Description:
Reviews:
5.0 out of 5 stars Must get more before stock lasts
💯 worth it. Bought it for my 600mm/s printer FF 5mpro, and it keeps up with the speeds and its PETG. Printed a load of cars and some in colour. i need to get orange and blue too. Thanks for a quality filament with a good pricing.
5.0 out of 5 stars I’ll use again
Good quality good price
5.0 out of 5 stars Pla
easy to use no clogging yet, well wrapped packaging, good quality prints so far
4.0 out of 5 stars Decent for the Price!
First off it’s a cheap filament, Secondly it’s PETG.I purchased PETG Grey to be exact.The fact that this comes in a recyclable box and a vacuum resealable bag with a silica gel packet should already give you high expectations, but I found that the filament meets the mark.You will have to get the settings dialled as you can see my first print didn’t go so well, The bed adhesion wasn’t great throughout and even come off the plate and a lot of filament tried printing in thin air once the print had collapsed luckily I managed to stop the print in time to save filament and discard the print.Printed at 195 nozzle / 60 bed /100mm/s speed2nd time printing after setting print temp to 230 and bed to 75, the bed adhesion was perfect I did however decrease my print speed also set that to 60mm/s and managed to get a completed Stitch Figure in 1hr 32mins with 30% infil and brim and supports, Happy with the filament now I know the settings to use.“It’s not always the filament that’s the issue, just your print settings” go over every setting and make sure you’ve dialled it in.I didn’t like that there is a case of stringing which I found the solve by using a lighter to melt the strings without any effect on the print itself but that’s not the point also there’s a colour shift in my print where the grey looks more light compared to the rest not a fan of that, No issues with clogging, No moisture issues it’s holding up so I recommend it.Printer - Anycubic Kobra 2 NeoAll the best printing!
5.0 out of 5 stars Good price
This is the first time using petg filament so wasn't sure how it would go but was ok, had a little bit of stringing to start but a few tweaks later things have been fine, now a good way through the roll & no problems would use again when needed.
1.0 out of 5 stars Lots of failed prints
Really hard to print with. I don’t know whether it’s too soft or whether the filament diameter isn’t consistent, but having tried nearly 20 prints with it now, more than 50% fail with the printer unable to pull the filament through. It will print fine for a bit and then the feed mechanism in the printer can’t grip a bit of the filament and it stops feeding.To be clear I have a fairly high end printer and I have never had this issue with any other TPU I have printed with before.Maybe it’s just this reel, but be warned you might be in for a frustrating time with lots of failed prints!
5.0 out of 5 stars Great PETG
Great filament. Used for several under bonnet applications and holds nicely. Strongly recommended as a good value for money. Easy to print with any printer. Great adhesion and finish.
5.0 out of 5 stars A very usable PETG, printed as simple as PLA, no drama
This PETG was an unknown, so I just used my PLA profile and took the temp up to 225C, bed 50C. This is Phil A Ment specifically made to test filament. Printed at .3 layer height to see the layers bonding, and to check how curves are handled, as well as find detail. At 40mms with two walls and no infill, this is pretty good as a first try. The layers all bonded well, the curves are good as there is no infill to grab, just the layer below. All the expected details are there, for a 100mm tall figure that takes an hour to print, a good filament, as its very strong and good colour saturation as it looks totally solid.
Bon rapport qualité prix pour ce filament
Ce filament est vraiment au top surtout pour le prix il fait vraiment le travail. Avec celui là j'ai pas eu besoin de mettre de la lac pour que le filament adhérent au plateaux avec une température a 60 degré il s'accroche super bien au plateau.En tout cas pour le prix de ce filament j'en suis très surpris et très satisfait.Merci
Molto buono
Il prodotto è buono, ovviamente trovati i parametri giusti nella stampante (io uso il piatto a 80° e l'ugello a 240°) il risultato è ok. Nulla da dire.
Bon filaments
Nickel, j'ai jamais eu de problème avec
Contentissimo
E' la primissima volta che utilizzo il PETG, ho sempre utilizzato il PLA e devo dire che con i parametri giusti e la ventola a zero ho avuto dei risultati ottimi. Il colore bianco è bello ed il materiale è resistente. Dalla foto si evince un primo layer perfetto che di solito dipende proprio da lui il buon esito di una stampa. Consigliatissimo!
Ottimo filamento!
