Description:
J-B KwikWeld is a fast setting version of The Original J-B Weld two-part epoxy cold weld system that provides strong, lasting repairs to metal and multiple other surface types. After mixing, it forms a permanent bond and can be shaped, tapped, filed, sanded and drilled after curing. J-B KwikWeld has a 1:1 mixing ratio, sets in 6 minutes and is fully cured in 4-6 hours. J-B KwikWeld cures to a dark grey color, is rated at a tensile strength of 2424 PSI and will withstand temperatures up to 300ºF.
Reviews:
5.0 out of 5 stars Miracle Goop!
I got this to try and fix a hinge on my MSI laptop, which had suddenly given out one night when trying to close it (apparently that's a thing those computers are notorious for). Because of how the hinge was set up, I couldn't open or close the computer without the LCD screen trying to peel itself off the computer frame, which was always horrible to see. I used a C-clamp to keep the screen attached the frame, but that kept me from being able to actually close the laptop, effectively turning it into a small desktop computer.This wasn't super convenient and I needed to be able to pack my laptop for travel, so I decided to try epoxying the metal components of the hinge to the plastic of the frame to see if that would keep it together enough for me to able to open and close the computer without further damage happening. I had low expectations for how well this stuff would work, but I was on a time crunch and this was the most promising stuff I could find, so I gave it a go. I mixed it according to instructions (it has a bit of a funky chemical odor at this stage) , then quickly applied it inside the hinge to bond the metal and plastic. Then I used my trusty C-clamp to firmly keep the parts together while the epoxy cured. I left it like that for 24 hours (I think it normally takes 6 hours, but better safe than sorry), then gently removed the C-clamp. When I tried closing my computer.... it worked good as new! Literally, that hinge is sealed like a rock. It feels as strong as it did before it suddenly gave out. I also wiped off the excess epoxy while applying it, so while a little bit is still visible around the seams of the repair site, you'd never know it was there. No odor now that it cured, too. It's been about two weeks since I made the repair and the epoxy is still holding strong. I am not sure what else I would ever need to use this stuff on, but for small oddball repairs like mine, it was great. I'm confident that my laptop's life has been extended significantly, and if the other hinge goes out, I know exactly what to do. I never thought I'd get excited about epoxy, of all things, but believe me, this stuff is 100% worth it.
5.0 out of 5 stars A Must-Have Repair Epoxy That Actually Holds
A Must-Have Repair Epoxy That Actually HoldsI’ve used a lot of different adhesives and epoxies over the years, and this J-B Weld KwikWeld stands out because it’s both strong and easy to work with. It mixes smoothly, sets up quickly, and once cured it feels as solid as metal. I tried it on a small crack in a metal bracket and also on a plastic piece in the garage—both repairs have held up under stress. The quick set time means you don’t have to clamp things forever, but you do have enough working time to position parts properly before it hardens.One thing to keep in mind: once it sets, it’s not easy to undo, so make sure you’re precise in applying it. Also, while it bonds to many surfaces, for best results a clean, roughed-up surface makes a huge difference.Bottom line: A dependable, steel-reinforced epoxy that’s perfect to keep in the toolbox for quick, long-lasting fixes.
5.0 out of 5 stars It did the job for me!
