
Description:
Heatable PEI Built Platform for Tina2 S and TINA2 Plus 3D Printers
Reviews:
5.0 out of 5 stars A good just in case addition!
The Tina2 is a great little 3d printer, perfect for an absolute beginner. Got this extra plate just in case I wear the other one out as I’m using it so much.
5.0 out of 5 stars original printer plate
original printer plate
5.0 out of 5 stars Works perfectly
Genuine build plate and have had perfect prints with no adhesion issues
1.0 out of 5 stars Easily marked everytime you print something
Very poor quality, nothing like the original, every print leaves a bad mark on the plate.
Perfect Spare Bed or Factory replacement for the Tina2S (Green)
Perfect fit for my Tina2S and it is compatible with the Green Tina2S which uses an auto-leveling system. There are other plates out there, but they cannot be detected by the Green Tina2S. The spring steel makes removing the prints really easy. It doesn't have to bend far to remove a print. NOTE: If your print is fairly thin (less than 3mm for example) you MAY need to use a plastic bed scraper to remove it. I recommend printing a few of those before making any other prints.I rotate through my plates to keep the printer in motion. One plate will be in the printer while the other is having its print removed. Then when the print is done, swap them around.For those who have prints sticking too hard, add a thin coat of glue stick or hairspray to act as a releasing agent for when prints are completed. When the buildup becomes too thick or causes failures, rinse the film with water and rub it away with your hand (I don't use soap). Let it dry and it's ready to be used again.
Visit the WEEFUN Store
Heatable PEI Built Platform for Tina2 S and TINA2 Plus 3D Printers
AED9011
Quantity:
Order today to get by 7-14 business days
Delivery fee of AED 20. Free for orders above AED 200.
Imported From: United Kingdom
At BOLO, we work hard to ensure the products you receive are new, genuine, and sourced from reputable suppliers.
BOLO is not an authorized or official retailer for most brands, nor are we affiliated with manufacturers unless specifically stated on a product page. Instead, we source verified sellers, authorized distributors or directly from the manufacturer.
Each product undergoes thorough inspection and verification at our consolidation and fulfilment centers to ensure it meets our strict authenticity and quality standards before being shipped and delivered to you.
If you ever have concerns regarding the authenticity of a product purchased from us, please contact Bolo Support. We will review your inquiry promptly and, if necessary, provide documentation verifying authenticity or offer a suitable resolution.
Your trust is our top priority, and we are committed to maintaining transparency and integrity in every transaction.
All product information, images, descriptions, and reviews originate from the manufacturer or from trusted sellers overseas. BOLO is not affiliated with, endorsed by, or an authorized retailer for most brands listed on our website unless stated otherwise.
While we strive to display accurate information, variations in packaging, labeling, instructions, or formulation may occasionally occur due to regional differences or supplier updates. For detailed or manufacturer-specific information, please contact the brand directly or reach out to BOLO Support for assistance.
Unless otherwise stated, all prices displayed on the product page include applicable taxes and import duties.
BOLO operates in accordance with the laws and regulations of United Arab Emirates. Any items found to be restricted or prohibited for sale within the UAE will be cancelled prior to shipment. We take proactive measures to ensure that only products permitted for sale in United Arab Emirates are listed on our website.
All items are shipped by air, and any products classified as “Dangerous Goods (DG)” under IATA regulations will be removed from the order and cancelled.
All orders are processed manually, and we make every effort to process them promptly once confirmed. Products cancelled due to the above reasons will be permanently removed from listings across the website.
Similar suggestions by Bolo
More from this brand
Similar items from “3D Printer Accessories”
Share with
Or share with link
https://www.bolo.ae/products/KO0OXY5M6X6
Visit the WEEFUN Store
Heatable PEI Built Platform for Tina2 S and TINA2 Plus 3D Printers

AED9011
Quantity:
Order today to get by 7-14 business days
Delivery fee of AED 20. Free for orders above AED 200.
Imported From: United Kingdom
At BOLO, we work hard to ensure the products you receive are new, genuine, and sourced from reputable suppliers.
BOLO is not an authorized or official retailer for most brands, nor are we affiliated with manufacturers unless specifically stated on a product page. Instead, we source verified sellers, authorized distributors or directly from the manufacturer.
Each product undergoes thorough inspection and verification at our consolidation and fulfilment centers to ensure it meets our strict authenticity and quality standards before being shipped and delivered to you.
If you ever have concerns regarding the authenticity of a product purchased from us, please contact Bolo Support. We will review your inquiry promptly and, if necessary, provide documentation verifying authenticity or offer a suitable resolution.
Your trust is our top priority, and we are committed to maintaining transparency and integrity in every transaction.
All product information, images, descriptions, and reviews originate from the manufacturer or from trusted sellers overseas. BOLO is not affiliated with, endorsed by, or an authorized retailer for most brands listed on our website unless stated otherwise.
While we strive to display accurate information, variations in packaging, labeling, instructions, or formulation may occasionally occur due to regional differences or supplier updates. For detailed or manufacturer-specific information, please contact the brand directly or reach out to BOLO Support for assistance.
Unless otherwise stated, all prices displayed on the product page include applicable taxes and import duties.
BOLO operates in accordance with the laws and regulations of United Arab Emirates. Any items found to be restricted or prohibited for sale within the UAE will be cancelled prior to shipment. We take proactive measures to ensure that only products permitted for sale in United Arab Emirates are listed on our website.
All items are shipped by air, and any products classified as “Dangerous Goods (DG)” under IATA regulations will be removed from the order and cancelled.
All orders are processed manually, and we make every effort to process them promptly once confirmed. Products cancelled due to the above reasons will be permanently removed from listings across the website.
Description:
Heatable PEI Built Platform for Tina2 S and TINA2 Plus 3D Printers
Reviews:
5.0 out of 5 stars A good just in case addition!
The Tina2 is a great little 3d printer, perfect for an absolute beginner. Got this extra plate just in case I wear the other one out as I’m using it so much.
5.0 out of 5 stars original printer plate
original printer plate
5.0 out of 5 stars Works perfectly
Genuine build plate and have had perfect prints with no adhesion issues
1.0 out of 5 stars Easily marked everytime you print something
Very poor quality, nothing like the original, every print leaves a bad mark on the plate.
Perfect Spare Bed or Factory replacement for the Tina2S (Green)
Perfect fit for my Tina2S and it is compatible with the Green Tina2S which uses an auto-leveling system. There are other plates out there, but they cannot be detected by the Green Tina2S. The spring steel makes removing the prints really easy. It doesn't have to bend far to remove a print. NOTE: If your print is fairly thin (less than 3mm for example) you MAY need to use a plastic bed scraper to remove it. I recommend printing a few of those before making any other prints.I rotate through my plates to keep the printer in motion. One plate will be in the printer while the other is having its print removed. Then when the print is done, swap them around.For those who have prints sticking too hard, add a thin coat of glue stick or hairspray to act as a releasing agent for when prints are completed. When the buildup becomes too thick or causes failures, rinse the film with water and rub it away with your hand (I don't use soap). Let it dry and it's ready to be used again.
Similar suggestions by Bolo
More from this brand
Similar items from “3D Printer Accessories”
Share with
Or share with link
https://www.bolo.ae/products/KO0OXY5M6X6