Visit the Eono Store
Eono PLA Plus (PLA+) Filament 1.75 mm 3D Printer Filament Bundle Multi Color Filament for 3D Printer & 3D Pen, 10x250g Pack A
AED40832
Quantity:
Order today to get by 7-14 business days
This item qualifies for free delivery
'%3e%3crect%20x='0.599609'%20width='22.4'%20height='16'%20fill='%230A17A7'/%3e%3cpath%20fill-rule='evenodd'%20clip-rule='evenodd'%20d='M-0.426196%20-1.53223L9.1335%204.91587V-1.06506H14.4668V4.91648L24.0263%20-1.53147L25.2193%200.237148L17.6615%205.33494H23.0002V10.6683H17.6618L25.2187%2015.7655L24.0258%2017.5341L14.4668%2011.0865V17.0683H9.1335V11.0871L-0.425634%2017.5348L-1.61858%2015.7662L5.93947%2010.6683H0.600172V5.33494H5.93977L-1.61914%200.236387L-0.426196%20-1.53223Z'%20fill='white'/%3e%3cpath%20d='M15.5332%205.06615L25.6655%20-1.59961'%20stroke='%23DB1F35'%20stroke-width='0.533333'%20stroke-linecap='round'/%3e%3cpath%20d='M16.6094%2010.9578L25.6924%2017.0801'%20stroke='%23DB1F35'%20stroke-width='0.533333'%20stroke-linecap='round'/%3e%3cpath%20d='M7.00176%205.04727L-2.47266%20-1.33789'%20stroke='%23DB1F35'%20stroke-width='0.533333'%20stroke-linecap='round'/%3e%3cpath%20d='M8.02936%2010.8842L-2.47266%2017.8486'%20stroke='%23DB1F35'%20stroke-width='0.533333'%20stroke-linecap='round'/%3e%3cpath%20fill-rule='evenodd'%20clip-rule='evenodd'%20d='M0.599609%209.6H10.1996V16H13.3996V9.6H22.9996V6.4H13.3996V0H10.1996V6.4H0.599609V9.6Z'%20fill='%23E6273E'/%3e%3c/g%3e%3c/svg%3e)
Imported From: United Kingdom
At BOLO, we work hard to ensure the products you receive are new, genuine, and sourced from reputable suppliers.
BOLO is not an authorized or official retailer for most brands, nor are we affiliated with manufacturers unless specifically stated on a product page. Instead, we source verified sellers, authorized distributors or directly from the manufacturer.
Each product undergoes thorough inspection and verification at our consolidation and fulfilment centers to ensure it meets our strict authenticity and quality standards before being shipped and delivered to you.
If you ever have concerns regarding the authenticity of a product purchased from us, please contact Bolo Support. We will review your inquiry promptly and, if necessary, provide documentation verifying authenticity or offer a suitable resolution.
Your trust is our top priority, and we are committed to maintaining transparency and integrity in every transaction.
All product information, images, descriptions, and reviews originate from the manufacturer or from trusted sellers overseas. BOLO is not affiliated with, endorsed by, or an authorized retailer for most brands listed on our website unless stated otherwise.
While we strive to display accurate information, variations in packaging, labeling, instructions, or formulation may occasionally occur due to regional differences or supplier updates. For detailed or manufacturer-specific information, please contact the brand directly or reach out to BOLO Support for assistance.
Unless otherwise stated, all prices displayed on the product page include applicable taxes and import duties.
BOLO operates in accordance with the laws and regulations of United Arab Emirates. Any items found to be restricted or prohibited for sale within the UAE will be cancelled prior to shipment. We take proactive measures to ensure that only products permitted for sale in United Arab Emirates are listed on our website.
All items are shipped by air, and any products classified as “Dangerous Goods (DG)” under IATA regulations will be removed from the order and cancelled.
All orders are processed manually, and we make every effort to process them promptly once confirmed. Products cancelled due to the above reasons will be permanently removed from listings across the website.
Similar suggestions by Bolo
More from this brand
Similar items from “Filament 3D Printing Materials”
Share with
Or share with link
https://www.bolo.ae/products/KO0PK1TJ6KA
Visit the Eono Store
Eono PLA Plus (PLA+) Filament 1.75 mm 3D Printer Filament Bundle Multi Color Filament for 3D Printer & 3D Pen, 10x250g Pack A
AED40832
Quantity:
Order today to get by 7-14 business days
This item qualifies for free delivery
Imported From: United Kingdom
At BOLO, we work hard to ensure the products you receive are new, genuine, and sourced from reputable suppliers.
BOLO is not an authorized or official retailer for most brands, nor are we affiliated with manufacturers unless specifically stated on a product page. Instead, we source verified sellers, authorized distributors or directly from the manufacturer.
Each product undergoes thorough inspection and verification at our consolidation and fulfilment centers to ensure it meets our strict authenticity and quality standards before being shipped and delivered to you.
If you ever have concerns regarding the authenticity of a product purchased from us, please contact Bolo Support. We will review your inquiry promptly and, if necessary, provide documentation verifying authenticity or offer a suitable resolution.
Your trust is our top priority, and we are committed to maintaining transparency and integrity in every transaction.
All product information, images, descriptions, and reviews originate from the manufacturer or from trusted sellers overseas. BOLO is not affiliated with, endorsed by, or an authorized retailer for most brands listed on our website unless stated otherwise.
While we strive to display accurate information, variations in packaging, labeling, instructions, or formulation may occasionally occur due to regional differences or supplier updates. For detailed or manufacturer-specific information, please contact the brand directly or reach out to BOLO Support for assistance.
Unless otherwise stated, all prices displayed on the product page include applicable taxes and import duties.
