5.0 out of 5 stars Vastly superior to the original.

A. · 10 September 2025

The media could not be loaded. A great replacement for the standard face pad. Very luxurious and comfortable feel. Very easy to replace and swap between the 2 pads that come with the kit. The nose guard is much better than the original, it keeps light out while not causing the screen to fog.A must have if you share use of the Quest headset, simply remove the pad away from the Velcro strip and fit the the alternative as it comes with 2. The soft leather type is my favourite although the silk feel type may be better under hot conditions, I am yet to test that. It is easy to refit the original, so the kids can use that one, if I let them have a go ;-)

4.0 out of 5 stars Pricey, but has some nice plus points.

y. · 10 September 2024

It's nice but overpriced. I got a £5 off at checkout but even that doesn't ease the pricing much. It has to be said though that there aren't many (if at all) replacement interfaces that have ventilation slots and adjustments for setting up distance from lenses. I have the bobovr m3 pro strap and this interface does work with it. A bit fiddly but it does work ok.One thing though that must be mentioned. The interface does not have side clips to lock it in place. It won't just fall out though. You just have to press inwards on either side now and then. I'm 50/50 on this. I found those release clips bloody awkward but in a way I wish this interface had something similar to make it feel more secure. On the plus side it is more comfortable than the original interface. I can play for longer and using the ice silk cushion pad is less itchy than the other pu leather. I have allergies, so a little sensitive to some things. I have it on the lower setting and it does make for a better wider viewing. The nose guard is a pain to fit. Mine fell off before I even installed the interface. I had to take a few pics on my phone to remind me incase it happened again. This is my last accessory for my Q3. It's pricey yes (lost a ⭐ for that), but there are some nice things with this....Height adjustable, vented to reduce fogging and more comfy too. So I'll let the cost slip. Just be aware of the lack of side clips to secure it. Although I'm sure there's folk out there were this doesn't bother them. Recommended 👍

5.0 out of 5 stars It's a cheap and easy way to make your VR experience much better.

J.G. · 24 July 2025

This AMVR face pad is a great upgrade for your VR headset.It's much more comfortable than the one it comes with, and the smooth material is easy to wipe clean after you sweat. Vents on the frame stop the screen from fogging up, and a small nose piece blocks out light.

5.0 out of 5 stars Best Face Cover for Q3.... Unless...

B. · 13 November 2024

You have a Halo head band.Default for Quest 3 is terrible.Besides the amazing headset itself, the face cover, head-band and batteries for Quest 3 are just not great... let us be honest they are not even good.So it is likely you will want to replace these weak parts with improvements.For Face covers there is very little wrong with this set, it is amoung the best.There are two types of covers, nand ose guard which is a tad annoying but the black out is awesome and the feel is great. Makes the standard headband much more tolerable.A bit of light bleeds from top but a thin black electric tape 100% fixes this if want, the reason this light is there is due to air vents, so great if can ignore the tiny tiny light showing.So where is the "unless" come into play if the Xover is so great?This is because the Forehead portion is much bigger than default Q3 Face cover. I tfeels so much more padded due to this increased size, and it is a most for this face cover but it is because it is bigger that it does not fit some halo style headbands.I did not know this size difference, so I feel I should warn others, make sure you check you current head band can support this face cover. The Face cover is made for Q3, but does not take Halo Head Bands into consideration.Now I have to decide the best Face Gaurd or the best Head band....

3.0 out of 5 stars Decent, but could do with improvements......refunded in the end

M. · 25 July 2024

A difficult review to write....Please see my enclosed photos.A three start review does not mean the product is not good. In this case it is adequate, but there is room for improvements.Opening the box, I was a little surprised at how fragile this face cover felt compared to the std one that comes with the Quest 3. But, the std one does not adjust as this one does to allow for a greater distance between your face and the lenses. And that aspect of the face pad has problems that I'll come back to later.The removal of the original face pad is easy enough, slight pressure to squeeze it as you gently pull to remove the clips from the base unit and it pops off.We decided to use the PU leather type covering, having later trying the fabric one with less success. The leather type covering seems to mould better to the face, my wife having a small head and mine being much larger. That means zero light leakage at the expense of it getting a little sweaty with prolonged use. It is easy to wipe, tho.The fabric one feels more comfortable, but it does not seal as effectively, it could do with being thicker. Also, we found we would be less likely to feel hot or sweat with the fabric design, it just leaked light tho.I do like that it is velcro that is used to fit the different material based pads, perhaps there could be others that would fit..?The nose piece, something the std face pad does not have, is "OK". Fitting it as described is easy enough, but when wearing you can still detect a slight amount of leakage around its sides. A small piece of black insulation tape each side resolved this. I'm not sure how this could be improved, we all have differing sizes of faces. But it can be resolved.Fitting of the face pad to the Quest 3 has to be done with extreme care. When the face pad arrives, it is set to "medium", as in the depth between the pad and the lenses. By doing that any pressure that you apply to press the face pad into the locking latches, there are four, will but a lot of pressure on these rather slim and weak latches on the face pad - see photos of the damaged one from our first face pad.We took extreme care when fitting, but they can so easily be damaged, this really needs to be addressed as it is a feature where users can change the setting of these, for those who wear glasses and those who do not.It is flimsy at best.Even tho I have been somewhat critical of the design and how it is implemented, we were still happy enough to order a replacement. That fitted perfectly fine, same amount of light pressure, and all was well. However, I would not wish to need to continue to change the setting of those latches.The minimal light bleed around the nose area is easy to reduce and impossible to do so with the std face pad.I have included a photo showing this face pad fitted with the KKCOBVR Q3 PRO Battery Head Strap, as that is a popular model to use. It fits with zero issues and combines wonderfully with that strap.Even with caution and understanding of its limitations I do not recommend this face pad, extended use has shown it provides less facial pressure and less associated pain and discomfort, but the head strap plays a part there. But the fragility of making adjustments for the depth control, and difficulty doing it, is not encouraging.In the end we refunded the replacement unit.I hope this review helps you.

