Description:
Reviews:
5.0 out of 5 stars Great cost
Awesome ASA with good value for money. Much cheaper than others and extremely good product. Not as bad smelling as ABS but also has similar issues with warping and adhesion so an enclosure is recommended
5.0 out of 5 stars White ABS+, Prints really great, zero stringing
Printing White ABS+ on my ender 3 on a glass bed. At print temp of 240 there is zero stringing and very little oozing on my bowden setup with a .6mm nozzle at 2.1mm retractions. I had one print remove itself from the bed due to user error (opened enclosure and forgot) and the resulting spagetti was al in small, neat 1 - 2 cm pieces. So even with nothing to anchor to the plastic fully severed.Bed temp 105 and it sticks perfectly and releases perfectly as the bed cools.Separates from supports with a .2mm gap with ease.There appears to be almost zero shrinkage as long as the enclosure stays shut. Cooling fan is required for quality but it does not seem to negatively effect the strength or adhesion with this ABS+. I had to go to 100% on mine but it's just a stock fan and more was not needed.
5.0 out of 5 stars Easy to print
The media could not be loaded. Very nice and easy to print ABS+NO Stringing or wraping. Spool are clean winding and tangle free. At 100⁰C adhesion is amazingColor is very decentHighy recommended this ABS+ definitley will buy again
1.0 out of 5 stars Had layer separation, even when dried
This is a review of Eryone, white ASA filament.*** Edit *** 19/01/2024Although I said below that it seemed ok, when it had been dried, this later proved not to be case.I went back to one of the original prints that had previously suffered with layer separation, after the filament had been thoroughly dried and you can see the separation in the picture - not good at all.This was printed on a Prusa MK3S in a Lack enclosure, at temperatures 260/110 with an enclosure temperature of about 30 -35, my usual setup for ASA and works great with Prusament ASA.This filament is ok-ish for small, or thin prints but not good for chunkier stuff.Shame, I love Eryone PETG, but this isn't up to that quality.***** This below is my first impression, which changed as detailed aboveInitial Short story:Once I figured out it was wet, and dried it for 4 hours it turned out great.Initial Long story:Eryone has been my go-to for PETG for a long time.I'd only ever used Prusament ASA previously, which is great but, both expensive and slow to get hold of.So, as a fact finding mission, I tried some Eryone ASA white (always a tricky colour, apparently because of the dye) when it was on offer.It was sealed very well, and I had no thoughts of it being damp; my first print warped very badly on the bed, so I added some brims and some Magigoo - two prints then only slightly warped, but there was still some layer separation. Fixable with some acetone welding as they were just brackets, but not ideal at all.As a last chance saloon sort of thing I dried it out for 4 hours and tried again on another print, and the print was perfect - no warping and no layer separation - great!So, good news, it is great filament and I will buy it again but definitely dry it out before I use it.
5.0 out of 5 stars First ABS try!!
First time using Eryone ABS+ White, and also my first print with a new printer. I had to play with the settings quite a bit, but once dialed in, the filament performed great, smooth extrusion, strong layers, and a nice clean finish. For a first attempt, I’m really happy with how it turned out.
4.0 out of 5 stars Very very strong parts, but a handful to work with.
Lives up to its reputation for being difficult. First attempt at a small part (260C/70C/fan off) looked good at first, but delaminated easily. Jacking the bed temperature up to 80C, the part came loose and went 'spaghetti'. Third go, bed back to 70C but print speed down to 40mm/sec things look very good, excellent strength and 1mm holes cross ways through the shaft came out clear.I then got some specific nylon bed glue and went for the big gear I had in mind. Sadly the ends lifted and so wrecked the part, it is 235 mm long, so only fits on the bed diagonally, which is asking for trouble. I'll be trying to make this in two parts next.
5.0 out of 5 stars ABS easier than I thought!
As someone who's always stuck with PLA, I decided to give ABS+ a try, and I'm thrilled with the results. Here's why:- First-time ABS user, and found it incredibly easy to use and tune in.- Temperature: Optimal printing temperature achieved at 230°C.- Speed: Printed smoothly at a speed of 50mm/s.- No warping issues experienced on my Bambu Labs X1C printer.In conclusion, this filament prints beautifully with strong, high-quality results. I'm impressed by its performance and durability. Plus, the spool is well-wound, making printing a breeze. Highly recommended for those seeking reliable ABS+ filament for their projects!
5.0 out of 5 stars Great but off white colour.