BOLO operates in accordance with the laws and regulations of United Arab Emirates. Any items found to be restricted or prohibited for sale within the UAE will be cancelled prior to shipment. We take proactive measures to ensure that only products permitted for sale in United Arab Emirates are listed on our website.
All items are shipped by air, and any products classified as “Dangerous Goods (DG)” under IATA regulations will be removed from the order and cancelled.
All orders are processed manually, and we make every effort to process them promptly once confirmed. Products cancelled due to the above reasons will be permanently removed from listings across the website.
Description:
Reviews:
5.0 out of 5 stars Must get more before stock lasts
💯 worth it. Bought it for my 600mm/s printer FF 5mpro, and it keeps up with the speeds and its PETG. Printed a load of cars and some in colour. i need to get orange and blue too. Thanks for a quality filament with a good pricing.
5.0 out of 5 stars I’ll use again
Good quality good price
5.0 out of 5 stars Pla
easy to use no clogging yet, well wrapped packaging, good quality prints so far
4.0 out of 5 stars Decent for the Price!
First off it’s a cheap filament, Secondly it’s PETG.I purchased PETG Grey to be exact.The fact that this comes in a recyclable box and a vacuum resealable bag with a silica gel packet should already give you high expectations, but I found that the filament meets the mark.You will have to get the settings dialled as you can see my first print didn’t go so well, The bed adhesion wasn’t great throughout and even come off the plate and a lot of filament tried printing in thin air once the print had collapsed luckily I managed to stop the print in time to save filament and discard the print.Printed at 195 nozzle / 60 bed /100mm/s speed2nd time printing after setting print temp to 230 and bed to 75, the bed adhesion was perfect I did however decrease my print speed also set that to 60mm/s and managed to get a completed Stitch Figure in 1hr 32mins with 30% infil and brim and supports, Happy with the filament now I know the settings to use.“It’s not always the filament that’s the issue, just your print settings” go over every setting and make sure you’ve dialled it in.I didn’t like that there is a case of stringing which I found the solve by using a lighter to melt the strings without any effect on the print itself but that’s not the point also there’s a colour shift in my print where the grey looks more light compared to the rest not a fan of that, No issues with clogging, No moisture issues it’s holding up so I recommend it.Printer - Anycubic Kobra 2 NeoAll the best printing!
5.0 out of 5 stars Good price
This is the first time using petg filament so wasn't sure how it would go but was ok, had a little bit of stringing to start but a few tweaks later things have been fine, now a good way through the roll & no problems would use again when needed.
1.0 out of 5 stars Lots of failed prints
Really hard to print with. I don’t know whether it’s too soft or whether the filament diameter isn’t consistent, but having tried nearly 20 prints with it now, more than 50% fail with the printer unable to pull the filament through. It will print fine for a bit and then the feed mechanism in the printer can’t grip a bit of the filament and it stops feeding.To be clear I have a fairly high end printer and I have never had this issue with any other TPU I have printed with before.Maybe it’s just this reel, but be warned you might be in for a frustrating time with lots of failed prints!
5.0 out of 5 stars Great PETG
Great filament. Used for several under bonnet applications and holds nicely. Strongly recommended as a good value for money. Easy to print with any printer. Great adhesion and finish.
5.0 out of 5 stars A very usable PETG, printed as simple as PLA, no drama
This PETG was an unknown, so I just used my PLA profile and took the temp up to 225C, bed 50C. This is Phil A Ment specifically made to test filament. Printed at .3 layer height to see the layers bonding, and to check how curves are handled, as well as find detail. At 40mms with two walls and no infill, this is pretty good as a first try. The layers all bonded well, the curves are good as there is no infill to grab, just the layer below. All the expected details are there, for a 100mm tall figure that takes an hour to print, a good filament, as its very strong and good colour saturation as it looks totally solid.
Bon rapport qualité prix pour ce filament
Ce filament est vraiment au top surtout pour le prix il fait vraiment le travail. Avec celui là j'ai pas eu besoin de mettre de la lac pour que le filament adhérent au plateaux avec une température a 60 degré il s'accroche super bien au plateau.En tout cas pour le prix de ce filament j'en suis très surpris et très satisfait.Merci
Molto buono
Il prodotto è buono, ovviamente trovati i parametri giusti nella stampante (io uso il piatto a 80° e l'ugello a 240°) il risultato è ok. Nulla da dire.
Bon filaments
Nickel, j'ai jamais eu de problème avec
Contentissimo
E' la primissima volta che utilizzo il PETG, ho sempre utilizzato il PLA e devo dire che con i parametri giusti e la ventola a zero ho avuto dei risultati ottimi. Il colore bianco è bello ed il materiale è resistente. Dalla foto si evince un primo layer perfetto che di solito dipende proprio da lui il buon esito di una stampa. Consigliatissimo!
Ottimo filamento!
Similar suggestions by Bolo
More from this brand
Similar items from “Filament 3D Printing Materials”
Share with
Or share with link
https://www.bolo.ae/products/KO0PK1TJ6KA