Description:
Review:
5.0 out of 5 stars Item fits perfectly and works perfectly!
We received exactly what we wanted and ordered and it was a super-speedy delivery. The item is exactly like the old sprayer we had and the water pressure is so much better now and the sprayer works!
5.0 out of 5 stars Buy the O-ring and use some grease to install.
The wand was an exact substitute for my 20 year old Grohe wand. Color is better match than the original. Easy to unscrew. After removing old O-ring, put some plumbers grease in the groove and all over the O-ring. Insert into wand and tighten with a pair of pliers. No leak. Works as new. Would buy again.
5.0 out of 5 stars OEM…great product…one detail…
Had to replace the faucet head. Went with the OEM to avoid problems. Matched my 10+ year old faucet perfectly.Very easy install. Basically unscrew the old one and screw in the new one. Videos online.One detail…Remember to replace the o ring too. Very important.
4.0 out of 5 stars Good replacement
Replaced my original unit which stopped work after 20+ years. Works fine. Follow the instructions for installation.
5.0 out of 5 stars It's original replacement
Replacing the faucet head is a pretty simple screw-off/screw-on exercise. I followed the advice of other reviewers and replaced the O-ring situated in a groove at the tip of the hose. Have to be careful if using a sharp pointed tool to pry off the old one or you'll be in the ER for stitches. I cut the middle of the O-ring to destroy it and then picked it out with tweezers. The new one slid on easily. Also, don't forget to insert the new strainer into the tip of the hose and press it into place. Then you're ready to line-up the tip with the inlet for the head and screw the hose cuff into the head. Make sure its snug and check under the sink to make sure there is no leak. My installation went without a problem.
5.0 out of 5 stars Back to that O Ring
On the end of the retractable 3/8" coil steel hose/ spray head connection point (NOT on this new part you are buying) you will see a little rubber 1/4" or so O ring, after you unscrew and detach this hose from the old spray head. Looks fine right? NO! Looks can be deceiving!Even though it looks perfectly OK it needs to be removed and replaced with the O Ring Grohe makes (Part 01224000) and which is available for $7 on this Grohe spray head replacement Bolo website as an add-on.It must be purchased because whether you know it or not the old O Ring is worn out and will not seal the joint properly. Once you install the new O Ring by removing the old one with a very sharp pointed object like a knife end, and carefully slip the new O Ring over the hose end into the groove it is seated in, you will 'feel' the new O ring 'seal' the joint as you slip the sprayer head onto the end of the water hose.IMPORTANT! Failure to replace the O Ring will result in a leak at this joint that will not be immediately evident, as the water will leak down the hose and eventually pool under the sink out of sight! Believe me, I know, as I was awoken by my wife at 4am who, while starting her cleaning chores, noticed that a large pool of water had accumulated under all the stuff stored under the sink. Guess who she woke up to get it fixed!!!!Buy the O Ring and like another guy said be careful to keep the hose from slipping back into the faucet assembly as you replace the O Ring and sprayer head!Teflon plumber's tape wound around the old O Ring is no substitute for the new O Ring. I tried that on the old O ring and that did not help.By the way, the new sprayer head has a little cylindrical shaped strainer that is loose in the package. This little part slips into the sprayer head with the flat part facing towards the water supply hose and the pointed end towards the sprayer nozzle head.
1.0 out of 5 stars As sold, this sprayer does not actually fit the attachment hose.
I ordered the sprayer as a replacement for our existing one which had become worn and needed replacing. I was a bit bewildered as to why the hose connector to the sprayer kept leaking. The two joints didn’t seemed to fit flush and even after applying plumbers putty it still kept leaking. My old one fit perfectly without any added effort like putty or plumbers tape so this seemed odd. Here is where my one star rating comes in. As per Bolo, I reached out to Grohe. Not a peep! There was never even the slightest acknowledgement or reply nor was I able to reach a human when calling their support line.Before returning the sprayer, I perused the question & answer section and noticed that others had experienced the same issue. One person mentioned that according to Grohe, there had been a production issue and the inventory would be replaced early 2021. Well that answered that question! Another person mentioned that you can buy an o-ring from Grohe that stops the leaking for $6. So, I ordered the penny size $6 o-ring and my leaking problem was solved.But why on Earth, is Grohe still selling these sprayers, since they seem to be aware of the problem and why is Bolo allowing them to do that unless they are so attached to their 17% commission that hey just can’t let go of it. Grohe of course, just made an extra $6 sale on an item that probably cost them a penny to make, so perhaps that is all the explanation needed.
