5.0 out of 5 stars Great Overture Quality

P. · 29 September 2024

As with all the other Overture filament types I've used, this TPU is up there in quality, ease of use and the final finish.Moisture level was low out of the packet, which is really important for TPU. Although it didn't need drying due to it being dried before being packaged in a vacuum sealed bag, with TPU being so absorbant, I threw it in the drier before use anyway.Used on a Prusa MK4, using flex profile, this printed amazingly cleanly straight out of the box. No additional retraction settings needed. The quality of the prints is right up there with all thr other Overture filaments I've used and is now my go to brand, buying from UK.Make sure you use a textured sheet as adhesion is really high. The colour is true black and a nice balance between glossy and matt finish, but this will change based in your print speed, temperature etc, so your mileage may vary.Overall, very well priced for TPU and up there in quality and functionality compared to other Overture filaments I've used. Very happy with this brand and this TPU

5.0 out of 5 stars Nice colour, but the yellow is not a bright yellow

s. · 3 August 2025

easy to print if you got the right setting, no need to use any glue as release agent for textured pei plateBenchy showing yellow and purpleunder daylight, the orange yellow looks more like yellow

5.0 out of 5 stars Good product

R. · 20 May 2025

Good stuff!Ordered in black.On 0.4 nozzle and 0.2 layer no issues, adheres to base plate well, not had any issues with clogging or stringing.Package was sealed well as far as I can tell as it was still in vacuum.Still dried it for 12 h before printing.

4.0 out of 5 stars Decent TPU. Worth a punt

D. · 15 August 2023

This TPU isn't in the same category as the generic Sainsmart / Eryone type filaments.I had to make a few tweaks to my standard profile to get to a point I'm happy with it. It needs to be about 10 degrees hotter at the nozzle and it needs cooling at about 40-50% or it curls up. I also had to slow down supports not because of clogging but just because they were too weak if I didn't.As it's a matt finish it's less forgiving than the translucent type. Imperfections stick out so you really need to tune things for a nice surface.The feel does seem more squishy than the 95 hardness rating implies. It stretches and deforms more than my standard TPU's but isn't quite as elastic as the old flex filaments.The colours look nice and I may buy more in future as I do like multi colour printing.All in all, slightly expensive, slightly harder to print but nice looking with a nice feel.

5.0 out of 5 stars great filament

m.c.e. · 26 May 2025

I Have a Bambu 3D printer and this filament is excellent I have not had a failed print as yet and always a perfect finish you just have to wait for the price to drop

5.0 out of 5 stars Brilliant TPU

B.M. · 10 December 2022

My first use of TPU and worried it might be tricky. Needn't have, it's working like a dream. 30mm/s and 220* head, 60* bed on a much used Anycubic i3 Mega with standard boden feed. Bed adhesion v good. It's not at all stretchy but at 1mm wall thickness super flexible, 3mm nicely flexy and at 5mm bendy, and it's as tough as old boots. Just started an 8 hour print 6" high with 1.5mm wall. If it does that it'll do anything. Result was OK but where walls overhang the build pate and get rising heat from it it deforms and doesn't print well. Tried sample at 40* bed and 210* head and perfect, bed adhesion fine.So very pleased with results so far, just remember it's the ambient temp at the extrusion layer that's important.

3.0 out of 5 stars Prints well, but much stiffer than 95A

G.F. · 27 May 2025

Dried it first overnight, and print quality was excellent, however prints made with this stuff are much harder than other 95A filaments I've been using.Thought this might be a reasonable alternative to Bambu Lab 95A HF (which already feels a little stiffer than other 95A TPU filaments I have tried) and while the Overture high speed TPU will print quite happily just about as quickly as the more expensive Bambu Lab filament it is *much* stiffer, to the point where it's not usable for the project I bought it for.To illustrate, I printed an airless tennis ball, since I already had one printed with the Bambu 95A HF filament, and squashed the two together, you can really see how the Bambu filament (in grey) gets completely crushed by the much harder green Overture filament.I'd say this sits just below the Bambu TPU for AMS in terms of stiffness (there are stories on Reddit of people successfully using it in an AMS), so if you have a project where some stiffer TPU would work then it's decent for the price, but despite a hardness rating of supposedly 95A it feels an awful lot stiffer than the other brands of 95A I have compared it against (Bambu and Sainsmart). If you need something with comparable stiffness to other 95A TPU then look elsewhere.

5.0 out of 5 stars Excellent filament

K.D. · 8 February 2025

Nice prints, super flexible, recommended.

Good quality

M.a. · 21 April 2024

Used it on ender 3s1 pro at speed 25mm. No issues

Great TPU

I.L. · 13 June 2024

A bit stringy even when dry however hasn't been a problem for my designs and are usually just to cut away.Made some bushings for my recurve bow stabilizer that works great and still over 6 months later look as good now as when I pulled them off the bed.

più morbido ed elastico di quanto dichiarato, però non puzza e non fa bolle,

P. · 22 June 2023

Decisamente non un 95a, ma allo stesso tempo trovare un filamento così morbido ed elastico che non puzza e non fa bolle e che costa meno del PLA è fantastico, come prova ci ho stampato le eartips per le Sony linkbuds su flsun fr senza direct drive non sono perfette, ma utilizzabili (10mm/s no retrazione) sulla v400 tiene fino a 40/ 50 mm/s

FREE BUILD SHEET

K.F. · 2 October 2020

This stuff is standard high quality tpu, but the reason I'm even writing this review is because of the free bed plate and ruler they include with every spool, I futzed up my build plate today, and had it not been for the one I had included with this filament, I would have been a grump for two days waiting for a replacement. Thank you overture ♥️👌Also, the ruler is perfect for leveling

Flexible and smooth prints with minor tuning needed

c.s. · 31 July 2025

This TPU filament is great for flexible prints — I’ve used it to make phone cases, grips, and wearable items. The finish is clean, and once I dialed in the right settings (slow print speed, high retraction), it ran very smoothly with no clogs. It’s not as easy to print as PLA, but that’s expected with TPU. Just make sure your extruder can handle flexibles. The spool came vacuum sealed and in perfect condition. Will definitely buy again.