5.0 out of 5 stars Great Value & Very User Friendly 🤗

M.J.G. · 9 April 2025

(function() { P.when('cr-A', 'ready').execute(function(A) { if(typeof A.toggleExpanderAriaLabel === 'function') { A.toggleExpanderAriaLabel('review_text_read_more', 'Read more of this review', 'Read less of this review'); } }); })(); .review-text-read-more-expander:focus-visible { outline: 2px solid #2162a1; outline-offset: 2px; border-radius: 5px; } Awesome value for the money! Simple to set up (the wi-fi was a little tricky but got there in the end!) and I was surprised how small but robust the printer is! Not much bigger footprint than a 4 slice toaster and about twice the height. It feels really well put together which is s good sign.Unpacked and was up and printing in about 15 minutes. I printed the fish bone model from the TF card included and it came out superbly! Hardly any visible layer lines and it this is indicative of the quality we can expect then I really am delighted with the purchase.Connected to the Poloprint app and immediately uploaded a diamond cut vase to really test this machine out - unfortunately it takes 8 hours to print but 3 hours in it looks really good so far🙏This was my first jump into 3D printing and this printer pretty much holds your hand all the way through the set up and printing process. It’s reasonably quiet too which is a bonus.

5.0 out of 5 stars Great starter printer

K.S. · 6 April 2025

Started using within 10 minutes of its arrival. Very little to set up. Childs play even for someone with no experience of 3d printing. This is the basic so no wifi but not needed. There could be a lot more examples to print rather than the half dozen supplied on the tf card. It's not the quietest by a long margin and the print speed is very slow but I found lots of models on Thingiverse and have been printing like a mad man, Cannot handle very fine detail but for the price - a great starter.

4.0 out of 5 stars Simple little beginners 3D printer.

M.D. · 27 June 2023

Bought this two days ago and I’m so glad I did. I’ve always wanted to try 3D printing, but always thought it was too expensive and too complicated for me to even bother. But after reading how easy this one is to use, and at such a reasonable cost, I thought I’d give it a whirl.After taking it out the box all that was required was placing the reel of PLA filament on the side and attaching a tube then feeding the filament in. It is supplied microSD card with all the software on that you just put in the slot and chose one of the sample prints from a list of about 10 different designs. It’s automatically levels itself and the little screen on top tells you all the heating information. Just start the print and off it goes. Simplicity itself.After trying out a couple of the tester prints I thought I’d try printing a free STL file that I have from the internet. The software you need to use to import this is all on the microSD card and just needs installing on your PC or Mac and again seems easy enough to use. I can see the slicing software is an art by itself, but I think with a few more prints I’ll become more familiar with the apps and deducing where the optimal places going for the supporting structure. I still managed to print it reasonably well with my basic knowledge.Very happy so far as I haven’t had any misprints yet. Early days, but I’m pleasantly surprised. The quality of the print isn’t bad. Yes, you can see the gradient lines but not as much as I thought you would at this price point. Probably best to go for a bigger model or resin printer if you want finely detailed figures or larger pieces, but this is a great little printer for scenery, bases or school projects, and I t’s fairly quick too. The build plate is small at about 10cm square, but perfect for small projects or multi part builds.It looks neat and is compact and smart.Perfect for beginners and children with an interest in technology. Can’t recommend this little printer highly enough. No muss, no fuss.…so after playing around with it for a week or two the heat block has worked it’s way loose and has started dropping the print nozzle lower midway through each print. This has lead to it dragging the nozzle back over what it has already printed ruining every print I’ve attempted for the last 5-6 prints. I’ve returned to back to Bolo for a refund. I will purchase another one as it was great while it lasted and hopefully and I’m hopeful that my next one will not have this problem.

5.0 out of 5 stars Excellent for an out of the box experience

G.W. · 18 April 2023

I've been using this for a month and would recommend this for somebody looking for an out of the box, no fuss experience with 3D printing. I'd also recommend the extra cost of the Tina2S over the standard Tina2.I pulled this out of the box, turned it on, and was away printing something. The default settings in the slicer (I used Cura, and haven't tried their own slicer) worked very nicely for normal PLA and PLA+. There are some refinements you can make as you become more familiar, but there was nothing desperately needed to get some great models and print in place toys going as a first experience. I did have to go into settings to turn on the heated bed, but that was it. Auto bed levelling takes away a lot of the stress, and the compromise here is a smaller build volume, and slower print speed compared to similar priced Enders.A complaint I have is that the spool holder only holds 250g spools, and value is found in 1kg spools. The first or second print should either be a spool holder replacement, or an extender.So far I've used PLA and PLA+, and gloss, silk, and sparkle variants and it's taken everything I've thrown at it. The only major issue encountered has been with the odd heating error for the bed or nozzle after I've moved the printer. It seems moving it about can cause the cables to come free enough to cause errors, but a quick jiggle and the issue is sorted.For the price I couldn't recommend this more for anyone looking to get into 3D printing with a no fuss printer.

Soddisfatto e ottimo supporto

i.s. · 9 November 2023

(function() { P.when('cr-A', 'ready').execute(function(A) { if(typeof A.toggleExpanderAriaLabel === 'function') { A.toggleExpanderAriaLabel('review_text_read_more', 'Read more of this review', 'Read less of this review'); } }); })(); .review-text-read-more-expander:focus-visible { outline: 2px solid #2162a1; outline-offset: 2px; border-radius: 5px; } Ho acquistato questa stampante quasi un anno fa, mi trovo a scrivere una recensione ora per confermare che il prodotto è validissimo, per chi come me sta iniziando in questo mondo.Dutante questo periodo ho contattato due volte il supporto, una volta per un problema post aggiornamento del firmware e mi hanno aiutato nella risoluzione, la seconda volta li ho contattati per un guasto e dopo pochissimi giorni mi hanno inviato una nuova macchina.Top!

MI PIACEEEEE

S.D. · 13 April 2023

Premetto che è il mio primo approccio ad una stampante 3d per cui parlo da profana che la ha comprata per fare hobbistica. Il software è intuitivo ed abbastanza facile da imparare ad usare (se avete già nozioni base cad sarà una passeggiata). ho già realizzato diversi oggetti e vengono molto carini, si vede un pochino il passaggio degli strati ma presuppongo sia normale per una stampante 3d di questa fascia di prezzo.

印刷が簡単にできサポートが充実

A. · 9 April 2025

Tina2Sが届いてから直ちにテスト印刷をやってみると綺麗に造形できました。しかも、印刷手順は大変簡単です。2つ目のテスト印刷中に電源がOFFになっていました。電源アダプターの中間スィッチを手で揺らすと電源がONになったりOFFになったりして、この不具合が原因かと推察し、サポートにメイルで連絡しました。すると、直ちに、新しい電源アダプターの送付手続きを取ってくれました。ただし、中国からの発送なのか届くのは約１週間後でした。また、説明書にはノズルが３個付属していることになっていたが、実際は２個でした。このこともサポートに伝えると、不足分を送付するということですが、まだ手元には届いていません。WiibuilderやCuraでスライスするときのプリンターの設定はWEEFUNのTINA2Sとするようです。ENTINAのTINA2Sとの違いは分かりません。以上、印刷操作が簡単なこととサポートが充実しているので初心者にはお勧めの機種だと判断します。

Per i bambini è spettacolare

t. · 17 July 2023

Necessità comunque di una preparazione minima di informatica.Non ha il display touch! Si comanda con un pomello a fianco del display

コスパ良いです

A.カ. · 17 April 2025

面白いです！時間はかかりますが、かなりクオリティの良い物が出来ました。色々作るのが楽しみです。