This is great filament (white) I had no problem printing on Qidi X-Plus 3. It is not brilliant white but sort of off white, this didn't bother me but may be important to others.
Un filament de qualité pour des impressions 3D sans faille!
J’ai récemment essayé le filament ERYONE ABS Plus en 1.75mm pour ma imprimante 3D et je suis vraiment satisfait du résultat. Ce filament noir a une qualité exceptionnelle, avec une précision de +/- 0.03mm, ce qui garantit des impressions nettes et détaillées à chaque fois.Il se manipule facilement : il n’y a pas de bourrage, il fond bien à des températures standard et adhère parfaitement sur le plateau de mon imprimante. Les pièces imprimées sont solides et bien finis, avec une surface lisse et une excellente résistance aux chocs.De plus, le rouleau de 1kg est très pratique, il permet de réaliser de nombreuses impressions avant de devoir changer de filament. C’est définitivement un choix judicieux pour les amateurs de 3D comme moi, à la recherche de fiabilité et de qualité. Je le recommande vivement!
Sehr zufrieden – problemloses ABS+ Filament
ch bin mit dem ERYONE ABS+ Filament sehr zufrieden. Es ließ sich auf meinem Bambu P1S problemlos verarbeiten. Die Betthaftung war absolut unproblematisch – wobei ich für all meine Drucke ein bekanntes Haftungsspray nutze.Gedruckt habe ich mit den generischen ABS-Einstellungen, ohne dass ich etwas anpassen musste. Die Ergebnisse sind sauber, stabil und machen einen sehr zuverlässigen Eindruck. Besonders positiv fand ich auch, dass ich beim Drucken keinerlei störende Gerüche wahrgenommen habe.Ein geschlossener Bauraum ist meiner Meinung nach wichtig, aber wenn das gegeben ist, bekommt man ein sehr gutes, einfach zu handhabendes ABS+ Filament mit stabilen Druckresultaten. Klare Empfehlung!
Ottimo prodotto
Stampato per il momento solo pezzi di dimensioni ridotte ma il risultato è stato ottimo. Impostazioni Anycubic Kobra S1 per filamento ASA. Odore piuttosto forte, nonstante la stampante chiusa
PP takes a little getting used to.
Gosh this stuff is... Interesting let's say. Had troubles but I expected it. Bonds nice to Poly sheets I bought on Bolo. Kinda like a big sticky piece of tape. Near impossible to remove from tape so whatever your print side touching the build plate is, expect an odd glassy plastic tape look. But yes it prints fine. I had heated chamber about 65c. I forget other specs but I used the mod specs on the box. Nearly indestructible stuff. Limited use or needs but it fills a niche. I think I printed an 8 or 10 line outside brim. A few failures but by the end printing a a roughly 1.5x2 in part only one or attempts pulled up. Mostly because I used a partial pp sheet and part was near the edge and it pulled it right up. If I stayed at least 2" from edge, no issue and little pull up. Play with, expect failures but it absolutely can be printed
Se imprime muy bien
Se imprime muy facil, incluso mas que el ABS.Es la primera vez que pruebo este material, y de momento encantado con el resultado.Nozzle 255°C y cama a 110°C e impresora cerrada.Con un poco de adhesivo en la cama no he tenido ningun problema de warping.Lo he cogido por las especificaciones del material, ya que quiero hacer unas piezas para el coche, y el PLA se deforma y el ABS se vuelve quebradizo.El bobinado es muy bueno y el vacio correcto.Recomendado
Visit the ERYONE Store
ERYONE Engineering Filament, 1.75mm 3D Printing Filament, Dimensional Accuracy +/- 0.03mm, Fit Most FDM 3D Printers, ASA Black 1kg Spool (2.2LBS)
AED15087
Quantity:
Order today to get by 7-14 business days
Delivery fee of AED 20. Free for orders above AED 200.
