Description:
Most faucets will leak over years of use but don't replace it! The Grohe ceramic cartridge is easy to install and get your faucet working perfectly in no time.
Reviews:
5.0 out of 5 stars Grohe Parkfield Kitchen Faucet
This Cartridge replaced the original on a Grohe Parkfield Kitchen Faucet, Model #30-213. The faucet was installed in October 2017. We started noticing a leak at the base where it meets the countertop, and around the bottom of the handle. The leak would then flow to the inside of the cabinet below the sink, making a mess. I replaced the original cartridge with this one, and no more leaks. It was easy to do. After removing the Handle, You could see a water stain inside there, which proved that the Cartridge was leaking. You may want to remove just Your Handle and look inside there, to prove the Cartridge bad. After seeing a few Videos on YouTube, and the MFR Website, it appeared to be easy to replace. I also looked at the MFR's instructions that came with the replacement. They all stated that You need a 32MM socket to remove the cartridge. You do. That is a large socket for those that may not be aware. I had one already...being a retired Mechanic. A regular Mechanic type socket will work...no need for a Special Plumbing socket. You can also use a 1 1/4" socket as well. I would recommend using a 6-point socket, vs. a 12-point socket. But either should work. I will also point out that sockets these sizes, generally require a 1/2" Drive Ratchet, which many may not have in a home toolbox. If that is the case, a 3/8" to 1/2" Drive Adapter is available at just about any place that sells tools for just a few bucks. As well as the needed sockets, if You don't have one.It is very important to make certain that the New Cartridge lines up correctly inside the faucet. Look at the holes inside the faucet and look at the cartridge. You will see how it should line up, and the numbers on the Cartridge should be close to the top, as You look down. It's not hard at all.If this faucet hangs around our kitchen for a while, I figure that the Cartridge will need replacing approx. every 4-5 years. Maybe sooner...We shall see.Don't Forget to Turn the Water Off
5.0 out of 5 stars Have the proper shower valve socket wrench before attempting replacement.
This cartridge fit our Grohe bathroom faucet and functions perfectly. The sleeve that comes with it didn't fit, but the cartridge itself works fine inside the original sleeve. I proactively purchased a set of different size shower valve socket wrenches to be able to properly remove & replace the retaining ring that secures the cartridge.It can be quite a task researching/locating the proper replacement cartridge for older Grohe faucets (there are SO MANY different models that can look similar); but it is worth the effort to continue using existing Grohe faucets. They are among the best. Ours were installed in 1994 and they all still work great.
4.0 out of 5 stars Solved substantial leak under the handle while water was running
Our faucet is almost 10 years old. There's a good video on the internet on how to swap out this cartridge.Tips for what you may encounter on an older faucet:Set screw: If your handle's set screw (3 mm allen head) is frozen (like ours was), shoot some WD-40 in the hole, Put a paper towel down and let it drip out. Let it sit for about 30 min. The screw is upside down, so make sure you are turning the allen key counter-clockwise. If you get the set screw to budge, keep going back and forth, then give it another shot of WD-40. Let it soak for a while, then repeat the back and forth until it wants to loosen. I removed the set screw completely.Handle: Mine would not budge. I used a piece of heavy plastic and tapped on the end and sides of the of handle. Use both hands to wiggle the handle between taps. When it finally popped off, the inside of ours was full of gunk. I put the set screw back in and filled it with CLR. Let it soak then used a toothbrush to clean it up the best I could.Money saving tip: The nut that holds the cartridge in place is 32mm. A conventional socket is too thick. The Grohe socket is $68. I went to Harbor Freight and bought a set of five "Shower Valve Sockets" for $12. They are not metric, but the 1 - 9/32" socket worked fine.The old cartridge: Our faucet had a copper cartridge sleeve, so the black plastic sleeve that it came with it did not work. It was too big. It must be for other models. I put the included O rings on this copper sleeve. Look inside the faucet's cartridge hole and make sure the three small silicone seal rings from the bottom of the old cartridge are not stuck inside. If you don't fish those out, the new cartridge will leak.Reattaching the handle: You may have to turn the new cartridge's white plastic tip 180 degrees to enable the handle to sit flush against the faucet body again. I had to. To do this, use a Philips screwdriver to remove the screw, Flip the tip 180 degrees, then screw the screw back in.That's all I got. Good luck with your cartridge swap.
