Description:
From the Manufacturer
Each Fly Cutter is supplied with black oxide finish, a setscrew flat and a blank high speed steel tool. 1/2-Inch shanks. 3/4-Inch, 1-1/8-Inch and 1-3/8-Inch head sizes. 3/16-Inch, 1/4-Inch and 5/16-Inch bit sizes. Stand Included.
Reviews:
5.0 out of 5 stars Good price
They look good, I didn't try them yet
4.0 out of 5 stars Came in time
Work good
5.0 out of 5 stars Great Tool -- Precise and Solid!
Solid little fly-cutters! Amazing value! Have not used on metals but was able to make a precise non-standard diameter hole (1.854") in a very hard wood (Bubinga) for a tool fixture. Obviously, first drill out a smaller hole first with a conventional bit or hole cutter. Then enlarge to whatever you like. Good tool steel blades come square; grind and sharpen to whatever angles you need. Seem to hold an edge fine in hardwood.
5.0 out of 5 stars Good value for the home shop
Based on other reviews, I did not bother to try the supplied HSS blanks (waste time to grind them?). Instead I was inspired by another reviewer's approach of using a carbide lathe tool. I had some similar inexpensive bits so I milled down the shank to fit the the largest of the three holders. I wanted to see if I could put a decent single pass face on a scrap block of 2x4 with a nice knot in it. Not much of a challenge for this holder and it did work well for such a long extension (3.5 inch circle). The surface was quite smooth on both the soft and hard parts of the scrap suggesting the holder is quite stiff. Tried it on aluminium with similar good results. Other reviewers have had problems with the set screws but mine took a very high torque without issue (are they using a 3/32 wrench instead of a 2.5 mm?). Since I will be mostly using these on desert iron wood and aluminum they should be fine. Yes, as you see in the pics, the carbide face is on the wrong side of the tool; I had to run the mill in reverse (CCW).
3.0 out of 5 stars Buy for the cutters not the bits.
The cutters appear to be average. Not blown away by them, not wondering why I bought them.. The bits however, are junk. Maybe can cut aluminum, but I can't cut steel on the slowest rpm of my mill.. They just burn up.
5.0 out of 5 stars worked well
After experimenting with grinding the bit, they worked well. Clean cut, but must take a very light cut and slow feed speed.
4.0 out of 5 stars Sharp
cutters feel sharp and decent quality for the price point.
5.0 out of 5 stars Worth the price.
Just opened the package, haven't tried them, but I know they will work great.I have a little hobby mill and these will get the job done.I am amazed they can sell these for this price and ship them half way around the world.I made fly cutters many years ago when I was an apprentice and these are exactly what I would have made.
Not sure yet
Nice finish, they look well made, but have yet to try them. Fast shipping.
3セットが2個しかはいってない
だまされました！
Calidad precio
Relación calidad precio okTrabajan bien para trabajos sencillos
Schneiden fehlen teilweise
Schneiden fehlen teilweise
missing piece
Received the items which are good quality but its was missing the 3/4 inchtried to sort a replacement or partial refund and they were beyond useless
Visit the Steelex Store
Steelex M1096 Fly Cutter Set with Tool Bits
AED14211
Quantity:
Order today to get by 7-14 business days
Delivery fee of AED 20. Free for orders above AED 200.
Imported From: United States
At BOLO, we work hard to ensure the products you receive are new, genuine, and sourced from reputable suppliers.
BOLO is not an authorized or official retailer for most brands, nor are we affiliated with manufacturers unless specifically stated on a product page. Instead, we source verified sellers, authorized distributors or directly from the manufacturer.
Each product undergoes thorough inspection and verification at our consolidation and fulfilment centers to ensure it meets our strict authenticity and quality standards before being shipped and delivered to you.
If you ever have concerns regarding the authenticity of a product purchased from us, please contact Bolo Support. We will review your inquiry promptly and, if necessary, provide documentation verifying authenticity or offer a suitable resolution.
Your trust is our top priority, and we are committed to maintaining transparency and integrity in every transaction.
All product information, images, descriptions, and reviews originate from the manufacturer or from trusted sellers overseas. BOLO is not affiliated with, endorsed by, or an authorized retailer for most brands listed on our website unless stated otherwise.
While we strive to display accurate information, variations in packaging, labeling, instructions, or formulation may occasionally occur due to regional differences or supplier updates. For detailed or manufacturer-specific information, please contact the brand directly or reach out to BOLO Support for assistance.
Unless otherwise stated, all prices displayed on the product page include applicable taxes and import duties.
BOLO operates in accordance with the laws and regulations of United Arab Emirates. Any items found to be restricted or prohibited for sale within the UAE will be cancelled prior to shipment. We take proactive measures to ensure that only products permitted for sale in United Arab Emirates are listed on our website.
All items are shipped by air, and any products classified as “Dangerous Goods (DG)” under IATA regulations will be removed from the order and cancelled.
All orders are processed manually, and we make every effort to process them promptly once confirmed. Products cancelled due to the above reasons will be permanently removed from listings across the website.
