Description:
When you need to to create strong anchorages for reinforcing substrates such as uncracked concrete, masonry, natural stone, solid rock, or steel, Sika AnchorFix-2 Super Strength Anchoring Adhesive offers a premier solution. Secure threaded bars with a quikrete high strength anchoring epoxy that cures quickly around the bar so it doesn't shift position. This is a two-component, professional-level adhesive with a high load capacity and low wastage. It's epoxy-based and free of solvents and styrene. Store cartridges in cool conditions out of direct sunlight.
Reviews:
5.0 out of 5 stars My go to!!
Only thing I use for cement anchor s. Worked great for the deck and gazebo. As well as other small projects
5.0 out of 5 stars Good stuff but have a powerful caulk gun to shoot it with
I had a cheap HF gun which couldn’t hack it, luckily my BIL had a very good one and that delivered the product just fine. It sets pretty fast even at 50º ambient but things can move for a while if not attended to.I set four 4x4 post bases that have a 9” rebar welded onto the bottom in a rock bald which was grey shale, it did not scale or shatter when I drilled it and remained very solid. I used a 1” bit to give me some wriggle room alignment wise, filled the holes 3/4’ full and pressed the bases in, a good bit flowed out the top as I set them. Over the next hour they shifted slightly and went out of alignment a tad but I coerced them back into place. They will be supporting an 8’x6’ covered porch so I probably didn’t need adhesive at all, the weight of the porch being what it is. The recommendation for a 3/4” post pin is a 7/8” hole but I didn’t have a 7/8” rotary hammer bit, only 3/4” and 1”, so 1” it was.I cut about 2” off the end of the mixing nozzle but didn’t cut back to the point where the mixing labyrinth is. I pumped out about 6” of product on a paper towel but should have done more, the gun wasn’t cooperating, by doing more it insures that only well-mixed product goes in the hole and more importantly stays in the nozzle - many people have trouble with the nozzle clogging but it’s often because they failed to follow the instructions on the tube imo. A high quality and high power caulk gun is mandatory imo.
4.0 out of 5 stars good product
The product is excellent, but I had to return it because the order arrived late and I bought it at Home Depot.
5.0 out of 5 stars plug
I used this to secure the bolts of my gate to the cement post. It really works.
5.0 out of 5 stars Works almost too well
Holds great but sets up fast. I wasn't ready for how fast it dried on the first use. It comes with two spouts so you can use it again if you don't use all the product the first time. I used it to install bolts for a gate opener and it holds them well. I'd buy it again.
3.0 out of 5 stars impossible to use fully
As others have noted, a complete pita to use. As a result you will maybe have time to use half of it before everything hardens. 3 stars instead of 1 because it appears to be very strong. Expensive too.
5.0 out of 5 stars This stuff works!
For the last month, I have been trying to glue down some paver steps in my backyard. I have tried a half a dozen products, all of which were advertised as "strong adhesives" for pavers. None of them worked. I used this product today and it was unbelievable! It did everything I needed it to do. I knew as soon as I applied it and the pavers stuck that this product was probably going to work really well. It's a been a few hours now and those paver steps aren't going anywhere!Super pleased with this product! It's not the cheapest product on the market, but, boy, does it work. Given the amount of time I've spent applying and then removing other products, I should have bought this the first time. It was well worth the price!
1.0 out of 5 stars Beware. Ours Never Came out of the Tube!
Seller must be distribruting old expoxy. We had literally the same issue as another guy. We used our best heavy duty caulking gun and it would not even exit the tube!I'm saying this is true: "I followed the instructions, removed the cap, cut the bag below the clip, inserted in a caulking gun and started to squeeze out a little to get the mixing started. Literally 10 seconds or less later tried to squeeze into the hole I had pre drilled and it was already hard in the mixing tube. I cut the nozzle back 3 inches and it was still too hard to squeeze out, broke my gun. I tried the second nozzle and another caulking gun and got one hole filled before the epoxy was hard in the nozzle again. Decided to open the whole thing up squeeze out the epoxy on a board and give it a hand mix..."Clearly defective product. Buy it from a box store instead.