5.0 out of 5 stars Easy to Install but Instructions Not the Best
Purchased this after the replacement Grohe sent (due to lifetime warranty) not only fell apart but a piece was 2 mm too large. Illustrated instructions were not very helpful. Too bad Grohe doesn’t have online tutorials.Did watch a random online video, which was very helpful. Easy fix, and thanks to another reviewer here I knew immediately how to flip the handle. After installing, the handle range was limited, so I was not getting much hot water. The black rotational limit stop pops off, and after some trial and error I got a good range of hot and cold. Again, too bad there were not clearer instructions included or available online.
1.0 out of 5 stars Not a universal fit
This item is not universal and did not work for my faucet, even though it is listed and I was directed to this item number by Grohe customer support.
PERFETTO
IDENTICO AL VECCHIO GROHE. HA FUNZIONATO DA SUBITO MA CON LA VECCHIA GHIERA CHE ERA PERFETTAMENTE COMPATIBILE ED INDISTRUTTIBILE. LO CONSIGLIO
DIYで水栓カートリッジ交換
14年使ったグローエ水栓Ｋ４のレバーの動きが硬くなってしまったので、カートリッジを交換しました。別に、元のカートリッジを外すために、以下のソケットとハンドルを購入しました。 ・トネ(TONE) ソケット(12角) 4D-32 差込角12.7mm(1/2") 二面幅32mm ・SK11 スピンナーハンドル 差込角 12.7mm 1/2インチ SFH4 グレー交換後は非常に滑らかな動きになりました。
Grohe kalitesini bilen bilir.
Orjinal ürün,sorunsuz bir şekilde montaj yaptım.güzel paketleme.
Todo perfecto
Ajuste perfecto, lo esperado de un repuesto original.
Die Kartusche passt auch in 35mm Mischbatterien der Fa. HGrohe.
Die H.Grohe- Kartusche, bestellt nach Hersteller-BN aus der Anleitung der Mischbatterie, passt genau in die Armatur und erfüllt einwandfrei die Funktion, ohne Wasserleck. (Dieser war bei der alten Kartusche infolge des langjährigen Gebrauchs eingetreten, durch die abgenutzte Gummidichtung).Obwohl in der Produktbezeichnung die Kartusche mit 40mm angegeben wird, hat sie eigentlich ein 35mm Durchmesser und passt auf 35mm Mischbatterien von Grohe ohne das schwarze mitgelieferte 40mm Anpassungsstück aus Plastik.In meinem konkreten Fall mit einem 14- jährigen L- Mischer (Modell Concetto) war nur eine 90°- Drehung der Nylonkappe an der Messingnase der Kartusche nötig (nach Lösen der Schraube), um den nach oben gerichteten Betätigungsgriff aufzustülpen und festzuziehen.
Visit the GROHE Store
Grohe 46374000 Replacement faucet ceramic cartridge, Chrome
AED40468
Quantity:
Order today to get by 7-14 business days
This item qualifies for free delivery
Imported From: United States
At BOLO, we work hard to ensure the products you receive are new, genuine, and sourced from reputable suppliers.
BOLO is not an authorized or official retailer for most brands, nor are we affiliated with manufacturers unless specifically stated on a product page. Instead, we source verified sellers, authorized distributors or directly from the manufacturer.
Each product undergoes thorough inspection and verification at our consolidation and fulfilment centers to ensure it meets our strict authenticity and quality standards before being shipped and delivered to you.
If you ever have concerns regarding the authenticity of a product purchased from us, please contact Bolo Support. We will review your inquiry promptly and, if necessary, provide documentation verifying authenticity or offer a suitable resolution.
Your trust is our top priority, and we are committed to maintaining transparency and integrity in every transaction.
All product information, images, descriptions, and reviews originate from the manufacturer or from trusted sellers overseas. BOLO is not affiliated with, endorsed by, or an authorized retailer for most brands listed on our website unless stated otherwise.
While we strive to display accurate information, variations in packaging, labeling, instructions, or formulation may occasionally occur due to regional differences or supplier updates. For detailed or manufacturer-specific information, please contact the brand directly or reach out to BOLO Support for assistance.
Unless otherwise stated, all prices displayed on the product page include applicable taxes and import duties.
BOLO operates in accordance with the laws and regulations of United Arab Emirates. Any items found to be restricted or prohibited for sale within the UAE will be cancelled prior to shipment. We take proactive measures to ensure that only products permitted for sale in United Arab Emirates are listed on our website.
All items are shipped by air, and any products classified as “Dangerous Goods (DG)” under IATA regulations will be removed from the order and cancelled.
All orders are processed manually, and we make every effort to process them promptly once confirmed. Products cancelled due to the above reasons will be permanently removed from listings across the website.