5.0 out of 5 stars Buy the O ring too
This is a more recent review since the faucet head no longer comes with loose parts. My Grohe faucet is the original one with the spring around the hose instead of the weight. I needed to replace both the faucet head and the hose. The plastic filter was seated in the faucet head when I took it out of the box and there were no loose parts. Thanks to the reviews here, I also purchased a new O ring. I first tested the new faucet head without replacing the O ring and found that it dripped a bit. I unscrewed the head, dropped in the new O ring, and that took care of the drip. The faucet head works perfectly and seats nicely in the old faucet. It’s not an exact duplicate and not made of the same materials as the original, but it does the trick if you don’t want to buy and install an entire new faucet. I didn’t. Yeah it’s expensive but the finish is a fairly good match. (I bought the Real Steel finish that is close enough to the faucet’s matte-like appearance.). Buy the Grohe O ring. And if you use the old spring on the hose, don’t let it get tangled, lol.
piece détachée grohé
Cette piece détachée grohé s'ajuste parfaitement au robinet de l'évier.Juste un peu dur à visser,mais avec un peu d'huile cela s'est bien installé.Si cela dure autant que la pièce d'origine ( 9 ans ) ce sera super .
Snel en correct geregeld
Vervanger van bestaande sproeikop. Perfect.
muy caro
Tuve que comprar este grifo para sustituir uno igual que se me había estropeado. Es de muy buena marca, funciona muy bien y de buena calidad, pero sinceramente para ser un repuesto es excesivamente caro.
PARFAIT
Conforme à la pièce d'origine et moins cher qu'acheté directement auprès de la marque
Ersatzteil
Passt und funktioniert
Visit the GROHE Store
GROHE 46312SD0 Pull Out Spray, RealSteel
AED53263
Quantity:
Order today to get by
Free delivery on orders over AED 200
Imported From: United States
At bolo.ae, we stand behind the authenticity and quality of every product we sell. We guarantee that all items offered on our website are 100% genuine, sourced directly from authorized distributors, trusted partners, or the original brands themselves.
We do not sell counterfeit, replica, or unauthorized goods. Each product undergoes thorough inspection and verification at our consolidation and fulfilment centers to ensure it meets our strict authenticity and quality standards before being shipped and delivered to you.
If you ever have concerns regarding the authenticity of a product purchased from us, please contact Bolo Support . We will review your inquiry promptly and, if necessary, provide documentation verifying authenticity or offer a suitable resolution.
Your trust is our top priority, and we are committed to maintaining transparency and integrity in every transaction.
All product information, including images, descriptions, and reviews, is provided by third-party vendors. bolo.ae is not responsible for any claims, promotions, or representations made within product content or images. For more accurate or detailed product information, please contact the manufacturer directly or reach out to Bolo Support.
Unless otherwise stated during checkout, all prices displayed on the product page include applicable taxes and import duties.
bolo.ae operates in accordance with the laws and regulations of United Arab Emirates. Any items found to be restricted or prohibited for sale within the UAE will be cancelled prior to shipment. We take proactive measures to ensure that only products permitted for sale in United Arab Emirates are listed on our website.
All items are shipped by air, and any products classified as “Dangerous Goods (DG)” under IATA regulations will be removed from the order and cancelled.
All orders are processed manually, and we make every effort to process them promptly once confirmed. Products cancelled due to the above reasons will be permanently removed from listings across the website.