I have a nice drinking cup i use for my tea. it's aluminum, and 1 liter. I thickened the handle to include a wood and leather grip, and have been happily sipping tea for years with it. The other day I accidentally knocked it off the counter and onto the floor. And the top part or the handle popped loose.Since i don't own an aluminum spot welder, I went looking for an epoxy that handled both heat, and aluminum well. I settled on this product as being something simple, easily mixed, easily applied and purported to be able to do the job.This was not my first rodeo with epoxies. I've been using them for years. But it was my first with aluminum, which is often tricky to deal with due to the oxidation layer creating a weaker bond. Preparation was necessary, which mostly meant sanding the crap out of the surfaces being bound. That removes the oxidized aluminum and gives an otherwise polished surface some roughness for the epoxy to grip.Following the instructions, and knowing about how much I'd need, I mixed an appropriate amount, applied it to the surfaces, then used a couple of rubber bands to hold it in place. It began to set fairly quickly, so if you do use it, be ready to apply it as soon as it's mixed. It says it's a 6 minute work time, and I'd say it's probably closer to 5. Having had epoxies set up quickly, I was ready for that possibility.I let it cure overnight, and in the morning, I had my tea as usual.The bond itself is fairly secure, with no apparent wiggle. The epoxy had a slightly soft texture at first as it set, but over time that's hardened up nicely. So, if you have aluminum you need bonded, I know this will work well, with the proper prep and after waiting the full cure time before messing with it. Knowing HOW to use an epoxy is most of the battle, so follow the steps and give yourself time for things to set and you'll love this stuff.
5.0 out of 5 stars Awesome epoxy!
The stuff works great! Super firm hold!
4.0 out of 5 stars Great job- awful smell
this stuff works great. i used it to hold a set of magnetic vise pads to the vise. the magnets were not strong enough. this did the trick. removed one star for a very bad smell. this stuff stinks.
Plastic and metal
Ok
Very good.
Used this on a metal coat rack to glue the pole-pieces together. Works fantastic and didn't need much product.
Prompt Delivery, good product
Very Nice Product and seller too
Fantastic product
6 minutes to mix up the paste, and you have such a strong joint on many surfaces
Useful for Metal
Fast delivery,Product says it contains steel in the glu. I can vouch for that, as I used this to glu magnets together and the excess wouldn’t wipe off after sanding, it just kept moving around. The steel powder leftover is some form of steel.Seems to be very strong, but not tested long enough.
Visit the J-B Weld Store
J-B Weld 8276 KwikWeld Quick Setting Steel Reinforced Epoxy - Dark Grey 2 oz
AED4054
Quantity:
Order today to get by 7-14 business days
Delivery fee of AED 20. Free for orders above AED 200.
Imported From: United States
At BOLO, we work hard to ensure the products you receive are new, genuine, and sourced from reputable suppliers.
BOLO is not an authorized or official retailer for most brands, nor are we affiliated with manufacturers unless specifically stated on a product page. Instead, we source verified sellers, authorized distributors or directly from the manufacturer.
Each product undergoes thorough inspection and verification at our consolidation and fulfilment centers to ensure it meets our strict authenticity and quality standards before being shipped and delivered to you.
If you ever have concerns regarding the authenticity of a product purchased from us, please contact Bolo Support. We will review your inquiry promptly and, if necessary, provide documentation verifying authenticity or offer a suitable resolution.
Your trust is our top priority, and we are committed to maintaining transparency and integrity in every transaction.
All product information, images, descriptions, and reviews originate from the manufacturer or from trusted sellers overseas. BOLO is not affiliated with, endorsed by, or an authorized retailer for most brands listed on our website unless stated otherwise.
While we strive to display accurate information, variations in packaging, labeling, instructions, or formulation may occasionally occur due to regional differences or supplier updates. For detailed or manufacturer-specific information, please contact the brand directly or reach out to BOLO Support for assistance.
Unless otherwise stated, all prices displayed on the product page include applicable taxes and import duties.
BOLO operates in accordance with the laws and regulations of United Arab Emirates. Any items found to be restricted or prohibited for sale within the UAE will be cancelled prior to shipment. We take proactive measures to ensure that only products permitted for sale in United Arab Emirates are listed on our website.
All items are shipped by air, and any products classified as “Dangerous Goods (DG)” under IATA regulations will be removed from the order and cancelled.
All orders are processed manually, and we make every effort to process them promptly once confirmed. Products cancelled due to the above reasons will be permanently removed from listings across the website.
