Description:
Review:
5.0 out of 5 stars Worked as described
Worked very well honed out old steel wagon wheels for bushings
5.0 out of 5 stars Worked great
Worked great and still have it
5.0 out of 5 stars The best.
Flex homes are the best I’ve ever used. Last long and are available in any size. Little pricy but worth in it longevity.
5.0 out of 5 stars 5/8" is the perfect size to clean out and polish outboard tilt tubes for steering cables
After years of fighting with metal brushes and files to clean out tilt tubes for the steering cable on outboard engines I discovered this tool. Pull the steering cable out of the transom bracket. With a little bit of WD40/oil and a drill on low speed oscillate back and forth from both sides. This makes quick work of any corrosion inside the tilt tube. You don't have to go wild and make a mirror finish inside, just enough to clean it up. Go for a few seconds and pull the tool out to inspect.Once cleaned up I'd recommend putting a Seachoice 28251 on instead of the included plastic cap mercury gives you. it allows you to retain the grease and actually seal out water from ever getting into the tilt tube in the first place.Any corrosion inside there will make steering very difficult and can kill your steering cable.5/8" is the right size on all of my mercury outboards, your mileage may vary.The only complaint I have is longevity. I know these are an abrasive so they wear by design, but one lasts me one very corroded tilt tube or two moderately corroded ones. Even so, this is much cheaper and easier than replacing the tube outright.
4.0 out of 5 stars Engine builders
Used it to hone out a d16 honda block worked great just keep clean
5.0 out of 5 stars Easy buy.
Works the way it should.Approximately 22 hours from order to delivery.Why drive to the store.Place order & stay home & drink beer.
5.0 out of 5 stars Worked on my U-Joint Yoke Bores
Good product for smoothing out the yoke bores on my Corvette drive shafts. After forty years and 90,000 miles, the bores had become lightly faceted and had a few scratches on the surface.But after a few passes with this honing tool lubed with WD40, they look great and the new U-joint bearing caps will still fit tight inside the yokes, which is what you want.Because of the properties of the hone, I bought one oversized by approximately 1/4” which was perfect. And I used my battery-powered drill to run the hone until the bores looked good and clean.You just want to thoroughly clean off the slurry this process creates, so have handy paper towels and a parts or brake cleaner spray.Thank you for reading and good luck with your project.
5.0 out of 5 stars A good product
The Flex-Hone is a good product to clean out your bicycle's seat tube.
Parfait
Parfait pour un cylindre de honda big red 200es
Flex hone
Super finish
Excellent hone
Works mint for mercury 2.5L connecting rods
Works well
Nice
Works good
Works good
Visit the Flex-Hone Store
NULL
AED19958
Quantity:
Order today to get by
Free delivery on orders over AED 200
Imported From: United States
At bolo.ae, we stand behind the authenticity and quality of every product we sell. We guarantee that all items offered on our website are 100% genuine, sourced directly from authorized distributors, trusted partners, or the original brands themselves.
We do not sell counterfeit, replica, or unauthorized goods. Each product undergoes thorough inspection and verification at our consolidation and fulfilment centers to ensure it meets our strict authenticity and quality standards before being shipped and delivered to you.
If you ever have concerns regarding the authenticity of a product purchased from us, please contact Bolo Support . We will review your inquiry promptly and, if necessary, provide documentation verifying authenticity or offer a suitable resolution.
Your trust is our top priority, and we are committed to maintaining transparency and integrity in every transaction.
All product information, including images, descriptions, and reviews, is provided by third-party vendors. bolo.ae is not responsible for any claims, promotions, or representations made within product content or images. For more accurate or detailed product information, please contact the manufacturer directly or reach out to Bolo Support.
Unless otherwise stated during checkout, all prices displayed on the product page include applicable taxes and import duties.
bolo.ae operates in accordance with the laws and regulations of United Arab Emirates. Any items found to be restricted or prohibited for sale within the UAE will be cancelled prior to shipment. We take proactive measures to ensure that only products permitted for sale in United Arab Emirates are listed on our website.
All items are shipped by air, and any products classified as “Dangerous Goods (DG)” under IATA regulations will be removed from the order and cancelled.
All orders are processed manually, and we make every effort to process them promptly once confirmed. Products cancelled due to the above reasons will be permanently removed from listings across the website.
