
Description:
Features:
*Made of high-quality materials and practical.
*Quick to install and easy to use.
*Made of high-quality materials, anti-corrosion, wear-resistant, and non-deformation.
Specification:
*Part name: Tailgate Release Switch
*Material: ABS
*Colour: Black
*Size: as shown in the picture
*OEM Number: 81260-G3000
*Installation : replacement installation
*High Universality Fitment:NO
Fitments:
For Hyundai For Elantra for GT 2018-2019
For Hyundai For Elantra for GT N Line 2019-2020
For Hyundai i30 2017+
For Hyundai i30 N 2017+
(Please refer to the pictures and check OE before purchasing)
Package Contents:
1* Tailgate Release Switch
Reviews:
3.0 out of 5 stars How to fit the switch - even if the cable is too short!
The robot review says this is easy to install - depends on your definition of easy. The pop-on covers in the tailgate must be removed, starting with the one below the window, then the two side bits and finally the main cover which is secured by four screws two easily visible and two hidden in the recesses either side of centre.Then remove the two bolts holding the boot latch and leave it dangling. The insignia bracket which contains the switch is secured by three nuts which, when removed, allow the assembly to be removed. Unclip the connector and free it from its clip. The switch is secured by two screws. Remove them, lift out the switch and thread the cable through the hole.THE CABLE ON THE REPLACEMENT SWITCH IS 1/2 INCH TOO SHORT. Unclip the loom and re-route to make it reach.Refitting is the reverse of the above.
Visit the ZYWUOY Store
ZYWUOY Rear Tailgate Release Switch, 81260-G3000, Manual Push Button, Black, For Hyundai Elantra GT 2018-2020 & i30 2017+
AED15064
Quantity:
Order today to get by 7-14 business days
Delivery fee of AED 20. Free for orders above AED 200.
Imported From: United Kingdom
At BOLO, we work hard to ensure the products you receive are new, genuine, and sourced from reputable suppliers.
BOLO is not an authorized or official retailer for most brands, nor are we affiliated with manufacturers unless specifically stated on a product page. Instead, we source verified sellers, authorized distributors or directly from the manufacturer.
Each product undergoes thorough inspection and verification at our consolidation and fulfilment centers to ensure it meets our strict authenticity and quality standards before being shipped and delivered to you.
If you ever have concerns regarding the authenticity of a product purchased from us, please contact Bolo Support. We will review your inquiry promptly and, if necessary, provide documentation verifying authenticity or offer a suitable resolution.
Your trust is our top priority, and we are committed to maintaining transparency and integrity in every transaction.
All product information, images, descriptions, and reviews originate from the manufacturer or from trusted sellers overseas. BOLO is not affiliated with, endorsed by, or an authorized retailer for most brands listed on our website unless stated otherwise.
While we strive to display accurate information, variations in packaging, labeling, instructions, or formulation may occasionally occur due to regional differences or supplier updates. For detailed or manufacturer-specific information, please contact the brand directly or reach out to BOLO Support for assistance.
Unless otherwise stated, all prices displayed on the product page include applicable taxes and import duties.
BOLO operates in accordance with the laws and regulations of United Arab Emirates. Any items found to be restricted or prohibited for sale within the UAE will be cancelled prior to shipment. We take proactive measures to ensure that only products permitted for sale in United Arab Emirates are listed on our website.
All items are shipped by air, and any products classified as “Dangerous Goods (DG)” under IATA regulations will be removed from the order and cancelled.
All orders are processed manually, and we make every effort to process them promptly once confirmed. Products cancelled due to the above reasons will be permanently removed from listings across the website.
Similar suggestions by Bolo
More from this brand
Similar items from “Boot”
Share with
Or share with link
https://www.bolo.ae/products/KO0Q8G36E4P
Visit the ZYWUOY Store
ZYWUOY Rear Tailgate Release Switch, 81260-G3000, Manual Push Button, Black, For Hyundai Elantra GT 2018-2020 & i30 2017+

AED15064
Quantity:
Order today to get by 7-14 business days
Delivery fee of AED 20. Free for orders above AED 200.
Imported From: United Kingdom
At BOLO, we work hard to ensure the products you receive are new, genuine, and sourced from reputable suppliers.
BOLO is not an authorized or official retailer for most brands, nor are we affiliated with manufacturers unless specifically stated on a product page. Instead, we source verified sellers, authorized distributors or directly from the manufacturer.
Each product undergoes thorough inspection and verification at our consolidation and fulfilment centers to ensure it meets our strict authenticity and quality standards before being shipped and delivered to you.
If you ever have concerns regarding the authenticity of a product purchased from us, please contact Bolo Support. We will review your inquiry promptly and, if necessary, provide documentation verifying authenticity or offer a suitable resolution.
Your trust is our top priority, and we are committed to maintaining transparency and integrity in every transaction.
All product information, images, descriptions, and reviews originate from the manufacturer or from trusted sellers overseas. BOLO is not affiliated with, endorsed by, or an authorized retailer for most brands listed on our website unless stated otherwise.
While we strive to display accurate information, variations in packaging, labeling, instructions, or formulation may occasionally occur due to regional differences or supplier updates. For detailed or manufacturer-specific information, please contact the brand directly or reach out to BOLO Support for assistance.
Unless otherwise stated, all prices displayed on the product page include applicable taxes and import duties.
BOLO operates in accordance with the laws and regulations of United Arab Emirates. Any items found to be restricted or prohibited for sale within the UAE will be cancelled prior to shipment. We take proactive measures to ensure that only products permitted for sale in United Arab Emirates are listed on our website.
All items are shipped by air, and any products classified as “Dangerous Goods (DG)” under IATA regulations will be removed from the order and cancelled.
All orders are processed manually, and we make every effort to process them promptly once confirmed. Products cancelled due to the above reasons will be permanently removed from listings across the website.
Description:
Features:
*Made of high-quality materials and practical.
*Quick to install and easy to use.
*Made of high-quality materials, anti-corrosion, wear-resistant, and non-deformation.
Specification:
*Part name: Tailgate Release Switch
*Material: ABS
*Colour: Black
*Size: as shown in the picture
*OEM Number: 81260-G3000
*Installation : replacement installation
*High Universality Fitment:NO
Fitments:
For Hyundai For Elantra for GT 2018-2019
For Hyundai For Elantra for GT N Line 2019-2020
For Hyundai i30 2017+
For Hyundai i30 N 2017+
(Please refer to the pictures and check OE before purchasing)
Package Contents:
1* Tailgate Release Switch
Reviews:
3.0 out of 5 stars How to fit the switch - even if the cable is too short!
The robot review says this is easy to install - depends on your definition of easy. The pop-on covers in the tailgate must be removed, starting with the one below the window, then the two side bits and finally the main cover which is secured by four screws two easily visible and two hidden in the recesses either side of centre.Then remove the two bolts holding the boot latch and leave it dangling. The insignia bracket which contains the switch is secured by three nuts which, when removed, allow the assembly to be removed. Unclip the connector and free it from its clip. The switch is secured by two screws. Remove them, lift out the switch and thread the cable through the hole.THE CABLE ON THE REPLACEMENT SWITCH IS 1/2 INCH TOO SHORT. Unclip the loom and re-route to make it reach.Refitting is the reverse of the above.
Similar suggestions by Bolo
More from this brand
Similar items from “Boot”
Share with
Or share with link
https://www.bolo.ae/products/KO0Q8G36E4P