More from this brand
Similar items from “Tile Epoxy Adhesives”
Share with
Or share with link
https://www.bolo.ae/products/UO0006B1VPL
Visit the J-B Weld Store
J-B Weld 8276 KwikWeld Quick Setting Steel Reinforced Epoxy - Dark Grey 2 oz
AED4054
Quantity:
Order today to get by 7-14 business days
Delivery fee of AED 20. Free for orders above AED 200.
Imported From: United States
At BOLO, we work hard to ensure the products you receive are new, genuine, and sourced from reputable suppliers.
BOLO is not an authorized or official retailer for most brands, nor are we affiliated with manufacturers unless specifically stated on a product page. Instead, we source verified sellers, authorized distributors or directly from the manufacturer.
Each product undergoes thorough inspection and verification at our consolidation and fulfilment centers to ensure it meets our strict authenticity and quality standards before being shipped and delivered to you.
If you ever have concerns regarding the authenticity of a product purchased from us, please contact Bolo Support. We will review your inquiry promptly and, if necessary, provide documentation verifying authenticity or offer a suitable resolution.
Your trust is our top priority, and we are committed to maintaining transparency and integrity in every transaction.
All product information, images, descriptions, and reviews originate from the manufacturer or from trusted sellers overseas. BOLO is not affiliated with, endorsed by, or an authorized retailer for most brands listed on our website unless stated otherwise.
While we strive to display accurate information, variations in packaging, labeling, instructions, or formulation may occasionally occur due to regional differences or supplier updates. For detailed or manufacturer-specific information, please contact the brand directly or reach out to BOLO Support for assistance.
Unless otherwise stated, all prices displayed on the product page include applicable taxes and import duties.
BOLO operates in accordance with the laws and regulations of United Arab Emirates. Any items found to be restricted or prohibited for sale within the UAE will be cancelled prior to shipment. We take proactive measures to ensure that only products permitted for sale in United Arab Emirates are listed on our website.
All items are shipped by air, and any products classified as “Dangerous Goods (DG)” under IATA regulations will be removed from the order and cancelled.
All orders are processed manually, and we make every effort to process them promptly once confirmed. Products cancelled due to the above reasons will be permanently removed from listings across the website.
Description:
J-B KwikWeld is a fast setting version of The Original J-B Weld two-part epoxy cold weld system that provides strong, lasting repairs to metal and multiple other surface types. After mixing, it forms a permanent bond and can be shaped, tapped, filed, sanded and drilled after curing. J-B KwikWeld has a 1:1 mixing ratio, sets in 6 minutes and is fully cured in 4-6 hours. J-B KwikWeld cures to a dark grey color, is rated at a tensile strength of 2424 PSI and will withstand temperatures up to 300ºF.
Reviews:
5.0 out of 5 stars Miracle Goop!
I got this to try and fix a hinge on my MSI laptop, which had suddenly given out one night when trying to close it (apparently that's a thing those computers are notorious for). Because of how the hinge was set up, I couldn't open or close the computer without the LCD screen trying to peel itself off the computer frame, which was always horrible to see. I used a C-clamp to keep the screen attached the frame, but that kept me from being able to actually close the laptop, effectively turning it into a small desktop computer.This wasn't super convenient and I needed to be able to pack my laptop for travel, so I decided to try epoxying the metal components of the hinge to the plastic of the frame to see if that would keep it together enough for me to able to open and close the computer without further damage happening. I had low expectations for how well this stuff would work, but I was on a time crunch and this was the most promising stuff I could find, so I gave it a go. I mixed it according to instructions (it has a bit of a funky chemical odor at this stage) , then quickly applied it inside the hinge to bond the metal and plastic. Then I used my trusty C-clamp to firmly keep the parts together while the epoxy cured. I left it like that for 24 hours (I think it normally takes 6 hours, but better safe than sorry), then gently removed the C-clamp. When I tried closing my computer.... it worked good as new! Literally, that hinge is sealed like a rock. It feels as strong as it did before it suddenly gave out. I also wiped off the excess epoxy while applying it, so while a little bit is still visible around the seams of the repair site, you'd never know it was there. No odor now that it cured, too. It's been about two weeks since I made the repair and the epoxy is still holding strong. I am not sure what else I would ever need to use this stuff on, but for small oddball repairs like mine, it was great. I'm confident that my laptop's life has been extended significantly, and if the other hinge goes out, I know exactly what to do. I never thought I'd get excited about epoxy, of all things, but believe me, this stuff is 100% worth it.