Similar suggestions by Bolo
More from this brand
Similar items from “Shower Body Sprays”
Share with
Or share with link
https://www.bolo.ae/products/UO000DO8L38
Visit the GROHE Store
GROHE 46312SD0 Pull Out Spray, RealSteel
AED53263
Quantity:
Order today to get by
Free delivery on orders over AED 200
Imported From: United States
At bolo.ae, we stand behind the authenticity and quality of every product we sell. We guarantee that all items offered on our website are 100% genuine, sourced directly from authorized distributors, trusted partners, or the original brands themselves.
We do not sell counterfeit, replica, or unauthorized goods. Each product undergoes thorough inspection and verification at our consolidation and fulfilment centers to ensure it meets our strict authenticity and quality standards before being shipped and delivered to you.
If you ever have concerns regarding the authenticity of a product purchased from us, please contact Bolo Support . We will review your inquiry promptly and, if necessary, provide documentation verifying authenticity or offer a suitable resolution.
Your trust is our top priority, and we are committed to maintaining transparency and integrity in every transaction.
All product information, including images, descriptions, and reviews, is provided by third-party vendors. bolo.ae is not responsible for any claims, promotions, or representations made within product content or images. For more accurate or detailed product information, please contact the manufacturer directly or reach out to Bolo Support.
Unless otherwise stated during checkout, all prices displayed on the product page include applicable taxes and import duties.
bolo.ae operates in accordance with the laws and regulations of United Arab Emirates. Any items found to be restricted or prohibited for sale within the UAE will be cancelled prior to shipment. We take proactive measures to ensure that only products permitted for sale in United Arab Emirates are listed on our website.
All items are shipped by air, and any products classified as “Dangerous Goods (DG)” under IATA regulations will be removed from the order and cancelled.
All orders are processed manually, and we make every effort to process them promptly once confirmed. Products cancelled due to the above reasons will be permanently removed from listings across the website.
Description:
Review:
5.0 out of 5 stars Item fits perfectly and works perfectly!
We received exactly what we wanted and ordered and it was a super-speedy delivery. The item is exactly like the old sprayer we had and the water pressure is so much better now and the sprayer works!
5.0 out of 5 stars Buy the O-ring and use some grease to install.
The wand was an exact substitute for my 20 year old Grohe wand. Color is better match than the original. Easy to unscrew. After removing old O-ring, put some plumbers grease in the groove and all over the O-ring. Insert into wand and tighten with a pair of pliers. No leak. Works as new. Would buy again.
5.0 out of 5 stars OEM…great product…one detail…
Had to replace the faucet head. Went with the OEM to avoid problems. Matched my 10+ year old faucet perfectly.Very easy install. Basically unscrew the old one and screw in the new one. Videos online.One detail…Remember to replace the o ring too. Very important.
4.0 out of 5 stars Good replacement
Replaced my original unit which stopped work after 20+ years. Works fine. Follow the instructions for installation.
5.0 out of 5 stars It's original replacement
Replacing the faucet head is a pretty simple screw-off/screw-on exercise. I followed the advice of other reviewers and replaced the O-ring situated in a groove at the tip of the hose. Have to be careful if using a sharp pointed tool to pry off the old one or you'll be in the ER for stitches. I cut the middle of the O-ring to destroy it and then picked it out with tweezers. The new one slid on easily. Also, don't forget to insert the new strainer into the tip of the hose and press it into place. Then you're ready to line-up the tip with the inlet for the head and screw the hose cuff into the head. Make sure its snug and check under the sink to make sure there is no leak. My installation went without a problem.
