Description:
The original equipment window regulator fails when the cable stresses over time. This Dorman OE FIX replacement features added cable guides and sheathing to counteract elongation and resist reel binding.
Reviews:
5.0 out of 5 stars Great replacement.
Works great, direct replacement, have had the drivers side in for 4 years, and no problem, just did passenger side.
5.0 out of 5 stars Works amazing especially if you keep going through window motors
This is a great product for the price. My dad was having problems with the driver side window motors going bad like once a year so we tried everything and after hearing about the window tracks in these trucks going bad I decided to take a gamble on just replacing the whole thing and I’m so glad I did. No matter what we did the motor was having problems after about half way with a new motor sometimes we had to pull on it while pushing the button up which shouldn’t happen. After installing the thing works so good it’s never when up that fast since he’s owned it. My advice is if you own a Tahoe,suburban,Denali or Silverado to just get this complete kit it saved so much time and money I would definitely buy again no hesitation
5.0 out of 5 stars Good replacement for a factory regulator.
Great fit, took about 30 minutes to install. As other reviews have said, a screwdriver/prybar, 7mm socket, and a 10mm socket are all you need.To remove the door panel, pop off the sideview mirror cover, take out the bezel for the door lock, and remove the bezel for the door handle. All of them are held in with clips, so use the screwdriver to pry them out. Unscrew the bolt behind the door pull/arm rest with your 7mm socket. Lift the door panel straight up and out of the hook slots. Before pulling it away too far, disconnect the little marker light at the bottom, and the switch connectors. To make things easy later on, pull the switch module out of the door panel by releasing the 4 tabs that lock it in on either side, and slide it out. Peel back the vapor barrier on the door, but leave it hanging on the door, because you have to reapply it after. I found it easy enough to remove the door handle at this point so it wasn't in my way. Just pry off the spiral clip holding the rod to it, then undo the 10mm bolt holding it on. Slide the assembly forward, and it comes right off. This may or may not be a necessary step, I don't remember. I just did it instinctively.Tape your window in the up position to the door frame. Loosen the 2 bolts that hold the window to the regulator. Plug the switches back in and roll the "window" down so it releases the clamps from the window. Now disconnect the switches again, disconnect the connector going to the window motor. At this point, it's pretty much as simple as pulling the 5 or 6 bolts that hold the regulator rails in place, and slipping them out. It may take some maneuvering, but there's plenty of room.When putting the new regulator in, make sure you've pulled all the bolts out before hand, and remove the 2 nuts at the bottom. I found it easier to put the motor side in first, then carefully collapse the cable to slip the neutral side in. Line the studs up with the holes in the door at the bottom of the rails, and put the nuts on (loosely). Now you should be able to pivot the top into place to install the new bolts. If I recall, I think I needed to use 1 of my old bolts (near the motor support) but for the other holes, I used the new ones. Tighten everything up, and plug in the motor. Now connect the door switches again, and run the motor up so that the clamps seat against the window. It's a good idea to reach in and push them up snug against the window when tightening the bolts here. Make sure that rubber pad is in place when you do it. Also, make sure the rubber pad from the previous regulator is removed. One of mine was stuck to the window when I pulled the old regulator out.Assembly is reverse of disassembly. Don't forget to reconnect the rod for the door handle. I have years of automotive experience, but this is my first window regulator replacement. Total time, 30 minutes. Tools were a 10mm socket nut driver, 7mm socket nut driver, and a standard flat head screwdriver. These rails are greased, so keep some shop rags or paper towels handy when you do all this.Performance: Rolled my window up and down for the first time in 9 years. :D Motor didn't seem like it was struggling, and it moves faster than my factory drivers side motor. Needless to say, that one is probably near the end of its lifespan too. I'd be more than happy to replace it with this product.For people tackling this for the first time, or people with less experience. It may look intimidating at first, but take your time, and you'll be fine. There's nothing that can go back in the wrong place (all connectors are keyed). I would say for the less experienced, this should take less than an hour. I wrote this from memory, so if I missed anything, I apologize.
5.0 out of 5 stars Work great for 2000 gmc Yukon xl
Work great for 2000 gmc Yukon xl. Easy install
4.0 out of 5 stars Fit and worked
Did what it is supposed to do.
