A brilliant, reliable workhorse filament.

S. · 30 October 2025

When it comes to 3D printing, having a reliable, no-fuss white PLA is essential, and this eSUN PLA Basic filament is exactly that. I've used several eSUN filaments before and this "Basic" line continues to deliver the quality I expect from the brand.The print quality is excellent. The white is a clean, bright, and opaque colour, perfect for all sorts of projects, from prototypes to finished pieces that need a clean look. I've experienced no issues with pigmentation consistency.Performance-wise, it's a dream to print with. It adheres perfectly to the build plate (I use a PEI sheet) and shows great layer adhesion, resulting in strong, clean prints. I've had no clogs, jams, or any extrusion problems. The dimensional accuracy, while listed at +/- 0.05mm, has been perfectly consistent and hasn't caused any issues whatsoever. It just works.I've attached a sample print used with this filament.The winding on the 1KG cardboard spool is neat and tidy, feeding smoothly into my printer without any risk of tangles.For the price, this is an outstanding filament. It's a fantastic, reliable workhorse that I will definitely be ordering again. If you just need a spool of white PLA that you can trust to get the job done without any hassle, this is a perfect choice. Highly recommended.

Great cheap filament.

M. · 10 February 2026

Prints clean and wound on the spool well. Filament can be quite brittle but not excessively so. It did snap once when feeding into the ams but if you're gentle, it's fine. Looks great especially for this low price.As its a cardboard spool, if you're using an AMS or any multi material system, make sure to print some strips for round the edges before using.

Great for Bambu lab

T. · 5 April 2026

Great colour filament, I have a Bambu lab P1S and usually go with eSUN for my filaments never had an issue, quality and price of them are great.

Good filament but disliked the cardboard spools

E.B. · 26 November 2025

I'm pretty pleased with how eSUN PLA performing in my Bambu P1S, on the whole. The first prints looked clean, the layers bonded well and the dimensional accuracy is impressive given the price. I ran a few functional pieces and they came out to spec without any obvious defects, which is always a nice relief.In use I did hit a minor hiccup: the cardboard spool wobbled slightly as it fed through my setup, and that caused a brief feed-issue (it flexed a little under tension). It didn’t stop the print, but it did introduce a tiny skip-line on one item.After reducing tension and securing the spool axis better the problem didn’t recur. So if you’re using it on high-speed or heavy extrusion prints, just check your spool setup.Overall though it’s good value and delivers strong performance out of the box. If you’re looking for a reliable standard filament that doesn’t cost the earth, I’d certainly recommend this one.

perfect for AMS use

m.j.l.d. · 16 September 2025

I’ve been using SUNLU PLA filament for a while now, and I’m really impressed with its consistency and performance. The filament comes well-spooled with minimal tangles, and it feeds perfectly through my printer every time. It prints smoothly, with excellent layer adhesion, and very little stringing or warping compared to other PLA brands I’ve tried.The finish on prints is clean and slightly glossy, which makes models and decorative pieces look professional. I’ve printed both detailed models and larger pieces, and it handles both equally well. Dimensional accuracy is reliable, so parts fit together as expected without post-processing adjustments.Another big plus is how easy PLA is to work with, and SUNLU’s quality makes it even better—strong enough for functional parts, but still easy to sand and paint if needed.Overall, SUNLU PLA is a top-notch filament that combines ease of use, excellent print quality, and reliable consistency. Definitely one I’ll keep stocked.

Bad Quality drop, tangled and kinked filament

R. · 5 March 2026

This is the third spool I bought and I am returning it now. First spool was great, but the other two since has been awful. Either bad batches or quality is going downhill. Had tangles, kinks, ones big enough to even get stuck in the printer. Adhesion and printing issues too, on files that I have tested and printed great with other filaments. Until they fix this, do not buy.

Good quality

d. · 11 April 2026

Despite the bad recommendations, this exceeded my expectations. Its definitely got a good value and is comparable to my other filaments. No complaints really as the quality is good and no tangles.

Fantastic Filament for Every Print!

M.J.B. · 23 September 2025

I’ve been using the eSUN PLA Filament in black for my 3D printing projects, and I couldn’t be happier! The dimensional accuracy of +/- 0.05mm is impressive, and I’ve noticed it results in clean, precise prints every time. I also love how well it adheres to the build plate, which has significantly reduced my print failures! The 1KG spool is a great value, and I appreciate that it feeds smoothly through my printer without jamming. While I haven't encountered any significant downsides, I make sure to store it properly to avoid moisture issues. If you're looking for reliable, high-quality filament, I wholeheartedly recommend giving this one a try!