Description:
Grohe, renowned for engineering excellence and the choice of discerning homeowners, applies the same superior craftsmanship to every Grohe product and spare part. Choosing genuine Grohe parts is your assurance that your Grohe product will continue to function as originally designed.
From the Manufacturer
Ladylux Plus / Euromix Faucet Cartridge. Faucet Cartridge. CERAMIC CART FOR LLUXPLS/EUROMX. Replacement Part.
Reviews:
5.0 out of 5 stars Works great on old Grohe bathroom faucet.
When my Grohe bathroom faucet broke I needed to replace the cartridge. The faucet is 25 years old sobI thought it was a long shot at finding anything. This worked great. Advice: after removing old cartridge, clean the part under it well. Don't scratch or chip anything. Spread plumbers silicone grease on the seals before inserting new one and tighten screws. No leaks and the faucet functions as good as new.
5.0 out of 5 stars Perfect fit
Why did you pick this product vs others?:Worked great in our sink!
4.0 out of 5 stars Fixed leaky faucet
Product worked well but enclosed instructions were quite vague. Took me 45 minutes to do a job I could do now in under 10.
5.0 out of 5 stars easy replacement
very easy to replace and the faucet works like new now.
5.0 out of 5 stars Straightforward (but not easy) repair for leaky Grohe Ladylux Plus faucet
It's pretty awesome that Grohe engineered their expensive faucets to use a relatively inexpensive one-piece replacement part to address leaks. My 10+ year old Ladylux Plus started leaking from the handle and googling the symptoms brought me to this cartridge on Bolo.The replacement cartridge was less than 10% of the cost of the original faucet and took me about 90 minutes to replace. Most of that time was trying to figure out how to remove the handle so I could gain access to the cartridge. If I had to do it again, it would probably take 10 minutes.Once you get the faucet handle off, replacement is relatively straightforward. Getting the faucet handle off mine was not easy. There is one screw to undo, but the handle was stuck firmly in place even after removing it. I ended up manhandling it off using a mallet to bang firmly but gently on the handle (not sure this helped that much) and screwdriver as a lever (this did the trick). I wedged the shaft of a flathead screwdriver between the short tail side of the handle and the cylindrical metal casing and levered it until it finally came off. As I worked on it, the entire old cartridge started to come apart inside. This disturbingly increasing looseness felt like I was breaking the whole faucet, but once I got it apart I realized that the old cartridge was taking the brunt of the force.I've attached a photo showing how the Ladylux Plus handle connects to the cartridge. The new cartridge is already installed. In my particular scenario, I had to re-use a few external fittings from around the original cartridge - the white collar around the cartridge as well as a plastic fitting that connects the metal elbow that the handle screws into. There's some gunk on the metal elbow where it attached to the handle - mineral deposits or corrosion that formed over time which I think made the handle hard to separate from the elbow. There were some leftover unnecessary parts that came in the new cartridge box that I didn't need.Protips:Cover your drain before unscrewing anything. You don't want to lose any parts down there.Take several sharp photo of the old cartridge and fittings as you take it out so you can recall how parts were oriented.Set aside plenty of time to work on this. If you're not mechanically inclined, invite a friend to hang out with you who is.All in all, I'm glad I was able to replace the cartridge and not the entire faucet. I do wish I had a photo like the one I'm attaching to guide me - all the diagrams I found were helpful but not literal enough to hint me into how much force I ended up needing to apply to get the handle off.
5.0 out of 5 stars Perfect replacement for my Grohe Bridgeford faucet
I noted that there was a slow leak coming from my six year old Grohe Bridgeford faucet, from right around the handle area. I did a google search and found that this was due to the cartridge, and that it needed replacement. Further googling I found that the cartridge part number for this faucet is 46048000.This particular faucet model is discontinued but replacement parts are still available. I found a plumbing supply shop that had the part, but on a whim, I decided to check Bolo.. lo and behold, here it is and at half the price of the plumbing supply shop. The relatively low price was a surprise, given that the cost of the faucet was an arm and a leg.This is an OEM replacement unit from Grohe, so no issues here. For the most part, the cartridge is exactly the same as the one I am replacing. However, my faucet had a rubber O-ring while this replacement model had a plastic sleeve. No problem - I just reused my old O-ring.Replacement was very straightforward, and I took care to take my time. I didn't take photos but I should have in order to remember the exact positions of the handle before I started. But that only slowed me down by a minute or so. You will need a phillips head screwdriver, and a 2.5 mm allen wrench. You will also need to shut off the water that feeds into this faucet. I estimated it took me 30 minutes (just being extra careful and examining each piece, testing the fit, positions, cleaning the reused parts, etc.) total. If I had to do it again, I could do it in 15 minutes now that I know what to do.I have another one of these faucets in the house, and if I was smart, I should buy another unit for that faucet, just in case (which at some point, the cartridge will need replacement in the future due to daily usage).
