Description:
Reviews:
5.0 out of 5 stars Does the job well.
I replace these build plate mats periodically. I find they work well and the 3d printed items adhere well. They do eventually wear out but I feel they endure pretty well. I buy these as I feel I can rely on the quality.They stick magnetically to the heated bed and I have not found a need for the self adhesive magnetic sheet supplied.
5.0 out of 5 stars Good flexible print bed
I have only used this a few times but so far I'm very pleased with the bed. It is much more flexible than my original bed and it is easier to remove prints from. The installation was easy enough, although it would be nice if it was directly compatible and I didn't have to install an additional layer to the bed - I have an ender 3 v2 Neo. Strong enough magnets but still very easy to remove from the bed.
5.0 out of 5 stars It sticks
The bed works okay and is very flexible. Easy to stick down, easy to take off and really easy to remove projects. The sticky magnets alsocoming useful if you've already got a magnetic bed. Win-win! It's slightly bigger than the S1 bed
2.0 out of 5 stars Buy PEI instead
This is rather inferior to even the stock glass in my opinion, adhesion isn’t as good (can have ripples, print a 220x220mm you’ll probably see it on the first layer), seems to be too compressible (which isn’t the best for 3d printing) and you can easy tear the surface. Recommend buying a pei sheet instead of this!
1.0 out of 5 stars Dreadful product. This product is significanlty flawed. Please read on...
Firstly I run 5 x Ender 3 V2's with great success at printing by flipping the default printer glass bed and printing on the shinny glass surface.I decided to buy one of these replacement mats as I have one particular print which is top heavy and poor supports on the lower section.Firstly if you have a ender 3 V2 you will need to use the double sided sticky part as the aluminium bed is not magenetic, so this is where the first problem is introduced as you now have a uneven sub-bed surface caused by air pockets and inconsisent presssure/adhesion across the printer bed.When the magnetic bed is attached it does hold well but clearly this is not going to be as flat as a glass bed so bed levelling (i.e. BL Touch etc) in my opinion is needed on every print as you have to remove the magnetic bed to attempt to wrestle your prints off.The print went well after fitting, bed levelling but when I went to remove the print it would simply not come of the bed. I removed the bed and with brute force I struggled to get the print of the bed.When it did come off the bed left a horrible finish and white/greyish marks all over the items printed.Even washing in soapy water failed to remove them so clearly something in the suface of the bed is now in my prints!When I inspected the matt after printing it now looks pulled/kinked from the force needed to remove the print so i have no confidence in using it again.I swiftly pulled the sticky magnetic coating of and swiftly reverted to my original glass bed.The bottom line is this.If you need this product for bed adhesion then you have not got your printer set up correctly.If you have BL Touch, a well put together printer which is checked, lubricated and kept spotlesssy clean and you take time to ensure all cam adjustments are tight so there is no lateral movement of the bed and axis then your prints will adhere to a very shinny glass surface without a problem.Also avoid cheap filaments and make sure you have print temps set correctly (guide 55-60 BED, 190-210 hot end) for most good quality PLA & PLA+.
3.0 out of 5 stars Alright bed but prints don't pop off, tool still needed
It's a decent bed for the price, installation was alright but a little fiddly to get right but overall sound.However, this is one downside and that's printing with thing rafts/brims, I would STRONGLY advise against it on this bed, the prints DO NOT just pop off when you bend the bed, you still have to use a tool, but a thin brim/raft will stick like superglue so just be wary.
5.0 out of 5 stars Highly Recommend
This product is fantastic.I have a Ender 3 pro that came with a glass bed, very quickly this started to not work as well as it did when it was new so I invested in this product.The adhesiveness is brilliant, prints come out clean and consistent, and the magnetic features makes removing the prints way easier.My auto leveller did lower my print head into the bed damaging and making around half of my bed unusable, after 6 months of printing in the exact same place the bed has stopped being so consistent, but I’ve had no hesitation to replace it with a new one.
1.0 out of 5 stars Not compatible and not much use
This mat suffers from a number of shortcomings, I own an Ender 3 Pro printer which it claims compatibility for. I bought this assuming it WOULD be compatible, as my mat is now very marked and ancient.1. Its simply too large, it fouls on the printer body when installed no matter how it is positioned, the only solution is to cut the mat down to size.2. Its magnetic properties are polarised 'side to side' whereas the original is 'lengthways' therefore it cannot be installed in the correct orientation, it needs to be at 90 degrees which is silly as then it doesn't fit due to its shape and the tab at front (which is no longer at the front!) of the mat.3. The solution is to remove the existing sticky pad on the hot plate and use the one supplied with the mat, something which then introduces the possibility of air bubbles AND is very difficult to do.I can see that I'm likely to actually change my printer as a result of this, as its utter nonsense and has made a bit of a mess of an otherwise perfectly good printer.I seriously doubt that this is a genuine Creality product, and if it is then they have certainly gone to the dogs with this one.I shall not be buying Creality products in the future.
