5.0 out of 5 stars Fantastic product

D. · 2 September 2018

High quality packaging and products within.To definitely get your moneys worth on this one.With the book included it makes it nice and easy to follow and outlines the fundamental basics of how and why the product is used.For me the book is the reason for the high review. It is of a high quality. Very detailed and down to the basic level.First project in parallel circuit. Takes a litttle while for me as I have sausage fingers. So placing the wires can be fiddley.Only gripe was the box was a little torn. So I’ve had to repair with some tape. But hey that’s life and it’s only a box.I have seen reviews online about the starter book being wrong with technical data but I’ve yet to notice them. My education level is of HNC in mechanical engineering (UK)I work in a mechanical/electrical maintenance job.Would highly recommend to anyone looking to learn some electronics and code.

5.0 out of 5 stars Don't just sit there - buy one!

W.R. · 15 December 2014

Amazing kit - everything you need to get started with microcontroller electronics. Well packed and with a very good projects book to get you started. If you're already in to programming, and use Visual Studio, you can also get a free Arduino plugin from Visual Micro, and do all your Arduino programming from there (the Arduino programming interface is OK, and works well, but might seem a bit limited if you're used to something with more functionality, like Visual Studio). And there's lots of other free stuff out there as well - make sure you check out the main Arduino web site, as a good starting point.All in all, well worth the money, and could be the start of a lifetime's obsession!

5.0 out of 5 stars A fantastic entry point into Arduino

M. · 7 March 2022

The book included with this kit is great!All the projects are fun and it is easy to follow along with them.This is an amazing way to get to grips with electronics.All the code needed is in the book, so don’t worry if you have no experience.Also, if you are stuck, the Arduino IDE has the sketches (programs) for these projects built in.Please be aware that you will need a PC/Laptop in order to program this.

4.0 out of 5 stars Overall a good kit but let down by poor quality components

S. · 17 April 2020

Expensive for what is supplied. Some components of poor quality, particularly the Tilt Sensor which was very difficult to attach to the breadboard, and the Peizo which would not function as a Knock Sensor.The manual supplied was very good in all aspects, and I suspect the high price is due to the manual and the fact that product is genuine Arduino.There is no provision for storing the components, a nice plastic storage box with compartments would be useful and considering the price of the kit I think this should be included.Support from Arduino via email was excellent.

5.0 out of 5 stars Arduino UNO - an excellent introduction

j. · 22 July 2018

This is genuine Arduino item - extremely well packaged and presented - and as far as I can see by doing comparisons supersedes the original Arduino UNO starter kit. I bought this in preference to the clones which are significantly cheaper primarily because I felt that I ought to give myself the best chance of success - time to use the clones once I know what I am doing :-)Altho a fully qualified engineer I decided to work my way thro the projects in the book (an age thing-I never used to !!) as I have not played with these particular devices before - and I found the book was very useful - even though I knew the theory behind the ccts the practice of setting up etc as advised was very good and it shows both a cct diagram and a picture of the completed board. If you are a cct designer - you will probably find it a bit simple - but this is a starter kit. It also introduces you to the programming of these devices - if you have MicroSoft Basic" programming experience you should have no problem programming this device - the languages are not the same but there are obvious similarities. There are also many on line tutorials but I can already see some very useful ideas/projects that I can implement on my model railway.!!Some beginner comments (cognoscenti look away now!!) Check all the components before doing anything else - It is worth having a simple multimeter to check the resistors as some are 4 band and some 5 - get it wrong and you might blow the LEDs or the cct may not work - if you are knocking on a bit it is also worth having a magnifying glass to see some of the bands - particularly the yellows! - I actually labelled each section (not each resistor !!) on the resistor strip with the value to save time later.Note in doing setup the wooden mounting plate is now plasticI found it useful to put in a small (3mm deep) 4mm o.d. collar between the plastic mounting board and the Uno itself on each fixing bolt as the soldered connections on the back of the board can otherwise interfere with the level seating of the Uno on the board - not essential but.....it does allow you to tighten up mounting bolts without distorting the UNO PCB.Additional tools I found useful are tweezers for picking up components, and a pair of narrow (snipe) nose pliers - some of the holes in the breadboard are a wee bit tight and the component legs need to be pushed in quite firmly to seat properly - the pliers are for the fumbly-fingered among us - they allow you to grasp the leg very close to the hole so the leg doesn't buckle as you push. Finally the LEDS - note once installed you cannot tell which is the long leg and which the short because unlike the diagrams the LED legs are straight - I put a kink in the long leg - if you do do this make sure you hold the leg adjacent to the LED and put the kink on the open leg side not the LED side - DO NOT bend or strain the leg at the point it joins the LED - you may well break the LED !!All in all I am very happy with my seriously discounted purchase ( :-) )and am already plotting which add-on shields I need.

Awesome !!!

M.D. · 1 October 2015

Arduino Starter Kit is amazing microcontroller for beginners. All the electrical components are included in the packet for projects. I liked the projects and programming environment both. The starter kit gives a good hold to understand execution of electronic projects. Sooner or later intermediate and advanced kits may be available - I will definitely like to buy them.Update on 3rd October 2015:I have placed another order. The 170 page manual is printed on good quality paper - the reading experience was good. I prefer to have a pdf file - I am unable to obtain it online. Could I get a link to download ?

Brilliant Product! Lots of fun.

R.J. · 20 December 2014

This kit is awesome. I highly recommend this to anyone that has an interest in electronics and/or programming. While I am a seasoned programmer, I had no electronics experience prior to purchasing this kit. Recently I've found myself yearning to build electronic projects and figured this would be a good place to start given it's a fairly comprehensive starter kit.First, I'll start with the packaging. The packaging on this kit is very sexy, much like an Apple product. The design and style are simple and beautiful, the various items included in the kit are all nicely packaged in their individual boxes, and everything fits together very nicely. The unboxing feels like an experience. I realize some people may not care about the packaging, but if you're considering giving this kit as a gift, it makes a difference and will have an impact.As far as all the components included in the kit, I'm not an expert but it feels like a great starter kit and has a lot of very useful components in it, as well as lots of goodies and extras. There's enough in this kit to tackle a lot of projects and it feels like a solid base to start from. Some people have mentioned that you can purchase all these components cheaper if you source them out individually. I highly doubt the hours one would waste tracking down everything individually would justify the savings. After all this kit is not terribly expensive for what you get.Not to mention, one of the best things in this kit is the book. It's got lots of great projects in it that teach you both electronics and programming in the process. It's well written and easy to understand, even for a novice to electronics such as myself. As a programmer I do have to speak to the programming side of the book which in my opinion could be a bit more detailed for those who do not have experience with programming. That said, it's better than average and I do feel you'll learn to code in the process of going thru these projects. Overall, it feels like a well thought out and thurough course, with each chapter building on the next.In sum, this kit is really fun. I have no hesitation recommending this product. I guarantee you will thoroughly enjoy it, have a lot of fun, and learn some things in the process. This kit would make a fantastic gift for anyone interested in programming and/or electronics, and would also be a great thing for parents/grandparents and their kids to do together.

Wonderful Starter Kit

A. · 4 September 2024

This really is a nice kit to play with. The book is very well made and the projects are interesting and increase in difficulty as you progress. Great gift for anyone interested in tech!

Great

A. · 17 July 2019

I like it very much

Es muy bueno, pero trae pocas cosas.

D.R. · 28 June 2023

La verdad que es muy bueno, es de muy buena calidad y me gustan las cosas que trae, pero no estaría mal incluir unos elementos más.