5.0 out of 5 stars Great quality, easy installation
Excellent quality fits perfect easy install powerful motor!! I would recommend to anybody needing to replace their window regulator. I am not AI I don’t drive a Tesla or an electric car. I’m a real human being that drives a diesel truck.
5.0 out of 5 stars Good
Is really easy to install and is a very good fit.
5.0 out of 5 stars Great product
Great product, well built and fit perfectly and good quality. I can always trust Dorman!
غير مطابق للمواصفات
للاصلاح
Dependable seller with quality parts!!!
Unfortunately I ordered the wrong part being that It wouldn't have been compatible for my car, but everything else was spot on, with a sooner than expected delivery.
A la perfección
The media could not be loaded. Funcionó correctamente y no se batalló para hacer la instalación, todo encajó en su lugar. Se instaló en una SILVERADO 2000 5.3 país de origen Canadá
Window Works!!!
I should start off by saying that I am by no means a mechanical genius. However, once the inner trim and door panel was removed I was able to easily remove the regulator that had failed. Now comes the surprise: I was able to place the new regulator in position and secure it in about 5 minutes. I then tightened the bolts holding the window in place easily. I should note that there is a torque listed for those bolts but my torque wrench does not go that low so I estimated the pressure I applied. Window in place and wires connected a quick check to ensure everything was working properly. Now replace the panel and inner trim. Job done in about 30 minutes. Less cost and more satisfaction than paying to have it done. If the need arises I would not hesitate to purchase one of these for another of my vehicles.
Works
Seems to work well, but long term durability remains to be seen. Was a direct replacement for my 2001 GMC Sierra 1500. Came with it's own mounting hardware for the rails which is nice. Only had to use one of the old bolts for the motor. The design of this is slightly different than the OEM one, but that doesn't affect mounting. It comes with a nice slip of paper that describes the differences.Pro Tip: after installing (but before putting your door panel back on), lube up the rails with a generous amount of silicone grease. Not only will this make the power window much quieter, it will improve life of parts. The rails come pre-greased, but a lot of it comes off from handling during installation.EDIT: 5 months later, still working flawlessly. Moves the window noticeably faster and sounds quieter than the passenger side window (which is still OEM). Very happy with this part.
Visit the Dorman Store
Dorman 741-645 Front Passenger Side Power Window Regulator and Motor Assembly Compatible with Select Cadillac / Chevrolet / GMC Models (OE FIX)
AED45274
Quantity:
Order today to get by 7-14 business days
This item qualifies for free delivery
Imported From: United States
At BOLO, we work hard to ensure the products you receive are new, genuine, and sourced from reputable suppliers.
BOLO is not an authorized or official retailer for most brands, nor are we affiliated with manufacturers unless specifically stated on a product page. Instead, we source verified sellers, authorized distributors or directly from the manufacturer.
Each product undergoes thorough inspection and verification at our consolidation and fulfilment centers to ensure it meets our strict authenticity and quality standards before being shipped and delivered to you.
If you ever have concerns regarding the authenticity of a product purchased from us, please contact Bolo Support. We will review your inquiry promptly and, if necessary, provide documentation verifying authenticity or offer a suitable resolution.
Your trust is our top priority, and we are committed to maintaining transparency and integrity in every transaction.
All product information, images, descriptions, and reviews originate from the manufacturer or from trusted sellers overseas. BOLO is not affiliated with, endorsed by, or an authorized retailer for most brands listed on our website unless stated otherwise.
While we strive to display accurate information, variations in packaging, labeling, instructions, or formulation may occasionally occur due to regional differences or supplier updates. For detailed or manufacturer-specific information, please contact the brand directly or reach out to BOLO Support for assistance.
Unless otherwise stated, all prices displayed on the product page include applicable taxes and import duties.
BOLO operates in accordance with the laws and regulations of United Arab Emirates. Any items found to be restricted or prohibited for sale within the UAE will be cancelled prior to shipment. We take proactive measures to ensure that only products permitted for sale in United Arab Emirates are listed on our website.
All items are shipped by air, and any products classified as “Dangerous Goods (DG)” under IATA regulations will be removed from the order and cancelled.
All orders are processed manually, and we make every effort to process them promptly once confirmed. Products cancelled due to the above reasons will be permanently removed from listings across the website.
