High quality, flawless finish, truly great value

P.M. · 2 January 2026

Genuinely surprised with this PLA filament. I only bought this for roughing and drafts because I was using so much of my "good stuff" on test prints. I didn't expect it to be... really, really good. It's labelled as PLA+ but at the £10 per kilo price range I was dubious, I thought maybe it's overselling itself a little. It's not. This is absolutely PLA+. I have Sunlu PLA+ and Bambu PLA+ and this is at least as good as those. There's genuinely no difference between this and the better known brands. I don't know what quality control is like because I've only bought one, maybe I got lucky... but somehow I doubt it. I feel like the majority of this filament comes from the same place and this is just targeting a different demographic. The cardboard spool fits on my Bambu A1 AMS very easily but it's snug and doesn't slip. It has indicator markings for remaining filament (Bambu doesn't have those) and view holes in the spool. The spool comes vacuum sealed too. All of my prints have stuck first time on the Bambu A1, the colour is consistently brilliant white and surface texture is smoooooooth. I've done one print on 0.12mm layers and it's great, the dwarf paladin 37mm figure is done at 0.12mm layers. It can and will go lower but I still have some work to do on that model before I get it down to the finest my machine will let me do which is 0.08 with my nozzle. I've added some photos. The 37mm paladin figure is at 0.12mm layers. The Bones of the Ivysaur are at 0.20mm layers and for me there's no need to go finer resolution than that for basically everything. The litter of articulated cats is at 0.24mm and printed them all in under an hour flawlessly. The spool doesn't come with an RFID device in it so it can declare what type of filament it is and it doesn't need to, those are pointless things anyway really. In Bambu Studio I've used the PLA profile for both Generic PLA and SunluPLA+, I've left it with the Sunlu PLA+ settings as I think the temperature and speed ranges match this filament more closely with that setting. NO bubbles, slips, pauses, or stringing... not even the finest of hairs left behind, it's sincerely done everything I've asked of it perfectly.I couldn't be happier with this, it's exceeded my expectations and produced nothing but perfect prints. Very highly recommended, at this price point even if you get a bad roll, which I doubt, it's STILL good for roughing and drafts and still cheap for that! Brilliant stuff, will absolutely be switching from Bambu to this. The Deeplee PLA+ is half the price of Bambu PLA basic, so I can do more faster, get better results, and it's half the price.

Reliable, Smooth, and Great‑Looking Prints

S. · 12 February 2026

The DEEPLEE PLA+ filament has been a fantastic upgrade for my 3D printing setup. The black PLA+ feeds smoothly, grips the bed nicely, and produces clean, sharp prints with a really sleek finish. No tangles, no weird brittleness, no drama — just consistent results from start to finish.Layer adhesion is solid, the spool winds neatly, and the filament handles both detailed models and functional parts without fuss. It’s strong enough to feel like an improvement over standard PLA, but still prints with the same easy, forgiving behaviour.For the price and performance, this filament is an absolute win. If you want dependable, high‑quality prints without babysitting your machine, this is a great choice.

Very good filament

H. · 6 March 2026

One of the best filaments I've ever used. It works on my bambu at full speed settings, I haven't dried it and I've had minimal/no stringing. It's makes very smooth prints and supports come off nice and easy too. Very very happy.

Great PLA High Speed Printing Filament with good look.

M.C.C. · 23 November 2025

This was the 1st Matte White PLA, I have brought!It prints very nicely indeed on my new Flashforge AD5X multi-colour Printer.The temps that the Orca Slicer set were, hot end 210 C & Bed 60 C.The flow rate of the PLA filament was set by the slicer to 100%, I normally set mine to 80 or 90% as I found through many years of doing it, that the flow rate make a big difference to the printing?But in this printer it seem fine.The filament looks great with a matte look not the normal shiny finish found on normal white PLA.Done some great models with it & since I have ywo spools in this set it makes it least hard to run out.The price was good for two of them, I would recommend this white matte PLA.

Good price

C. · 10 December 2025

Great product but 1 star less due to it being put on cardboard, I can't put it in my auto colour feeder due to delivery, the cardboard is slightly damaged

Quality filament

S.B. · 27 February 2026

Great value! Good quality. Prints well!

great voalue for money

N. · 20 September 2025

this was my first time using DEEPLEE PLA and it was some of nicest Filament to use as a beginerthe ease of use is amazing I had some lovely results. I have had no problems with clogging, or Adhesion as long as you stick to the directions and the advised temp range you'll be fine. prints in normal pla and the matte pla always have a lovely finish and texture and I have found the Colours to be very consistant. Great value for money and the filament quality is top notch.

Excellent material.

R.H. · 19 January 2026

I took a chance because of the price and i honestly can't believe how good it is printingExactly the same settings on printer and it's miles better looking than my more expensive rolls. Definitely buying more of this brand. Keep up the good work and thank you.