
Description:
About this item:
3M Half Face Disposable Respirator Assembly 53P71 is NIOSH approved for respiratory protection against certain organic vapors and particulates up to 10x the permissible exposure limit (PEL). May be used in a variety of workplace applications including spray painting, pesticides, agriculture, construction, and transportation. Offers greater convenience by reducing the need for long-term maintenance - ideal choice for intermittent use. Warning: Respirators help protect against certain airborne contaminants. Before use, the wearer must read and understand the User Instructions provided as a part of the product packaging. Follow all local regulations. In the U. S. , a written respiratory protection program must be implemented meeting all the requirements of OSHA 29 CFR 1910. 134 including training, fit testing and medical evaluation. In Canada, CSA standards Z94. 4 requirements must be met and/or requirements of the applicable jurisdiction, as appropriate. Misuse may result in sickness or death. For correct use, consult supervisor and User Instructions, or call 3M Personal Safety Division (PSD) Technical Service in the U. S. A. at 1-800-243-4630. In Canada, call 1-800-267-4414. Disclaimer: 3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e. g. , for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e. g. , U. S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and limitations. Misuse of 3M industrial and occupational products may result in injury, sickness, or death. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
Review:
4.9 out of 5
98.33% of customers are satisfied
5.0 out of 5 stars Good all around
(function() { P.when('cr-A', 'ready').execute(function(A) { if(typeof A.toggleExpanderAriaLabel === 'function') { A.toggleExpanderAriaLabel('review_text_read_more', 'Read more of this review', 'Read less of this review'); } }); })(); .review-text-read-more-expander:focus-visible { outline: 2px solid #2162a1; outline-offset: 2px; border-radius: 5px; } works as expected to filter out all contaminants. Fits face well without pinching or leaking. I did not have to make this mask too tight to prevent leaks like other brands I have used. Replaceable filters work as expected. Be sure to match the filters with what you are using - particle filters are not good enough for solvents and chemicals etc., but that is common sense. Quality of this mask is very good so do not hesitate if you have a fairly normal sized face.
5.0 out of 5 stars Great Product
Does what it's designed to do and works perfectly.
5.0 out of 5 stars Best Value around, and it matters when your alternative is breathing in toxic fumes.
I use this for any and all of my garage/shop applications. Woodworking for dust and sanding, finishing with polyurethane or shellac to spray painting various projects and I just used it for cleaning some black mold under the kitchen sink. It came in a ziplock bag which I have come accustom to returning it to the bag I between uses. My last one did not and I had to clean it before I used it everytime. I do recommend putting a tissue or paper towel in the gar area when zipping up so any condensation you create isn't waiting for you next time you use it. For this price you ca will t beat the quality and versatility it has. It comes with 2 removable cartridges and 2 snap on filter holders to place outside the cartridges. The last model I had didnt have this option or didnt come with it making me think I was doing it all wrong before. This time I definitely feel safe and the quality is well worth the price on this one. It's at least 10-20 bucks more in a store. If I wear this one out il buy again 100% the last one lasted over 3 years and could have kept going had I taken care of it. Just be sure to change the cartridges as needed or recommend by the package.
4.0 out of 5 stars 3M P95 Respirator
The product worked as advertised.
5.0 out of 5 stars Very nice mask.
I think it probably works well, but I'm having problems with the fit, so I'm going to order a smaller size to see if it works better for me. I'm getting leakage around the upper part of the mask around my nose. I'm a guy with an average size face. When I get it on just right it keeps out some fumes, but highly volatile fumes from oil based wood coatings and paints are persistent and do get in (and I believe this is due to the mask not fitting me properly.) I'm looking forward to trying the smaller mask.There is a little bit of a learning curve, to learn how to adjust it, to learn how to test for leakage, etc. I also have not figured out how long it could be used before it has to be replaced. The instructions say that you should replace in 30 days if using with oil aerosols, but otherwise it would apparently last a lot longer. The instructions are unclear about that.I tried working with bleach and with non-oil paints, and smelled nothing when I had the mask on pretty tight.
5.0 out of 5 stars It works
Spray paint.
5.0 out of 5 stars Does the job
This weekend I used an airless sprayer to apply latex paint on about 2200 sq feet of ceiling, walls and floors. This respirator worked great. My airless sprayer produces an enormous amount of fine paint mist into the air. You have to wear a respirator. So much that when my wife opened the door to the room to inspect my progress she had to quickly close it back. The paint mist and fumes are too much.This mask has two cartridges that filter the air. Its comfortable and fit my face wel. I did not notice any leaking. Great product and reasonably priced.I looked at the pad filters after spraying both the primer and then finish coat on Saturday. Both were coated with paint. Did their job. I can’t imagine that getting into my lungs. Makes me wonder how many dumb mistakes I have made when using spray can paint in the past.
5.0 out of 5 stars Very comfortable and secure fit
Very comfortable and secure fit
excelente
(function() { P.when('cr-A', 'ready').execute(function(A) { if(typeof A.toggleExpanderAriaLabel === 'function') { A.toggleExpanderAriaLabel('review_text_read_more', 'Read more of this review', 'Read less of this review'); } }); })(); .review-text-read-more-expander:focus-visible { outline: 2px solid #2162a1; outline-offset: 2px; border-radius: 5px; } todos los materiales de esta mascara están excelentes, se amolda muy bien al rostro y es muy suave, incluye todo lo necesario para su almacenamiento y protección , los cartuchos no son intercambiables , una vez que se utiliza y ya no tiene capacidad de filtración es momento de remplazarla el conjunto completo. esta a muy buen precio, pero creo que si te interesa una mascara para tener y reutilizar esta no esta tu opción.
El respirador es mejor de lo que pensé.
He usado otro tipo de respiradores que no me han funcionado porque tengo el tabique de la nariz desviado, éste es el único respirador que he encontrado que viene muy amplio de la zona del tabique de la naríz para personas con problemas como yo o personas con tabique grande. Es muy cómoda y si que elimina el aroma de los solventes.
Extremadamente útil y necesaria en muchas tareas.
Muuuuy buena máscara. La verdad es que ha funcionado de maravilla y tan solo con lo que ha evitado que entre a mis pulmones y las implicaciones a mi salud ya valió lo que costó. Pronto tendré que reemplazar los filtros. Ya veré qué tal sale eso.
Muy bueno
Excelente producto
Visit the 3M Store
3M P95 Respirator, Half Face, Disposable, Spray Painting, Pesticides, Construction, 53P71, Large Size
AED26618
Quantity:
Order today to get by
Free delivery on orders over AED 200
Product origin: United States
Electrical items shipped from the US are by default considered to be 120v, unless stated otherwise in the product description. Contact Bolo support for voltage information of specific products. A step-up transformer is required to convert from 120v to 240v. All heating electrical items of 120v will be automatically cancelled.
Similar suggestions by Bolo
More from this brand
Similar items from “Cartridges & Filters”
Share with
Or share with link
https://www.bolo.ae/products/UO00079SBX0