Similar suggestions by Bolo
More from this brand
Similar items from “Flex Hones”
Share with
Or share with link
https://www.bolo.ae/products/UO002KHY0D8
Visit the Flex-Hone Store
NULL
AED19958
Quantity:
Order today to get by
Free delivery on orders over AED 200
Imported From: United States
At bolo.ae, we stand behind the authenticity and quality of every product we sell. We guarantee that all items offered on our website are 100% genuine, sourced directly from authorized distributors, trusted partners, or the original brands themselves.
We do not sell counterfeit, replica, or unauthorized goods. Each product undergoes thorough inspection and verification at our consolidation and fulfilment centers to ensure it meets our strict authenticity and quality standards before being shipped and delivered to you.
If you ever have concerns regarding the authenticity of a product purchased from us, please contact Bolo Support . We will review your inquiry promptly and, if necessary, provide documentation verifying authenticity or offer a suitable resolution.
Your trust is our top priority, and we are committed to maintaining transparency and integrity in every transaction.
All product information, including images, descriptions, and reviews, is provided by third-party vendors. bolo.ae is not responsible for any claims, promotions, or representations made within product content or images. For more accurate or detailed product information, please contact the manufacturer directly or reach out to Bolo Support.
Unless otherwise stated during checkout, all prices displayed on the product page include applicable taxes and import duties.
bolo.ae operates in accordance with the laws and regulations of United Arab Emirates. Any items found to be restricted or prohibited for sale within the UAE will be cancelled prior to shipment. We take proactive measures to ensure that only products permitted for sale in United Arab Emirates are listed on our website.
All items are shipped by air, and any products classified as “Dangerous Goods (DG)” under IATA regulations will be removed from the order and cancelled.
All orders are processed manually, and we make every effort to process them promptly once confirmed. Products cancelled due to the above reasons will be permanently removed from listings across the website.
Description:
Review:
5.0 out of 5 stars Worked as described
Worked very well honed out old steel wagon wheels for bushings
5.0 out of 5 stars Worked great
Worked great and still have it
5.0 out of 5 stars The best.
Flex homes are the best I’ve ever used. Last long and are available in any size. Little pricy but worth in it longevity.
5.0 out of 5 stars 5/8" is the perfect size to clean out and polish outboard tilt tubes for steering cables
After years of fighting with metal brushes and files to clean out tilt tubes for the steering cable on outboard engines I discovered this tool. Pull the steering cable out of the transom bracket. With a little bit of WD40/oil and a drill on low speed oscillate back and forth from both sides. This makes quick work of any corrosion inside the tilt tube. You don't have to go wild and make a mirror finish inside, just enough to clean it up. Go for a few seconds and pull the tool out to inspect.Once cleaned up I'd recommend putting a Seachoice 28251 on instead of the included plastic cap mercury gives you. it allows you to retain the grease and actually seal out water from ever getting into the tilt tube in the first place.Any corrosion inside there will make steering very difficult and can kill your steering cable.5/8" is the right size on all of my mercury outboards, your mileage may vary.The only complaint I have is longevity. I know these are an abrasive so they wear by design, but one lasts me one very corroded tilt tube or two moderately corroded ones. Even so, this is much cheaper and easier than replacing the tube outright.
4.0 out of 5 stars Engine builders
Used it to hone out a d16 honda block worked great just keep clean
5.0 out of 5 stars Easy buy.
Works the way it should.Approximately 22 hours from order to delivery.Why drive to the store.Place order & stay home & drink beer.
5.0 out of 5 stars Worked on my U-Joint Yoke Bores
Good product for smoothing out the yoke bores on my Corvette drive shafts. After forty years and 90,000 miles, the bores had become lightly faceted and had a few scratches on the surface.But after a few passes with this honing tool lubed with WD40, they look great and the new U-joint bearing caps will still fit tight inside the yokes, which is what you want.Because of the properties of the hone, I bought one oversized by approximately 1/4” which was perfect. And I used my battery-powered drill to run the hone until the bores looked good and clean.You just want to thoroughly clean off the slurry this process creates, so have handy paper towels and a parts or brake cleaner spray.Thank you for reading and good luck with your project.
5.0 out of 5 stars A good product
The Flex-Hone is a good product to clean out your bicycle's seat tube.
Parfait
Parfait pour un cylindre de honda big red 200es
Flex hone
Super finish
Excellent hone
Works mint for mercury 2.5L connecting rods
Works well
Nice
Works good
Works good
Similar suggestions by Bolo
More from this brand
Similar items from “Flex Hones”
Share with
Or share with link
https://www.bolo.ae/products/UO002KHY0D8