'%3e%3crect%20x='0.599609'%20width='22.4'%20height='16'%20fill='%230A17A7'/%3e%3cpath%20fill-rule='evenodd'%20clip-rule='evenodd'%20d='M-0.426196%20-1.53223L9.1335%204.91587V-1.06506H14.4668V4.91648L24.0263%20-1.53147L25.2193%200.237148L17.6615%205.33494H23.0002V10.6683H17.6618L25.2187%2015.7655L24.0258%2017.5341L14.4668%2011.0865V17.0683H9.1335V11.0871L-0.425634%2017.5348L-1.61858%2015.7662L5.93947%2010.6683H0.600172V5.33494H5.93977L-1.61914%200.236387L-0.426196%20-1.53223Z'%20fill='white'/%3e%3cpath%20d='M15.5332%205.06615L25.6655%20-1.59961'%20stroke='%23DB1F35'%20stroke-width='0.533333'%20stroke-linecap='round'/%3e%3cpath%20d='M16.6094%2010.9578L25.6924%2017.0801'%20stroke='%23DB1F35'%20stroke-width='0.533333'%20stroke-linecap='round'/%3e%3cpath%20d='M7.00176%205.04727L-2.47266%20-1.33789'%20stroke='%23DB1F35'%20stroke-width='0.533333'%20stroke-linecap='round'/%3e%3cpath%20d='M8.02936%2010.8842L-2.47266%2017.8486'%20stroke='%23DB1F35'%20stroke-width='0.533333'%20stroke-linecap='round'/%3e%3cpath%20fill-rule='evenodd'%20clip-rule='evenodd'%20d='M0.599609%209.6H10.1996V16H13.3996V9.6H22.9996V6.4H13.3996V0H10.1996V6.4H0.599609V9.6Z'%20fill='%23E6273E'/%3e%3c/g%3e%3c/svg%3e)
Imported From: United Kingdom
At BOLO, we work hard to ensure the products you receive are new, genuine, and sourced from reputable suppliers.
BOLO is not an authorized or official retailer for most brands, nor are we affiliated with manufacturers unless specifically stated on a product page. Instead, we source verified sellers, authorized distributors or directly from the manufacturer.
Each product undergoes thorough inspection and verification at our consolidation and fulfilment centers to ensure it meets our strict authenticity and quality standards before being shipped and delivered to you.
If you ever have concerns regarding the authenticity of a product purchased from us, please contact Bolo Support. We will review your inquiry promptly and, if necessary, provide documentation verifying authenticity or offer a suitable resolution.
Your trust is our top priority, and we are committed to maintaining transparency and integrity in every transaction.
All product information, images, descriptions, and reviews originate from the manufacturer or from trusted sellers overseas. BOLO is not affiliated with, endorsed by, or an authorized retailer for most brands listed on our website unless stated otherwise.
While we strive to display accurate information, variations in packaging, labeling, instructions, or formulation may occasionally occur due to regional differences or supplier updates. For detailed or manufacturer-specific information, please contact the brand directly or reach out to BOLO Support for assistance.
Unless otherwise stated, all prices displayed on the product page include applicable taxes and import duties.
BOLO operates in accordance with the laws and regulations of United Arab Emirates. Any items found to be restricted or prohibited for sale within the UAE will be cancelled prior to shipment. We take proactive measures to ensure that only products permitted for sale in United Arab Emirates are listed on our website.
All items are shipped by air, and any products classified as “Dangerous Goods (DG)” under IATA regulations will be removed from the order and cancelled.
All orders are processed manually, and we make every effort to process them promptly once confirmed. Products cancelled due to the above reasons will be permanently removed from listings across the website.
Similar suggestions by Bolo
More from this brand
Similar items from “Filament 3D Printing Materials”
Share with
Or share with link
https://www.bolo.ae/products/KO0P5U85JWE
Visit the ERYONE Store
ERYONE Engineering Filament, 1.75mm 3D Printing Filament, Dimensional Accuracy +/- 0.03mm, Fit Most FDM 3D Printers, ASA Black 1kg Spool (2.2LBS)
AED15087
Quantity:
Order today to get by 7-14 business days
Delivery fee of AED 20. Free for orders above AED 200.
Imported From: United Kingdom
At BOLO, we work hard to ensure the products you receive are new, genuine, and sourced from reputable suppliers.
BOLO is not an authorized or official retailer for most brands, nor are we affiliated with manufacturers unless specifically stated on a product page. Instead, we source verified sellers, authorized distributors or directly from the manufacturer.
Each product undergoes thorough inspection and verification at our consolidation and fulfilment centers to ensure it meets our strict authenticity and quality standards before being shipped and delivered to you.
If you ever have concerns regarding the authenticity of a product purchased from us, please contact Bolo Support. We will review your inquiry promptly and, if necessary, provide documentation verifying authenticity or offer a suitable resolution.
Your trust is our top priority, and we are committed to maintaining transparency and integrity in every transaction.
All product information, images, descriptions, and reviews originate from the manufacturer or from trusted sellers overseas. BOLO is not affiliated with, endorsed by, or an authorized retailer for most brands listed on our website unless stated otherwise.