Strong but super fast to cure
Seems very strong but way too fast to cureI put it in the fridge but product is very hard and comes out very slowly. When in the concrete cure in one minute or less. Won’t give you much time to install carefully the bolts
Visit the SIKA Store
SIKA AnchorFix-2 Super Strength Anchoring Adhesive - Two-Component System for Threaded Rods in Concrete, 10.1 fl. oz - Fast Curing, Solvent-Free, High Load Capacity
AED26279
Quantity:
Order today to get by 7-14 business days
This item qualifies for free delivery
Imported From: United States
At BOLO, we work hard to ensure the products you receive are new, genuine, and sourced from reputable suppliers.
BOLO is not an authorized or official retailer for most brands, nor are we affiliated with manufacturers unless specifically stated on a product page. Instead, we source verified sellers, authorized distributors or directly from the manufacturer.
Each product undergoes thorough inspection and verification at our consolidation and fulfilment centers to ensure it meets our strict authenticity and quality standards before being shipped and delivered to you.
If you ever have concerns regarding the authenticity of a product purchased from us, please contact Bolo Support. We will review your inquiry promptly and, if necessary, provide documentation verifying authenticity or offer a suitable resolution.
Your trust is our top priority, and we are committed to maintaining transparency and integrity in every transaction.
All product information, images, descriptions, and reviews originate from the manufacturer or from trusted sellers overseas. BOLO is not affiliated with, endorsed by, or an authorized retailer for most brands listed on our website unless stated otherwise.
While we strive to display accurate information, variations in packaging, labeling, instructions, or formulation may occasionally occur due to regional differences or supplier updates. For detailed or manufacturer-specific information, please contact the brand directly or reach out to BOLO Support for assistance.
Unless otherwise stated, all prices displayed on the product page include applicable taxes and import duties.
BOLO operates in accordance with the laws and regulations of United Arab Emirates. Any items found to be restricted or prohibited for sale within the UAE will be cancelled prior to shipment. We take proactive measures to ensure that only products permitted for sale in United Arab Emirates are listed on our website.
All items are shipped by air, and any products classified as “Dangerous Goods (DG)” under IATA regulations will be removed from the order and cancelled.
All orders are processed manually, and we make every effort to process them promptly once confirmed. Products cancelled due to the above reasons will be permanently removed from listings across the website.
Similar suggestions by Bolo
More from this brand
Similar items from “Silicone Adhesives”
Share with
Or share with link
https://www.bolo.ae/products/UO001NU3X4H
Visit the SIKA Store
SIKA AnchorFix-2 Super Strength Anchoring Adhesive - Two-Component System for Threaded Rods in Concrete, 10.1 fl. oz - Fast Curing, Solvent-Free, High Load Capacity
AED26279
Quantity:
Order today to get by 7-14 business days
This item qualifies for free delivery
Imported From: United States
At BOLO, we work hard to ensure the products you receive are new, genuine, and sourced from reputable suppliers.
BOLO is not an authorized or official retailer for most brands, nor are we affiliated with manufacturers unless specifically stated on a product page. Instead, we source verified sellers, authorized distributors or directly from the manufacturer.
Each product undergoes thorough inspection and verification at our consolidation and fulfilment centers to ensure it meets our strict authenticity and quality standards before being shipped and delivered to you.
If you ever have concerns regarding the authenticity of a product purchased from us, please contact Bolo Support. We will review your inquiry promptly and, if necessary, provide documentation verifying authenticity or offer a suitable resolution.
Your trust is our top priority, and we are committed to maintaining transparency and integrity in every transaction.
All product information, images, descriptions, and reviews originate from the manufacturer or from trusted sellers overseas. BOLO is not affiliated with, endorsed by, or an authorized retailer for most brands listed on our website unless stated otherwise.
While we strive to display accurate information, variations in packaging, labeling, instructions, or formulation may occasionally occur due to regional differences or supplier updates. For detailed or manufacturer-specific information, please contact the brand directly or reach out to BOLO Support for assistance.
Unless otherwise stated, all prices displayed on the product page include applicable taxes and import duties.
BOLO operates in accordance with the laws and regulations of United Arab Emirates. Any items found to be restricted or prohibited for sale within the UAE will be cancelled prior to shipment. We take proactive measures to ensure that only products permitted for sale in United Arab Emirates are listed on our website.
All items are shipped by air, and any products classified as “Dangerous Goods (DG)” under IATA regulations will be removed from the order and cancelled.
All orders are processed manually, and we make every effort to process them promptly once confirmed. Products cancelled due to the above reasons will be permanently removed from listings across the website.