Similar suggestions by Bolo
More from this brand
Similar items from “Joinery Bits”
Share with
Or share with link
https://www.bolo.ae/products/UO005J1OKMF
Visit the Steelex Store
Steelex M1096 Fly Cutter Set with Tool Bits
AED14211
Quantity:
Order today to get by 7-14 business days
Delivery fee of AED 20. Free for orders above AED 200.
Imported From: United States
At BOLO, we work hard to ensure the products you receive are new, genuine, and sourced from reputable suppliers.
BOLO is not an authorized or official retailer for most brands, nor are we affiliated with manufacturers unless specifically stated on a product page. Instead, we source verified sellers, authorized distributors or directly from the manufacturer.
Each product undergoes thorough inspection and verification at our consolidation and fulfilment centers to ensure it meets our strict authenticity and quality standards before being shipped and delivered to you.
If you ever have concerns regarding the authenticity of a product purchased from us, please contact Bolo Support. We will review your inquiry promptly and, if necessary, provide documentation verifying authenticity or offer a suitable resolution.
Your trust is our top priority, and we are committed to maintaining transparency and integrity in every transaction.
All product information, images, descriptions, and reviews originate from the manufacturer or from trusted sellers overseas. BOLO is not affiliated with, endorsed by, or an authorized retailer for most brands listed on our website unless stated otherwise.
While we strive to display accurate information, variations in packaging, labeling, instructions, or formulation may occasionally occur due to regional differences or supplier updates. For detailed or manufacturer-specific information, please contact the brand directly or reach out to BOLO Support for assistance.
Unless otherwise stated, all prices displayed on the product page include applicable taxes and import duties.
BOLO operates in accordance with the laws and regulations of United Arab Emirates. Any items found to be restricted or prohibited for sale within the UAE will be cancelled prior to shipment. We take proactive measures to ensure that only products permitted for sale in United Arab Emirates are listed on our website.
All items are shipped by air, and any products classified as “Dangerous Goods (DG)” under IATA regulations will be removed from the order and cancelled.
All orders are processed manually, and we make every effort to process them promptly once confirmed. Products cancelled due to the above reasons will be permanently removed from listings across the website.
Description:
From the Manufacturer
Each Fly Cutter is supplied with black oxide finish, a setscrew flat and a blank high speed steel tool. 1/2-Inch shanks. 3/4-Inch, 1-1/8-Inch and 1-3/8-Inch head sizes. 3/16-Inch, 1/4-Inch and 5/16-Inch bit sizes. Stand Included.
Reviews:
5.0 out of 5 stars Good price
They look good, I didn't try them yet
4.0 out of 5 stars Came in time
Work good
5.0 out of 5 stars Great Tool -- Precise and Solid!
Solid little fly-cutters! Amazing value! Have not used on metals but was able to make a precise non-standard diameter hole (1.854") in a very hard wood (Bubinga) for a tool fixture. Obviously, first drill out a smaller hole first with a conventional bit or hole cutter. Then enlarge to whatever you like. Good tool steel blades come square; grind and sharpen to whatever angles you need. Seem to hold an edge fine in hardwood.
5.0 out of 5 stars Good value for the home shop
Based on other reviews, I did not bother to try the supplied HSS blanks (waste time to grind them?). Instead I was inspired by another reviewer's approach of using a carbide lathe tool. I had some similar inexpensive bits so I milled down the shank to fit the the largest of the three holders. I wanted to see if I could put a decent single pass face on a scrap block of 2x4 with a nice knot in it. Not much of a challenge for this holder and it did work well for such a long extension (3.5 inch circle). The surface was quite smooth on both the soft and hard parts of the scrap suggesting the holder is quite stiff. Tried it on aluminium with similar good results. Other reviewers have had problems with the set screws but mine took a very high torque without issue (are they using a 3/32 wrench instead of a 2.5 mm?). Since I will be mostly using these on desert iron wood and aluminum they should be fine. Yes, as you see in the pics, the carbide face is on the wrong side of the tool; I had to run the mill in reverse (CCW).
3.0 out of 5 stars Buy for the cutters not the bits.
The cutters appear to be average. Not blown away by them, not wondering why I bought them.. The bits however, are junk. Maybe can cut aluminum, but I can't cut steel on the slowest rpm of my mill.. They just burn up.
5.0 out of 5 stars worked well
After experimenting with grinding the bit, they worked well. Clean cut, but must take a very light cut and slow feed speed.
4.0 out of 5 stars Sharp
cutters feel sharp and decent quality for the price point.
5.0 out of 5 stars Worth the price.
Just opened the package, haven't tried them, but I know they will work great.I have a little hobby mill and these will get the job done.I am amazed they can sell these for this price and ship them half way around the world.I made fly cutters many years ago when I was an apprentice and these are exactly what I would have made.
Not sure yet
Nice finish, they look well made, but have yet to try them. Fast shipping.
3セットが2個しかはいってない
だまされました！
Calidad precio
Relación calidad precio okTrabajan bien para trabajos sencillos
Schneiden fehlen teilweise
Schneiden fehlen teilweise
missing piece
Received the items which are good quality but its was missing the 3/4 inchtried to sort a replacement or partial refund and they were beyond useless
Similar suggestions by Bolo
More from this brand
Similar items from “Joinery Bits”
Share with
Or share with link
https://www.bolo.ae/products/UO005J1OKMF