5.0 out of 5 stars Great brackets, bit pricey - but worth it

M.R. · 19 September 2016

Bought five of these to support 4* 3020's and a 3090C, and am glad I did. I nearly went for some cheaper universal supports but decided to try these after the good reviews. Four screws to attach them to the wall (not supplied) and then screw the bolt into the bottom of each speaker using the supplied Allen key. They hold firm and secure and you get immediate confidence they aren't going to sag, or worse. The speakers bounce a little so probably not as good as shelf mounting but not far off.My only real problems with these was they allow tilting left, right and down, but not up. My centre speaker needed to point up slightly being under the tv and the bracket would not allow me to do this unfortunately. With some lateral thinking, I managed to chock the bracket up slightly using an angled rubber wedge so all was good. The 3090C has quite a wide spread anyway so the tilt was not as critical as I thought it might be.These come in a nicely packaged box and there are a white and black cowels supplied so if you have white speakers, you can put the white cowel on for a more appropriate finish. I found the cowels to be a bit wobbly and am worried they might rattle but so far, so good. I'm not even too sure I've got them on properly as they are quite tricky to attach.Great brackets, expensive but worth it.

5.0 out of 5 stars Easy to install and plenty of adjustment.

F. · 30 August 2021

Perfect for my 3010i speakers, these are pretty heavy little speakers and needed to wall mount them for surrounds as part of my 5.1 setup. These brackets are perfect for the job, plenty of adjustability and really sturdy.Not ideal for banana plugs unless you slide the speaker forward in its track to its maximum adjustment, bare wire or spade connectors would be my suggestion.Not screws or plugs included so something to be aware of and account for (I used 5cm screws and 5cm/8mm heavy duty plugs into a brick wall).

4.0 out of 5 stars Enables quick and accurate installation of Q Acoustics 3020 and 3090 speakers.

H.C. · 2 January 2020

Used these brackets with the intended Q Acoustics speakers. Four screw holes to take your choice of wall fittings. Two holes are elongate to allow some adjustment during fitting but these were still a bit persnickety to align the speakers with: the Q3020 and Q3090 are big speakers and magnify any visual misalignment. Enough freedom of movement to allow toeing in or angling down but not up (if you have a low centre speaker below your TV for example).All in all a good, simple, well designed and robust product and worth the investment for neat installation of speakers.

5.0 out of 5 stars Nicely designed affordable brackets

J.D. · 17 June 2022

I recently invested in a Q Acoustics setup, my first foray into surround sound having always had Stereo setups up to this point.These brackets are used for my 3010i surrounds.Having struggled with universal wall mounts in the past, to me these were a joy to install and took only a few minutes. The plastic covers (which come in both black and white) are a very nice touch.Buy some fixing hardware, as the brackets don't come with plugs/screws - not a problem because supplied fixings are never usually all that good.The other bonus is that you can use the same bracket for the 3090Ci centre speaker, which I may do in the future if my setup changes.Are they good value? I would say yes, considering their design, build quality and the addition of the plastic covers.

5.0 out of 5 stars Excellent - using them with 3020i

H.M. · 6 January 2021

I was impressed with the quality of the brackets as soon as I opened the box, although, first impression made me think they were a little'undersized' - especially considering the weight of the 3020i's. I needed had worried. With well fixed expanding bolts into a solid wall, these brackets arent going anywhere.

5.0 out of 5 stars The Best

S. · 21 May 2020

I have three of these two of which are holding a pair of 3010i's as front high mounts, these are not an inconsiderableweight but the sturdiness of the brackets means that there is no chance of them failing, fitting is a simple matter of marking the wall, drilling the holes and using rawlplugs to screw into, they are then attached firmly and hold the speaker firmly even when tilted downmy other bracket is holding a 3090c centre speaker which is twice the weight of the 3010's but again it is held in place with no movement or chance of falling, using the supplied allen key it is easy to tilt or rotate the speakers to suit your needs, i thoroughly recommend these.

Good quality and works great

M.A.F.C. · 8 December 2018

Good quality and works great

Excellente qualité

l. · 6 August 2018

Support robuste et esthétique , livré avec 2 caches: blancs et noirs pour s'accommoder avec l'environnement; très pratique.les enceintes sont réglables dans les 2 sens ( droite-gauche et haut-bas) mais seulement de 30° environ à droite et gauche ..cette limitation est fonction de la profondeur de l'enceinte, QA3020 pour ce qui me concerne

Pareja de soportes imprescindibles para altavoces q acoustics

G. · 12 February 2021

Soportes de muy buena calidad y muy esteticos. Quedan de cine con mis q acoustics 3010. Los tengo tanto en los frontales como en los traseros y permiten jugar con el ángulo y la inclinación . Ademas traen dos embellecedores, uno negro y otro blanco, para conjuntar con el color de tu altavoz

Ottimi

m. · 3 May 2017

Il supporto in questione (ne ho acquistati 2) funziona egregiamente sulle q acoustic 3020. La regolazione orizzontale e verticale avviene con chiave esagonale (fornita) e la zona dello snodo può essere coperta da apposito carter (fornito nei colori nero e bianco). L'ho fissato al muro con 4 tasselli da 6 mm.

Hochwertig

A. · 13 April 2019

Passen perfekt und sind unauffällig.