
Description:
Note:Float used in conjunction with the relay can not be directly used with the power supply.
Specification:
Material: PP
Wire Diameter: 22AWG
Contract Rating (Max): 10W
Switching Voltage (Max): 110V DC
Switching Current (Max): 0.5A
Carry Current (Max): 1.0A
Contract Resistance (Max): 100ohm
Temperature Rating: -20 - +80 °C
Package Content:
2 x Liquid Water Level Sensor
2 x Spring Wire Connectors
Reviews:
5.0 out of 5 stars Works as expected
The media could not be loaded. Not fitted yet but it works as expected on trying it before fitting.
4.0 out of 5 stars Working well three months after installation
These float switches work well for a DIY project and seem reasonably priced for the quantity and quality. I've used them for a water pump cut off in a tank for a solar powered rainwater irrigation system in the garden. Be careful during installation not to stress the hinge lugs, I sheared one off on the first switch I installed by being a bit rough whilst trying to align it. That said you'll want to make sure you do align it carefully to make sure the float runs exactly vertically, the float can stick if its on a slight angle. Be aware that this is a low current switch so cannot handle very much load beyond a small LED, For anything larger you'll need a relay module and to us this switch as a trigger for it. The switch and wires are sealed into the body of the switch making it suitable for slightly humid environments around water containers - which is good given its job. Would be even more useful if they had slightly longer cables to reach a slightly more remote control box. Overall they have decent construction, function well making them good value.
5.0 out of 5 stars Great sensor.
Sensor works well, use for basement flood alarms, very reliable.
5.0 out of 5 stars Brilliant
In the picture it is the switch at the back, it was easier to fit another switch instead of trying to source the original what has been stuck in with sikaflex.A robust switch that is value for money, very easy to install, comes with a rubber seal that can be cut down to thickness of the tank.Drill the whole so the rubber seal is a slight squeeze to get insertClean off any rough edgesInsert the rubber seal then pull the switch through, while the switch is in cut round it with a Stanley knife to cut the seal flat to the tankTighten till the switch can’t really move on its own without force and you’re doneDo not over tighten as it won’t seal properly
Goed product.
Bolo’s keuze, en dat klopt ook.
Prijs kwaliteit ok
Prijs kwaliteit ok
Für Regenwasser perfekt
Funktionieren perfekt, so kann ich meinen Wassertank überwachen
Funciona muy bien
Lo he comprado por segunda vez para mis depósitos de agua del campo. Los anteriores que compré hace más de dos años funcionan perfectamente. Son muy resistentesEs buen producto 👌
Capteurs de Niveau de Liquide
Très bon produit reçu en parfait état , bon emballage correspond à mes attentes. Le délai de livraison a bien été respecté.
Visit the KUOQIY Store
2 PCS M12 10W Water Liquid Level Sensor, Horizontal Float Switch, PP Side-Mounted Water Level Sensor Controller, with Spring Wire Connectors, for Fish Tank Pool, Black
AED5863
Quantity:
Order today to get by 7-14 business days
Delivery fee of AED 20. Free for orders above AED 200.
Imported From: United Kingdom
At BOLO, we work hard to ensure the products you receive are new, genuine, and sourced from reputable suppliers.
BOLO is not an authorized or official retailer for most brands, nor are we affiliated with manufacturers unless specifically stated on a product page. Instead, we source verified sellers, authorized distributors or directly from the manufacturer.
Each product undergoes thorough inspection and verification at our consolidation and fulfilment centers to ensure it meets our strict authenticity and quality standards before being shipped and delivered to you.
If you ever have concerns regarding the authenticity of a product purchased from us, please contact Bolo Support. We will review your inquiry promptly and, if necessary, provide documentation verifying authenticity or offer a suitable resolution.
Your trust is our top priority, and we are committed to maintaining transparency and integrity in every transaction.
All product information, images, descriptions, and reviews originate from the manufacturer or from trusted sellers overseas. BOLO is not affiliated with, endorsed by, or an authorized retailer for most brands listed on our website unless stated otherwise.
While we strive to display accurate information, variations in packaging, labeling, instructions, or formulation may occasionally occur due to regional differences or supplier updates. For detailed or manufacturer-specific information, please contact the brand directly or reach out to BOLO Support for assistance.
Unless otherwise stated, all prices displayed on the product page include applicable taxes and import duties.
BOLO operates in accordance with the laws and regulations of United Arab Emirates. Any items found to be restricted or prohibited for sale within the UAE will be cancelled prior to shipment. We take proactive measures to ensure that only products permitted for sale in United Arab Emirates are listed on our website.
All items are shipped by air, and any products classified as “Dangerous Goods (DG)” under IATA regulations will be removed from the order and cancelled.
All orders are processed manually, and we make every effort to process them promptly once confirmed. Products cancelled due to the above reasons will be permanently removed from listings across the website.