Similar suggestions by Bolo
More from this brand
Similar items from “Power Window Regulators”
Share with
Or share with link
https://www.bolo.ae/products/UO000P11WW8
Visit the Dorman Store
Dorman 741-645 Front Passenger Side Power Window Regulator and Motor Assembly Compatible with Select Cadillac / Chevrolet / GMC Models (OE FIX)
AED45274
Quantity:
Order today to get by 7-14 business days
This item qualifies for free delivery
Imported From: United States
At BOLO, we work hard to ensure the products you receive are new, genuine, and sourced from reputable suppliers.
BOLO is not an authorized or official retailer for most brands, nor are we affiliated with manufacturers unless specifically stated on a product page. Instead, we source verified sellers, authorized distributors or directly from the manufacturer.
Each product undergoes thorough inspection and verification at our consolidation and fulfilment centers to ensure it meets our strict authenticity and quality standards before being shipped and delivered to you.
If you ever have concerns regarding the authenticity of a product purchased from us, please contact Bolo Support. We will review your inquiry promptly and, if necessary, provide documentation verifying authenticity or offer a suitable resolution.
Your trust is our top priority, and we are committed to maintaining transparency and integrity in every transaction.
All product information, images, descriptions, and reviews originate from the manufacturer or from trusted sellers overseas. BOLO is not affiliated with, endorsed by, or an authorized retailer for most brands listed on our website unless stated otherwise.
While we strive to display accurate information, variations in packaging, labeling, instructions, or formulation may occasionally occur due to regional differences or supplier updates. For detailed or manufacturer-specific information, please contact the brand directly or reach out to BOLO Support for assistance.
Unless otherwise stated, all prices displayed on the product page include applicable taxes and import duties.
BOLO operates in accordance with the laws and regulations of United Arab Emirates. Any items found to be restricted or prohibited for sale within the UAE will be cancelled prior to shipment. We take proactive measures to ensure that only products permitted for sale in United Arab Emirates are listed on our website.
All items are shipped by air, and any products classified as “Dangerous Goods (DG)” under IATA regulations will be removed from the order and cancelled.
All orders are processed manually, and we make every effort to process them promptly once confirmed. Products cancelled due to the above reasons will be permanently removed from listings across the website.
Description:
The original equipment window regulator fails when the cable stresses over time. This Dorman OE FIX replacement features added cable guides and sheathing to counteract elongation and resist reel binding.
Reviews:
5.0 out of 5 stars Great replacement.
Works great, direct replacement, have had the drivers side in for 4 years, and no problem, just did passenger side.
5.0 out of 5 stars Works amazing especially if you keep going through window motors
This is a great product for the price. My dad was having problems with the driver side window motors going bad like once a year so we tried everything and after hearing about the window tracks in these trucks going bad I decided to take a gamble on just replacing the whole thing and I’m so glad I did. No matter what we did the motor was having problems after about half way with a new motor sometimes we had to pull on it while pushing the button up which shouldn’t happen. After installing the thing works so good it’s never when up that fast since he’s owned it. My advice is if you own a Tahoe,suburban,Denali or Silverado to just get this complete kit it saved so much time and money I would definitely buy again no hesitation
5.0 out of 5 stars Good replacement for a factory regulator.