Solid Upgrade for the Ender 3
Really happy with this glass bed. Prints stick well during the job, but once it cools down, they pop off without any effort. Way better than the original surface that came with the printer. It just works, and that’s exactly what I needed. Would definitely buy again.
Ottimo
Veramente ottimo e molto pratico
Magnetic bed
Looking forward to upgrade my stock bed with this magnetic bed!
Fácil de instalar.
Fácil de instalar, quedo exacta a mi ender 3 V2, con este aditamento te olvidas de estar poniendo fijador de cabello a la plancha, y se retiran muy rápido, aún me faltan probar varios materiales, pero con PLA funciona muy bien,
nie polecam
Magnes bardzo słaby, ledwo trzyma się stołu za to wydruki trzymają się tak mocno że trudno je oderwać. Moim zdaniem to nie jest oryginał.
Visit the Comgrow Store
Creality Original Ultra Flexible Removable Magnetic 3D Printer Build Surface Heated Bed Cover for Ender 3 S1/Ender 3/Ender 3 pro/Ender 3 V2/Ender 5 3D Printer 235 * 235 * 1mm
AED11952
Quantity:
Order today to get by 7-14 business days
Delivery fee of AED 20. Free for orders above AED 200.
'%3e%3crect%20x='0.599609'%20width='22.4'%20height='16'%20fill='%230A17A7'/%3e%3cpath%20fill-rule='evenodd'%20clip-rule='evenodd'%20d='M-0.426196%20-1.53223L9.1335%204.91587V-1.06506H14.4668V4.91648L24.0263%20-1.53147L25.2193%200.237148L17.6615%205.33494H23.0002V10.6683H17.6618L25.2187%2015.7655L24.0258%2017.5341L14.4668%2011.0865V17.0683H9.1335V11.0871L-0.425634%2017.5348L-1.61858%2015.7662L5.93947%2010.6683H0.600172V5.33494H5.93977L-1.61914%200.236387L-0.426196%20-1.53223Z'%20fill='white'/%3e%3cpath%20d='M15.5332%205.06615L25.6655%20-1.59961'%20stroke='%23DB1F35'%20stroke-width='0.533333'%20stroke-linecap='round'/%3e%3cpath%20d='M16.6094%2010.9578L25.6924%2017.0801'%20stroke='%23DB1F35'%20stroke-width='0.533333'%20stroke-linecap='round'/%3e%3cpath%20d='M7.00176%205.04727L-2.47266%20-1.33789'%20stroke='%23DB1F35'%20stroke-width='0.533333'%20stroke-linecap='round'/%3e%3cpath%20d='M8.02936%2010.8842L-2.47266%2017.8486'%20stroke='%23DB1F35'%20stroke-width='0.533333'%20stroke-linecap='round'/%3e%3cpath%20fill-rule='evenodd'%20clip-rule='evenodd'%20d='M0.599609%209.6H10.1996V16H13.3996V9.6H22.9996V6.4H13.3996V0H10.1996V6.4H0.599609V9.6Z'%20fill='%23E6273E'/%3e%3c/g%3e%3c/svg%3e)
Imported From: United Kingdom
At BOLO, we work hard to ensure the products you receive are new, genuine, and sourced from reputable suppliers.
BOLO is not an authorized or official retailer for most brands, nor are we affiliated with manufacturers unless specifically stated on a product page. Instead, we source verified sellers, authorized distributors or directly from the manufacturer.
Each product undergoes thorough inspection and verification at our consolidation and fulfilment centers to ensure it meets our strict authenticity and quality standards before being shipped and delivered to you.
If you ever have concerns regarding the authenticity of a product purchased from us, please contact Bolo Support. We will review your inquiry promptly and, if necessary, provide documentation verifying authenticity or offer a suitable resolution.
Your trust is our top priority, and we are committed to maintaining transparency and integrity in every transaction.
All product information, images, descriptions, and reviews originate from the manufacturer or from trusted sellers overseas. BOLO is not affiliated with, endorsed by, or an authorized retailer for most brands listed on our website unless stated otherwise.
