Description:
Reviews:
5.0 out of 5 stars A good upgrade to consider if you are looking at direct drive.
I have bought this to upgrade an Ender 3 Max. I know the lead screw supplied with this is too short but until the tight wads at Creality bring out a kit for it you have to buy one and buy longer lead screws to fit. Come on Creality, you sell your printers as upgradable then don't sell the proper parts - get your act together!This upgrade gives you a 2nd driver for you Z axis which means that both sides of the x axis bar stay level when going up and down. This is not such a problem on stock smaller bed printers but if you install a direct drive or have a larger print bed it can become a problem that really affects print quality. Once the head gets further away from the left hand side where the Z axis mechanism is the X axis bar can droop and play about with the printed layers.Its a little bit of a faff to install and I would strongly recommend you print a couple of Z axis calibration struts so to can be sure that the x axis is level with the frame. Once all fitted and set up the difference is pretty obvious in print quality.I already had one on an Ender 3 pro that has a direct drive and it made a massive difference. Once I had the Ender 3 Max I immediate saw the X axis dip on the right as it moved upwards and knew I had to fit dual Zs to get any sort of decent print quality. Once I fitted it the prints were much better so it was worth the outlay.
5.0 out of 5 stars A really cool upgrade
I purchased this kit to add to my Ender 3 V2 and I have to say it's been a worthy investment.I often found with the Ender 3 and Ender 3 V2 that the far right hand side of the gantry would sometimes droop/sag slightly compared to the left side, no matter how many times you tighten it or adjust it the right side would always seem to end up progressively lower over time.This kit has corrected that issue and now every print has perfect layers with no imperfections. The dual Z screws ensure that the extruder is level at all times and prevents sag on the right side of the extruder arm.The kit is very easy to install and comes complete with everything you need. After mounting the new stepper motor on the right side of the printer it was just a case of attaching the z screw and collar, attaching the z screw alignment plates at the top of the z screws on both sides of the printer and then running the new cable from the stepper motors to the control board in the base. The cable provided is a split lead allowing you to plug both steppers (existing on the left and new on the right) in to the one socket that the left hand stepper motor was plugged in to.After running many prints with this kit installed I can honestly say that print quality has improved and layer consistency is now very accurate. I would highly recommend this upgrade to anyone who suffers with banding or a slant to their prints.A very nice kit that is very easy to install.
5.0 out of 5 stars Ender 3 Pro upgrade !
If you find your Ender 3 Pro X-axis droops, then fitting a second Z-axis lead screw will help dramatically.I will assume your are confident enough to work on your Ender and access the PLC control PCB.The actual kit is includes all necessary parts and is straight forward to instal.You will need some type of gauge block so that the x-axis is at the same height on the left and right hand side. A 3-2-1 gauge is ideal. You will almost certainly need release the mounting acreage on the existing left hand z-axis screw in order to set the height on the new z-axis.Using the gauge blocks on each side and with the x-axis in contact m. Just retighten the mounting screws.Once done the x-axis will move up and down and be level.Once installed and setup. The results are very impressive. Noticeable on bigger 3D models in the fact that there is no droop and things just look correct.If I would anything it would be to gear the left and right z-axis screws with a tooth drive belt running between them.As is you me in the hands of the stepper motors.
4.0 out of 5 stars A leap forward in print quality
A great upgrade for my Ender 3 V2 and an absolute must-have if you want to use a direct drive extruder without suffering from the dreaded x-axis droop. I’ve only knocked off a star because the instructions are pretty useless. Fortunately it’s not hard to get everything screwed into place but it’s vital to get both sides properly synced and levelled, something which really should be in the installation instructions.
5.0 out of 5 stars Makes prints so much better
I'd say this was easy and quick to install but firstly it was not overall cause I wanted this to be perfect, In total including leveling the bed and testing and tweaking I personally spent about 2 hours getting this absolutely perfect, I did not rush and did watch a video to assist to install.It has been so worth it putting this on my ender 3 v2 it has made print quality so much better overall and since pairing with an auto level and modifying the bed plate knobs to adjust the height Ive not needed to level my bed since.I can now also use my custom slicer settings which means printing miles faster and still getting quality results Id highly recommend this for an upgrade well worth the money.
5.0 out of 5 stars Must have Ender 3 Upgrade
This is by far the most effective upgrade I have done on my Ender 3. For ages I was convinced that the many BL Touch I had put on my printer were not working. I had tried everything to get a print like you see in the 'adverts'. New motherboards as well were thrown in to the mix, numerous Cura profiles promising Nirvana, a multitude of PLA combos with different settings, glue sticks, blue tape, etc. In the end it was this kit that did the trick. Buy it, set it up and you won't look back.
