An excellent low cost alternative for Bambu's textured PEI plate

S. · 29 September 2025

Reasons To Buy+ Works pretty much as well as Bambu's textured plate. I did a test print in PLA (90+% of my prints are PLA) with the same settings I normally use for Bambu's textured plate (60C bed temp) and got similar results to Bambu's plate. I used a metal scraper to scrape off some mouse ears that I added to the model, and the textured surface withstood the scraping very well.+ Low cost replacement for Bambu's OEM textured plate. Bambu sells theirs for $50 MSRP vs $20 for this one (price at time of review)+ Works with the X1/P1/A1 printers that have 257mm build plate (does not work with H2 or A1 MINI series)+ Has the same QR code on the plate as Bambu's plate+ The specs are pretty much the same a Bambu's, 0.5mm steel plate sandwiched by 0.075mm PEI coating+ The bed temperature specs are also a match for the Bambu plate, so you don't need to change any settings in your slicerHit or Miss* The plate is more flexible than Bambu's plate* The textured coating on the plate is less pronounced than Bambu's plate* Your results can vary with your materials and bed temps. Even with Bambu's OEM plate, I experienced mixed results until I increased the bed temp to 60C. Since I got good results using my preferred settings as Bambu's OEM plate, I did not test it with lower temps, since my go to plate for lower temps is a Biqu Cryogrip Panda plate that prints PLA reliably with a bed temp of 40C.Reasons Not To Buy- It's a good plate, but I have found using cool plates like those from Biqu to be more convenient, since I can get good adhesion from lower bed temps. Having said that, cool plates are twice the price of these plates.- Because it's not an OEM Bambu, the materials and long term durability might not be as good as Bambu's. Having said that, they are less than half the price, and so long as you don't abuse them and use them properly, they can still be a better deal than going with OEM Bambu.

Awesome build plate

C.3. · 29 September 2025

This double-sided textured PEI build plate has excellent adhesion and will also fit the Elegoo Centauri Carbon with no problems what-so-ever. The price point on this is excellent and below what others sell for.

Excellent Replacement P1S Build Plate With One Issue For Me

F. · 1 October 2025

I am always looking on Bolo for deals for BL P1S 3D printer parts and accessories so when I saw this build plate I jumped on it. I'm really glad that I did.I use my PEI build plate all the time and my current one is starting to wear out so I was really glad to see this form Yoopai. This plate is the exact size and has the same texture as my original one and is identical in size and almost shape as the BL one. It even has the identification code on it. My only complaint is that they didn't put the edge holes in the front edge like the BL has. I put handles on my plates that allows me to handle them much easier to remove prints and helps keep it clean. I deducted 1 star for this issue. Otherwise, it's a great deal.The price of this build plate is $16 and there is a coupon that lowers it to $14.39 right now which makes that a great buy for PEI build plate..I do recommend this Textured Build Plate for Bambu Lab 257x257mm from the YOOPAI Store if you need a new PEI build plate and I have had good luck with other purchases from this company.

Good adhesion. Measurements are actual plate dimensions.

S.M. · 4 October 2025

I got this to have as a second plate for my 3d printer. While the ad does specify this is for Bambu Lab printers, I got it to use with my centauri carbon, and it works fine.However, while the measurements in the ad for the build plate are exactly accurate, you'll want to make sure your build plates match this sizing. My factory build plate said 256x256, but that was the printable area, not the actual physical size, which was closer to 260x260. This plate is exactly 257x257 physical size.Adhesion wise, this plate works great. It's textured, but not aggressively. PLA adheres very well at a bed temperature of 60C. The plate is decently flexible, making part removal easy.This is a great spare/replacement build plate. If you plan to use this with other, non-specified printers, ensure it is suitably sized for your hot bed.

Solid replacement textured build plate -- basically identical to the OEM version.

N. · 30 September 2025

The media could not be loaded. I picked this up to work with my Bambu X1C since my original plate was starting to show some minor scratching from repeated use. This replacement offered identical specifications at a very attractive price point and was worth trying out.Based on a week of use this is a perfect drop-in replacement for your original build plate. It has a nearly identical texture on both sides as the original Bambu plate, and operates perfect at the same standard temperatures so you don't need to make any adjustments to your slice profiles. As an added plus this even has the same QR code so the plate is fully recognized by the detection system and throws no errors when you select textured plate with plate verification.As shown even from first print the bed adhesion was excellent and had no issues at all even with slightly damp PLA that hadn't been dried for a couple of weeks. I've popped out a dozen flawless prints since.Note that this isn't anything fancy like a cold temp plate -- it still requires standard PEI build plate temperatures, but that's exactly what I wanted in this case. Prints removed with ease and had the same texture as I expected off the original plate.