While we strive to display accurate information, variations in packaging, labeling, instructions, or formulation may occasionally occur due to regional differences or supplier updates. For detailed or manufacturer-specific information, please contact the brand directly or reach out to BOLO Support for assistance.
Unless otherwise stated, all prices displayed on the product page include applicable taxes and import duties.
BOLO operates in accordance with the laws and regulations of United Arab Emirates. Any items found to be restricted or prohibited for sale within the UAE will be cancelled prior to shipment. We take proactive measures to ensure that only products permitted for sale in United Arab Emirates are listed on our website.
All items are shipped by air, and any products classified as “Dangerous Goods (DG)” under IATA regulations will be removed from the order and cancelled.
All orders are processed manually, and we make every effort to process them promptly once confirmed. Products cancelled due to the above reasons will be permanently removed from listings across the website.
Similar suggestions by Bolo
More from this brand
Similar items from “3D Printer Accessories”
Share with
Or share with link
https://www.bolo.ae/products/KO07K3JOACK
Visit the Comgrow Store
Creality Original Ultra Flexible Removable Magnetic 3D Printer Build Surface Heated Bed Cover for Ender 3 S1/Ender 3/Ender 3 pro/Ender 3 V2/Ender 5 3D Printer 235 * 235 * 1mm
AED11952
Quantity:
Order today to get by 7-14 business days
Delivery fee of AED 20. Free for orders above AED 200.
Imported From: United Kingdom
At BOLO, we work hard to ensure the products you receive are new, genuine, and sourced from reputable suppliers.
BOLO is not an authorized or official retailer for most brands, nor are we affiliated with manufacturers unless specifically stated on a product page. Instead, we source verified sellers, authorized distributors or directly from the manufacturer.
Each product undergoes thorough inspection and verification at our consolidation and fulfilment centers to ensure it meets our strict authenticity and quality standards before being shipped and delivered to you.
If you ever have concerns regarding the authenticity of a product purchased from us, please contact Bolo Support. We will review your inquiry promptly and, if necessary, provide documentation verifying authenticity or offer a suitable resolution.
Your trust is our top priority, and we are committed to maintaining transparency and integrity in every transaction.
All product information, images, descriptions, and reviews originate from the manufacturer or from trusted sellers overseas. BOLO is not affiliated with, endorsed by, or an authorized retailer for most brands listed on our website unless stated otherwise.
While we strive to display accurate information, variations in packaging, labeling, instructions, or formulation may occasionally occur due to regional differences or supplier updates. For detailed or manufacturer-specific information, please contact the brand directly or reach out to BOLO Support for assistance.
Unless otherwise stated, all prices displayed on the product page include applicable taxes and import duties.
BOLO operates in accordance with the laws and regulations of United Arab Emirates. Any items found to be restricted or prohibited for sale within the UAE will be cancelled prior to shipment. We take proactive measures to ensure that only products permitted for sale in United Arab Emirates are listed on our website.
All items are shipped by air, and any products classified as “Dangerous Goods (DG)” under IATA regulations will be removed from the order and cancelled.
All orders are processed manually, and we make every effort to process them promptly once confirmed. Products cancelled due to the above reasons will be permanently removed from listings across the website.
Description:
Reviews:
5.0 out of 5 stars Does the job well.
I replace these build plate mats periodically. I find they work well and the 3d printed items adhere well. They do eventually wear out but I feel they endure pretty well. I buy these as I feel I can rely on the quality.They stick magnetically to the heated bed and I have not found a need for the self adhesive magnetic sheet supplied.
5.0 out of 5 stars Good flexible print bed
I have only used this a few times but so far I'm very pleased with the bed. It is much more flexible than my original bed and it is easier to remove prints from. The installation was easy enough, although it would be nice if it was directly compatible and I didn't have to install an additional layer to the bed - I have an ender 3 v2 Neo. Strong enough magnets but still very easy to remove from the bed.
5.0 out of 5 stars It sticks
The bed works okay and is very flexible. Easy to stick down, easy to take off and really easy to remove projects. The sticky magnets alsocoming useful if you've already got a magnetic bed. Win-win! It's slightly bigger than the S1 bed
2.0 out of 5 stars Buy PEI instead
This is rather inferior to even the stock glass in my opinion, adhesion isn’t as good (can have ripples, print a 220x220mm you’ll probably see it on the first layer), seems to be too compressible (which isn’t the best for 3d printing) and you can easy tear the surface. Recommend buying a pei sheet instead of this!
1.0 out of 5 stars Dreadful product. This product is significanlty flawed. Please read on...