1.0 out of 5 stars Buy something else
These faucets are junk. I replaced the whole faucet because their parts to repair them don't even work. Overpriced junk.
2.0 out of 5 stars Missing parts
So this mixer worked. However the hardware was wrong/incomplete. recieved a long screw and a short screw. long was unusable so we reused the one for the mixer that failed after 4 years of light use. The plastic part that is supposed to allow for the handle sleeve to be screwed on does not fit the handle sleeve. We didn't use that part. The instructions for how to adjust flow were an icon that is explanatory, but lacks detail. each time you make a flow adjustment you have to take the whole thing apart to adjust flow. No instructions on how far to turn the screw to full open.
OK
Bien reçu à temps et en parfaite conformité avec la description et prix très intéressant
Perfekt spare part.
Perfekt what can i say about it.
Todo OK.
Repuesto para mi grifo de bañera de la marca, perfecto
Cartuccia miscelatore Grohe
Ottimo prodotto, acquistato per sostituire una vecchia cartuccia Grohe di 25 anni fa.Una raccomandazione, quando si toglie quella vecchia , assicuratevi ti togliere i vecchi originali della vecchia cartuccia, potrebbero essere caduti sul fondo del rubinetto.
交換簡単です
水漏れ止まりました。色違いますがぴったりの同品です。古くなると色んなパーツが固着して中々外れませんでしたが、叩いて外しました。
Visit the GROHE Store
Grohe 46048000 Single-Hand Mixing Valve Ceramic Cartridge, Unfinished
AED31047
Quantity:
Order today to get by 7-14 business days
This item qualifies for free delivery
Imported From: United States
At BOLO, we work hard to ensure the products you receive are new, genuine, and sourced from reputable suppliers.
BOLO is not an authorized or official retailer for most brands, nor are we affiliated with manufacturers unless specifically stated on a product page. Instead, we source verified sellers, authorized distributors or directly from the manufacturer.
Each product undergoes thorough inspection and verification at our consolidation and fulfilment centers to ensure it meets our strict authenticity and quality standards before being shipped and delivered to you.
If you ever have concerns regarding the authenticity of a product purchased from us, please contact Bolo Support. We will review your inquiry promptly and, if necessary, provide documentation verifying authenticity or offer a suitable resolution.
Your trust is our top priority, and we are committed to maintaining transparency and integrity in every transaction.
All product information, images, descriptions, and reviews originate from the manufacturer or from trusted sellers overseas. BOLO is not affiliated with, endorsed by, or an authorized retailer for most brands listed on our website unless stated otherwise.
While we strive to display accurate information, variations in packaging, labeling, instructions, or formulation may occasionally occur due to regional differences or supplier updates. For detailed or manufacturer-specific information, please contact the brand directly or reach out to BOLO Support for assistance.
Unless otherwise stated, all prices displayed on the product page include applicable taxes and import duties.
BOLO operates in accordance with the laws and regulations of United Arab Emirates. Any items found to be restricted or prohibited for sale within the UAE will be cancelled prior to shipment. We take proactive measures to ensure that only products permitted for sale in United Arab Emirates are listed on our website.
All items are shipped by air, and any products classified as “Dangerous Goods (DG)” under IATA regulations will be removed from the order and cancelled.
All orders are processed manually, and we make every effort to process them promptly once confirmed. Products cancelled due to the above reasons will be permanently removed from listings across the website.