More from this brand
Similar items from “Liquid Level Sensors”
Share with
Or share with link
https://www.bolo.ae/products/KO0QX11892J
Visit the KUOQIY Store
2 PCS M12 10W Water Liquid Level Sensor, Horizontal Float Switch, PP Side-Mounted Water Level Sensor Controller, with Spring Wire Connectors, for Fish Tank Pool, Black

AED5863
Quantity:
Order today to get by 7-14 business days
Delivery fee of AED 20. Free for orders above AED 200.
Imported From: United Kingdom
At BOLO, we work hard to ensure the products you receive are new, genuine, and sourced from reputable suppliers.
BOLO is not an authorized or official retailer for most brands, nor are we affiliated with manufacturers unless specifically stated on a product page. Instead, we source verified sellers, authorized distributors or directly from the manufacturer.
Each product undergoes thorough inspection and verification at our consolidation and fulfilment centers to ensure it meets our strict authenticity and quality standards before being shipped and delivered to you.
If you ever have concerns regarding the authenticity of a product purchased from us, please contact Bolo Support. We will review your inquiry promptly and, if necessary, provide documentation verifying authenticity or offer a suitable resolution.
Your trust is our top priority, and we are committed to maintaining transparency and integrity in every transaction.
All product information, images, descriptions, and reviews originate from the manufacturer or from trusted sellers overseas. BOLO is not affiliated with, endorsed by, or an authorized retailer for most brands listed on our website unless stated otherwise.
While we strive to display accurate information, variations in packaging, labeling, instructions, or formulation may occasionally occur due to regional differences or supplier updates. For detailed or manufacturer-specific information, please contact the brand directly or reach out to BOLO Support for assistance.
Unless otherwise stated, all prices displayed on the product page include applicable taxes and import duties.
BOLO operates in accordance with the laws and regulations of United Arab Emirates. Any items found to be restricted or prohibited for sale within the UAE will be cancelled prior to shipment. We take proactive measures to ensure that only products permitted for sale in United Arab Emirates are listed on our website.
All items are shipped by air, and any products classified as “Dangerous Goods (DG)” under IATA regulations will be removed from the order and cancelled.
All orders are processed manually, and we make every effort to process them promptly once confirmed. Products cancelled due to the above reasons will be permanently removed from listings across the website.
Description:
Note:Float used in conjunction with the relay can not be directly used with the power supply.
Specification:
Material: PP
Wire Diameter: 22AWG
Contract Rating (Max): 10W
Switching Voltage (Max): 110V DC
Switching Current (Max): 0.5A
Carry Current (Max): 1.0A
Contract Resistance (Max): 100ohm
Temperature Rating: -20 - +80 °C
Package Content:
2 x Liquid Water Level Sensor
2 x Spring Wire Connectors
Reviews:
5.0 out of 5 stars Works as expected
The media could not be loaded. Not fitted yet but it works as expected on trying it before fitting.
4.0 out of 5 stars Working well three months after installation
These float switches work well for a DIY project and seem reasonably priced for the quantity and quality. I've used them for a water pump cut off in a tank for a solar powered rainwater irrigation system in the garden. Be careful during installation not to stress the hinge lugs, I sheared one off on the first switch I installed by being a bit rough whilst trying to align it. That said you'll want to make sure you do align it carefully to make sure the float runs exactly vertically, the float can stick if its on a slight angle. Be aware that this is a low current switch so cannot handle very much load beyond a small LED, For anything larger you'll need a relay module and to us this switch as a trigger for it. The switch and wires are sealed into the body of the switch making it suitable for slightly humid environments around water containers - which is good given its job. Would be even more useful if they had slightly longer cables to reach a slightly more remote control box. Overall they have decent construction, function well making them good value.
5.0 out of 5 stars Great sensor.
Sensor works well, use for basement flood alarms, very reliable.
5.0 out of 5 stars Brilliant
In the picture it is the switch at the back, it was easier to fit another switch instead of trying to source the original what has been stuck in with sikaflex.A robust switch that is value for money, very easy to install, comes with a rubber seal that can be cut down to thickness of the tank.Drill the whole so the rubber seal is a slight squeeze to get insertClean off any rough edgesInsert the rubber seal then pull the switch through, while the switch is in cut round it with a Stanley knife to cut the seal flat to the tankTighten till the switch can’t really move on its own without force and you’re doneDo not over tighten as it won’t seal properly
Goed product.
Bolo’s keuze, en dat klopt ook.
Prijs kwaliteit ok
Prijs kwaliteit ok
Für Regenwasser perfekt
Funktionieren perfekt, so kann ich meinen Wassertank überwachen
Funciona muy bien
Lo he comprado por segunda vez para mis depósitos de agua del campo. Los anteriores que compré hace más de dos años funcionan perfectamente. Son muy resistentesEs buen producto 👌
Capteurs de Niveau de Liquide
Très bon produit reçu en parfait état , bon emballage correspond à mes attentes. Le délai de livraison a bien été respecté.
More from this brand
Similar items from “Liquid Level Sensors”
Share with
Or share with link
https://www.bolo.ae/products/KO0QX11892J