5.0 out of 5 stars Really useful upgrade
I wanted to make my Z axis a bit more stable on my Ender 3v2 and this is just the ticket. There are cheaper ones out there but the OEM kit is much better. I found a really helpful video on YouTube showing how to install and square everything up and it has been great ever since.The only downside, and it is the same with all Creality upgrades for this machine, is that you have to access the control board to plug in the new cable.
Prima product
Makkelijk te installeren. Zorg wel dat je als je alles weer in elkaar zet de x-as waterpas vast zet, dit voorkomt problemen met het bed.
Indispensabile per ender 3 neo
indispensabile per una stampa precisa e perfetta! senza il 2 motore non e' possibile avere un ottima precisione nella stampa e a lungo andare si sforza troppo il primo motore/supporto verticale, inoltre si rischia di dover risettare spesso la stampante. ormai sono piu' di 2 anni che l'ho montata.
Bra
Bra grejer
Upgate für Ender 3Pro
Die Teile sind alle passgenau und gut verarbeitet. Der Ein- bzw. Umbau ging gut von der Hand.
Incroyable
Ce produit rajoute de la rigidité à l'axe Z, et la qualité d'impression est vraiment meilleure depuis que je l'ai installé.L'installation était très simple, avec une notice de montage très compréhensible.Le câble de commande est raccordé sur le moteur d'à côté, il n'y a même pas besoin de faire trop de câblage. Je recommande.
Visit the Creality Store
Creality Official Ender 3 Dual Z-Axis Upgrade Kit (42-34 Stepper Motor Included) for Ender3, Ender-3S, Ender-3 Pro, Ender 3V2, Ender 3 Neo, Ender 3 V2 Neo 3D Printer
AED33122
Quantity:
Order today to get by 7-14 business days
This item qualifies for free delivery
'%3e%3crect%20x='0.599609'%20width='22.4'%20height='16'%20fill='%230A17A7'/%3e%3cpath%20fill-rule='evenodd'%20clip-rule='evenodd'%20d='M-0.426196%20-1.53223L9.1335%204.91587V-1.06506H14.4668V4.91648L24.0263%20-1.53147L25.2193%200.237148L17.6615%205.33494H23.0002V10.6683H17.6618L25.2187%2015.7655L24.0258%2017.5341L14.4668%2011.0865V17.0683H9.1335V11.0871L-0.425634%2017.5348L-1.61858%2015.7662L5.93947%2010.6683H0.600172V5.33494H5.93977L-1.61914%200.236387L-0.426196%20-1.53223Z'%20fill='white'/%3e%3cpath%20d='M15.5332%205.06615L25.6655%20-1.59961'%20stroke='%23DB1F35'%20stroke-width='0.533333'%20stroke-linecap='round'/%3e%3cpath%20d='M16.6094%2010.9578L25.6924%2017.0801'%20stroke='%23DB1F35'%20stroke-width='0.533333'%20stroke-linecap='round'/%3e%3cpath%20d='M7.00176%205.04727L-2.47266%20-1.33789'%20stroke='%23DB1F35'%20stroke-width='0.533333'%20stroke-linecap='round'/%3e%3cpath%20d='M8.02936%2010.8842L-2.47266%2017.8486'%20stroke='%23DB1F35'%20stroke-width='0.533333'%20stroke-linecap='round'/%3e%3cpath%20fill-rule='evenodd'%20clip-rule='evenodd'%20d='M0.599609%209.6H10.1996V16H13.3996V9.6H22.9996V6.4H13.3996V0H10.1996V6.4H0.599609V9.6Z'%20fill='%23E6273E'/%3e%3c/g%3e%3c/svg%3e)
Imported From: United Kingdom
At BOLO, we work hard to ensure the products you receive are new, genuine, and sourced from reputable suppliers.
BOLO is not an authorized or official retailer for most brands, nor are we affiliated with manufacturers unless specifically stated on a product page. Instead, we source verified sellers, authorized distributors or directly from the manufacturer.
Each product undergoes thorough inspection and verification at our consolidation and fulfilment centers to ensure it meets our strict authenticity and quality standards before being shipped and delivered to you.
If you ever have concerns regarding the authenticity of a product purchased from us, please contact Bolo Support. We will review your inquiry promptly and, if necessary, provide documentation verifying authenticity or offer a suitable resolution.
Your trust is our top priority, and we are committed to maintaining transparency and integrity in every transaction.
All product information, images, descriptions, and reviews originate from the manufacturer or from trusted sellers overseas. BOLO is not affiliated with, endorsed by, or an authorized retailer for most brands listed on our website unless stated otherwise.