5.0 out of 5 stars A Must-Have Repair Epoxy That Actually Holds
A Must-Have Repair Epoxy That Actually HoldsI’ve used a lot of different adhesives and epoxies over the years, and this J-B Weld KwikWeld stands out because it’s both strong and easy to work with. It mixes smoothly, sets up quickly, and once cured it feels as solid as metal. I tried it on a small crack in a metal bracket and also on a plastic piece in the garage—both repairs have held up under stress. The quick set time means you don’t have to clamp things forever, but you do have enough working time to position parts properly before it hardens.One thing to keep in mind: once it sets, it’s not easy to undo, so make sure you’re precise in applying it. Also, while it bonds to many surfaces, for best results a clean, roughed-up surface makes a huge difference.Bottom line: A dependable, steel-reinforced epoxy that’s perfect to keep in the toolbox for quick, long-lasting fixes.
5.0 out of 5 stars It did the job for me!
I have a nice drinking cup i use for my tea. it's aluminum, and 1 liter. I thickened the handle to include a wood and leather grip, and have been happily sipping tea for years with it. The other day I accidentally knocked it off the counter and onto the floor. And the top part or the handle popped loose.Since i don't own an aluminum spot welder, I went looking for an epoxy that handled both heat, and aluminum well. I settled on this product as being something simple, easily mixed, easily applied and purported to be able to do the job.This was not my first rodeo with epoxies. I've been using them for years. But it was my first with aluminum, which is often tricky to deal with due to the oxidation layer creating a weaker bond. Preparation was necessary, which mostly meant sanding the crap out of the surfaces being bound. That removes the oxidized aluminum and gives an otherwise polished surface some roughness for the epoxy to grip.Following the instructions, and knowing about how much I'd need, I mixed an appropriate amount, applied it to the surfaces, then used a couple of rubber bands to hold it in place. It began to set fairly quickly, so if you do use it, be ready to apply it as soon as it's mixed. It says it's a 6 minute work time, and I'd say it's probably closer to 5. Having had epoxies set up quickly, I was ready for that possibility.I let it cure overnight, and in the morning, I had my tea as usual.The bond itself is fairly secure, with no apparent wiggle. The epoxy had a slightly soft texture at first as it set, but over time that's hardened up nicely. So, if you have aluminum you need bonded, I know this will work well, with the proper prep and after waiting the full cure time before messing with it. Knowing HOW to use an epoxy is most of the battle, so follow the steps and give yourself time for things to set and you'll love this stuff.
5.0 out of 5 stars Awesome epoxy!
The stuff works great! Super firm hold!
4.0 out of 5 stars Great job- awful smell
this stuff works great. i used it to hold a set of magnetic vise pads to the vise. the magnets were not strong enough. this did the trick. removed one star for a very bad smell. this stuff stinks.
Plastic and metal
Ok
Very good.
Used this on a metal coat rack to glue the pole-pieces together. Works fantastic and didn't need much product.
Prompt Delivery, good product
Very Nice Product and seller too
Fantastic product
6 minutes to mix up the paste, and you have such a strong joint on many surfaces
Useful for Metal
Fast delivery,Product says it contains steel in the glu. I can vouch for that, as I used this to glu magnets together and the excess wouldn’t wipe off after sanding, it just kept moving around. The steel powder leftover is some form of steel.Seems to be very strong, but not tested long enough.
More from this brand
Similar items from “Tile Epoxy Adhesives”
Share with
Or share with link
https://www.bolo.ae/products/UO0006B1VPL