Similar suggestions by Bolo
More from this brand
Similar items from “Cartridges”
Share with
Or share with link
https://www.bolo.ae/products/UO004JDC0AX
Visit the GROHE Store
Grohe 46374000 Replacement faucet ceramic cartridge, Chrome
AED40468
Quantity:
Order today to get by 7-14 business days
This item qualifies for free delivery
Imported From: United States
At BOLO, we work hard to ensure the products you receive are new, genuine, and sourced from reputable suppliers.
BOLO is not an authorized or official retailer for most brands, nor are we affiliated with manufacturers unless specifically stated on a product page. Instead, we source verified sellers, authorized distributors or directly from the manufacturer.
Each product undergoes thorough inspection and verification at our consolidation and fulfilment centers to ensure it meets our strict authenticity and quality standards before being shipped and delivered to you.
If you ever have concerns regarding the authenticity of a product purchased from us, please contact Bolo Support. We will review your inquiry promptly and, if necessary, provide documentation verifying authenticity or offer a suitable resolution.
Your trust is our top priority, and we are committed to maintaining transparency and integrity in every transaction.
All product information, images, descriptions, and reviews originate from the manufacturer or from trusted sellers overseas. BOLO is not affiliated with, endorsed by, or an authorized retailer for most brands listed on our website unless stated otherwise.
While we strive to display accurate information, variations in packaging, labeling, instructions, or formulation may occasionally occur due to regional differences or supplier updates. For detailed or manufacturer-specific information, please contact the brand directly or reach out to BOLO Support for assistance.
Unless otherwise stated, all prices displayed on the product page include applicable taxes and import duties.
BOLO operates in accordance with the laws and regulations of United Arab Emirates. Any items found to be restricted or prohibited for sale within the UAE will be cancelled prior to shipment. We take proactive measures to ensure that only products permitted for sale in United Arab Emirates are listed on our website.
All items are shipped by air, and any products classified as “Dangerous Goods (DG)” under IATA regulations will be removed from the order and cancelled.
All orders are processed manually, and we make every effort to process them promptly once confirmed. Products cancelled due to the above reasons will be permanently removed from listings across the website.
Description:
Most faucets will leak over years of use but don't replace it! The Grohe ceramic cartridge is easy to install and get your faucet working perfectly in no time.
Reviews:
5.0 out of 5 stars Grohe Parkfield Kitchen Faucet
This Cartridge replaced the original on a Grohe Parkfield Kitchen Faucet, Model #30-213. The faucet was installed in October 2017. We started noticing a leak at the base where it meets the countertop, and around the bottom of the handle. The leak would then flow to the inside of the cabinet below the sink, making a mess. I replaced the original cartridge with this one, and no more leaks. It was easy to do. After removing the Handle, You could see a water stain inside there, which proved that the Cartridge was leaking. You may want to remove just Your Handle and look inside there, to prove the Cartridge bad. After seeing a few Videos on YouTube, and the MFR Website, it appeared to be easy to replace. I also looked at the MFR's instructions that came with the replacement. They all stated that You need a 32MM socket to remove the cartridge. You do. That is a large socket for those that may not be aware. I had one already...being a retired Mechanic. A regular Mechanic type socket will work...no need for a Special Plumbing socket. You can also use a 1 1/4" socket as well. I would recommend using a 6-point socket, vs. a 12-point socket. But either should work. I will also point out that sockets these sizes, generally require a 1/2" Drive Ratchet, which many may not have in a home toolbox. If that is the case, a 3/8" to 1/2" Drive Adapter is available at just about any place that sells tools for just a few bucks. As well as the needed sockets, if You don't have one.It is very important to make certain that the New Cartridge lines up correctly inside the faucet. Look at the holes inside the faucet and look at the cartridge. You will see how it should line up, and the numbers on the Cartridge should be close to the top, as You look down. It's not hard at all.If this faucet hangs around our kitchen for a while, I figure that the Cartridge will need replacing approx. every 4-5 years. Maybe sooner...We shall see.Don't Forget to Turn the Water Off
5.0 out of 5 stars Have the proper shower valve socket wrench before attempting replacement.
This cartridge fit our Grohe bathroom faucet and functions perfectly. The sleeve that comes with it didn't fit, but the cartridge itself works fine inside the original sleeve. I proactively purchased a set of different size shower valve socket wrenches to be able to properly remove & replace the retaining ring that secures the cartridge.It can be quite a task researching/locating the proper replacement cartridge for older Grohe faucets (there are SO MANY different models that can look similar); but it is worth the effort to continue using existing Grohe faucets. They are among the best. Ours were installed in 1994 and they all still work great.