While we strive to display accurate information, variations in packaging, labeling, instructions, or formulation may occasionally occur due to regional differences or supplier updates. For detailed or manufacturer-specific information, please contact the brand directly or reach out to BOLO Support for assistance.
Unless otherwise stated, all prices displayed on the product page include applicable taxes and import duties.
BOLO operates in accordance with the laws and regulations of United Arab Emirates. Any items found to be restricted or prohibited for sale within the UAE will be cancelled prior to shipment. We take proactive measures to ensure that only products permitted for sale in United Arab Emirates are listed on our website.
All items are shipped by air, and any products classified as “Dangerous Goods (DG)” under IATA regulations will be removed from the order and cancelled.
All orders are processed manually, and we make every effort to process them promptly once confirmed. Products cancelled due to the above reasons will be permanently removed from listings across the website.
Description:
Reviews:
5.0 out of 5 stars Great cost
Awesome ASA with good value for money. Much cheaper than others and extremely good product. Not as bad smelling as ABS but also has similar issues with warping and adhesion so an enclosure is recommended
5.0 out of 5 stars White ABS+, Prints really great, zero stringing
Printing White ABS+ on my ender 3 on a glass bed. At print temp of 240 there is zero stringing and very little oozing on my bowden setup with a .6mm nozzle at 2.1mm retractions. I had one print remove itself from the bed due to user error (opened enclosure and forgot) and the resulting spagetti was al in small, neat 1 - 2 cm pieces. So even with nothing to anchor to the plastic fully severed.Bed temp 105 and it sticks perfectly and releases perfectly as the bed cools.Separates from supports with a .2mm gap with ease.There appears to be almost zero shrinkage as long as the enclosure stays shut. Cooling fan is required for quality but it does not seem to negatively effect the strength or adhesion with this ABS+. I had to go to 100% on mine but it's just a stock fan and more was not needed.
5.0 out of 5 stars Easy to print
The media could not be loaded. Very nice and easy to print ABS+NO Stringing or wraping. Spool are clean winding and tangle free. At 100⁰C adhesion is amazingColor is very decentHighy recommended this ABS+ definitley will buy again
1.0 out of 5 stars Had layer separation, even when dried
This is a review of Eryone, white ASA filament.*** Edit *** 19/01/2024Although I said below that it seemed ok, when it had been dried, this later proved not to be case.I went back to one of the original prints that had previously suffered with layer separation, after the filament had been thoroughly dried and you can see the separation in the picture - not good at all.This was printed on a Prusa MK3S in a Lack enclosure, at temperatures 260/110 with an enclosure temperature of about 30 -35, my usual setup for ASA and works great with Prusament ASA.This filament is ok-ish for small, or thin prints but not good for chunkier stuff.Shame, I love Eryone PETG, but this isn't up to that quality.***** This below is my first impression, which changed as detailed aboveInitial Short story:Once I figured out it was wet, and dried it for 4 hours it turned out great.Initial Long story:Eryone has been my go-to for PETG for a long time.I'd only ever used Prusament ASA previously, which is great but, both expensive and slow to get hold of.So, as a fact finding mission, I tried some Eryone ASA white (always a tricky colour, apparently because of the dye) when it was on offer.It was sealed very well, and I had no thoughts of it being damp; my first print warped very badly on the bed, so I added some brims and some Magigoo - two prints then only slightly warped, but there was still some layer separation. Fixable with some acetone welding as they were just brackets, but not ideal at all.As a last chance saloon sort of thing I dried it out for 4 hours and tried again on another print, and the print was perfect - no warping and no layer separation - great!So, good news, it is great filament and I will buy it again but definitely dry it out before I use it.
5.0 out of 5 stars First ABS try!!
First time using Eryone ABS+ White, and also my first print with a new printer. I had to play with the settings quite a bit, but once dialed in, the filament performed great, smooth extrusion, strong layers, and a nice clean finish. For a first attempt, I’m really happy with how it turned out.
4.0 out of 5 stars Very very strong parts, but a handful to work with.
Lives up to its reputation for being difficult. First attempt at a small part (260C/70C/fan off) looked good at first, but delaminated easily. Jacking the bed temperature up to 80C, the part came loose and went 'spaghetti'. Third go, bed back to 70C but print speed down to 40mm/sec things look very good, excellent strength and 1mm holes cross ways through the shaft came out clear.I then got some specific nylon bed glue and went for the big gear I had in mind. Sadly the ends lifted and so wrecked the part, it is 235 mm long, so only fits on the bed diagonally, which is asking for trouble. I'll be trying to make this in two parts next.