While we strive to display accurate information, variations in packaging, labeling, instructions, or formulation may occasionally occur due to regional differences or supplier updates. For detailed or manufacturer-specific information, please contact the brand directly or reach out to BOLO Support for assistance.
Unless otherwise stated, all prices displayed on the product page include applicable taxes and import duties.
BOLO operates in accordance with the laws and regulations of United Arab Emirates. Any items found to be restricted or prohibited for sale within the UAE will be cancelled prior to shipment. We take proactive measures to ensure that only products permitted for sale in United Arab Emirates are listed on our website.
All items are shipped by air, and any products classified as “Dangerous Goods (DG)” under IATA regulations will be removed from the order and cancelled.
All orders are processed manually, and we make every effort to process them promptly once confirmed. Products cancelled due to the above reasons will be permanently removed from listings across the website.
Similar suggestions by Bolo
More from this brand
Similar items from “3D Printer Accessories”
Share with
Or share with link
https://www.bolo.ae/products/KO09EK4F2ZS
Visit the Creality Store
Creality Official Ender 3 Dual Z-Axis Upgrade Kit (42-34 Stepper Motor Included) for Ender3, Ender-3S, Ender-3 Pro, Ender 3V2, Ender 3 Neo, Ender 3 V2 Neo 3D Printer
AED33122
Quantity:
Order today to get by 7-14 business days
This item qualifies for free delivery
Imported From: United Kingdom
At BOLO, we work hard to ensure the products you receive are new, genuine, and sourced from reputable suppliers.
BOLO is not an authorized or official retailer for most brands, nor are we affiliated with manufacturers unless specifically stated on a product page. Instead, we source verified sellers, authorized distributors or directly from the manufacturer.
Each product undergoes thorough inspection and verification at our consolidation and fulfilment centers to ensure it meets our strict authenticity and quality standards before being shipped and delivered to you.
If you ever have concerns regarding the authenticity of a product purchased from us, please contact Bolo Support. We will review your inquiry promptly and, if necessary, provide documentation verifying authenticity or offer a suitable resolution.
Your trust is our top priority, and we are committed to maintaining transparency and integrity in every transaction.
All product information, images, descriptions, and reviews originate from the manufacturer or from trusted sellers overseas. BOLO is not affiliated with, endorsed by, or an authorized retailer for most brands listed on our website unless stated otherwise.
While we strive to display accurate information, variations in packaging, labeling, instructions, or formulation may occasionally occur due to regional differences or supplier updates. For detailed or manufacturer-specific information, please contact the brand directly or reach out to BOLO Support for assistance.
Unless otherwise stated, all prices displayed on the product page include applicable taxes and import duties.
BOLO operates in accordance with the laws and regulations of United Arab Emirates. Any items found to be restricted or prohibited for sale within the UAE will be cancelled prior to shipment. We take proactive measures to ensure that only products permitted for sale in United Arab Emirates are listed on our website.
All items are shipped by air, and any products classified as “Dangerous Goods (DG)” under IATA regulations will be removed from the order and cancelled.
All orders are processed manually, and we make every effort to process them promptly once confirmed. Products cancelled due to the above reasons will be permanently removed from listings across the website.
Description:
Reviews:
5.0 out of 5 stars A good upgrade to consider if you are looking at direct drive.
I have bought this to upgrade an Ender 3 Max. I know the lead screw supplied with this is too short but until the tight wads at Creality bring out a kit for it you have to buy one and buy longer lead screws to fit. Come on Creality, you sell your printers as upgradable then don't sell the proper parts - get your act together!This upgrade gives you a 2nd driver for you Z axis which means that both sides of the x axis bar stay level when going up and down. This is not such a problem on stock smaller bed printers but if you install a direct drive or have a larger print bed it can become a problem that really affects print quality. Once the head gets further away from the left hand side where the Z axis mechanism is the X axis bar can droop and play about with the printed layers.Its a little bit of a faff to install and I would strongly recommend you print a couple of Z axis calibration struts so to can be sure that the x axis is level with the frame. Once all fitted and set up the difference is pretty obvious in print quality.I already had one on an Ender 3 pro that has a direct drive and it made a massive difference. Once I had the Ender 3 Max I immediate saw the X axis dip on the right as it moved upwards and knew I had to fit dual Zs to get any sort of decent print quality. Once I fitted it the prints were much better so it was worth the outlay.
