 in wide panel sits in the track beside your human door, it takes 13 1/2 in out of the walk-through opening for people. Taller sliding doors (91 7/16 to 96 in) need the 96 in version, available in Medium, Large and Large-Tall. Sizes in the 1-Piece line (pet weight, flap opening, step-over, panel width): Small (15 lb, 5 1/4 x 8 3/16 in, 1 3/4 in, 8 1/2 in), Medium (40 lb, 8 1/4 x 13 3/16 in, 1 3/4 in, 11 1/2 in), Large (100 lb, 10 1/4 x 16 3/8 in, 4 1/4 in, 13 1/2 in), Large-Tall (130 lb, same flap as Large, 8 1/4 in, 13 1/2 in) and XL (220 lb, 13 11/16 x 23 3/4 in, 4 1/4 in, 16 1/2 in). What you get: weather-resistant aluminum frame, shatter-resistant tempered glass, a tinted flexible flap with magnetic closure, a slide-in closing panel to keep your pet in or other animals out, and a latch kit to lock your sliding door. The box includes the closing panel, T-brackets, glass sweep, screws, latch assembly and manual. 1-Piece vs. 2-Piece: the 1-Piece glass panel is a single piece with no assembly, while the 2-Piece has two connecting panels that come apart for easier storage. For homes with very hot or cold weather, see the Extreme Weather model with dual-paned glass and three insulated flaps. Install it temporarily or permanently, and take it with you when you move. PetSafe has served pet parents since 1998, with U.S.-based customer care by phone, email or chat.
Details:
| Size | Large - Standard |
|---|---|
| Brand | PetSafe |
| Color | Bronze |
| Material | Aluminum, Glass |
| Mattress Thickness | 1 inches |

-
Great for renters, easy-to-install pet door
Perfect for apartments and rental homes. You can install this pet door without cutting into your door frame. If you ever move you can easily remove the sliding glass door and take it with you.
-
Magnetic flap
Lets pets freely enter and exit, securely closing behind to keep cold drafts and hot weather out.
-
Slide-in locking closing panel
Included slide-in closing panel lock for added security and draft protection. Slide-in closing panel controls your pets access to the outdoors.
-
Rust-proof aluminum frame
Weather-resistant aluminum frame and durable tempered glass.


#1 Brand in Pet Doors - Over 27M Doors Sold
Explore the freedom and convenience of PetSafe's range of pet doors, designed to fit the diverse needs of your furry friends. From standard pet door options to the advanced security of electronic pet doors, we offer solutions that make pet care easier.
More from this brand
Similar items from “Doors”
Share with
Or share with link
https://www.bolo.ae/products/UO005OP83UL