5.0 out of 5 stars ABS easier than I thought!
As someone who's always stuck with PLA, I decided to give ABS+ a try, and I'm thrilled with the results. Here's why:- First-time ABS user, and found it incredibly easy to use and tune in.- Temperature: Optimal printing temperature achieved at 230°C.- Speed: Printed smoothly at a speed of 50mm/s.- No warping issues experienced on my Bambu Labs X1C printer.In conclusion, this filament prints beautifully with strong, high-quality results. I'm impressed by its performance and durability. Plus, the spool is well-wound, making printing a breeze. Highly recommended for those seeking reliable ABS+ filament for their projects!
5.0 out of 5 stars Great but off white colour.
This is great filament (white) I had no problem printing on Qidi X-Plus 3. It is not brilliant white but sort of off white, this didn't bother me but may be important to others.
Un filament de qualité pour des impressions 3D sans faille!
J’ai récemment essayé le filament ERYONE ABS Plus en 1.75mm pour ma imprimante 3D et je suis vraiment satisfait du résultat. Ce filament noir a une qualité exceptionnelle, avec une précision de +/- 0.03mm, ce qui garantit des impressions nettes et détaillées à chaque fois.Il se manipule facilement : il n’y a pas de bourrage, il fond bien à des températures standard et adhère parfaitement sur le plateau de mon imprimante. Les pièces imprimées sont solides et bien finis, avec une surface lisse et une excellente résistance aux chocs.De plus, le rouleau de 1kg est très pratique, il permet de réaliser de nombreuses impressions avant de devoir changer de filament. C’est définitivement un choix judicieux pour les amateurs de 3D comme moi, à la recherche de fiabilité et de qualité. Je le recommande vivement!
Sehr zufrieden – problemloses ABS+ Filament
ch bin mit dem ERYONE ABS+ Filament sehr zufrieden. Es ließ sich auf meinem Bambu P1S problemlos verarbeiten. Die Betthaftung war absolut unproblematisch – wobei ich für all meine Drucke ein bekanntes Haftungsspray nutze.Gedruckt habe ich mit den generischen ABS-Einstellungen, ohne dass ich etwas anpassen musste. Die Ergebnisse sind sauber, stabil und machen einen sehr zuverlässigen Eindruck. Besonders positiv fand ich auch, dass ich beim Drucken keinerlei störende Gerüche wahrgenommen habe.Ein geschlossener Bauraum ist meiner Meinung nach wichtig, aber wenn das gegeben ist, bekommt man ein sehr gutes, einfach zu handhabendes ABS+ Filament mit stabilen Druckresultaten. Klare Empfehlung!
Ottimo prodotto
Stampato per il momento solo pezzi di dimensioni ridotte ma il risultato è stato ottimo. Impostazioni Anycubic Kobra S1 per filamento ASA. Odore piuttosto forte, nonstante la stampante chiusa
PP takes a little getting used to.
Gosh this stuff is... Interesting let's say. Had troubles but I expected it. Bonds nice to Poly sheets I bought on Bolo. Kinda like a big sticky piece of tape. Near impossible to remove from tape so whatever your print side touching the build plate is, expect an odd glassy plastic tape look. But yes it prints fine. I had heated chamber about 65c. I forget other specs but I used the mod specs on the box. Nearly indestructible stuff. Limited use or needs but it fills a niche. I think I printed an 8 or 10 line outside brim. A few failures but by the end printing a a roughly 1.5x2 in part only one or attempts pulled up. Mostly because I used a partial pp sheet and part was near the edge and it pulled it right up. If I stayed at least 2" from edge, no issue and little pull up. Play with, expect failures but it absolutely can be printed
Se imprime muy bien
Se imprime muy facil, incluso mas que el ABS.Es la primera vez que pruebo este material, y de momento encantado con el resultado.Nozzle 255°C y cama a 110°C e impresora cerrada.Con un poco de adhesivo en la cama no he tenido ningun problema de warping.Lo he cogido por las especificaciones del material, ya que quiero hacer unas piezas para el coche, y el PLA se deforma y el ABS se vuelve quebradizo.El bobinado es muy bueno y el vacio correcto.Recomendado
Similar suggestions by Bolo
More from this brand
Similar items from “Filament 3D Printing Materials”
Share with
Or share with link
https://www.bolo.ae/products/KO0P5U85JWE