5.0 out of 5 stars Back to that O Ring
On the end of the retractable 3/8" coil steel hose/ spray head connection point (NOT on this new part you are buying) you will see a little rubber 1/4" or so O ring, after you unscrew and detach this hose from the old spray head. Looks fine right? NO! Looks can be deceiving!Even though it looks perfectly OK it needs to be removed and replaced with the O Ring Grohe makes (Part 01224000) and which is available for $7 on this Grohe spray head replacement Bolo website as an add-on.It must be purchased because whether you know it or not the old O Ring is worn out and will not seal the joint properly. Once you install the new O Ring by removing the old one with a very sharp pointed object like a knife end, and carefully slip the new O Ring over the hose end into the groove it is seated in, you will 'feel' the new O ring 'seal' the joint as you slip the sprayer head onto the end of the water hose.IMPORTANT! Failure to replace the O Ring will result in a leak at this joint that will not be immediately evident, as the water will leak down the hose and eventually pool under the sink out of sight! Believe me, I know, as I was awoken by my wife at 4am who, while starting her cleaning chores, noticed that a large pool of water had accumulated under all the stuff stored under the sink. Guess who she woke up to get it fixed!!!!Buy the O Ring and like another guy said be careful to keep the hose from slipping back into the faucet assembly as you replace the O Ring and sprayer head!Teflon plumber's tape wound around the old O Ring is no substitute for the new O Ring. I tried that on the old O ring and that did not help.By the way, the new sprayer head has a little cylindrical shaped strainer that is loose in the package. This little part slips into the sprayer head with the flat part facing towards the water supply hose and the pointed end towards the sprayer nozzle head.
1.0 out of 5 stars As sold, this sprayer does not actually fit the attachment hose.
I ordered the sprayer as a replacement for our existing one which had become worn and needed replacing. I was a bit bewildered as to why the hose connector to the sprayer kept leaking. The two joints didn’t seemed to fit flush and even after applying plumbers putty it still kept leaking. My old one fit perfectly without any added effort like putty or plumbers tape so this seemed odd. Here is where my one star rating comes in. As per Bolo, I reached out to Grohe. Not a peep! There was never even the slightest acknowledgement or reply nor was I able to reach a human when calling their support line.Before returning the sprayer, I perused the question & answer section and noticed that others had experienced the same issue. One person mentioned that according to Grohe, there had been a production issue and the inventory would be replaced early 2021. Well that answered that question! Another person mentioned that you can buy an o-ring from Grohe that stops the leaking for $6. So, I ordered the penny size $6 o-ring and my leaking problem was solved.But why on Earth, is Grohe still selling these sprayers, since they seem to be aware of the problem and why is Bolo allowing them to do that unless they are so attached to their 17% commission that hey just can’t let go of it. Grohe of course, just made an extra $6 sale on an item that probably cost them a penny to make, so perhaps that is all the explanation needed.
5.0 out of 5 stars Buy the O ring too
This is a more recent review since the faucet head no longer comes with loose parts. My Grohe faucet is the original one with the spring around the hose instead of the weight. I needed to replace both the faucet head and the hose. The plastic filter was seated in the faucet head when I took it out of the box and there were no loose parts. Thanks to the reviews here, I also purchased a new O ring. I first tested the new faucet head without replacing the O ring and found that it dripped a bit. I unscrewed the head, dropped in the new O ring, and that took care of the drip. The faucet head works perfectly and seats nicely in the old faucet. It’s not an exact duplicate and not made of the same materials as the original, but it does the trick if you don’t want to buy and install an entire new faucet. I didn’t. Yeah it’s expensive but the finish is a fairly good match. (I bought the Real Steel finish that is close enough to the faucet’s matte-like appearance.). Buy the Grohe O ring. And if you use the old spring on the hose, don’t let it get tangled, lol.
piece détachée grohé
Cette piece détachée grohé s'ajuste parfaitement au robinet de l'évier.Juste un peu dur à visser,mais avec un peu d'huile cela s'est bien installé.Si cela dure autant que la pièce d'origine ( 9 ans ) ce sera super .
Snel en correct geregeld
Vervanger van bestaande sproeikop. Perfect.
muy caro
Tuve que comprar este grifo para sustituir uno igual que se me había estropeado. Es de muy buena marca, funciona muy bien y de buena calidad, pero sinceramente para ser un repuesto es excesivamente caro.
PARFAIT
Conforme à la pièce d'origine et moins cher qu'acheté directement auprès de la marque
Ersatzteil
Passt und funktioniert
Similar suggestions by Bolo
More from this brand
Similar items from “Shower Body Sprays”
Share with
Or share with link
https://www.bolo.ae/products/UO000DO8L38