Similar suggestions by Bolo
More from this brand
Similar items from “Cartridges”
Share with
Or share with link
https://www.bolo.ae/products/UO000C0OPAL
Visit the GROHE Store
Grohe 46048000 Single-Hand Mixing Valve Ceramic Cartridge, Unfinished
AED31047
Quantity:
Order today to get by 7-14 business days
This item qualifies for free delivery
Imported From: United States
At BOLO, we work hard to ensure the products you receive are new, genuine, and sourced from reputable suppliers.
BOLO is not an authorized or official retailer for most brands, nor are we affiliated with manufacturers unless specifically stated on a product page. Instead, we source verified sellers, authorized distributors or directly from the manufacturer.
Each product undergoes thorough inspection and verification at our consolidation and fulfilment centers to ensure it meets our strict authenticity and quality standards before being shipped and delivered to you.
If you ever have concerns regarding the authenticity of a product purchased from us, please contact Bolo Support. We will review your inquiry promptly and, if necessary, provide documentation verifying authenticity or offer a suitable resolution.
Your trust is our top priority, and we are committed to maintaining transparency and integrity in every transaction.
All product information, images, descriptions, and reviews originate from the manufacturer or from trusted sellers overseas. BOLO is not affiliated with, endorsed by, or an authorized retailer for most brands listed on our website unless stated otherwise.
While we strive to display accurate information, variations in packaging, labeling, instructions, or formulation may occasionally occur due to regional differences or supplier updates. For detailed or manufacturer-specific information, please contact the brand directly or reach out to BOLO Support for assistance.
Unless otherwise stated, all prices displayed on the product page include applicable taxes and import duties.
BOLO operates in accordance with the laws and regulations of United Arab Emirates. Any items found to be restricted or prohibited for sale within the UAE will be cancelled prior to shipment. We take proactive measures to ensure that only products permitted for sale in United Arab Emirates are listed on our website.
All items are shipped by air, and any products classified as “Dangerous Goods (DG)” under IATA regulations will be removed from the order and cancelled.
All orders are processed manually, and we make every effort to process them promptly once confirmed. Products cancelled due to the above reasons will be permanently removed from listings across the website.
Description:
Grohe, renowned for engineering excellence and the choice of discerning homeowners, applies the same superior craftsmanship to every Grohe product and spare part. Choosing genuine Grohe parts is your assurance that your Grohe product will continue to function as originally designed.
From the Manufacturer
Ladylux Plus / Euromix Faucet Cartridge. Faucet Cartridge. CERAMIC CART FOR LLUXPLS/EUROMX. Replacement Part.
Reviews:
5.0 out of 5 stars Works great on old Grohe bathroom faucet.
When my Grohe bathroom faucet broke I needed to replace the cartridge. The faucet is 25 years old sobI thought it was a long shot at finding anything. This worked great. Advice: after removing old cartridge, clean the part under it well. Don't scratch or chip anything. Spread plumbers silicone grease on the seals before inserting new one and tighten screws. No leaks and the faucet functions as good as new.
5.0 out of 5 stars Perfect fit
Why did you pick this product vs others?:Worked great in our sink!
4.0 out of 5 stars Fixed leaky faucet
Product worked well but enclosed instructions were quite vague. Took me 45 minutes to do a job I could do now in under 10.
5.0 out of 5 stars easy replacement
very easy to replace and the faucet works like new now.