Muy cómodo y útil

D. · 14 September 2025

La verdad que se nota si comparamos con el de serie. Es mas sueve, da menos calor y es mas llevadero usar las VR. El punto negativo yo diría es que a la hora de ajustar la distancia entre el visor y la cara tienes que desmontar el facial cada vez que quieras cambiar estoy aparte el sistema es muy rudimentario y no se si hasta será frágil.

From torture to enjoyment

n. · 6 October 2024

Quest 3 default interface gave me a headache within 15 minutes. This one is fantastic!

Ein Muss für die Quest

S. · 16 March 2025

Das AMVR Face Cover Pad für die Meta Quest 3 ist eine richtig gute Alternative zum Standard-Polster. Ich spiele oft längere Sessions, und das Original-Pad wurde schnell unangenehm – vor allem, wenn man mal ins Schwitzen kommt.Bequemer und angenehmer auf der HautDas Material fühlt sich viel weicher an als das Original und sitzt einfach besser. Besonders das Ice Silk Cotton macht einen Unterschied: Es bleibt länger kühl und sorgt dafür, dass sich die Brille auch nach einer Stunde noch angenehm trägt. Außerdem lässt sich das PU-Polster superleicht reinigen – einmal drüberwischen und fertig.Bessere Passform & weniger LichtlecksMir ist direkt aufgefallen, dass das neue Interface die Brille stabiler sitzen lässt. Gleichzeitig werden Lichtlecks reduziert, sodass man noch tiefer ins Spiel eintauchen kann. Gerade bei dunklen Szenen merkt man den Unterschied.FazitFür mich hat sich das Upgrade auf jeden Fall gelohnt. Das AMVR Face Cover Pad macht die Quest 3 nicht nur bequemer, sondern auch hygienischer – und das für einen fairen Preis. Wer viel in VR unterwegs ist, wird den Unterschied schnell merken!

Prodotto ben costruito, pienamente soddisfatto.

D. · 15 May 2025

Alcuni segnalano che la cover si sgancia troppo facilmente ed è vero ma, nel mio caso, ho spinto "molto" forte sul visore e si è agganciata bene eliminando il problema. La morbidezza del cuscino si percepisce immediatamente ed è molto confortevole rispetto all'originale, annullando quasi completamente la sensazione di pressione. Dopo una sessione di 3 ore i segni sul viso sono appena percepibili.Nonostante sia più "chiusa" (le alette nella zona naso mascherano completamente la luce), il ricambio d'aria e migliore grazie alle prese d'aria. Anche questo migliora il confort secondo me.Non ho testato l'altro cuscino più morbido che dovrebbe essere più traspirante (penso che tornerà utile quando sarà più caldo).Il prodotto è costruito molto bene, senza sbavature delle plastiche o difetti. Resta da testare la durata nel tempo ma per ora sono completamente soddisfatto, bravi AMVR, continuate così!

Amazing! Absolutely amazing! So much better than the stock padding, and love the cloth version!

A.C. · 28 July 2024

This is IT, this is the best!TLDR: Amazing, 10/10, so many amazing features and little neat things, absolutely worthwhile, hell even if it was 70$ I'd still go for it!I have used AMVR for my quest 2 for a long time, and recently upgraded to the quest 3.The only complaint I ever had with the quest 2 version was it got a bit sweaty and stinky quickly, but the version for the quest 3 took it to a whole new level, specifically the cloth version of the padding.The stock facial interface for the quest 3 is horrible, it has no give and is more of a buffer than a cushion, and the material was terrible, itchy and painful. I give it a 3/10.Now for the AMVR interface, lots of nice things to say! I haven't tried the regular 'leather' pad yet, as I was excited to try the cloth version and immediately swapped it over. Swapping the padding out is annoying and a bit tedious to get right, but it's absolutely worth it in the end. The cloth material of the padding is so smooth and soft I absolutely must figure out what it is so I can get a set of sheets and pillow covers of the same stuff. I put on the headset and played for a bit, the padding was amazing and allowed the headset to 'stick' to my head better because I could tighten it to my head more while it still being infinitely more comfortable. The cloth is an extremely nice feature as the material lets my forehead breath and I no longer need to take off my VR to wipe literal drips off my head like a skit in a spongebob episode. The padding is immaculately soft and I need to find out what that is too so I can get a pillow made from it. As for the other features/general stuff. Installing the interface itself was a little tricky, since it didn't quite want to click in since I hadn't taken my strap off beforehand, but eventually it stuck. As for the adjustment on it, all you need to do is press the plastic inwards since it has a slot system resembling the slots on the shifter of a manual car. Because of this system the plastic feels much more stable and less wiggly, and you don't need to worry about it changing setting on it's own either which is nice. The nose gasket/light blocker is a nice touch too, the old quest 2 version's gasket would poke me in the eyes since the rubber material was too long but it's very pleasant here, and when you swing your head around usually the edges of the lenses would dig into your nose a bit, and with this it also acts as padding for your nose taking it from painful to mildly uncomfortable.Overall, amazing! Love this thing and it's so much better than stock, feels high quality and it's just perfect!My only 'gripe' is that when I took off the 'leather' padding the velcro strips on the plastic bit lifted up a little, but I pressed it back down and it stuck firmly even after fiddling with it for a long while, so probably just a 1/100 random issue.