5.0 out of 5 stars A really cool upgrade
I purchased this kit to add to my Ender 3 V2 and I have to say it's been a worthy investment.I often found with the Ender 3 and Ender 3 V2 that the far right hand side of the gantry would sometimes droop/sag slightly compared to the left side, no matter how many times you tighten it or adjust it the right side would always seem to end up progressively lower over time.This kit has corrected that issue and now every print has perfect layers with no imperfections. The dual Z screws ensure that the extruder is level at all times and prevents sag on the right side of the extruder arm.The kit is very easy to install and comes complete with everything you need. After mounting the new stepper motor on the right side of the printer it was just a case of attaching the z screw and collar, attaching the z screw alignment plates at the top of the z screws on both sides of the printer and then running the new cable from the stepper motors to the control board in the base. The cable provided is a split lead allowing you to plug both steppers (existing on the left and new on the right) in to the one socket that the left hand stepper motor was plugged in to.After running many prints with this kit installed I can honestly say that print quality has improved and layer consistency is now very accurate. I would highly recommend this upgrade to anyone who suffers with banding or a slant to their prints.A very nice kit that is very easy to install.
5.0 out of 5 stars Ender 3 Pro upgrade !
If you find your Ender 3 Pro X-axis droops, then fitting a second Z-axis lead screw will help dramatically.I will assume your are confident enough to work on your Ender and access the PLC control PCB.The actual kit is includes all necessary parts and is straight forward to instal.You will need some type of gauge block so that the x-axis is at the same height on the left and right hand side. A 3-2-1 gauge is ideal. You will almost certainly need release the mounting acreage on the existing left hand z-axis screw in order to set the height on the new z-axis.Using the gauge blocks on each side and with the x-axis in contact m. Just retighten the mounting screws.Once done the x-axis will move up and down and be level.Once installed and setup. The results are very impressive. Noticeable on bigger 3D models in the fact that there is no droop and things just look correct.If I would anything it would be to gear the left and right z-axis screws with a tooth drive belt running between them.As is you me in the hands of the stepper motors.
4.0 out of 5 stars A leap forward in print quality
A great upgrade for my Ender 3 V2 and an absolute must-have if you want to use a direct drive extruder without suffering from the dreaded x-axis droop. I’ve only knocked off a star because the instructions are pretty useless. Fortunately it’s not hard to get everything screwed into place but it’s vital to get both sides properly synced and levelled, something which really should be in the installation instructions.
5.0 out of 5 stars Makes prints so much better
I'd say this was easy and quick to install but firstly it was not overall cause I wanted this to be perfect, In total including leveling the bed and testing and tweaking I personally spent about 2 hours getting this absolutely perfect, I did not rush and did watch a video to assist to install.It has been so worth it putting this on my ender 3 v2 it has made print quality so much better overall and since pairing with an auto level and modifying the bed plate knobs to adjust the height Ive not needed to level my bed since.I can now also use my custom slicer settings which means printing miles faster and still getting quality results Id highly recommend this for an upgrade well worth the money.
5.0 out of 5 stars Must have Ender 3 Upgrade
This is by far the most effective upgrade I have done on my Ender 3. For ages I was convinced that the many BL Touch I had put on my printer were not working. I had tried everything to get a print like you see in the 'adverts'. New motherboards as well were thrown in to the mix, numerous Cura profiles promising Nirvana, a multitude of PLA combos with different settings, glue sticks, blue tape, etc. In the end it was this kit that did the trick. Buy it, set it up and you won't look back.
5.0 out of 5 stars Really useful upgrade
I wanted to make my Z axis a bit more stable on my Ender 3v2 and this is just the ticket. There are cheaper ones out there but the OEM kit is much better. I found a really helpful video on YouTube showing how to install and square everything up and it has been great ever since.The only downside, and it is the same with all Creality upgrades for this machine, is that you have to access the control board to plug in the new cable.
Prima product
Makkelijk te installeren. Zorg wel dat je als je alles weer in elkaar zet de x-as waterpas vast zet, dit voorkomt problemen met het bed.
Indispensabile per ender 3 neo
indispensabile per una stampa precisa e perfetta! senza il 2 motore non e' possibile avere un ottima precisione nella stampa e a lungo andare si sforza troppo il primo motore/supporto verticale, inoltre si rischia di dover risettare spesso la stampante. ormai sono piu' di 2 anni che l'ho montata.
Bra
Bra grejer
Upgate für Ender 3Pro
Die Teile sind alle passgenau und gut verarbeitet. Der Ein- bzw. Umbau ging gut von der Hand.
Incroyable
Ce produit rajoute de la rigidité à l'axe Z, et la qualité d'impression est vraiment meilleure depuis que je l'ai installé.L'installation était très simple, avec une notice de montage très compréhensible.Le câble de commande est raccordé sur le moteur d'à côté, il n'y a même pas besoin de faire trop de câblage. Je recommande.
Similar suggestions by Bolo
More from this brand
Similar items from “3D Printer Accessories”
Share with
Or share with link
https://www.bolo.ae/products/KO09EK4F2ZS