Firstly I run 5 x Ender 3 V2's with great success at printing by flipping the default printer glass bed and printing on the shinny glass surface.I decided to buy one of these replacement mats as I have one particular print which is top heavy and poor supports on the lower section.Firstly if you have a ender 3 V2 you will need to use the double sided sticky part as the aluminium bed is not magenetic, so this is where the first problem is introduced as you now have a uneven sub-bed surface caused by air pockets and inconsisent presssure/adhesion across the printer bed.When the magnetic bed is attached it does hold well but clearly this is not going to be as flat as a glass bed so bed levelling (i.e. BL Touch etc) in my opinion is needed on every print as you have to remove the magnetic bed to attempt to wrestle your prints off.The print went well after fitting, bed levelling but when I went to remove the print it would simply not come of the bed. I removed the bed and with brute force I struggled to get the print of the bed.When it did come off the bed left a horrible finish and white/greyish marks all over the items printed.Even washing in soapy water failed to remove them so clearly something in the suface of the bed is now in my prints!When I inspected the matt after printing it now looks pulled/kinked from the force needed to remove the print so i have no confidence in using it again.I swiftly pulled the sticky magnetic coating of and swiftly reverted to my original glass bed.The bottom line is this.If you need this product for bed adhesion then you have not got your printer set up correctly.If you have BL Touch, a well put together printer which is checked, lubricated and kept spotlesssy clean and you take time to ensure all cam adjustments are tight so there is no lateral movement of the bed and axis then your prints will adhere to a very shinny glass surface without a problem.Also avoid cheap filaments and make sure you have print temps set correctly (guide 55-60 BED, 190-210 hot end) for most good quality PLA & PLA+.
3.0 out of 5 stars Alright bed but prints don't pop off, tool still needed
It's a decent bed for the price, installation was alright but a little fiddly to get right but overall sound.However, this is one downside and that's printing with thing rafts/brims, I would STRONGLY advise against it on this bed, the prints DO NOT just pop off when you bend the bed, you still have to use a tool, but a thin brim/raft will stick like superglue so just be wary.
5.0 out of 5 stars Highly Recommend
This product is fantastic.I have a Ender 3 pro that came with a glass bed, very quickly this started to not work as well as it did when it was new so I invested in this product.The adhesiveness is brilliant, prints come out clean and consistent, and the magnetic features makes removing the prints way easier.My auto leveller did lower my print head into the bed damaging and making around half of my bed unusable, after 6 months of printing in the exact same place the bed has stopped being so consistent, but I’ve had no hesitation to replace it with a new one.
1.0 out of 5 stars Not compatible and not much use
This mat suffers from a number of shortcomings, I own an Ender 3 Pro printer which it claims compatibility for. I bought this assuming it WOULD be compatible, as my mat is now very marked and ancient.1. Its simply too large, it fouls on the printer body when installed no matter how it is positioned, the only solution is to cut the mat down to size.2. Its magnetic properties are polarised 'side to side' whereas the original is 'lengthways' therefore it cannot be installed in the correct orientation, it needs to be at 90 degrees which is silly as then it doesn't fit due to its shape and the tab at front (which is no longer at the front!) of the mat.3. The solution is to remove the existing sticky pad on the hot plate and use the one supplied with the mat, something which then introduces the possibility of air bubbles AND is very difficult to do.I can see that I'm likely to actually change my printer as a result of this, as its utter nonsense and has made a bit of a mess of an otherwise perfectly good printer.I seriously doubt that this is a genuine Creality product, and if it is then they have certainly gone to the dogs with this one.I shall not be buying Creality products in the future.
Solid Upgrade for the Ender 3
Really happy with this glass bed. Prints stick well during the job, but once it cools down, they pop off without any effort. Way better than the original surface that came with the printer. It just works, and that’s exactly what I needed. Would definitely buy again.
Ottimo
Veramente ottimo e molto pratico
Magnetic bed
Looking forward to upgrade my stock bed with this magnetic bed!
Fácil de instalar.
Fácil de instalar, quedo exacta a mi ender 3 V2, con este aditamento te olvidas de estar poniendo fijador de cabello a la plancha, y se retiran muy rápido, aún me faltan probar varios materiales, pero con PLA funciona muy bien,
nie polecam
Magnes bardzo słaby, ledwo trzyma się stołu za to wydruki trzymają się tak mocno że trudno je oderwać. Moim zdaniem to nie jest oryginał.
Similar suggestions by Bolo
More from this brand
Similar items from “3D Printer Accessories”
Share with
Or share with link
https://www.bolo.ae/products/KO07K3JOACK