5.0 out of 5 stars Straightforward (but not easy) repair for leaky Grohe Ladylux Plus faucet
It's pretty awesome that Grohe engineered their expensive faucets to use a relatively inexpensive one-piece replacement part to address leaks. My 10+ year old Ladylux Plus started leaking from the handle and googling the symptoms brought me to this cartridge on Bolo.The replacement cartridge was less than 10% of the cost of the original faucet and took me about 90 minutes to replace. Most of that time was trying to figure out how to remove the handle so I could gain access to the cartridge. If I had to do it again, it would probably take 10 minutes.Once you get the faucet handle off, replacement is relatively straightforward. Getting the faucet handle off mine was not easy. There is one screw to undo, but the handle was stuck firmly in place even after removing it. I ended up manhandling it off using a mallet to bang firmly but gently on the handle (not sure this helped that much) and screwdriver as a lever (this did the trick). I wedged the shaft of a flathead screwdriver between the short tail side of the handle and the cylindrical metal casing and levered it until it finally came off. As I worked on it, the entire old cartridge started to come apart inside. This disturbingly increasing looseness felt like I was breaking the whole faucet, but once I got it apart I realized that the old cartridge was taking the brunt of the force.I've attached a photo showing how the Ladylux Plus handle connects to the cartridge. The new cartridge is already installed. In my particular scenario, I had to re-use a few external fittings from around the original cartridge - the white collar around the cartridge as well as a plastic fitting that connects the metal elbow that the handle screws into. There's some gunk on the metal elbow where it attached to the handle - mineral deposits or corrosion that formed over time which I think made the handle hard to separate from the elbow. There were some leftover unnecessary parts that came in the new cartridge box that I didn't need.Protips:Cover your drain before unscrewing anything. You don't want to lose any parts down there.Take several sharp photo of the old cartridge and fittings as you take it out so you can recall how parts were oriented.Set aside plenty of time to work on this. If you're not mechanically inclined, invite a friend to hang out with you who is.All in all, I'm glad I was able to replace the cartridge and not the entire faucet. I do wish I had a photo like the one I'm attaching to guide me - all the diagrams I found were helpful but not literal enough to hint me into how much force I ended up needing to apply to get the handle off.
5.0 out of 5 stars Perfect replacement for my Grohe Bridgeford faucet
I noted that there was a slow leak coming from my six year old Grohe Bridgeford faucet, from right around the handle area. I did a google search and found that this was due to the cartridge, and that it needed replacement. Further googling I found that the cartridge part number for this faucet is 46048000.This particular faucet model is discontinued but replacement parts are still available. I found a plumbing supply shop that had the part, but on a whim, I decided to check Bolo.. lo and behold, here it is and at half the price of the plumbing supply shop. The relatively low price was a surprise, given that the cost of the faucet was an arm and a leg.This is an OEM replacement unit from Grohe, so no issues here. For the most part, the cartridge is exactly the same as the one I am replacing. However, my faucet had a rubber O-ring while this replacement model had a plastic sleeve. No problem - I just reused my old O-ring.Replacement was very straightforward, and I took care to take my time. I didn't take photos but I should have in order to remember the exact positions of the handle before I started. But that only slowed me down by a minute or so. You will need a phillips head screwdriver, and a 2.5 mm allen wrench. You will also need to shut off the water that feeds into this faucet. I estimated it took me 30 minutes (just being extra careful and examining each piece, testing the fit, positions, cleaning the reused parts, etc.) total. If I had to do it again, I could do it in 15 minutes now that I know what to do.I have another one of these faucets in the house, and if I was smart, I should buy another unit for that faucet, just in case (which at some point, the cartridge will need replacement in the future due to daily usage).
1.0 out of 5 stars Buy something else
These faucets are junk. I replaced the whole faucet because their parts to repair them don't even work. Overpriced junk.
2.0 out of 5 stars Missing parts
So this mixer worked. However the hardware was wrong/incomplete. recieved a long screw and a short screw. long was unusable so we reused the one for the mixer that failed after 4 years of light use. The plastic part that is supposed to allow for the handle sleeve to be screwed on does not fit the handle sleeve. We didn't use that part. The instructions for how to adjust flow were an icon that is explanatory, but lacks detail. each time you make a flow adjustment you have to take the whole thing apart to adjust flow. No instructions on how far to turn the screw to full open.
OK
Bien reçu à temps et en parfaite conformité avec la description et prix très intéressant
Perfekt spare part.
Perfekt what can i say about it.
Todo OK.
Repuesto para mi grifo de bañera de la marca, perfecto
Cartuccia miscelatore Grohe
Ottimo prodotto, acquistato per sostituire una vecchia cartuccia Grohe di 25 anni fa.Una raccomandazione, quando si toglie quella vecchia , assicuratevi ti togliere i vecchi originali della vecchia cartuccia, potrebbero essere caduti sul fondo del rubinetto.
交換簡単です
水漏れ止まりました。色違いますがぴったりの同品です。古くなると色んなパーツが固着して中々外れませんでしたが、叩いて外しました。
Similar suggestions by Bolo
More from this brand
Similar items from “Cartridges”
Share with
Or share with link
https://www.bolo.ae/products/UO000C0OPAL