4.0 out of 5 stars Solved substantial leak under the handle while water was running
Our faucet is almost 10 years old. There's a good video on the internet on how to swap out this cartridge.Tips for what you may encounter on an older faucet:Set screw: If your handle's set screw (3 mm allen head) is frozen (like ours was), shoot some WD-40 in the hole, Put a paper towel down and let it drip out. Let it sit for about 30 min. The screw is upside down, so make sure you are turning the allen key counter-clockwise. If you get the set screw to budge, keep going back and forth, then give it another shot of WD-40. Let it soak for a while, then repeat the back and forth until it wants to loosen. I removed the set screw completely.Handle: Mine would not budge. I used a piece of heavy plastic and tapped on the end and sides of the of handle. Use both hands to wiggle the handle between taps. When it finally popped off, the inside of ours was full of gunk. I put the set screw back in and filled it with CLR. Let it soak then used a toothbrush to clean it up the best I could.Money saving tip: The nut that holds the cartridge in place is 32mm. A conventional socket is too thick. The Grohe socket is $68. I went to Harbor Freight and bought a set of five "Shower Valve Sockets" for $12. They are not metric, but the 1 - 9/32" socket worked fine.The old cartridge: Our faucet had a copper cartridge sleeve, so the black plastic sleeve that it came with it did not work. It was too big. It must be for other models. I put the included O rings on this copper sleeve. Look inside the faucet's cartridge hole and make sure the three small silicone seal rings from the bottom of the old cartridge are not stuck inside. If you don't fish those out, the new cartridge will leak.Reattaching the handle: You may have to turn the new cartridge's white plastic tip 180 degrees to enable the handle to sit flush against the faucet body again. I had to. To do this, use a Philips screwdriver to remove the screw, Flip the tip 180 degrees, then screw the screw back in.That's all I got. Good luck with your cartridge swap.
5.0 out of 5 stars Easy to Install but Instructions Not the Best
Purchased this after the replacement Grohe sent (due to lifetime warranty) not only fell apart but a piece was 2 mm too large. Illustrated instructions were not very helpful. Too bad Grohe doesn’t have online tutorials.Did watch a random online video, which was very helpful. Easy fix, and thanks to another reviewer here I knew immediately how to flip the handle. After installing, the handle range was limited, so I was not getting much hot water. The black rotational limit stop pops off, and after some trial and error I got a good range of hot and cold. Again, too bad there were not clearer instructions included or available online.
1.0 out of 5 stars Not a universal fit
This item is not universal and did not work for my faucet, even though it is listed and I was directed to this item number by Grohe customer support.
PERFETTO
IDENTICO AL VECCHIO GROHE. HA FUNZIONATO DA SUBITO MA CON LA VECCHIA GHIERA CHE ERA PERFETTAMENTE COMPATIBILE ED INDISTRUTTIBILE. LO CONSIGLIO
DIYで水栓カートリッジ交換
14年使ったグローエ水栓Ｋ４のレバーの動きが硬くなってしまったので、カートリッジを交換しました。別に、元のカートリッジを外すために、以下のソケットとハンドルを購入しました。 ・トネ(TONE) ソケット(12角) 4D-32 差込角12.7mm(1/2") 二面幅32mm ・SK11 スピンナーハンドル 差込角 12.7mm 1/2インチ SFH4 グレー交換後は非常に滑らかな動きになりました。
Grohe kalitesini bilen bilir.
Orjinal ürün,sorunsuz bir şekilde montaj yaptım.güzel paketleme.
Todo perfecto
Ajuste perfecto, lo esperado de un repuesto original.
Die Kartusche passt auch in 35mm Mischbatterien der Fa. HGrohe.
Die H.Grohe- Kartusche, bestellt nach Hersteller-BN aus der Anleitung der Mischbatterie, passt genau in die Armatur und erfüllt einwandfrei die Funktion, ohne Wasserleck. (Dieser war bei der alten Kartusche infolge des langjährigen Gebrauchs eingetreten, durch die abgenutzte Gummidichtung).Obwohl in der Produktbezeichnung die Kartusche mit 40mm angegeben wird, hat sie eigentlich ein 35mm Durchmesser und passt auf 35mm Mischbatterien von Grohe ohne das schwarze mitgelieferte 40mm Anpassungsstück aus Plastik.In meinem konkreten Fall mit einem 14- jährigen L- Mischer (Modell Concetto) war nur eine 90°- Drehung der Nylonkappe an der Messingnase der Kartusche nötig (nach Lösen der Schraube), um den nach oben gerichteten Betätigungsgriff aufzustülpen und festzuziehen.
Similar suggestions by Bolo
More from this brand
Similar items from “Cartridges”
Share with
Or share with link
https://www.bolo.ae/products/UO004JDC0AX