Description:
When you need to to create strong anchorages for reinforcing substrates such as uncracked concrete, masonry, natural stone, solid rock, or steel, Sika AnchorFix-2 Super Strength Anchoring Adhesive offers a premier solution. Secure threaded bars with a quikrete high strength anchoring epoxy that cures quickly around the bar so it doesn't shift position. This is a two-component, professional-level adhesive with a high load capacity and low wastage. It's epoxy-based and free of solvents and styrene. Store cartridges in cool conditions out of direct sunlight.
Reviews:
5.0 out of 5 stars My go to!!
Only thing I use for cement anchor s. Worked great for the deck and gazebo. As well as other small projects
5.0 out of 5 stars Good stuff but have a powerful caulk gun to shoot it with
I had a cheap HF gun which couldn’t hack it, luckily my BIL had a very good one and that delivered the product just fine. It sets pretty fast even at 50º ambient but things can move for a while if not attended to.I set four 4x4 post bases that have a 9” rebar welded onto the bottom in a rock bald which was grey shale, it did not scale or shatter when I drilled it and remained very solid. I used a 1” bit to give me some wriggle room alignment wise, filled the holes 3/4’ full and pressed the bases in, a good bit flowed out the top as I set them. Over the next hour they shifted slightly and went out of alignment a tad but I coerced them back into place. They will be supporting an 8’x6’ covered porch so I probably didn’t need adhesive at all, the weight of the porch being what it is. The recommendation for a 3/4” post pin is a 7/8” hole but I didn’t have a 7/8” rotary hammer bit, only 3/4” and 1”, so 1” it was.I cut about 2” off the end of the mixing nozzle but didn’t cut back to the point where the mixing labyrinth is. I pumped out about 6” of product on a paper towel but should have done more, the gun wasn’t cooperating, by doing more it insures that only well-mixed product goes in the hole and more importantly stays in the nozzle - many people have trouble with the nozzle clogging but it’s often because they failed to follow the instructions on the tube imo. A high quality and high power caulk gun is mandatory imo.
4.0 out of 5 stars good product
The product is excellent, but I had to return it because the order arrived late and I bought it at Home Depot.
5.0 out of 5 stars plug
I used this to secure the bolts of my gate to the cement post. It really works.
5.0 out of 5 stars Works almost too well
Holds great but sets up fast. I wasn't ready for how fast it dried on the first use. It comes with two spouts so you can use it again if you don't use all the product the first time. I used it to install bolts for a gate opener and it holds them well. I'd buy it again.
3.0 out of 5 stars impossible to use fully
As others have noted, a complete pita to use. As a result you will maybe have time to use half of it before everything hardens. 3 stars instead of 1 because it appears to be very strong. Expensive too.
5.0 out of 5 stars This stuff works!
For the last month, I have been trying to glue down some paver steps in my backyard. I have tried a half a dozen products, all of which were advertised as "strong adhesives" for pavers. None of them worked. I used this product today and it was unbelievable! It did everything I needed it to do. I knew as soon as I applied it and the pavers stuck that this product was probably going to work really well. It's a been a few hours now and those paver steps aren't going anywhere!Super pleased with this product! It's not the cheapest product on the market, but, boy, does it work. Given the amount of time I've spent applying and then removing other products, I should have bought this the first time. It was well worth the price!
1.0 out of 5 stars Beware. Ours Never Came out of the Tube!
Seller must be distribruting old expoxy. We had literally the same issue as another guy. We used our best heavy duty caulking gun and it would not even exit the tube!I'm saying this is true: "I followed the instructions, removed the cap, cut the bag below the clip, inserted in a caulking gun and started to squeeze out a little to get the mixing started. Literally 10 seconds or less later tried to squeeze into the hole I had pre drilled and it was already hard in the mixing tube. I cut the nozzle back 3 inches and it was still too hard to squeeze out, broke my gun. I tried the second nozzle and another caulking gun and got one hole filled before the epoxy was hard in the nozzle again. Decided to open the whole thing up squeeze out the epoxy on a board and give it a hand mix..."Clearly defective product. Buy it from a box store instead.
Strong but super fast to cure
Seems very strong but way too fast to cureI put it in the fridge but product is very hard and comes out very slowly. When in the concrete cure in one minute or less. Won’t give you much time to install carefully the bolts
Similar suggestions by Bolo
More from this brand
Similar items from “Silicone Adhesives”
Share with
Or share with link
https://www.bolo.ae/products/UO001NU3X4H