Great fit, took about 30 minutes to install. As other reviews have said, a screwdriver/prybar, 7mm socket, and a 10mm socket are all you need.To remove the door panel, pop off the sideview mirror cover, take out the bezel for the door lock, and remove the bezel for the door handle. All of them are held in with clips, so use the screwdriver to pry them out. Unscrew the bolt behind the door pull/arm rest with your 7mm socket. Lift the door panel straight up and out of the hook slots. Before pulling it away too far, disconnect the little marker light at the bottom, and the switch connectors. To make things easy later on, pull the switch module out of the door panel by releasing the 4 tabs that lock it in on either side, and slide it out. Peel back the vapor barrier on the door, but leave it hanging on the door, because you have to reapply it after. I found it easy enough to remove the door handle at this point so it wasn't in my way. Just pry off the spiral clip holding the rod to it, then undo the 10mm bolt holding it on. Slide the assembly forward, and it comes right off. This may or may not be a necessary step, I don't remember. I just did it instinctively.Tape your window in the up position to the door frame. Loosen the 2 bolts that hold the window to the regulator. Plug the switches back in and roll the "window" down so it releases the clamps from the window. Now disconnect the switches again, disconnect the connector going to the window motor. At this point, it's pretty much as simple as pulling the 5 or 6 bolts that hold the regulator rails in place, and slipping them out. It may take some maneuvering, but there's plenty of room.When putting the new regulator in, make sure you've pulled all the bolts out before hand, and remove the 2 nuts at the bottom. I found it easier to put the motor side in first, then carefully collapse the cable to slip the neutral side in. Line the studs up with the holes in the door at the bottom of the rails, and put the nuts on (loosely). Now you should be able to pivot the top into place to install the new bolts. If I recall, I think I needed to use 1 of my old bolts (near the motor support) but for the other holes, I used the new ones. Tighten everything up, and plug in the motor. Now connect the door switches again, and run the motor up so that the clamps seat against the window. It's a good idea to reach in and push them up snug against the window when tightening the bolts here. Make sure that rubber pad is in place when you do it. Also, make sure the rubber pad from the previous regulator is removed. One of mine was stuck to the window when I pulled the old regulator out.Assembly is reverse of disassembly. Don't forget to reconnect the rod for the door handle. I have years of automotive experience, but this is my first window regulator replacement. Total time, 30 minutes. Tools were a 10mm socket nut driver, 7mm socket nut driver, and a standard flat head screwdriver. These rails are greased, so keep some shop rags or paper towels handy when you do all this.Performance: Rolled my window up and down for the first time in 9 years. :D Motor didn't seem like it was struggling, and it moves faster than my factory drivers side motor. Needless to say, that one is probably near the end of its lifespan too. I'd be more than happy to replace it with this product.For people tackling this for the first time, or people with less experience. It may look intimidating at first, but take your time, and you'll be fine. There's nothing that can go back in the wrong place (all connectors are keyed). I would say for the less experienced, this should take less than an hour. I wrote this from memory, so if I missed anything, I apologize.
5.0 out of 5 stars Work great for 2000 gmc Yukon xl
Work great for 2000 gmc Yukon xl. Easy install
4.0 out of 5 stars Fit and worked
Did what it is supposed to do.
5.0 out of 5 stars Great quality, easy installation
Excellent quality fits perfect easy install powerful motor!! I would recommend to anybody needing to replace their window regulator. I am not AI I don’t drive a Tesla or an electric car. I’m a real human being that drives a diesel truck.
5.0 out of 5 stars Good
Is really easy to install and is a very good fit.
5.0 out of 5 stars Great product
Great product, well built and fit perfectly and good quality. I can always trust Dorman!
غير مطابق للمواصفات
للاصلاح
Dependable seller with quality parts!!!
Unfortunately I ordered the wrong part being that It wouldn't have been compatible for my car, but everything else was spot on, with a sooner than expected delivery.
A la perfección
The media could not be loaded. Funcionó correctamente y no se batalló para hacer la instalación, todo encajó en su lugar. Se instaló en una SILVERADO 2000 5.3 país de origen Canadá
Window Works!!!
I should start off by saying that I am by no means a mechanical genius. However, once the inner trim and door panel was removed I was able to easily remove the regulator that had failed. Now comes the surprise: I was able to place the new regulator in position and secure it in about 5 minutes. I then tightened the bolts holding the window in place easily. I should note that there is a torque listed for those bolts but my torque wrench does not go that low so I estimated the pressure I applied. Window in place and wires connected a quick check to ensure everything was working properly. Now replace the panel and inner trim. Job done in about 30 minutes. Less cost and more satisfaction than paying to have it done. If the need arises I would not hesitate to purchase one of these for another of my vehicles.
Works
Seems to work well, but long term durability remains to be seen. Was a direct replacement for my 2001 GMC Sierra 1500. Came with it's own mounting hardware for the rails which is nice. Only had to use one of the old bolts for the motor. The design of this is slightly different than the OEM one, but that doesn't affect mounting. It comes with a nice slip of paper that describes the differences.Pro Tip: after installing (but before putting your door panel back on), lube up the rails with a generous amount of silicone grease. Not only will this make the power window much quieter, it will improve life of parts. The rails come pre-greased, but a lot of it comes off from handling during installation.EDIT: 5 months later, still working flawlessly. Moves the window noticeably faster and sounds quieter than the passenger side window (which is still OEM). Very happy with this part.
Similar suggestions by Bolo
More from this brand
Similar items from “Power Window Regulators”
Share with
Or share with link
https://www.bolo.ae/products/UO000P11WW8